We would like to acknowledge Sean Fitzwater and Carmen Giannina Luna Colombo for the tuberculosis growth time-lapse video segment.&nbsp; We thank Marty Roper for her thorough and excellent feedback during the editing and co-authoring the User Guide, from which the current protocol was taken mostly verbatim.&nbsp; Production of this video was funded by the NIH/ Fogarty International Center <a href="http://www.fic.nih.gov/">http://www.fic.nih.gov/</a> David A.J. Moore contributed as a Wellcome Trust Clinical Research Fellow in Tropical Medicine and Reader in Infectious Diseases at Imperial College London (Fellowship award number 078067/Z/05).&nbsp; Mark F. Brady contributed as an NIH/Fogarty International Center Research Fellow.

<ol>
<li>Prepare stock solutions <ol>
<li>Phosphate buffer stock <ol>
<li>Mix 950ml of sodium dibasic solution (9.47g of sodium phosphate dibasic dissolved in 1000ml distilled water) with 950ml of potassium phosphate monobasic solution (9.07g of potassium phosphate monobasic dissolved in 1000ml distilled water) and stir; keep back 50ml of each solution to adjust pH if necessary </li>
<li>Adjust pH to 6.8 &plusmn; 0.2: add sodium phosphate dibasic solution to raise pH; add potassium phosphate monobasic solution to lower pH </li>
<li>Autoclave at 121-124&deg;C for 15 minutes to sterilize </li>
<li>Plate a 100&mu;l aliquot of the phosphate buffer solution on nutrient agar medium in a Petri dish and incubate at 37&deg;C for 48 hours to confirm sterility </li>
<li>Store in refrigerator at 2-8&deg;C for up to one month Note: Each sputum sample requires 10ml of phosphate buffer solution </li>
</ol></li>
<li>Decontamination stock <ol>
<li>Combine equal volumes of sodium hydroxide solution (8.0g of sodium hydroxide dissolved in 200ml sterile distilled water) and sodium citrate solution (5.8g of sodium citrate distilled in 200ml sterile distilled water) </li>
<li>Mix and autoclave at 121-124&deg;C for 15 minutes </li>
<li>Store in refrigerator at 2-8&deg;C for up to one month Note: Each sputum sample requires 2ml of decontamination stock </li>
</ol></li>
<li>Culture media stock <ol>
<li>Into 900ml of sterile distilled water add 3.1ml of glycerol and 1.25g of casitone and 5.9g of 7H9 medium powder; mix with constant agitation until completely dissolved </li>
<li>Autoclave at 121-124&deg;C for 15 minutes </li>
<li>Cool and divide the sterile medium into 4.5ml aliquots in sterile 16x 100 mm glass tubes for sample preparation, and 10.8ml aliquots for preparation of antibiotic solutions and internal controls </li>
<li>Incubate at 37&deg;C for 48 hours to verify sterility (lack of turbidity) </li>
<li>Store at 2-8&deg;C with cap tightly closed for up to one month Note: Each sputum sample requires one tube containing 4.5ml of 7H9 medium </li>
</ol></li>
<li>Antibiotic stock solutions <ol>
<li>A. Isoniazid stock (8 mg/ml) <ol>
<li>Dissolve 20 mg isoniazid completely in 2.5ml sterile distilled water </li>
<li>Filter with 0.2&mu;m syringe filter for aqueous solvent </li>
<li>Store in 20&mu;l aliquots in sterile micro centrifugation tubes at -20&deg;C for up to 6 months Note: Each stored 20&mu;l aliquot is sufficient for up to 100 samples (including wastage) </li>
</ol></li>
<li>B. Rifampicin stock (8 mg/ml) </li>
</ol><ol>
<li>Dissolve 20mg rifampicin completely in 1.25ml DMSO </li>
<li>Add 1.25ml sterile distilled water and mix </li>
<li>Filter with 0.2&mu;m syringe filter for organic solvent </li>
<li>Store in 20&mu;l aliquots in sterile microcentrifuge tubes at -20&deg;C for up to 6 months Note: Each stored 20&mu;l aliquot is sufficient for up to 100 samples (including wastage) </li>
</ol></li>
</ol></li>
<li>Prepare working solutions <ol>
<li>Decontamination working solution <ol>
<li>Dissolve 0.1g of NALC crystals in every 20ml of decontamination solution required Note: Each sample needs 2ml of decontamination solution Note: Discard any NaOH-NALC decontamination solution that remains unused after 24 hours as NALC loses its mucolytic activity over time </li>
</ol></li>
<li>Culture media working solution <ol>
<li>Set out: <ol>
<li>1 tube with 7H9 medium for every sputum sample to be processed, plus 1 additional tube for every plate (for the negative control column) </li>
<li>2 tubes of 7H9 medium for the positive controls (3 if monoresistant strains are used) </li>
<li>1-2 tubes with 10.8ml 7H9 for antibiotic solution preparation </li>
</ol></li>
<li>Add 0.5ml OADC to the 4.5ml of 7H9 in each sample tube </li>
<li>Add 1.2ml OADC to tubes with 10.8ml 7H9 </li>
<li>Set aside 2 tubes with 5ml 7H9-OADC for positive controls, and tube(s) with 12ml 7H9-OADC to be used for antibiotic solution preparation (these do not require PANTA)</li>
<li>Reconstitute PANTA and add 0.1ml to each sample tube and to the negative control tubes (7H9-OADC-PANTA: total volume=5.1ml) Note: Complete medium with PANTA (7H9-OADC-PANTA) is used for sputum samples and negative controls; use 7H9-OADC without PANTA for positive controls and for antibiotic solution preparation </li>
</ol></li>
<li>Antibiotic working solutions <ol>
<li>1. See Figure 1 for steps to making the antibiotic working solution in an unused 24-well plate Note: For accurate susceptibility results, the final antibiotic concentrations are critical. The following procedure is suitable for laboratories equipped with micropipettes. If micropipettes are not available, tuberculin syringes can be used with a different series of dilutions described in the User Guide Appendix 3 at modsperu.org Note: Do not re-freeze or re-use antibiotic working or stock solutions as drug activity may be lost. Discard all unused antibiotic solutions at the end of the processing day Figure 1. Making the antibiotic working solutions (from User Guide at modsperu.org ) </li>
</ol></li>
</ol></li>
<li>Sputum sample and plate preparation<ol>
<li>Decontamination<ol>
<li>Place 2ml of sputum sample into a 15ml centrifuge tube (if less, make up to 2ml with phosphate buffer; if more, use only 2ml)</li>
<li>Add 2ml NaOH-NALC solution</li>
<li>Cap tube tightly and vortex for 20 seconds; invert tube to ensure NaOH-NALC solution contacts the entire interior surface of the tube and lid </li>
<li>Let stand for a minimum of 15 minutes &ndash; can prolong by a few minutes if the sample is particularly viscous. To avoid over treatment, should not exceed 20 minutes</li>
<li>Fill the tube to 14ml with phosphate buffer (pH 6.8) to neutralize alkali and terminate the decontamination process, and mix well by inverting the tube 4 times</li>
<li>Centrifuge at 3000 g for 15 minutes (see Appendix 2 in User Guide at modsperu.org for equation of rotations per minute necessary to reach 3000 g)</li>
<li>Carefully pour off supernatant into a liquid waste container with 10% sodium hypochlorite or other suitable disinfectant and retain the pellet</li>
</ol></li>
<li>Preparation of final sample suspension and backup<ol>
<li>Using 7H9-OADC-PANTA (from the tube containing 5.1ml), resuspend the sample pellet in a total volume of 2ml in the centrifuge tube with a Pasteur pipette; mix well</li>
<li>Remove 1ml of sample suspension and store in a microcentrifuge tube at 2-8&deg;C as a backup</li>
<li>Add the second 1ml of sample suspension to the tube with the remaining 7H9-OADC-PANTA; mix well. This is the final sample solution ready for plating</li>
</ol></li>
<li>Placing sample suspensions into 24-well plate<ol>
<li>Place 900&mu;l of the final sample suspension into each of the 4 wells of a column in the 24-well plate</li>
<li>Repeat with additional samples until all columns of the plate, except Column 3, are filled (or until all samples are plated)</li>
<li>Place 900&mu;l of 7H9-OADC medium without sample in the 4 wells of Column 3 of each sample plate (negative internal controls)</li>
</ol></li>
<li>Adding antibiotics to samples<ol>
<li>Using a multi-channel pipette, carefully fill 4 tips with 100&mu;l from the wells with 7H9-OADC and antibiotic working solutions (Column 2 in antibiotic dilution plate- see Figure 1)</li>
<li>Add the 100&mu;l aliquots to the column 1 wells with 900&mu;l sample solutions without touching plate or sample</li>
<li>Repeat until all columns have received the additional 100&mu;l of medium (drug-free wells) or antibiotic solutions (including negative control column 3)</li>
<li>Close the plate with its lid and place in a sealable polythene (Ziplock) bag and seal (bag is not opened again from this point onwards)</li>
<li>Incubate at 37&deg;C (CO2 enrichment is not necessary)</li>
</ol></li>
</ol></li>
<li>&nbsp;Quality control <ol>
<li>Negative controls are run on each plate.&nbsp; The presence of any growth in any of the wells in the negative control column indicates cross-contamination, therefore the entire plate must be discarded and the samples re-plated. </li>
<li>Positive controls are run on a separate plate at the end of the day.&nbsp; One fully drug-susceptible strain is run in a column and a strain resistant to INH and RIF is run in another column.&nbsp; If there is concern about running an MDR strain, both an INH monoresistant strain and a RIF monoresistant strain can be run in the place of the susceptible and MDR strains.&nbsp; All positive controls should have growth in the drug-free wells to demonstrate that the media support growth.&nbsp; To demonstrate that the drug concentrations are correct, the susceptible strain should not grow in the INH or RIF wells, but the MDR strain should grow also grow in the INH and RIF wells. </li>
</ol></li>
<li>Plate reading <ol>
<li>With the day of plating as &ldquo;Day 0,&rdquo; plate reading starts on Day 5, and if negative on Day 5 reading is done every day (or alternate days depending on workload) until day 14 and then every 2-3 days from day 15-21.&nbsp; Plates are examined on an inverted light microscope with the 10x objective </li>
<li>A positive culture is one in which there are two or more colony forming units (&gt;2 CFU) in BOTH drug-free wells.&nbsp; Early mycobacterial growth looks like small curved commas or spirals (days 5-9).&nbsp; Colony formation usually progresses to &ldquo;cords&rdquo; or &ldquo;tangles&rdquo;&nbsp; (see image library on modsperu.org ) </li>
<li>On the day a culture is positive in the 2 drug-free wells, the drug-containing wells should be read.&nbsp; Any growth in the presence of a drug indicates resistance to that drug. Note: If the reading of the drug-containing wells is done &gt;1 week after a positive culture is noted in the drug-free wells, this may not represent resistance as break-through growth is occasionally seen </li>
<li>Samples that are not positive by Day 21 are considered negative cultures </li>
<li>Cloudiness of the wells is a result of contamination overgrowth, whereas mycobacterial growth does not result in cloudiness </li>
<li>On completion of 21 days cultures may be discarded.&nbsp; Cultures remain in their sealed bags and are placed in autoclave bags and autoclaved at 121-124&deg;C for 45-60 minutes </li>
</ol></li>
</ol>
&nbsp;

<ol>
	<li>Arias, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+evaluation+of+the+microscopic-observation+drug-susceptibility+assay+for+detection+of+tuberculosis.">Clinical evaluation of the microscopic-observation drug-susceptibility assay for detection of tuberculosis.</a> Clin Infect Dis. 44, 674-674 (2007).</li><li>Caviedes, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid,+efficient+detection+and+drug+susceptibility+testing+of+Mycobacterium+tuberculosis+in+sputum+by+microscopic+observation+of+broth+cultures.+The+Tuberculosis+Working+Group+in+Peru.">Rapid, efficient detection and drug susceptibility testing of Mycobacterium tuberculosis in sputum by microscopic observation of broth cultures. The Tuberculosis Working Group in Peru.</a> J Clin Microbiol. 38, 1203-1203 (2000).</li><li>Caviedes, L., Moore, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Introducing+MODS:+a+low-cost,+low-tech+tool+for+high-performance+detection+of+tuberculosis+and+multidrug+resistant+tuberculosis.">Introducing MODS: a low-cost, low-tech tool for high-performance detection of tuberculosis and multidrug resistant tuberculosis.</a> Indian J Med Microbiol. 25, 87-87 (2007).</li><li>Caws, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+the+MODS+culture+technique+for+the+diagnosis+of+tuberculous+meningitis.">Evaluation of the MODS culture technique for the diagnosis of tuberculous meningitis.</a> PLoS ONE. 2, e1173-e1173 (2007).</li><li>Ejigu, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microscopic-observation+drug+susceptibility+assay+provides+rapid+and+reliable+identification+of+MDR-TB.">Microscopic-observation drug susceptibility assay provides rapid and reliable identification of MDR-TB.</a> Int J Tuberc Lung Dis. 12, 332-332 (2008).</li><li>Kim, S. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Risk+of+occupational+tuberculosis+in+National+Tuberculosis+Programme+laboratories+in+Korea.">Risk of occupational tuberculosis in National Tuberculosis Programme laboratories in Korea.</a> Int J Tuberc Lung Dis. 11, 138-138 (2007).</li><li>Mello, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+evaluation+of+the+microscopic+observation+drug+susceptibility+assay+for+detection+of+Mycobacterium+tuberculosis+resistance+to+isoniazid+or+rifampin.">Clinical evaluation of the microscopic observation drug susceptibility assay for detection of Mycobacterium tuberculosis resistance to isoniazid or rifampin.</a> J Clin Microbiol. 45, 3387-3387 (2007).</li><li>Moore, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Future+prospects+for+the+MODS+assay+in+multidrug-resistant+tuberculosis+diagnosis.">Future prospects for the MODS assay in multidrug-resistant tuberculosis diagnosis.</a> Future Microbiol. 2, 97-97 (2007).</li><li>Moore, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Infrequent+MODS+TB+culture+cross-contamination+in+a+high-burden+resource-poor+setting.">Infrequent MODS TB culture cross-contamination in a high-burden resource-poor setting.</a> Diagn Microbiol Infect Dis. 56, 35-35 (2006).</li><li>Moore, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microscopic-observation+drug-susceptibility+assay+for+the+diagnosis+of+TB.">Microscopic-observation drug-susceptibility assay for the diagnosis of TB.</a> N Engl J Med. 355, 1539-1539 (2006).</li><li>Moore, D. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microscopic+observation+drug+susceptibility+assay,+a+rapid,+reliable+diagnostic+test+for+multidrug-resistant+tuberculosis+suitable+for+use+in+resource-poor+settings.">Microscopic observation drug susceptibility assay, a rapid, reliable diagnostic test for multidrug-resistant tuberculosis suitable for use in resource-poor settings.</a> J Clin Microbiol. 42, 4432-4432 (2004).</li><li>Moore, D. A., Roper, M. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diagnosis+of+smear-negative+tuberculosis+in+people+with+HIV/AIDS.">Diagnosis of smear-negative tuberculosis in people with HIV/AIDS.</a> Lancet. 370, 1033-1033 (2007).</li><li>Oberhelman, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+recovery+of+Mycobacterium+tuberculosis+from+children+using+the+microscopic+observation+drug+susceptibility+method.">Improved recovery of Mycobacterium tuberculosis from children using the microscopic observation drug susceptibility method.</a> Pediatrics. 118, e100-e100 (2006).</li><li>Palomino, J. C., Martin, A., Portaels, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=MODS+assay+for+the+diagnosis+of+TB.">MODS assay for the diagnosis of TB.</a> N Engl J Med. 356, 188-189 (2007).</li><li>Park, W. G., Bishai, W. R., Chaisson, R. E., Dorman, S. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Performance+of+the+microscopic+observation+drug+susceptibility+assay+in+drug+susceptibility+testing+for+Mycobacterium+tuberculosis.">Performance of the microscopic observation drug susceptibility assay in drug susceptibility testing for Mycobacterium tuberculosis.</a> J Clin Microbiol. 40, 4750-4750 (2002).</li><li>Shiferaw, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+microscopic+observation+drug+susceptibility+assay+for+detection+of+multidrug-resistant+Mycobacterium+tuberculosis.">Evaluation of microscopic observation drug susceptibility assay for detection of multidrug-resistant Mycobacterium tuberculosis.</a> J Clin Microbiol. 45, 1093-1093 (2007).</li><li>Tovar, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+diagnosis+of+pleural+tuberculosis+using+the+microscopic-+observation+drug-susceptibility+technique.">Improved diagnosis of pleural tuberculosis using the microscopic- observation drug-susceptibility technique.</a> Clin Infect Dis. 46, 909-909 (2008).</li><li>Vargas, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diagnosis+of+sputum-scarce+HIV-associated+pulmonary+tuberculosis+in+Lima,+Peru.">Diagnosis of sputum-scarce HIV-associated pulmonary tuberculosis in Lima, Peru.</a> Lancet. 365, 150-150 (2005).</li></ol>

The MODS assay is targeted at resource-limited settings.&nbsp; For the first time, MODS brings the ability for rapid liquid culture detection of tuberculosis and multidrug resistant tuberculosis to resource-limited settings at just under $3 per test.&nbsp; MODS is a non-proprietary, iterative methodology, and the MODS community is always interested in improvements that other laboratories have managed to make.
A recurrent concern is the biosafety of liquid media culture of tuberculosis because...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Refrigerator/ freezer</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>to store pre-prepared broth and antibiotic stocks</td>
</tr>
<tr>
<td>Vortex</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>to aid sputum decontamination</td>
</tr>
<tr>
<td>Centrifuge</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>for sputum concentration; capable of reaching 3000 g; does not need to be refrigerated, but MUST be biosafe (buckets can be sealed)</td>
</tr>
<tr>
<td>Incubator (37 degree C)</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>for culture; need not be CO2 enriched</td>
</tr>
<tr>
<td>Inverted light microscope</td>
<td>Microscope</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>to read MODS plates</td>
</tr>
<tr>
<td>Autoclave</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>to sterilize media, PBS and used plates</td>
</tr>
<tr>
<td>Balance</td>
<td>Equipment</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>to weigh isoniazid, rifampicin and NALC</td>
</tr>
<tr>
<td>Middlebrook 7H9 broth (Difco)</td>
<td>Reagent</td>
<td>Fisher</td>
<td>DF0713-17-9</td>
<td>500gr/bottle; culture media base</td>
</tr>
<tr>
<td>Casitone (pancreatic digest casein)</td>
<td>Reagent</td>
<td>Fisher</td>
<td>DF0259&#x2010;17&#x2010;9</td>
<td>500gr/bottle; culture media base</td>
</tr>
<tr>
<td>Glycerol (glycerin) lyophilized</td>
<td>Reagent</td>
<td>Sigma</td>
<td>G&#x2010;33&#x2010;500</td>
<td>500ml/bottle; culture media base</td>
</tr>
<tr>
<td>PANTA (Antibiotic mixture lyophilized BD) </td>
<td>Reagent</td>
<td>Fisher</td>
<td>B4345114</td>
<td>6 bottles/pack; antibiotic media supplement</td>
</tr>
<tr>
<td>OADC (Middlebrook OADC enrichment BD)</td>
<td>Reagent</td>
<td>Fisher</td>
<td>B11886</td>
<td>10 x 20ml/pack; nutritional media supplement</td>
</tr>
<tr>
<td>Dimethyl sulphoxide (Hibri-Max)</td>
<td>Reagent</td>
<td>Sigma</td>
<td>D-2650</td>
<td>100ml/bottle; to prepare rifampicin stock</td>
</tr>
<tr>
<td>Antibiotic stocks: isoniazid</td>
<td>Reagent</td>
<td>Sigma</td>
<td>I-3377</td>
<td>50gr/bottle; direct susceptibility testing</td>
</tr>
<tr>
<td>Antibiotic stocks: rifampicin</td>
<td>Reagent</td>
<td>Sigma 99</td>
<td>R-3501</td>
<td>1gr/bottle; direct susceptibility testing</td>
</tr>
<tr>
<td>Sodium hydroxide (pellets)</td>
<td>Reagent</td>
<td>Sigma</td>
<td>221465</td>
<td>500gr/bottle; sputum decontamination</td>
</tr>
<tr>
<td>Sodium citrate (trisodium salt dihydrate)</td>
<td>Reagent</td>
<td>Sigma</td>
<td>S-4641</td>
<td>500gr/bottle; sputum decontamination</td>
</tr>
<tr>
<td>N-acetyl-L-cysteine</td>
<td>Reagent</td>
<td>Sigma</td>
<td>A-7250</td>
<td>50gr/bottle; sputum decontamination</td>
</tr>
<tr>
<td>Potassium Phosphate Monobasic crystal. KH2PO4</td>
<td>Reagent</td>
<td>Sigma</td>
<td>P0662</td>
<td>500gr/bottle; sputum decontamination</td>
</tr>
<tr>
<td>Sodium Phosphate Dibasic, anhydrous. Na2HPO4</td>
<td>Reagent</td>
<td>Sigma</td>
<td>S0876</td>
<td>500gr/bottle; sputum decontamination</td>
</tr>
<tr>
<td>Sodium hypochlorite</td>
<td>Reagent</td>
<td>household bleach</td>
<td>&nbsp;</td>
<td>to discard contaminated waste</td>
</tr>
<tr>
<td>15ml centrifuge tubes (polypropylene 15ml Falcon 35&#x2010;2096)</td>
<td>Consumable</td>
<td>Fisher</td>
<td>14&#x2010;959&#x2010;49B</td>
<td>500ea/case; for sputum decontamination and concentration</td>
</tr>
<tr>
<td>24 well plates (Plates Tissue 24 wells BD Falcon 35&#x2010;3047)</td>
<td>Consumable</td>
<td>Fisher</td>
<td>08-772-1</td>
<td>50 plates/case; for culture and reading</td>
</tr>
<tr>
<td>Sealable polythene bags 6 X 6 &#x201C; (ziplock)</td>
<td>Consumable</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>for biosecurity to contain 24 well plate</td>
</tr>
<tr>
<td>Glass tubes with lid (16 x 100mm and 18 x 145mm)</td>
<td>Consumable</td>
<td>VWR</td>
<td>47729-583</td>
<td>500 tubes/case; to store aliquots of prepared broth</td>
</tr>
<tr>
<td>Screw cap microcentrifuge tubes (1.5ml)</td>
<td>Consumable</td>
<td>Fisher</td>
<td>05&#x2010;669&#x2010;22</td>
<td>1000ea/case; to store aliquots of antibiotic stocks</td>
</tr>
<tr>
<td>0.22&#x03BC;m filters (aqueous solvents) Syringe filter Millex blue</td>
<td>Consumable</td>
<td>Fisher</td>
<td>SLGL 025 OS</td>
<td>50 units/case; to filter antibiotic stocks</td>
</tr>
<tr>
<td>0.22&#x03BC;m filters (organic solvents) Syringe filter Millex yellow</td>
<td>Consumable</td>
<td>Fisher</td>
<td>SLGV 033 RS</td>
<td>50 units/case; to filter antibiotic stocks</td>
</tr>
<tr>
<td>Disposable Pasteur pipettes borosilicate glass 9&#x2033;</td>
<td>Consumable</td>
<td>Fisher</td>
<td>13&#x2010;678&#x2010;20C</td>
<td>720ea/case; to mix PANTA with media mix</td>
</tr>
<tr>
<td>Aerosol barrier tips 1000&#x2010;1300&#x03BC;l</td>
<td>Consumable</td>
<td>Fisher</td>
<td>02&#x2010;707&#x2010;51</td>
<td>1000ea/pk; to dispense media into plate</td>
</tr>
<tr>
<td>USA Scientific Tips One 1&#x2010;200&#x03BC;l yellow tips</td>
<td>Consumable</td>
<td>Fisher</td>
<td>1111&#x2010;0006</td>
<td>1000 tips/bag; to dilute antibiotic stocks</td>
</tr>		</tbody>
		</table>
		</div>

the mods method for diagnosis of tuberculosis and multidrug resistant tuberculosis

Patients with active pulmonary tuberculosis (TB) infect 10-15 other persons per year, making diagnosing active TB essential to both curing the patient and preventing new infections.  Furthermore, the emergence of multidrug resistant tuberculosis (MDRTB) means that detection of drug resistance is necessary for stopping the spread of drug-resistant strains.  The microscopic-observation drug-susceptibility (MODS) assay is a low-cost, low-tech tool for high-performance detection of TB and MDRTB.  The MODS assay is based on three principles: 1) mycobacterium tuberculosis (MTB) grows faster in liquid media than on solid media 2) microscopic MTB growth can be detected earlier in liquid media than waiting for the macroscopic appearance of colonies on solid media, and that growth is characteristic of MTB, allowing it to be distinguished from atypical mycobacteria or fungal or bacterial contamination 3) the drugs isoniazid and rifampicin can be incorporated into the MODS assay to allow for simultaneous direct detection of MDRTB, obviating the need for subculture to perform an indirect drug susceptibility test. Competing current diagnostics are hampered by low sensitivity with sputum smear, long delays until diagnosis with solid media culture, prohibitively high cost with existing liquid media culture methods, and the need to do subculture for indirect drug susceptibility testing to detect MDRTB.  In contrast, the non-proprietary MODS method has a high sensitivity for TB and MDRTB, is a relatively rapid culture method, provides simultaneous drug susceptibility testing for MDRTB, and is accessible to resource-limited settings at just under $3 for testing for TB and MDRTB.

Watch this Scientific Journal Video about The MODS method for diagnosis of tuberculosis and multidrug resistant tuberculosis at JoVE.com

The MODS method for diagnosis of tuberculosis and multidrug resistant tuberculosis

The microscopic-observation drug-susceptibility (MODS) assay is a low-cost, low-tech tool for high-performance detection of tuberculosis (TB) and multidrug-resistant tuberculosis (MDRTB). This video describes the MODS liquid media culture method.

Patients with active pulmonary tuberculosis (TB) infect 10-15 other persons per year, making diagnosing active TB essential to both curing the patient and ...

the-mods-method-for-diagnosis-tuberculosis-multidrug-resistant

Research

JoVE Journal

Biology

18.9K Views.  The Warren Alpert Medical School of Brown University. The microscopic-observation drug-susceptibility (MODS) assay is a low-cost, low-tech tool for high-performance detection of tuberculosis (TB) and multidrug-resistant tuberculosis (MDRTB). This video describes the MODS liquid media culture method.