Printing Fabrication of Bulk Heterojunction Solar Cells and In Situ Morphology Characterization
Please note that all translations are automatically generated. Click here for the English version.
10.2K Views
•
07:32 min
•
January 29th, 2017
DOI :
January 29th, 2017
•Przeglądaj więcej filmów
Rozdziały w tym wideo
0:05
Title
0:58
Active Layer Printing
3:26
Synchrotron X-ray Measurement
5:21
Results: Dynamic Morphology Evolution of Obtained Smooth Bulk Heterojunction Solar Cell Thin Films
6:47
Conclusion
Powiązane Filmy
13:44
Simulation, Fabrication and Characterization of THz Metamaterial Absorbers
15.2K Views
11:08
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
18.8K Views
08:19
Patterning via Optical Saturable Transitions - Fabrication and Characterization
6.8K Views
08:45
Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing
7.7K Views
10:14
Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles
12.7K Views
10:26
Fabrication and Characterization of Superconducting Resonators
10.3K Views
08:19
Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells
12.7K Views
08:29
Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
9.0K Views
09:19
In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells
8.3K Views
10:31
Developing High Performance GaP/Si Heterojunction Solar Cells
7.4K Views
Copyright © 2025 MyJoVE Corporation. Wszelkie prawa zastrzeżone