Name: measuring the spin-lattice relaxation magnetic field dependence of hyperpolarized [1-13c]pyruvate
Uploaded: 2019-09-13T12:30:00
Description: Watch this Scientific Journal Video about Measuring the Spin-Lattice Relaxation Magnetic Field Dependence of Hyperpolarized [1-13C]pyruvate at JoVE.com

The authors would like to thank the Ontario Institute for Cancer Research, Imaging Translation Program and the Natural Sciences and Engineering Research Council of Canada for funding this research. We also like to acknowledge useful discussions with Albert Chen, GE Healthcare, Toronto, Canada, Gianni Ferrante, Stelar s.r.l., Italy, and William Mander, Oxford Instruments, UK.

1. Sample Preparation
NOTE: Steps 1.1-1.8 are performed just once
<ol>
	<li>Prepare 1 mL of stock 13C-enriched pyruvic acid solution, widely used for in vivo research1,2,5,6, consisting of 15-mmol/L of triarylmethyl radical dissolved in [1-13C]pyruvic acid (see Table of Materials). Aliquots from this stock solution wi...

<ol>
	<li>Golman, K., Zandt, R. I., Lerche, M., Pehrson, R., Ardenkjaer-Larsen, J. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metabolic+imaging+by+hyperpolarized+13C+magnetic+resonance+imaging+for+in+vivo+tumor+diagnosis.">Metabolic imaging by hyperpolarized 13C magnetic resonance imaging for in vivo tumor diagnosis.</a> Cancer Research. 66 (22), 10855-10860 (2006).</li><li>Witney, T. H., Brindle, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Imaging+tumour+cell+metabolism+using+hyperpolarized+13C+magnetic+resonance+spectroscopy.">Imaging tumour cell metabolism using hyperpolarized 13C magnetic resonance spectroscopy.</a> Biochemical Society Transactions. 38 (5), 1220-1224 (2010).</li><li>Kurhanewicz, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+cancer+metabolism+by+imaging+hyperpolarized+nuclei:+prospects+for+translation+to+clinical+research.">Analysis of cancer metabolism by imaging hyperpolarized nuclei: prospects for translation to clinical research.</a> Neoplasia. 13 (2), 81-97 (2011).</li><li>Golman, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cardiac+metabolism+measured+noninvasively+by+hyperpolarized+13C+MRI.">Cardiac metabolism measured noninvasively by hyperpolarized 13C MRI.</a> Magnetic Resonance in Medicine. 59 (5), 1005-1013 (2008).</li><li>Golman, K., in 't Zandt, R., Thaning, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real-time+metabolic+imaging.">Real-time metabolic imaging.</a> Proceedings of the National Academy of Science of the United States of America. 103 (30), 11270-11275 (2006).</li><li>Day, S. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detecting+response+of+rat+C6+glioma+tumors+to+radiotherapy+using+hyperpolarized+[1-+13C]pyruvate+and+13C+magnetic+resonance+spectroscopic+imaging.">Detecting response of rat C6 glioma tumors to radiotherapy using hyperpolarized [1- 13C]pyruvate and 13C magnetic resonance spectroscopic imaging.</a> Magnetic Resonance in Medicine. 65 (2), 557-563 (2011).</li><li>Gallagher, F. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Magnetic+resonance+imaging+of+pH+in+vivo+using+hyperpolarized+13C-labelled+bicarbonate.">Magnetic resonance imaging of pH in vivo using hyperpolarized 13C-labelled bicarbonate.</a> Nature. 453 (7197), 940-943 (2008).</li><li>Wilson, D. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multi-compound+polarization+by+DNP+allows+simultaneous+assessment+of+multiple+enzymatic+activities+in+vivo.">Multi-compound polarization by DNP allows simultaneous assessment of multiple enzymatic activities in vivo.</a> Journal of Magnetic Resonance. 205 (1), 141-147 (2010).</li><li>Gallagher, F. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Production+of+hyperpolarized+[1,4-13C2]malate+from+[1,4-13C2]fumarate+is+a+marker+of+cell+necrosis+and+treatment+response+in+tumors.">Production of hyperpolarized [1,4-13C2]malate from [1,4-13C2]fumarate is a marker of cell necrosis and treatment response in tumors.</a> Proceedings of the National Academy of Science of the United States of America. 106 (47), 19801-19806 (2009).</li><li>Chen, A. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Feasibility+of+using+hyperpolarized+[1-13C]lactate+as+a+substrate+for+in+vivo+metabolic+13C+MRSI+studies.">Feasibility of using hyperpolarized [1-13C]lactate as a substrate for in vivo metabolic 13C MRSI studies.</a> Magnetic Resonance Imaging. 26 (6), 721-726 (2008).</li><li>Gallagher, F. A., Kettunen, M. I., Day, S. E., Lerche, M., Brindle, K. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=13C+MR+spectroscopy+measurements+of+glutaminase+activity+in+human+hepatocellular+carcinoma+cells+using+hyperpolarized+13C-labeled+glutamine.">13C MR spectroscopy measurements of glutaminase activity in human hepatocellular carcinoma cells using hyperpolarized 13C-labeled glutamine.</a> Magnetic Resonance in Medicine. 60 (2), 253-257 (2008).</li><li>Ardenkjaer-Larsen, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Increase+in+signal-to-noise+ratio+of+&gt;+10,000+times+in+liquid-state+NMR.">Increase in signal-to-noise ratio of &gt; 10,000 times in liquid-state NMR.</a> Proceedings of the National Academy of Sciences of the United States of America. 100 (18), 10158-10163 (2003).</li><li>Ishii, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hyperpolarized+13C+MRI+of+the+pulmonary+vasculature+and+parenchyma.">Hyperpolarized 13C MRI of the pulmonary vasculature and parenchyma.</a> Magnetic Resonance in Medicine. 57 (3), 459-463 (2007).</li><li>Lau, A. Z., Chen, A. P., Cunningham, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrated+Bloch-Siegert+B(1)+mapping+and+multislice+imaging+of+hyperpolarized+(1)(3)C+pyruvate+and+bicarbonate+in+the+heart.">Integrated Bloch-Siegert B(1) mapping and multislice imaging of hyperpolarized (1)(3)C pyruvate and bicarbonate in the heart.</a> Magnetic Resonance in Medicine. 67 (1), 62-71 (2012).</li><li>Lau, A. Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+multislice+imaging+of+hyperpolarized+13C+pyruvate+and+bicarbonate+in+the+heart.">Rapid multislice imaging of hyperpolarized 13C pyruvate and bicarbonate in the heart.</a> Magnetic Resonance in Medicine. 64 (5), 1323-1331 (2010).</li><li>Golman, K., Ardenkjaer-Larsen, J. H., Petersson, J. S., Mansson, S., Leunbach, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Molecular+imaging+with+endogenous+substances.">Molecular imaging with endogenous substances.</a> Proceedings of the National Academy of Sciences of the United States of America. 100 (18), 10435-10439 (2003).</li><li>Johansson, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cerebral+perfusion+assessment+by+bolus+tracking+using+hyperpolarized+13C.">Cerebral perfusion assessment by bolus tracking using hyperpolarized 13C.</a> Magnetic Resonance in Medicine. 51 (3), 464-472 (2004).</li><li>Johansson, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perfusion+assessment+with+bolus+differentiation:+a+technique+applicable+to+hyperpolarized+tracers.">Perfusion assessment with bolus differentiation: a technique applicable to hyperpolarized tracers.</a> Magnetic Resonance in Medicine. 52 (5), 1043-1051 (2004).</li><li>Albers, M. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hyperpolarized+13C+lactate,+pyruvate,+and+alanine:+noninvasive+biomarkers+for+prostate+cancer+detection+and+grading.">Hyperpolarized 13C lactate, pyruvate, and alanine: noninvasive biomarkers for prostate cancer detection and grading.</a> Cancer Research. 68 (20), 8607-8615 (2008).</li><li>Chen, A. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hyperpolarized+C-13+spectroscopic+imaging+of+the+TRAMP+mouse+at+3T-initial+experience.">Hyperpolarized C-13 spectroscopic imaging of the TRAMP mouse at 3T-initial experience.</a> Magnetic Resonance in Medicine. 58 (6), 1099-1106 (2007).</li><li>Lupo, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+hyperpolarized+dynamic+13C+lactate+imaging+in+a+transgenic+mouse+model+of+prostate+cancer.">Analysis of hyperpolarized dynamic 13C lactate imaging in a transgenic mouse model of prostate cancer.</a> Magnetic Resonance Imaging. 28 (2), 153-162 (2010).</li><li>von Morze, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Imaging+of+blood+flow+using+hyperpolarized+[(13)C]urea+in+preclinical+cancer+models.">Imaging of blood flow using hyperpolarized [(13)C]urea in preclinical cancer models.</a> Journal of Magnetic Resonance Imaging. 33 (3), 692-697 (2011).</li><li>Brindle, K. M., Bohndiek, S. E., Gallagher, F. A., Kettunen, M. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tumor+imaging+using+hyperpolarized+13C+magnetic+resonance+spectroscopy.">Tumor imaging using hyperpolarized 13C magnetic resonance spectroscopy.</a> Magnetic Resonance in Medicine. 66 (2), 505-519 (2011).</li><li>Park, I., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+early+response+to+temozolomide+treatment+in+brain+tumors+using+hyperpolarized+13C+MR+metabolic+imaging.">Detection of early response to temozolomide treatment in brain tumors using hyperpolarized 13C MR metabolic imaging.</a> Journal of Magnetic Resonance Imaging. 33 (6), 1284-1290 (2011).</li><li>Bohndiek, S. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+of+tumor+response+to+a+vascular+disrupting+agent+by+hyperpolarized+13C+magnetic+resonance+spectroscopy.">Detection of tumor response to a vascular disrupting agent by hyperpolarized 13C magnetic resonance spectroscopy.</a> Molecular Cancer Therapeutics. 9 (12), 3278-3288 (2010).</li><li>Witney, T. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detecting+treatment+response+in+a+model+of+human+breast+adenocarcinoma+using+hyperpolarised+[1-13C]pyruvate+and+[1,4-13C2]fumarate.">Detecting treatment response in a model of human breast adenocarcinoma using hyperpolarised [1-13C]pyruvate and [1,4-13C2]fumarate.</a> British Journal of Cancer. 103 (9), 1400-1406 (2010).</li><li>Levitt, M. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Spin dynamics: basics of nuclear magnetic resonance. , (2001).</li><li>Mieville, P., Jannin, S., Bodenhausen, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Relaxometry+of+insensitive+nuclei:+optimizing+dissolution+dynamic+nuclear+polarization.">Relaxometry of insensitive nuclei: optimizing dissolution dynamic nuclear polarization.</a> Journal of Magnetic Resonance. 210 (1), 137-140 (2011).</li><li>Redfield, A. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Shuttling+device+for+high-resolution+measurements+of+relaxation+and+related+phenomena+in+solution+at+low+field,+using+a+shared+commercial+500+MHz+NMR+instrument.">Shuttling device for high-resolution measurements of relaxation and related phenomena in solution at low field, using a shared commercial 500 MHz NMR instrument.</a> Magnetic Resonance in Chemistry. 41 (10), 753-768 (2003).</li><li>Grosse, S., Gubaydullin, F., Scheelken, H., Vieth, H. -. M., Yurkovskaya, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Field+cycling+by+fast+NMR+probe+transfer:+Design+and+application+in+field-dependent+CIDNP+experiments.">Field cycling by fast NMR probe transfer: Design and application in field-dependent CIDNP experiments.</a> Applied Magnetic Resonance. 17 (2), 211-225 (1999).</li><li>Kimmich, R., Anoardo, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Field-cycling+NMR+relaxometry.">Field-cycling NMR relaxometry.</a> Progress in Nuclear Magnetic Resonance Spectroscopy. 44 (3-4), 257-320 (2004).</li><li>Gu&#240;j&#243;nsd&#243;ttir, M., Belton, P., Webb, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Magnetic Resonance in Food Science: Challenges in a Changing World. , 65-72 (2009).</li><li>Anoardo, E., Galli, G., Ferrante, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fast-field-cycling+NMR:+Applications+and+instrumentation.">Fast-field-cycling NMR: Applications and instrumentation.</a> Applied Magnetic Resonance. 20 (3), 365-404 (2001).</li><li>Chattergoon, N., Martinez-Santiesteban, F., Handler, W. B., Ardenkjaer-Larsen, J. H., Scholl, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Field+dependence+of+T1+for+hyperpolarized+[1-13C]pyruvate.">Field dependence of T1 for hyperpolarized [1-13C]pyruvate.</a> Contrast Media &amp; Molecular Imaging. 8 (1), 57-62 (2013).</li><li>Mart&#237;nez-Santiesteban, F. M., Dang, T. P., Lim, H., Chen, A. P., Scholl, T. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=T1+nuclear+magnetic+relaxation+dispersion+of+hyperpolarized+sodium+and+cesium+hydrogencarbonate-13C.">T1 nuclear magnetic relaxation dispersion of hyperpolarized sodium and cesium hydrogencarbonate-13C.</a> NMR in Biomedicine. 30 (9), 3749 (2017).</li></ol>

The use of DNP to enhance signal acquisition is a technical solution to insufficient magnetic resonance signal available from 13C nuclei at limited concentrations, as those used in animal injections, but presents other experimental challenges. Each relaxation measurement shown in Figure 7 represents a measurement of a uniquely prepared sample because it cannot be repolarized after dissolution for remeasurement. This inevitably leads to experimental variability due to minor differe...

Magnetic resonance spectroscopic imaging (MRSI) can produce spatial maps of metabolites detected by spectroscopic imaging, but its practical use is often limited by its relatively low sensitivity. This low sensitivity of in vivo magnetic resonance imaging and spectroscopy methods stems from the small degree of nuclear magnetization achievable at body temperatures and reasonable magnetic field strengths. However, this limitation can be overcome by the use of dynamic nuclear polarization (DNP) to greatly enhance the in vitro magnetization of liquid substrates, which are subsequently injected to probe in vivo metabolism using MRSI1,2,3,4. DNP is capable of enhancing the magnetization of most nuclei with non-zero nuclear spin and has been used to increase in vivo MRSI sensitivity of 13C-enriched compounds such as pyruvate5,6, bicarbonate7,8, fumarate9, lactate10, glutamine11, and others by more than four orders of magnitude12. Its applications include imaging of vascular disease13,14,15, organ perfusion13,16,17,18, cancer detection1,19,20,21,22, tumor staging23,24, and quantification of therapeutic response2,6,23,24,25,26.
Slow spin-lattice relaxation is essential for in vivo detection with MRSI. Spin-lattice relaxation times (T1s) on the order of tens of seconds are possible for nuclei with low gyromagnetic ratios within small molecules in solution. Several physical factors influence the transfer of energy between a nuclear spin transition and its environment (lattice) leading to relaxation, including the magnetic field strength, temperature, and molecular conformation27. Dipolar relaxation is reduced in molecules for carbon positions with no protons directly attached, and deuteration of dissolution media can further reduce intermolecular dipolar relaxation. Unfortunately, deuterated solvents have limited abilities to extend in vivo relaxation. Increased relaxation of carbonyls or carboxylic acids (such as pyruvate) can occur at high magnetic field strengths due to chemical shift anisotropy. The presence of paramagnetic impurities from the fluid path during dissolution after polarization can cause rapid relaxation and need to be avoided or eliminated using chelators.
Very little data exist for the relaxation of 13C-containing compounds at low fields, where spin-lattice relaxation could be significantly faster. However, it is important to measure T1 at low fields to understand relaxation during preparation of the agent used for in vivo imaging, since the hyperpolarized contrast agents are usually dispensed from the DNP apparatus near or at the earth&#8217;s field. Additional physical factors such as 13C-enriched substrate concentration, solution pH, buffers and temperature also influence relaxation, and consequently have an effect on the formulation of the agent. All these factors are essential in the determination of key parameters in optimizing the DNP dissolution process, and the calculation of the magnitude of signal loss that occurs in transportation of the sample from the DNP apparatus to the imaging magnet.
Nuclear magnetic resonance dispersion (NMRD) measurements, i.e., T1 measurements, as a function of magnetic field are typically acquired using an NMR spectrometer. To acquire these measurements, a shuttling method could be used where the sample is first shuttled out of the spectrometer to relax at some field determined by its position in the fringe field of the magnet28,29,30 and then rapidly transferred back into the NMR magnet to measure its remaining magnetization. By repeating this process at the same point in the magnetic field but with increasing periods of relaxation, a relaxation curve can be obtained, which can then be analyzed to estimate T1.
We use an alternative technique known as fast field-cycling relaxometry31,32,33 to acquire our NMRD data. We have modified a commercial field-cycling relaxometer (see Table of Materials), for T1 measurements of solutions containing hyperpolarized 13C nuclei. Compared with the shuttle method, field-cycling enables this relaxometer to systematically acquire NMRD data over a smaller range of magnetic fields (0.25 mT to 1 T). This is accomplished by rapidly changing the magnetic field itself, not the sample location in the magnetic field. Therefore, a sample can be magnetized at a high field strength, &#34;relaxed&#34;&#160;at a lower field strength, and then measured by acquisition of a free-induction-decay at a fixed field (and Larmor frequency) to maximize signal. This means that the sample temperature can be controlled during the measurement, and the NMR probe does not need to be tuned at each relaxation field promoting automatic acquisition over the entire magnetic field range.
Focusing our efforts to the effects of dispensing and transporting the hyperpolarized solutions at low magnetic fields, this work presents a detailed methodology to measure the spin-lattice relaxation time of hyperpolarized 13C-pyruvate using fast field-cycling relaxometry for magnetic fields in the range of 0.237 mT to 0.705 T. The main results of using this methodology have been previously presented for [1-13C]pyruvate34 and 13C-enriched sodium and cesium bicarbonate35 where other factors such as radical concentration and dissolution pH have also been studied.

<table border="0" cellpadding="0" cellspacing="0" style="width:825px;" width="824">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="24">
			<td height="24" style="height:24px;width:263px;">[1-13C]Pyruvic Acid</td>
			<td style="width:244px;">Sigma-Aldrich, St. Louis, MO, USA</td>
			<td style="width:79px;">677175</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">10mm NMR Tube</td>
			<td style="width:244px;">Norell, Inc., Morganton NC, USA</td>
			<td style="width:79px;">1001-8</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">De-ionized water</td>
			<td style="width:244px;"></td>
			<td style="width:79px;"></td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:263px;">Ethylenediaminetetraacetic acid disodium salt dihydrate (EDTA)</td>
			<td style="width:244px;">Sigma-Aldrich, St. Louis, MO, USA</td>
			<td style="width:79px;">E5134</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="294">
			<td height="294" style="height:294px;width:263px;">HyperSense Dynamic Nuclear Polarizer</td>
			<td style="width:244px;">Oxford Instruments, Abingdon, UK</td>
			<td style="width:79px;"></td>
			<td style="width:240px;">Includes the following: &#34;DNP-NMR Polarizer&#34; software used to control and monitor the whole DNP polarizer; &#34;RINMR&#34; used to monitor the solid state polarization levels; &#34;HyperTerminal&#34; used to communicate the DNP software with the RINMR software that monitors the solid state polarization level. Also includes the MQC bench top spectrometer to monitor the liquid state polarization in conjunction with it own RINMR software</td>
		</tr>
		<tr height="84">
			<td height="84" style="height:84px;width:263px;">MATLAB R2017b</td>
			<td>MathWorks, Natick, MA</td>
			<td style="width:79px;"></td>
			<td style="width:240px;">Include scripts for non-linear fitting of magnetization decay over time and T1 NMRD analysis of hyperpolarized pyruvic acid.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">OX063 Triarylmethyl radical</td>
			<td style="width:244px;">Oxford Instruments, Abingdon, UK</td>
			<td style="width:79px;"></td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:263px;">pH meter - SympHony</td>
			<td style="width:244px;">VWR International, Mississauga, ON., Canada</td>
			<td style="width:79px;">SB70P</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">ProHance</td>
			<td style="width:244px;">Bracco Diagnostics Inc.</td>
			<td style="width:79px;"></td>
			<td style="width:240px;">Gadoteridol, Gd-HP-DO3A</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:263px;">Pure Ethanol (100% pure)</td>
			<td style="width:244px;">Commercial Alcohols, Toronto, ON, Canada</td>
			<td style="width:79px;">P016EAAN</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">Shim Coil</td>
			<td style="width:244px;"></td>
			<td style="width:79px;"></td>
			<td style="width:240px;">Developed in-house</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">Sodium Chloride</td>
			<td style="width:244px;">Sigma-Aldrich, St. Louis, MO, USA</td>
			<td style="width:79px;">S7653</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">Sodium Hydroxide</td>
			<td style="width:244px;">Sigma-Aldrich, St. Louis, MO, USA</td>
			<td style="width:79px;">S8045&#160;</td>
			<td style="width:240px;"></td>
		</tr>
		<tr height="210">
			<td height="210" style="height:210px;width:263px;">SpinMaster FFC2000 1T C/DC</td>
			<td style="width:244px;">Stelar s.r.l., Mede (PV) Italy</td>
			<td style="width:79px;"></td>
			<td style="width:240px;">Includes the software &#34;AcqNMR&#34; that is used to set experimental parameters, monitor the tuning and matching of the RF coil, loading different pulse sequences, calibrate flip angle, data acquisition and curve fitting, among other functions. Also includes a depth gauge, some weights and a depth stopper.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:263px;">Trizma Pre-Set Crystals (pH 7.6)</td>
			<td style="width:244px;">Sigma-Aldrich, St. Louis, MO, USA</td>
			<td style="width:79px;">T7943</td>
			<td style="width:240px;"></td>
		</tr>
	</tbody>
</table>

measuring the spin-lattice relaxation magnetic field dependence of hyperpolarized [1-13c]pyruvate

The fundamental limit to in vivo imaging applications of hyperpolarized 13C-enriched compounds is their finite spin-lattice relaxation times. Various factors affect the relaxation rates, such as buffer composition, solution pH, temperature, and magnetic field. In this last regard, the spin-lattice relaxation time can be measured at clinical field strengths, but at lower fields, where these compounds are dispensed from the polarizer and transported to the MRI, the relaxation is even faster and difficult to measure. To have a better understanding of the amount of magnetization lost during transport, we used fast field-cycling relaxometry, with magnetic resonance detection of 13C nuclei at ~0.75 T, to measure the nuclear magnetic resonance dispersion of the spin-lattice relaxation time of hyperpolarized [1-13C]pyruvate. Dissolution dynamic nuclear polarization was used to produce hyperpolarized samples of pyruvate at a concentration of 80 mmol/L and physiological pH (~7.8). These solutions were rapidly transferred to a fast field-cycling relaxometer so that relaxation of the sample magnetization could be measured as a function of time using a calibrated small flip angle (3&#176;-5&#176;). To map the T1 dispersion of the C-1 of pyruvate, we recorded data for different relaxation fields ranging between 0.237 mT and 0.705 T. With this information, we determined an empirical equation to estimate the spin-lattice relaxation of the hyperpolarized substrate within the mentioned range of magnetic fields. These results can be used to predict the amount of magnetization lost during transport and to improve experimental designs to minimize signal loss.

Figure 2 presents an example of a high-resolution full-range microwave sweep for pyruvic acid. For the presented case, that optimal microwave frequency corresponds to 94.128 GHz, highlighted in the figure insert. Our DNP system can normally work in the range of 93.750 GHz to 94.241 GHz with step size of 1 MHz, polarization time of up to 600 s, and power of up to 100 mW. A full range of frequencies is investigated only for novel substrates. However, based on previous experience with 13</...

Watch this Scientific Journal Video about Measuring the Spin-Lattice Relaxation Magnetic Field Dependence of Hyperpolarized [1-13C]pyruvate at JoVE.com

Measuring the Spin-Lattice Relaxation Magnetic Field Dependence of Hyperpolarized [1-13C]pyruvate

We present a protocol to measure the magnetic field dependence of the spin-lattice relaxation time of 13C-enriched compounds, hyperpolarized by means of dynamic nuclear polarization, using fast field-cycled relaxometry. Specifically, we have demonstrated this with [1-13C]pyruvate, but the protocol could be extended to other hyperpolarized substrates.

Measuring the Spin-Lattice Relaxation Magnetic Field Dependence of Hyperpolarized [1-13C]pyruvate

The fundamental limit to in vivo imaging applications of hyperpolarized 13C-enriched compounds is their finite spin-lattice relaxation times. Various ...

We want to estimate the loss of polarization of a hyperpolarized solution during transport from the hyperpolarizing equipment to the MRI scanner as it traverses through different magnetic fields. Our technique estimates the spin-lattice relaxation time of hyperpolarized solutions at low magnetic fields with high accuracy. This method is not limited to dynamic nuclear polarization and can be used to estimate the spin-lattice relaxation time of other methods of polarization, including parahydrogen-induced polarization.When performing this technique, make sure that the hyperpolarized sample doesn't cross or stay at the zero-field region for any period of time, otherwise you may completely lose the polarization. Prepare one milliliter of stock carbon-13 enriched pyruvic acid solution, widely used for in vivo research, consisting of 15 millimoles per liter of triarylmethyl radical dissolved in 1-13C pyruvic acid. On the dynamic nuclear polarizer software interface, click on the Cooldown button to lower the temperature of the variable temperature insert to 1.4 kelvin.Once the DNP has reached the desired temperature, load 10 microliters of the stock solution in a sample cup. Open the turret doors, and insert the cup into the VTI using an insertion wand specifically designed for this task. Quickly extract the wand, and make sure the cup is released.Then, close the turret doors, and allow the temperature of the VTI to return to 1.4 kelvin. Meanwhile, prepare the DNP to run a microwave sweep in order to find the optimal radio frequency for the hyperpolarization of the stock solution. At the end of the microwave sweep, recover the sample.Then, set the system in idle, and record the optimal frequency where the maximum polarization is achieved. This optimal frequency is defined as the polarization frequency that provides the maximum polarization. This frequency will be used for hyperpolarizing all the aliquots obtained from that specific stock solution of pyruvic acid.Prepare 250 milliliters of stock dissolution medium as described in the text protocol, and add EDTA at a concentration of 100 milligrams per liter to sequester any metal ion contamination. Also, prepare 500 milliliters of stock cleaning solution consisting of 100 milligrams per liter EDTA dissolved in deionized water. Approximately 10 milliliters of this cleaning solution is used after each polarization to clean the dissolution path of the DNP.Cool the DNP apparatus to 1.4 kelvin in preparation of hyperpolarizing a 1-13C pyruvic acid sample by selecting the Cooldown button in the DNP main window. Weigh out 30 milligrams of the prepared pyruvic acid stock solution in a sample cup. When the desired VTI temperature is achieved, click on Insert Sample, select Normal Sample, and then click on Next.Following the safety precautions displayed on the screen, insert the cup in the cold DNP apparatus using a long wand specifically designed for this task. Once the cup is inserted, remove the wand and close the DNP doors. On the DNP software interface, click Next and then Finish.Wait until the temperature has returned to 1.4 kelvin, and then click on the Polarize Sample button. In the new popup window, set the frequency value to that obtained from the microwave sweep. In the same window, set the power to 50 milliwatts and the sampling time to 300 seconds.Click on Next, check the Enable Build-up Monitoring box, and then click on Finish. Polarize until the build-up of the solid-state magnetization reaches at least 95%of maximum. When the desired polarization is achieved, click on Run Dissolution.Under Method, select Pyruvic Acid test, and then click on Next. Following the instructions on the screen, open the DNP turret doors. Load the heating and pressurizing chamber at the top of the apparatus with approximately 4.55 milliliters of the dissolution medium.This produces a concentration of 80 millimoles per liter of pyruvate upon dissolution at a pH of 7.75 and a temperature of 37 degrees Celsius. Position the recovering wand in the right position, and close the turret doors. On the DNP software interface, click on Next and then on Finish.At that point, the dissolution media will be superheated until the pressure reaches 10 bar. Once the 10-bar pressure is attained, the frozen and hyperpolarized pyruvate is automatically lifted from the liquid helium bath, quickly mixed, and thawed with the superheated dissolution media. The mixture is then ejected through a capillary tubing into a pear-shaped flask.While the hyperpolarized pyruvate and dissolution media mixture is ejected, constantly swirl the flask to ensure a homogeneous mixture. When all of the mixture has been ejected, quickly draw 1.1 milliliters of the liquid into a syringe. Transfer the mixture to a pre-warmed, 10-milliliter-diameter NMR tube, and rapidly transport to the field-cycling relaxometer.Immediately clean the DNP fluid path using clean dissolution medium, followed by ethanol. Then, remove the cup, and blow helium gas through the fluid path to remove any remaining cleaning fluids and purge the path of oxygen. Clean all glassware.After each measurement, record the pH of the samples from the benchtop spectrometer. Also, record the pH of the samples on the field-cycling relaxometer. Prior to dissolution, the relaxometer flip angle must be calculated, and the relaxometer must be set up and ready for measurement of the hyperpolarized solution.To perform T-one measurements, make sure the external shim coil is installed and energized. In the instrument software, select the Main Par tab. Then, click on the cell next to the Experiment label, and scroll down in the popup window to select the pulse sequence HPUB/S.Now, set the acquisition parameters. Set radio frequency attenuation to 25 decibels, maximum T1 to values between three and five seconds, switching time to 0.2 seconds, recycle delay to zero seconds, and relaxation field to the desired relaxation field in megahertz. Then, select the Acquisition Parameters tab, followed by the Basic subtab.Click on the cell next to the Nucleus label, and scroll down in the popup window to select carbon-13. Then, set system frequency to eight megahertz, sweep width to one megahertz, block size to 652, and filter bandwidth to 50, 000 hertz. Next, select the Configuration subtab.Set the 90-degree pulse width time to the previously determined value, the receiver inhibit time to 25 microseconds, and the acquisition delay time to 25 microseconds. Select the Pulse subtab, and set the main RF pulse flip angle to five degrees. Then, select the Number of Dimensions subtab, and set the number of blocks to 100.Wait and get ready to receive the hyperpolarized solution to initiate the data acquisition. Immediately before inserting the sample into the relaxometer, manually start the pulse sequence from the console to avoid inserting the sample into a null magnetic field. For this reason, it is important to ignore the first free induction decay, or FID, during the data analysis.It is important to start the data acquisition before introducing the sample into the relaxometer to avoid null magnetic fields that will cause a loss in polarization. Once the acquisition is done, save the data by clicking the Save button. Using the analysis software, integrate the magnitude of each FID signal to produce a data series comprised of sample magnetization as a function of time.An example of a high-resolution, full-range microwave sweep for pyruvic acid is shown. For the presented case, that optimal microwave frequency corresponds to 94.128 gigahertz. Shown here is a typical series of decaying FIDs as the hyperpolarized magnetization is sampled.The relaxation curve for hyperpolarized 1-13C pyruvate was obtained from the data of the previous figure. Each blue point on the curve represents the area under an FID. The T1 value of 53.9 plus or minus 0.6 seconds was obtained by a non-linear least-squares fit of the signal equation to the decay curve data, which included the effects of the flip angle used for excitation.The T1 results for all 26 measurements over a range of 0.237 millitesla to 0.705 tesla at 37 degrees Celsius are shown. Each T1 measurement at a given relaxation field is a separate hyperpolarized dissolution from the DNP apparatus. The solid line represents the formula, and the dashed lines represent the 95%confidence bands.Analysis of the results showed that the relaxation time for the C-1 nucleus is 46.9 seconds at Earth's magnetic field, compared with 65 seconds at three tesla, which represents a decrease of 28%It is important to install and energize the external shim coil and to start acquisition right before inserting the sample to avoid null magnetic fields and the potential loss of polarization. Following this method, the sample procedure could be used with deuterated dissolution media to extend the spin-lattice relaxation times of the hyperpolarized solution.

Research

JoVE Journal

Bioengineering

Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth

Traditional mechanical testing often results in the destruction of the sample, and in the case of long term tissue engineered construct studies, the use ...

Measuring the Mechanical Properties of Living Cells Using Atomic Force Microscopy

Mechanical  properties of cells and extracellular matrix (ECM) play important roles in many  biological processes including stem cell differentiation, ...

Microfluidic Platform for Measuring Neutrophil Chemotaxis from Unprocessed Whole Blood

Neutrophils play an essential role in protection against infections and their numbers in the blood are frequently measured in the clinic. Higher ...

Magnetic Tweezers for the Measurement of Twist and Torque

Single-molecule techniques make it possible to investigate the behavior of individual biological molecules in solution in real time. These techniques ...

Alternating Magnetic Field-Responsive Hybrid Gelatin Microgels for Controlled Drug Release

Magnetically-responsive nano/micro-engineered biomaterials that enable a tightly controlled, on-demand drug delivery have been developed as new types of ...

Metabolic Support of Excised, Living Brain Tissues During Magnetic Resonance Microscopy Acquisition

This protocol describes the procedures necessary to support normal metabolic functions of acute brain slice preparations during the collection of magnetic ...

Measuring Global Cellular Matrix Metalloproteinase and Metabolic Activity in 3D Hydrogels

Three-dimensional (3D) cell culture systems often more closely recapitulate in vivo cellular responses and functions than traditional two-dimensional (2D) ...

Biofunctionalization of Magnetic Nanomaterials

Magnetic nanomaterials have received great attention in different biomedical applications. Biofunctionalizing these nanomaterials with specific targeting ...

Fabrication of Magnetic Platforms for Micron-Scale Organization of Interconnected Neurons

The ability to direct neurons into organized neural networks has great implications for regenerative medicine, tissue engineering, and bio-interfacing. ...

Electric and Magnetic Field Devices for Stimulation of Biological Tissues

Electric fields (EFs) and magnetic fields (MFs) have been widely used by tissue engineering to improve cell dynamics such as proliferation, migration, ...