The authors thank Tyra Witt, Cheri Mueske, Brant Newman and Dr. Peter J. Psaltis, MBBS, PhD for their valuable contributions. This study was financially supported by European Regional Development Fund &#8211; FNUSA-ICRC (No. CZ.1.05/1.100/02.0123), American Heart Association Scientist Development Grant (AHA #06-35185N), National Institutes of Health (T32HL007111) and The Grainger Innovation Fund &#8211; Grainger Foundation.

All animal studies were approved by the Institutional Animal Care and Utilization Committee (IACUC) at Mayo Clinic.
1. Design and Analysis of a 2205 Stainless Steel Stent
<ol>
	<li>Designing a bare metal stent using CAD
	<ol>
		<li>Make an extruded hollow cylinder by selecting on &#8216;extruded boss/base&#8217; feature with the wall thickness equal to the stent strut thickness.</li>
		<li>Design a stent pattern on a different sketch plane tangential to the extruded cylinder. Make the width of the flat pattern to match the circumference of the extruded hollow cylinder.</li>
		<li>Transfer the flat pattern design onto the hollow cylinder using the wrap feature.</li>
		<li>Save the part in its native format and also in ACIS format to be exported for FEA.</li>
	</ol>
	</li>
	<li>Finite element analysis for stent models
	<ol>
		<li>Import the solid geometry saved in ACIS format into the part module of the FEA software for further analysis.</li>
		<li>Model 2 analytical cylinders coaxially to the stent in the part modeler of the FEA software. The outer cylinder has an initial diameter larger than the diameter of the stent to simulate the crimper and the inner cylinder has an initial diameter of 1 mm to simulate a balloon for inflation.</li>
		<li>Double click on the &#8216;instances&#8217; tree item of the assembly modeler to assemble the above said parts in relative positions.</li>
		<li>Use the mesh module of the FEA software, specify the element type as 20-node hexahedral element with reduced integration, specify the element size, and mesh the stent.</li>
		<li>Specify frictionless rigid contact pairs between the stent and the two cylinders respectively in the &#8216;interaction properties&#8217; of the model tree.</li>
		<li>Assign elasto-plastic stress-strain behavior of 2205 stainless steel to the stent model.</li>
		<li>Define boundary conditions to firstly crimp the outer cylinder to 1 mm which simulates the crimping of the stent. Remove the outer cylinder to simulate the relaxation of the crimped stent. Expand the inner cylinder to 3 mm to simulate expansion and finally, remove the inner cylinder to simulate recoil of the stent.</li>
		<li>Define the simulation parameters including the number of processors and amount of RAM allocated in the &#8216;Analysis&#8217; model tree item and run the simulation.</li>
		<li>Once the simulation is complete, open the result file (filename.odb) and post-process the results to study the principal strains and iteratively improve the stent design to achieve a principal strain of 20% which is less than the failure limit of the material.</li>
	</ol>
	</li>
</ol>
2. Stent Fabrication and Testing for Crimping and Expansion
<ol>
	<li>Stent fabrication
	<ol>
		<li>Obtain the 2205 stainless steel tubes by gun drilling and precision grinding bar stock material at a precision machining company such as Action Precision Products in Pioneer, OH.</li>
		<li>Transfer the precision ground tubes and the flat pattern stent design to a stent cutting company such as Laserage Technology Corporation in Waukegan, IL for laser cutting and electropolishing.</li>
		<li>Passivate the surface of the electropolished stents by submersing them in a strong acid (50% HCl) for 10 min followed by a base (10% NaHCO3) for another 10 min. CAUTION: handle chemicals with proper protective equipment and under a fume hood. Finally, wash the stents with ethyl alcohol and deionized water. This process is called acid pickling.</li>
	</ol>
	</li>
	<li>Testing of manufactured stent for crimping and expansion
	<ol>
		<li>Crimp the stent onto a trifold balloon using a hand held crimping tool. Hold the stent and the trifold balloon in the crimping tool. Press the handle to radially deform the stent to be crimped on the balloon.</li>
		<li>Inspect the crimped stent using a microscope for uniform crimping and any signs of failure in the structure due to plastic deformation.</li>
		<li>Expand it to the designed diameter of 3 mm by pressurizing the trifold balloon with water. Examine the expanded stents for microscopic fractures and uniform expansion.</li>
	</ol>
	</li>
</ol>
3. Characterization of Stent for Retained Magnetic Field
NOTE: Cylindrical magnet of 2 inch diameter and 1 inch height was used in this study. The poles of the magnet are aligned along the axis. The surface magnetic flux density of the magnet is approximately 1 T.
<ol>
	<li>Magnetize the stents diametrically or axially using a strong neodymium magnet.&#160; Hold the stent close to the strong magnet for approximately 1 min for magnetization.</li>
	<li>Hold the stent on one of the flat faces with its diameter along the magnetic field lines to be magnetized diametrically or hold the stent next to the cylindrical surface with its axis along the magnetic field lines to magnetize it axially. Retained magnetic field of the stent was found to be stable for at least 24 hr, but use the stent as soon as possible after magnetization.</li>
	<li>Mount the stents individually onto glass mandrels and then mount the glass mandrels in the precision chuck of the magnetic probing fixture. Magnetic microsensor probe can be precisely positioned close to the stent without touching the surface using the XYZ stages assembly of the magnetic probing fixture (Figure 4).</li>
	<li>Measure the baseline reading of the magnetic microsensor far away from the stent and then measure the retained magnetic field at the stent&#39;s surface by positioning the probe using the XYZ stages of the magnetic probing fixture.</li>
</ol>
4. Magnetic Cell Capture Studies
<ol>
	<li>Obtaining cells, labeling with SPION and staining with fluorescent dye
	<ol>
		<li>Derive the endothelial outgrowth cells (EOC) from porcine peripheral blood as described in5,7. Culture in a T-75 flask until approximately 80% confluent (5x106 to 8x106 cells).</li>
		<li>Synthesize SPIONs as 10 nm diameter magnetite (Fe3O4) core surrounded by 50 nm thick poly(lactic-co-glycolic acid) (PLGA) shell as described in 8,9.</li>
		<li>Incubate the derived EOC with SPION at a concentration of 200 &#181;g/ml of cell culture medium for 16 hr at 37 oC.</li>
		<li>Aspirate the cell culture medium gently. Gently wash the cells by adding 10 ml of phosphate-buffered saline (PBS) to the flask, rocking, and aspirating the PBS.</li>
		<li>Stain the cells with fluorescent dye (CM-DiI) for visualizing during experiments. This is done per the manufacturer&#8217;s instructions by adding the dye to 10 ml of cell culture medium at a concentration of 5 &#181;l/ml and incubating with the cells for 30 min at 37 &#176;C.</li>
		<li>Wash the cells with PBS as in step 4.1.4 and incubate with 3 ml of 0.25% trypsin-EDTA solution for 5 min at 37 &#176;C to lift the cells from the flask.</li>
		<li>Transfer the cell suspension to a 15 ml conical tube, top off with PBS, and centrifuge at 500 x g for 5 min to form a cell pellet.</li>
		<li>Re-suspend the cell pellet in PBS at a concentration of 1-2x106 cells/ml and mix thoroughly by pipetting in and out of the conical tube several times.</li>
	</ol>
	</li>
	<li>In-vitro cell studies
	<ol>
		<li>Design and fabricate (e.g., 3D printing) a simple fixture to hold the stent just above the surface of a glass coverslip.</li>
		<li>Demagnetize a stent using an electromagnetic degausser or magnetize a stent diametrically or axially using a strong neodymium magnet.</li>
		<li>Pipette the SPION-labeled EOC suspended in PBS into the dish containing the axially magnetized or diametrically magnetized or non-magnetized control stents. Image the stents with EOC suspended in PBS immediately for fluorescence using an inverted fluorescence microscope.</li>
	</ol>
	</li>
</ol>
5. In-vivo Animal Studies
<ol>
	<li>Stent implantation
	<ol>
		<li>Draw peripheral blood from 4 healthy Yorkshire pigs &#8211; weighing approximately 50 kg &#8211; 3 weeks prior to stent implantation respectively and culture EOC as described in 5,7.</li>
		<li>Administer anti-platelet medication starting 3 days prior to surgery (aspirin 325 mg and clopidogrel 75 mg daily).</li>
		<li>On the stent implantation day, anesthetize the pigs with intramuscular Telazol, Xylazine, and Atropine (5/2-3/0.05 mg/kg respectively) as stated in the applicable institutional animal care and use guidelines.</li>
		<li>Intubate and place the pig on inhalation of 1-2.5% Isoflurane anesthesia.</li>
		<li>Shave the ventral neck region of the pig and conduct the procedure in general sterile conditions.</li>
		<li>Implant 1 magnetized and 1 non-magnetized stent into the right coronary artery (RCA) using standard cardiac catheterization technique.
		<ol>
			<li>Catheterization of animals should be performed by a trained interventional cardiologist. Access the right carotid artery with a 9 French sheath.</li>
			<li>Cannulate the target coronary artery and inject iodinated contrast dye to obtain fluoroscopic images.</li>
			<li>Place a 0.014 inch standard coronary guidewire in the artery. Advance the balloon and stent using this guide wire and deploy the stent in a 3-3.5 mm diameter vessel.</li>
		</ol>
		</li>
		<li>Occlude the blood flow within the RCA proximal to the implanted stents using an over the wire balloon and deliver approximately 2x106 autologous EOC labeled with SPION suspended in 4 ml of PBS via the central catheter over a 2 min period.</li>
		<li>Restore blood flow to the RCA after 2 min of additional occlusion.</li>
		<li>Transfer the animal to the recovery room and closely monitor the animal until it has regained consciousness.</li>
		<li>Continue to administer anti-platelet medication (aspirin 325 mg and clopidogrel 75 mg) post operatively until sacrifice.</li>
	</ol>
	</li>
	<li>Stent explant and histology
	<ol>
		<li>Euthanize the animals 7 days after surgery by first anesthetizing the animal as explained previously and then administer intravenously a lethal dose of sodium pentobarbital (100 mg/kg) as per applicable institutional animal care and use guidelines.</li>
		<li>Surgically harvest the stented arterial segments. Fix the explanted arteries in 10% formalin buffer for a minimum of 30 min. Leave the samples in formalin buffer for further histological analysis.</li>
		<li>Outsource the fixed sample to facilities capable of performing histology with metal stents. During this processing, the samples are embed in methylmethacrylate, cross-sectioned, and analyzed histologically using Mallory&#8217;s staining technique with Prussian blue stain for iron particles.</li>
	</ol>
	</li>
</ol>

<ol>
	<li>Garg, S., Serruys, P. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coronary+stents:+current+status.">Coronary stents: current status.</a> J Am Coll Cardiol. 56, 1-42 (2010).</li><li>Austin, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Drug-eluting+stents+versus+bare-metal+stents+for+off-label+indications:+a+propensity+score-matched+outcome+study.">Drug-eluting stents versus bare-metal stents for off-label indications: a propensity score-matched outcome study.</a> Circ Cardiovasc Interv. 1 (1), 45-52 (2008).</li><li>Polyak, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+field+gradient+targeting+of+magnetic+nanoparticle-loaded+endothelial+cells+to+the+surfaces+of+steel+stents.">High field gradient targeting of magnetic nanoparticle-loaded endothelial cells to the surfaces of steel stents.</a> P Natl Acad Sci USA. 105 (2), 698-703 (2008).</li><li>Tassiopoulos, A. K., Greisler, H. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Angiogenic+mechanisms+of+endothelialization+of+cardiovascular+implants:+a+review+of+recent+investigative+strategies.">Angiogenic mechanisms of endothelialization of cardiovascular implants: a review of recent investigative strategies.</a> J Biomat Sci-Polym E. 11 (11), 1275-1284 (2000).</li><li>Pislaru, S. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+forces+enable+rapid+endothelialization+of+synthetic+vascular+grafts.">Magnetic forces enable rapid endothelialization of synthetic vascular grafts.</a> Circulation. 114, I314-I318 (2006).</li><li>Uthamaraj, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+validation+of+a+novel+ferromagnetic+bare+metal+stent+capable+of+capturing+and+retaining+endothelial+cells).">Design and validation of a novel ferromagnetic bare metal stent capable of capturing and retaining endothelial cells).</a> Ann Biomed Eng. 42 (12), 2416-2424 (2014).</li><li>Gulati, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diverse+origin+and+function+of+cells+with+endothelial+phenotype+obtained+from+adult+human+blood.">Diverse origin and function of cells with endothelial phenotype obtained from adult human blood.</a> Circ Res. 93 (11), 1023-1025 (2003).</li><li>Lee, S. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoparticles+of+magnetic+ferric+oxides+encapsulated+with+poly(D,L+latide-co-glycolide)+and+their+applications+to+magnetic+resonance+imaging+contrast+agent.">Nanoparticles of magnetic ferric oxides encapsulated with poly(D,L latide-co-glycolide) and their applications to magnetic resonance imaging contrast agent.</a> J Magn Magn Mater. 272 (3 Special Issue), 2432-2433 (2004).</li><li>Lee, S. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+enhancement+of+iron+oxide+nanoparticles+encapsulated+with+poly(D,L-latide-co-glycolide).">Magnetic enhancement of iron oxide nanoparticles encapsulated with poly(D,L-latide-co-glycolide).</a> Colloid Surface A. (1-3), 255-251 (1016).</li><li>Forbes, Z. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Locally+targeted+drug+delivery+to+magnetic+stents+for+therapeutic+applications.">Locally targeted drug delivery to magnetic stents for therapeutic applications.</a> Computer Architectures for Machine Perception, 2003 IEEE International Workshop on. , 1-6 (2003).</li><li>Rathel, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+Stents+Retain+Nanoparticle-Bound+Antirestenotic+Drugs+Transported+by+Lipid+Microbubbles.">Magnetic Stents Retain Nanoparticle-Bound Antirestenotic Drugs Transported by Lipid Microbubbles.</a> Pharm Res-Dordr. 29 (5), 1295-1307 (2012).</li><li>Gunn, J., Cumberland, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stent+coatings+and+local+drug+delivery+-+state+of+the+art.">Stent coatings and local drug delivery - state of the art.</a> Eur Heart J. 20 (23), 1693-1700 (1999).</li><li>Lu, A., Jia, G., Gao, G., Wang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+magnetic+stent+on+coronary+restenosis+after+percutaneous+transluminal+coronary+angioplasty+in+dogs.">The effect of magnetic stent on coronary restenosis after percutaneous transluminal coronary angioplasty in dogs.</a> Chin Med J (Engl. 114 (8), 821-823 (2001).</li><li>Kempe, H., Kempe, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+use+of+magnetite+nanoparticles+for+implant-assisted+magnetic+drug+targeting+in+thrombolytic+therapy.">The use of magnetite nanoparticles for implant-assisted magnetic drug targeting in thrombolytic therapy.</a> Biomaterials. 31 (36), 9499-9510 (2010).</li><li>Chorny, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Targeting+stents+with+local+delivery+of+paclitaxel-loaded+magnetic+nanoparticles+using+uniform+fields.">Targeting stents with local delivery of paclitaxel-loaded magnetic nanoparticles using uniform fields.</a> P Natl Acad Sci USA. 107 (18), 8346-8351 (2010).</li><li>Polyak, B., Friedman, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+targeting+for+site-specific+drug+delivery:+applications+and+clinical+potential.">Magnetic targeting for site-specific drug delivery: applications and clinical potential.</a> Expert Opin Drug Del. 6 (1), 53-70 (2009).</li><li>Liu, J. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+stent+hyperthermia+for+esophageal+cancer:+an+in+vitro+investigation+in+the+ECA-109+cell+line.">Magnetic stent hyperthermia for esophageal cancer: an in vitro investigation in the ECA-109 cell line.</a> Oncol Rep. 27 (3), 791-797 (2012).</li><li>Gunn, J., Cumberland, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Does+stent+design+influence+restenosis.">Does stent design influence restenosis.</a> Eur Heart J. 20 (14), 1009-1013 (1999).</li><li>Aviles, M. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+study+of+ferromagnetic+stents+for+implant+assisted-magnetic+drug+targeting.">In vitro study of ferromagnetic stents for implant assisted-magnetic drug targeting.</a> J Magn Magn Mater. 311 (1), 306-311 (2007).</li><li>Mardinoglu, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theoretical+modelling+of+physiologically+stretched+vessel+in+magnetisable+stent+assisted+magnetic+drug+targeting+application.">Theoretical modelling of physiologically stretched vessel in magnetisable stent assisted magnetic drug targeting application.</a> J Magn Magn Mater. 323 (3-4), 324-329 (2011).</li><li>Liu, Z. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stress+corrosion+cracking+of+2205+duplex+stainless+steel+in+H2S-CO2+environment.">Stress corrosion cracking of 2205 duplex stainless steel in H2S-CO2 environment.</a> J Mater Sci. 44 (16), 4228-4234 (2009).</li><li>Alverez-Armas, I., Degallaix-Moreuill, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Duplex stainless steels. , (2009).</li><li>Tefft, B. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetizable+Duplex+Steel+Stents+Enable+Endothelial+Cell+Capture.">Magnetizable Duplex Steel Stents Enable Endothelial Cell Capture.</a> Ieee T Magn. 49 (1), 463-466 (2013).</li><li>Pelton, A. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fatigue+and+durability+of+Nitinol+stents.">Fatigue and durability of Nitinol stents.</a> J Mech Behav Biomed Mater. 1 (2), 153-164 (2008).</li><li>Knowles, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Finite+element+analysis+of+a+balloon-expandable+stent+and+superior+mesenteric+arterial+wall+interaction.">Finite element analysis of a balloon-expandable stent and superior mesenteric arterial wall interaction.</a> J Vasc Surg. 60 (6), 1722-1723 (2014).</li><li>Veeram Reddy, S. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+biodegradable+stent+applicable+for+use+in+congenital+heart+disease:+bench+testing+and+feasibility+results+in+a+rabbit+model.">A novel biodegradable stent applicable for use in congenital heart disease: bench testing and feasibility results in a rabbit model.</a> Catheter Cardiovasc Interv. 83 (3), 448-456 (2014).</li><li>Shellock, F. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MR+imaging+of+metallic+implants+and+materials:+a+compilation+of+the+literature.">MR imaging of metallic implants and materials: a compilation of the literature.</a> AJR Am J Roentgenol. 151 (4), 811-814 (1988).</li><li>Lopic, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+determination+of+magnetic+force+on+a+coronary+stent+in+MRI.">Quantitative determination of magnetic force on a coronary stent in MRI.</a> J Magn Reson Imaging. 37 (2), 391-397 (2013).</li></ol>

The authors declare that they have no competing financial interests.

We developed a magnetic stent which can function as a bare metal stent and can attract SPION-labeled endothelial cells. In previous studies involving magnetic stents, researchers have used nickel coated commercial stents and coils or meshes made of magnetic materials due to the unavailability of a ferromagnetic stent5,10-14. Other groups have also used the paramagnetic nature of commercially available 304-grade stainless steel stents for targeting nanoparticle loaded endothelial cells3. Nickel coati...

Patients implanted with vascular stents manufactured from thrombogenic materials like stainless steel, cobalt chromium, and platinum chromium &#8211; both bare metal stents (BMS) and drug eluting stents (DES) &#8211; need anti-platelet therapy to prevent thrombus formation. BMS heal rapidly, but are subject to late stage restenosis due to incomplete healing. DES require long term anti-platelet therapy due to delayed healing. Anti-platelet therapy administered to avoid thrombosis as a result of incomplete or delayed healing leads to increased bleeding risk and may not be suitable for certain patients1,2. An ideal stent will heal completely and quickly thus avoiding long-term anti-platelet therapy and late stage restenosis. This complete healing can only be achieved if the stent is rapidly coated with a monolayer of endothelial cells after implantation. Coating the stents with biocompatible materials such as gold or other biopolymers has been shown to improve thrombo-resistance, but none of these techniques achieved ideal blood compatibility as may be possible by coating with endothelial cells3,4.
A stent can be coated with endothelial cells post implantation by attracting circulating progenitor cells. This self-seeding technique can be achieved by utilizing ligands and antibodies. But this technique is limited by the low number of circulating endothelial progenitor cells. A promising strategy is to deliver cells directly to the stent immediately following implantation during a short period of blood flow occlusion3,5. This strategy requires a technique for rapidly capturing cells and retaining them on the stent even after restoring blood flow. We have developed a technique in which a magnetic stent is used to attract and retain magnetically-labeled endothelial cells delivered post implantation. To achieve this, a functional BMS with sufficient magnetic properties to capture and retain magnetically-labeled endothelial cells is required6.
In this paper, we discuss the methods for designing, manufacturing, and testing a 2205 stainless steel stent. The stents were designed using CAD and FEA. The manufactured stents were magnetized using a neodymium magnet and the retained magnetic field was measured using a magneto-resistance microsensor probe. We then tested the stents for magnetically-labeled cell capture in a culture dish during our in-vitro experiments. Finally, the stents were tested in-vivo by implanting magnetic and non-magnetic stents in 4 pigs and histologically analyzing the stented arteries.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>2205 Stainless steel</td>
			<td>Carpenter Technology Corporation</td>
			<td>N/A</td>
			<td>Round bar stock material</td>
		</tr>
		<tr>
			<td>Abaqus</td>
			<td>Dassault systems</td>
			<td>N/A</td>
			<td>Software</td>
		</tr>
		<tr>
			<td>Atropine</td>
			<td></td>
			<td></td>
			<td>Prescription drug.</td>
		</tr>
		<tr>
			<td>Clopidogrel</td>
			<td></td>
			<td></td>
			<td>Commercial name: Plavix. Prescription drug.</td>
		</tr>
		<tr>
			<td>CM-DiI</td>
			<td>Life Technologies</td>
			<td>V-22888</td>
			<td>Molecular Probes, Eugene, OR</td>
		</tr>
		<tr>
			<td>Endothelial growth medium-2</td>
			<td>Lonza</td>
			<td>CC-3162</td>
			<td></td>
		</tr>
		<tr>
			<td>Hand Held Crimping tool</td>
			<td>Blockwise engineering</td>
			<td>M1-RMC</td>
			<td></td>
		</tr>
		<tr>
			<td>Hydrochloric acid (HCl)</td>
			<td>Sigma Aldrich</td>
			<td>MFCD00011324</td>
			<td>CAUTION: wear proptective equipment and handle under fume hood</td>
		</tr>
		<tr>
			<td>Isoflurane anesthesia</td>
			<td>Piramal Critical Care, Inc.&#160;</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Isopropyl alcohol</td>
			<td>Sigma Aldrich</td>
			<td>MFCD00011674</td>
			<td></td>
		</tr>
		<tr>
			<td>NdFeB magnet 2&#34; Dia x 1&#34; thick</td>
			<td>Amazing magnets</td>
			<td>D1000P</td>
			<td>Axially magnetized disc magnet with poles on flat faces</td>
		</tr>
		<tr>
			<td>Over-The-Wire trifold balloon</td>
			<td>N/A</td>
			<td>N/A</td>
			<td>Any commercially available OTW trifold balloon can be used</td>
		</tr>
		<tr>
			<td>Phosphate buffered saline</td>
			<td>Life Technologies</td>
			<td>10010-023</td>
			<td>Commonly known as PBS</td>
		</tr>
		<tr>
			<td>Sodium Bicarbonate (NaHCO3)</td>
			<td>Sigma Aldrich</td>
			<td>MFCD00003528</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium pentobarbital</td>
			<td>Zoetis</td>
			<td></td>
			<td>Commercial Name: Sleepaway (26%), FatalPlus, Beuthanasi.&#160; Controlled substance to be ordered only by licensed veternarian</td>
		</tr>
		<tr>
			<td>SolidWorks</td>
			<td>Dassault systems</td>
			<td>N/A</td>
			<td>Software</td>
		</tr>
		<tr>
			<td>SpinTJ-020 micro sensor</td>
			<td>MicroMagneitcs Sensible Solutions</td>
			<td>N/A</td>
			<td>Long probe STJ-020 microsensor</td>
		</tr>
		<tr>
			<td>SPION</td>
			<td>Mayo Clinic</td>
			<td>N/A</td>
			<td>Nanoparticles synthesized internally (Ref: Lee, S. J. et al. Nanoparticles of magnetic ferric oxides encapsulated with poly(D,L latide-co-glycolide) and their applications to magnetic resonance imaging contrast agent. J Magn Magn Mater 272, 2432-2433, doi:DOI 10.1016/j.jmmm.2003.12.416 (2004))</td>
		</tr>
		<tr>
			<td>Telazol</td>
			<td>Zoetis</td>
			<td></td>
			<td>Controlled substance to be ordered only by licensed veternarian</td>
		</tr>
		<tr>
			<td>Trypsin EDTA</td>
			<td>Life Technologies</td>
			<td>25200-056</td>
			<td>Gibco, Grand Island, NY</td>
		</tr>
		<tr>
			<td>Xylazine</td>
			<td>Bayer Animal Health</td>
			<td></td>
			<td>Commercial name: Rompun. Controlled sunstance to be ordered only by a licensed veternarian</td>
		</tr>
	</tbody>
</table>

ferromagnetic bare metal stent for endothelial cell capture and retention

Rapid endothelialization of cardiovascular stents is needed to reduce stent thrombosis and to avoid anti-platelet therapy which can reduce bleeding risk. The feasibility of using magnetic forces to capture and retain endothelial outgrowth cells (EOC) labeled with super paramagnetic iron oxide nanoparticles (SPION) has been shown previously. But this technique requires the development of a mechanically functional stent from a magnetic and biocompatible material followed by in-vitro and in-vivo testing to prove rapid endothelialization. We developed a weakly ferromagnetic stent from 2205 duplex stainless steel using computer aided design (CAD) and its design was further refined using finite element analysis (FEA). The final design of the stent exhibited a principal strain below the fracture limit of the material during mechanical crimping and expansion. One hundred stents were manufactured and a subset of them was used for mechanical testing, retained magnetic field measurements, in-vitro cell capture studies, and in-vivo implantation studies. Ten stents were tested for deployment to verify if they sustained crimping and expansion cycle without failure. Another 10 stents were magnetized using a strong neodymium magnet and their retained magnetic field was measured. The stents showed that the retained magnetism was sufficient to capture SPION-labeled EOC in our in-vitro studies. SPION-labeled EOC capture and retention was verified in large animal models by implanting 1 magnetized stent and 1 non-magnetized control stent in each of 4 pigs. The stented arteries were explanted after 7 days and analyzed histologically. The weakly magnetic stents developed in this study were capable of attracting and retaining SPION-labeled endothelial cells which can promote rapid healing.

Iterative stent design based on FEA (Figure 1) showed a stent which can crimp and expand with a principal strain of 20% which is less than the 30% ultimate strain. Crimping and expansion test (Figure 2) showed no signs of fracture. Pictures of the deformed stent showed good agreement with FEA calculated deformations and also microscopy pictures showed no fractures (Figure 3). As expected from the retained magnetic field measurements (Figures 4 &#38; 5), ...

Watch this Scientific Journal Video about Ferromagnetic Bare Metal Stent for Endothelial Cell Capture and Retention at JoVE.com

Ferromagnetic Bare Metal Stent for Endothelial Cell Capture and Retention

Our goals were to design, manufacture and test ferromagnetic stents for endothelial cell capture. Ten stents were tested for fracture and 10 more stents were tested for retained magnetism. Finally, 10 stents were tested in-vitro and 8 more stents were implanted in 4 pigs to show cell capture and retention.

Rapid endothelialization of cardiovascular stents is needed to reduce stent thrombosis and to avoid anti-platelet therapy which can reduce bleeding risk. ...

ferromagnetic-bare-metal-stent-for-endothelial-cell-capture

Research

JoVE Journal

Bioengineering

11.4K Views.  Mayo Clinic. Our goals were to design, manufacture and test ferromagnetic stents for endothelial cell capture. Ten stents were tested for fracture and 10 more stents were tested for retained magnetism. Finally, 10 stents were tested in-vitro and 8 more stents were implanted in 4 pigs to show cell capture and retention.