This study was supported by the American Association of Orthodontists Foundation (AAOF) Orthodontic Faculty Development Fellowship Award (for C.L.), American Association of Orthodontists (AAO) Full-Time Faculty Fellowship Award (for C.L.), the University of Pennsylvania School of Dental Medicine Joseph and Josephine Rabinowitz Award for Excellence in Research (for C.L.), the J. Henry O&#39;Hern Jr. Pilot Grant from the Department of Orthodontics, University of Pennsylvania School of Dental Medicine (for C.L.), and the International Orthodontic Foundation Young Research Grant (for C.L.).

This study utilized a pre-existing, de-identified, pre-treatment CBCT image of a patient who had SARPE as part of the treatment plans. The study was conducted in accordance with the Declaration of Helsinki and approved by the Institutional Review Board (protocol #853608).
1. Sample acquisition and tooth segmentation
<ol>
	<li>Acquire a human CBCT image of the head in a natural head position that includes the patient&#39;s maxillary complex, including the maxillary basal bone, maxillary alveolar bone, and maxillary dentition.</li>
	<li>Import the CBCT Digital Imaging and Communications in Medicine (DICOM) files into Mimics software.
	<ol>
		<li>Create New Project (Ctrl + N), select all the DICOM images, and click Next and Convert.</li>
		<li>Define the direction of the model (A: anterior, P: posterior, T: top, B: bottom, L: left, R: right) and click OK.</li>
	</ol>
	</li>
	<li>Segment the file into maxillary complex, maxillary first premolars, and maxillary first molars.
	<ol>
		<li>Click Thresholding, select an appropriate threshold to segment bones, and click Apply.</li>
		<li>Create new masks and click Edit Masks, using Draw and Erase to segment the patient&#39;s maxillary complex, maxillary first premolars, and maxillary first molars.</li>
	</ol>
	</li>
	<li>Export the targets as stereolithography (STL) files.
	<ol>
		<li>Right-click on masks and select Calculate 3D to generate 3D objects.</li>
		<li>Right-click on 3D objects, select STL+, choose the demanded objects, and press Add and Finish to create STL files.</li>
	</ol>
	</li>
</ol>
2. Surface smoothing and creation of cancellous bone and periodontal ligament space
<ol>
	<li>Import the STL files into Geomagic software.
	<ol>
		<li>Click File &#62; Open, select the STL files, then press Open.</li>
		<li>Choose Millimeters for the data in Units pop-up window and click OK.</li>
	</ol>
	</li>
	<li>Smooth the surface of the maxillary complex, maxillary first premolars, and maxillary first molars.
	<ol>
		<li>Click Polygons &#62; Remove Spikes, click and drag the smoothness level near Low, click Apply, and OK.</li>
		<li>Click Polygons &#62; Relax Polygons, click and drag the smoothness level near Min, click Apply, and OK.</li>
		<li>Click Polygons &#62; Repair intersections, choose Relax/Clean in the Mode window, click Apply, and OK.</li>
	</ol>
	</li>
	<li>Modify the surface of the model into a continuous and closed region.
	<ol>
		<li>Click and drag the sharp surface, and press delete to create a hole.</li>
		<li>Click Polygons &#62; Fill Holes, use Fill, Fill Partial, Create Bridges in the Fill Method window to fill up the holes, click Apply, and OK.</li>
	</ol>
	</li>
	<li>Convert the 2D surface to a 3D solid model and export it as a computer-aided design (CAD) file.
	<ol>
		<li>Click Edit &#62; Phase &#62; Shape Phase, select Edit contours to sketch the contours of the surface, then click OK.</li>
		<li>Click Draw Patch Layout and draw quadrilateral meshes to cover all the surfaces, then click OK.</li>
		<li>Click Construct Grids, define a proper Resolution, and click OK to generate a finer mesh.</li>
		<li>Click Fit Surfaces, click Apply, and OK to construct a 3D solid model.</li>
		<li>Click File &#62; Save as to export the 3D model and save it in an IGES file (named Maxilla).</li>
	</ol>
	</li>
	<li>Create the cancellous bone by reducing the volume of the maxillary complex by 1 mm from the buccal alveolar surface. Create periodontal ligament space by expanding the contour of the roots by 0.2 mm.
	<ol>
		<li>Click Polygon Phase, choose Delete in the Contour Lines window, select Preserve in the Patch Layout window, then press OK to convert the 3D solid model into a 2D surface.</li>
		<li>Click Polygons &#62; Offset, enter -1 mm and 0.2 mm in the Distance panel for cancellous bone and periodontal ligament, then click Apply and OK.</li>
		<li>Click Edit &#62; Phase &#62; Shape Phase, select Restore Patch Layout and press OK.</li>
		<li>Click Construct Grids, define a proper Resolution, and click OK to generate a finer mesh.</li>
		<li>Click Fit Surfaces, click Apply, and OK to construct a 3D solid model.</li>
		<li>Click File &#62; Save as to export the 3D model and save it in IGES files (named CB and PL).</li>
	</ol>
	</li>
</ol>
3. Construct an anatomical symmetric maxilla model
<ol>
	<li>Import the CAD files into SolidWorks.
	<ol>
		<li>Click File &#62; Open, select the Maxilla file, and press Open to import the CAD file.</li>
		<li>Click File &#62; Save to save the file into the Part format.</li>
	</ol>
	</li>
	<li>Construct the cancellous bone below the palatal plane (PP).
	<ol>
		<li>Click Insert &#62; Part, select the CB file, and press Open to import the CAD file.</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the palatal plane, and click OK to create a cutting plane.</li>
		<li>Click Insert &#62; Features &#62; Split, choose the palatal plane in Trim Tools, and click Cut Part to create a cutting preview.</li>
		<li>Tick the checkboxes in the Resulting Bodies, and click OK to separate the cancellous bone.</li>
		<li>Click the cancellous bone above the palatal plane, right click and press Delete in the Body section.</li>
	</ol>
	</li>
	<li>Construct the periodontal ligament of maxillary first premolars and maxillary first molars.
	<ol>
		<li>Click Insert &#62; Part, select the PL file, and press Open to import the CAD file.</li>
		<li>Click Insert &#62; Features &#62; Intersect, and choose Maxilla and PL in the Selections window.</li>
		<li>Select Create both in the Selections window, choose the periodontal ligament part in the Region List, then click OK to generate the ligament.</li>
	</ol>
	</li>
	<li>Perform a midpalatal cutting plane from the anterior nasal spine (ANS) to posterior nasal spine (PNS) and retain the right half of the maxillary complex.
	<ol>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the midpalatal plane, and click OK to create a cutting plane.</li>
		<li>Click Insert &#62; Features &#62; Split, choose the palatal plane in Trim Tools, and click Cut Part to create a cutting preview.</li>
		<li>Tick the checkboxes in the Resulting Bodies, and click OK to separate the maxillary complex.</li>
		<li>Click the left half of the maxillary complex, right-click, and press Delete in the Body section.</li>
	</ol>
	</li>
	<li>Mirror the right half of the maxillary complex and create an identical left half.
	<ol>
		<li>Click Insert &#62; Pattern/Mirror &#62; Mirror, and choose the midpalatal plane in Mirror Face/Plane.</li>
		<li>Choose all the right half maxillary complex in Bodies to Mirror, and click OK to generate the left half of the maxillary complex.</li>
	</ol>
	</li>
</ol>
4. Create a Haas expander and band to the maxillary first premolars and first molars
<ol>
	<li>Construct the premolar band and molar band.
	<ol>
		<li>Click Insert &#62; Part, select the PL file, and press Open to import the CAD file.</li>
		<li>Click Insert &#62; Features &#62; Split, choose the teeth in the PL file, and set a Uniform Scaling of 1.05. Click OK to generate bands with 0.5 mm in thickness.</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the occlusal plane, and click OK to create a reference plane.</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose the occlusal plane, and set an offset distance of 1.5 mm. Click OK to create the first cutting plane.</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose the occlusal plane, and set an offset distance of 4.0 mm. Click OK to create the second cutting plane.</li>
		<li>Click Insert &#62; Features &#62; Split, and choose the first and second plane in Trim Tools and the teeth in Target Bodies. Click Cut Bodies to create a cutting preview.</li>
		<li>Tick the checkboxes in the Resulting Bodies, and click OK to separate the teeth.</li>
		<li>Click the band above the first plane and below the second plane, right-click, and press Delete in the Body section.</li>
	</ol>
	</li>
	<li>Construct the acrylic plate.
	<ol>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the hard palate plane, and click OK to create a sketch plane.</li>
		<li>Click Insert &#62; Sketch, draw an acrylic plate refer to the Haas expander, and click Exit Sketch.</li>
		<li>Click Insert &#62; Boss/Base &#62; Extrude, choose the sketch of the acrylic plate, set 5 mm in Depth, and click OK.</li>
		<li>Click Insert &#62; Features &#62; Flex, and bend the acrylic plate to fit the anatomy of the palate.</li>
		<li>Click Insert &#62; Features &#62; Fillet/Round, and fillet the sharp edges of the acrylic plate in a radius of 1 mm.</li>
	</ol>
	</li>
	<li>Construct the expander arms.
	<ol>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the band, and click OK to create a sketch plane (named P1).</li>
		<li>Click Insert &#62; Sketch, draw a circle 2 mm in diameter, and click Exit Sketch (named C1).</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the acrylic plate, and click OK to create a sketch plane (named P2).</li>
		<li>Click Insert &#62; Sketch, draw a circle 2 mm in diameter, and click Exit Sketch (named C2).</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose the P2 plane, and set an offset distance of 6 mm. Click OK to a sketch plane.</li>
		<li>Click Insert &#62; Sketch, draw a circle 2 mm in diameter, and click Exit Sketch (named C3).</li>
		<li>Click Insert &#62; Boss/Base &#62; Loft, and choose the C1, C2, and C3 sketch in the Profiles window.</li>
		<li>Select the band and the acrylic plate in the Feature Scope window, tick Merge Result in the Options window , and click OK.</li>
	</ol>
	</li>
</ol>
5. Design the osteotomy
<ol>
	<li>Create a 1 mm thick plane, equivalent to the diameter of a bur usually used by the surgeon, from the corner of the piriform aperture (Alar) towards the infra zygomatic crest (IZC) at various degrees from the horizontal plane.
	<ol>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose three feature points on the osteotomy plane (0&#176;, 10&#176;, 20&#176;, or 30&#176; to the horizontal plane), and click OK to create the plane (named O1).</li>
		<li>Click Insert &#62; Reference Geometry &#62; Plane, choose the osteotomy plane, and set an offset distance of 1.0 mm. Click OK to create an inferior cutting plane (named O2).</li>
		<li>Click Insert &#62; Features &#62; Split, choose the O1 and O2 plane in Trim Tools, and click Cut Part to create a cutting preview.</li>
		<li>Tick the checkboxes in the Resulting Bodies, and click OK to separate the maxillary complex.</li>
		<li>Click the body between O1 and O2 planes, right-click, and press Delete in the Body section.</li>
	</ol>
	</li>
	<li>Export models with different buccal osteotomy angles in Parasolid Model Part File (X_T) for analysis.
	<ol>
		<li>Click File &#62; Save as, and choose Parasolid (x_t) in the File Type list.</li>
		<li>Click Save to export the models for finite element analysis software.</li>
	</ol>
	</li>
</ol>
6. Finite element analysis
<ol>
	<li>Import and set the material parameters of the maxillary complex model into Ansys software.
	<ol>
		<li>Click and drag the Static Structural in Toolbox to create an analysis workspace.</li>
		<li>Double click the Engineering Data, and set Young&#39;s modulus and Poisson&#39;s ratio of all the materials in Properties. The material properties of different structures12,15,16 are listed in Table 1.</li>
		<li>Double-click Geometry, click File &#62; Import External Geometry File, then click Generate to import the maxillary complex model.</li>
		<li>Click Create &#62; Boolean, and generate the cortical bone and periodontal ligament by Boolean with the cancellous bone and teeth.</li>
	</ol>
	</li>
	<li>Set up the finite element analysis model.
	<ol>
		<li>Double-click the Model, and click Geometry to select the material properties for each part.</li>
		<li>Right-click Mesh and click Generate Mesh to build the elements on the model.</li>
		<li>Click Connections, and assign the soft/small part in Contact Bodies and the stiff/large part in Target Bodies.</li>
		<li>Assign the contact type and friction coefficient in Definition. The connection properties of different parts17 are listed in Table 2.</li>
		<li>Right-click Connections, click Insert &#62; Spring to connect the upper and lower parts of the osteotomy plane. Set the springs as 1 mm long with spring constant k = 60 N/mm and place one spring at each grid node.</li>
	</ol>
	</li>
	<li>Set a clinically acceptable force along the x-axis (perpendicular to the midline) on the acrylic plate on various combinations of osteotomies.
	<ol>
		<li>Right-click Static Structural, click Insert &#62; Fixed Support and set the structure on the palatal plane immovable.</li>
		<li>Right-click Static Structural, click Insert &#62; Force and set a 150 N force to apply on the acrylic plate with a direction away from the medial line.</li>
		<li>Right-click Solution, and click Insert &#62; Deformation &#62; Total to monitor the deformation of the expansion.</li>
	</ol>
	</li>
	<li>Conduct a convergence test until expansions on both sides are achieved.
	<ol>
		<li>Click Solve on the toolbars, and wait until the Force Convergence level reaches the Force Criterion.</li>
		<li>Click Total Deformation to display the expansion results.</li>
	</ol>
	</li>
	<li>Measure the displacements of the anatomic landmarks&#160;in all three dimensions&#160;as the results of expansion. Suggest the following landmarks to be used to evaluate the expansion pattern: 
	Mesioincisal line angle of the maxillary central incisor (U1). 
	Buccal cusp tip of the maxillary first premolar (U4). 
	Mesiobuccal cusp tip of the maxillary first molar (U6). 
	Lateroinferior corner of the piriform aperture (Alar). 
	Infra-zygomatic crest (IZC). 
	Midpoint of the expander.</li>
</ol>

Analysis of Expansion Patterns from SARPE Using Finite Element Models

<ol>
	<li>Mommaerts, M. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transpalatal+distraction+as+a+method+of+maxillary+expansion.">Transpalatal distraction as a method of maxillary expansion.</a> British Journal of Oral and Maxillofacial Surgery. 37 (4), 268-272 (1999).</li><li>Betts, N. J., Vanarsdall, R. L., Barber, H. D., Higgins-Barber, K., Fonseca, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diagnosis+and+treatment+of+transverse+maxillary+deficiency.">Diagnosis and treatment of transverse maxillary deficiency.</a> The International Journal of Adult Orthodontics and Orthognathic Surgery. 10 (2), 75-96 (1995).</li><li>Lin, J. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Asymmetric+maxillary+expansion+introduced+by+surgically+assisted+rapid+palatal+expansion:+A+systematic+review.">Asymmetric maxillary expansion introduced by surgically assisted rapid palatal expansion: A systematic review.</a> Journal of Oral and Maxillofacial Surgery. 80 (12), 1902-1911 (2022).</li><li>Chamberland, S., Proffit, W. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Short-term+and+long-term+stability+of+surgically+assisted+rapid+palatal+expansion+revisited.">Short-term and long-term stability of surgically assisted rapid palatal expansion revisited.</a> American Journal of Orthodontics and Dentofacial Orthopedics. 139 (6), 815-822 (2011).</li><li>Verlinden, C. R., Gooris, P. G., Becking, A. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Complications+in+transpalatal+distraction+osteogenesis:+a+retrospective+clinical+study.">Complications in transpalatal distraction osteogenesis: a retrospective clinical study.</a> Journal of Oral and Maxillofacial Surgery. 69 (3), 899-905 (2011).</li><li>de Assis, D. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Finite+element+analysis+of+stress+distribution+in+anchor+teeth+in+surgically+assisted+rapid+palatal+expansion.">Finite element analysis of stress distribution in anchor teeth in surgically assisted rapid palatal expansion.</a> International Journal of Oral and Maxillofacial Surgery. 42 (9), 1093-1099 (2013).</li><li>Han, U. A., Kim, Y., Park, J. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+finite+element+analysis+of+stress+distribution+and+displacement+of+the+maxilla+following+surgically+assisted+rapid+maxillary+expansion.">Three-dimensional finite element analysis of stress distribution and displacement of the maxilla following surgically assisted rapid maxillary expansion.</a> Journal of Cranio-Maxillofacial Surgery. 37 (3), 145-154 (2009).</li><li>Lee, S. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+bone-borne+rapid+maxillary+expanders+with+and+without+surgical+assistance+on+the+craniofacial+structures+using+finite+element+analysis.">Effect of bone-borne rapid maxillary expanders with and without surgical assistance on the craniofacial structures using finite element analysis.</a> American Journal of Orthodontics and Dentofacial Orthopedics. 145 (5), 638-648 (2014).</li><li>M&#246;hlhenrich, S. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simulation+of+three+surgical+techniques+combined+with+two+different+bone-borne+forces+for+surgically+assisted+rapid+palatal+expansion+of+the+maxillofacial+complex:+a+finite+element+analysis.">Simulation of three surgical techniques combined with two different bone-borne forces for surgically assisted rapid palatal expansion of the maxillofacial complex: a finite element analysis.</a> International Journal of Oral and Maxillofacial Surgery. 46 (10), 1306-1314 (2017).</li><li>Nowak, R., Olejnik, A., Gerber, H., Fr&#261;tczak, R., Zawi&#347;lak, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+tooth-+and+bone-borne+appliances+on+the+stress+distributions+and+displacement+patterns+in+the+facial+skeleton+in+surgically+assisted+rapid+maxillary+expansion-A+finite+element+analysis+(FEA)+study.">Comparison of tooth- and bone-borne appliances on the stress distributions and displacement patterns in the facial skeleton in surgically assisted rapid maxillary expansion-A finite element analysis (FEA) study.</a> Materials (Basel). 14 (5), 1152 (2021).</li><li>Shi, Y., Zhu, C. N., Xie, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Displacement+and+stress+distribution+of+the+maxilla+under+different+surgical+conditions+in+three+typical+models+with+bone-borne+distraction:+a+three-dimensional+finite+element+analysis.">Displacement and stress distribution of the maxilla under different surgical conditions in three typical models with bone-borne distraction: a three-dimensional finite element analysis.</a> Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie. 81 (6), 385-395 (2020).</li><li>Tomazi, F. H. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Hyrax+appliance+with+tooth+anchorage+variations+in+surgically+assisted+rapid+maxillary+expansion:+a+finite+element+analysis.">The Hyrax appliance with tooth anchorage variations in surgically assisted rapid maxillary expansion: a finite element analysis.</a> Oral and Maxillofacial Surgery. , (2022).</li><li>Trivedi, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Finite+element+analysis:+A+boon+to+dentistry.">Finite element analysis: A boon to dentistry.</a> Journal of Oral Biology and Craniofacial Research. 4 (3), 200-203 (2014).</li><li>Sankar, S. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparison+of+different+osteotomy+techniques+with+and+without+pterygomaxillary+disjunction+in+surgically+assisted+maxillary+expansion+utilizing+modified+hybrid+rapid+maxillary+expansion+device+with+posterior+implants:+A+finite+element+study.">A comparison of different osteotomy techniques with and without pterygomaxillary disjunction in surgically assisted maxillary expansion utilizing modified hybrid rapid maxillary expansion device with posterior implants: A finite element study.</a> National Journal of Maxillofacial Surgery. 12 (2), 171-180 (2021).</li><li>Han, U. A., Kim, Y., Park, J. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+finite+element+analysis+of+stress+distribution+and+displacement+of+the+maxilla+following+surgically+assisted+rapid+maxillary+expansion.">Three-dimensional finite element analysis of stress distribution and displacement of the maxilla following surgically assisted rapid maxillary expansion.</a> Journal of Craniomaxillofacial Surgery. 37 (3), 145-154 (2009).</li><li>Esen, A., Soganci, E., Dolanmaz, E., Dolanmaz, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+stress+by+finite+element+analysis+of+the+midface+and+skull+base+at+the+time+of+midpalatal+osteotomy+in+models+with+or+without+pterygomaxillary+dysjunction.">Evaluation of stress by finite element analysis of the midface and skull base at the time of midpalatal osteotomy in models with or without pterygomaxillary dysjunction.</a> British Journal of Oral &amp; Maxillofacial Surgery. 56 (3), 177-181 (2018).</li><li>Huzni, S., Oktianda, F., Fonna, S., Rahiem, F., Angriani, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+use+of+frictional+and+bonded+contact+models+in+finite+element+analysis+for+internal+fixation+of+tibia+fracture.">The use of frictional and bonded contact models in finite element analysis for internal fixation of tibia fracture.</a> Frattura ed Integrit&#224; Strutturale. 61, 130-139 (2022).</li><li>Holmes, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Closing+the+gap.">Closing the gap.</a> Nature. 550 (7677), S194-S195 (2017).</li><li>Lombardo, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+the+stiffness+characteristics+of+rapid+palatal+expander+screws.">Evaluation of the stiffness characteristics of rapid palatal expander screws.</a> Progress in Orthodontics. 17 (1), 36 (2016).</li><li>Zandi, M., Miresmaeili, A., Heidari, A., Lamei, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+necessity+of+pterygomaxillary+disjunction+in+surgically+assisted+rapid+maxillary+expansion:+A+short-term,+double-blind,+historical+controlled+clinical+trial.">The necessity of pterygomaxillary disjunction in surgically assisted rapid maxillary expansion: A short-term, double-blind, historical controlled clinical trial.</a> Journal of Cranio-Maxillofacial Surgery. 44 (9), 1181-1186 (2016).</li><li>M&#246;hlhenrich, S. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+effects+of+pterygomaxillary+disconnection+during+surgically+assisted+rapid+palatal+expansion:+a+cadaveric+study.">Three-dimensional effects of pterygomaxillary disconnection during surgically assisted rapid palatal expansion: a cadaveric study.</a> Oral Surgery, Oral Medicine, Oral Pathology, and Oral Radiology. 121 (6), 602-608 (2016).</li></ol>

The authors declare no conflict of interest.

The direction of the buccal osteotomy in SARPE can be either a horizontal cut from the nasal aperture before stepping down at the maxillary buttress area or a ramped cut from the piriform rim towards the buttress corresponding to the maxillary first molar, as described by Betts2. Either way, the osteotomy extends well below the zygomatic process of the maxilla. However, most current FEA studies on SARPE use a horizontal cut extending posteriorly at the same level as the piriform rim<sup class="xre...

Surgically assisted rapid palatal expansion (SARPE) is a commonly used technique for transversely expanding the maxillary bony structure and the dental arch in skeletally mature patients1. The surgery involves a LeFort I osteotomy, a mid-palatal corticotomy, and, optionally, the release of the pterygoid-maxillary fissure2. However, undesired expansion patterns from SARPE, such as uneven expansion between left and right hemimaxillae3 and dentoalveolar process buccal tipping/rotation4, have been reported, which could lead to failure of SARPE, and sometimes, even requiring additional surgeries for correction5. Previous studies have indicated that the variation in circum-maxillary osteotomies may play a significant role in post-SARPE expansion pattern2,3, as the collisions between the bone blocks at the Le Fort I osteotomy sites can contribute to the uneven resisting force of lateral expansion of the hemimaxillae and to the rotation of the hemimaxillae with the alveolar edges below the cut moving inwards while the dentoalveolar process expands3,4. Therefore, there is a need to investigate the effects of different osteotomy directions, especially the buccal osteotomy, on post-SARPE expansion patterns.
Several finite element analysis (FEA) models have been set up to evaluate the force distribution during SARPE. However, the amount of expansion set in these models is limited to up to 1 mm, which is far below the required clinical amount6,7,8,9,10,11,12. Inadequate expansion in FEA models can lead to erroneous predictions of post-SARPE outcomes. More specifically, the collision between the bones at the osteotomy site, as reported by Chamberland and Proffit4, may not be demonstrated if the expander is not adequately turned, which may not reflect the true clinical reality. With the limited amount of expansion built in the previous models, the outcome evaluations of these models were focused on stress analysis. However, the stress analysis of FEA in dentistry is usually conducted under static loading with the mechanical properties of materials set as isotropic and linearly elastic, which further restricts the clinical relevance of the FEA studies13.
Furthermore, most of these studies did not consider the thickness of the surgical instrument at the osteotomy site6,7,8,10,11,12, often setting friction to zero at the cuts as part of the boundary conditions. However, this setting oversimplifies the contacts between the hard and soft tissues. It may significantly impact the distribution of force and the resulting expansion pattern of the hemimaxillae.
Nevertheless, no available literature has investigated the effect of osteotomy on post-SARPE asymmetry using finite element analysis (FEA) models. All the current studies employed models with symmetrical osteotomy patterns6,7,8,9,10,11,12,14, which do not reflect the reality of clinical practice where the osteotomies may differ on each side of the skull. The lack of literature examining the effect of asymmetrical osteotomies on post-SARPE asymmetry represents a significant knowledge gap that must be addressed.
Therefore, the goal of this study is to develop a novel FEA model of SARPE that can truly mimic the clinical conditions, including the expansion amount and osteotomy gap, and investigate the expansion patterns of the hemimaxillae in all three dimensions with various designs of the osteotomy. Such an approach would provide valuable insight into the mechanics underlying post-SARPE expansion patterns and serve as a useful tool for clinicians in the planning and execution of SARPE procedures.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Ansys</td>
			<td>Ansys</td>
			<td>Version 2019</td>
			<td>Ansys is a software for finite element analysis that can solve complicated models based on differential equations. The expansion results of different buccal osteotomy angles were analyzed through this software.</td>
		</tr>
		<tr>
			<td>Geomagic Studio</td>
			<td>3D Systems</td>
			<td>Version 10</td>
			<td>Geomagic Studio is a software for reverse engineering that can generate digital models based on physical scanning points. This study built cancellous bone and periodontal ligaments through this software.</td>
		</tr>
		<tr>
			<td>Mimics</td>
			<td>Materialise</td>
			<td>Version 16</td>
			<td>Mimics is a medical 3D image-based engineering software that efficiently converts CT images to a 3D model. This study reconstructed a maxilla complex through the patient&#39;s DICOM images.</td>
		</tr>
		<tr>
			<td>SolidWorks</td>
			<td>Dassault Syst&#232;mes</td>
			<td>Version 2018</td>
			<td>SolidWorks is a computer-aided design software for designers and engineers to create 3D models. A Haas expander was designed and drawn through this software in this study.</td>
		</tr>
	</tbody>
</table>

finite element analysis model for assessing expansion patterns from surgically assisted rapid palatal expansion

Surgically assisted rapid palatal expansion (SARPE) was introduced to release bony resistance to facilitate skeletal expansion in skeletally mature patients. However, asymmetric expansion between the left and right sides has been reported in 7.52% of all SARPE patients, of which 12.90% had to undergo a second surgery for correction. The etiologies leading to asymmetric expansion remain unclear. Finite element analysis has been used to evaluate the stress associated with SARPE in the maxillofacial structures. However, as a collision of the bone at the LeFort I osteotomy sites occurs only after a certain amount of expansion, most of the existing models do not truly represent the force distribution, given that the expansion amount of these existing models rarely exceeds 1 mm. Therefore, there is a need to create a novel finite element model of SARPE that could perform a clinically required amount of expander activation for further analysis of the expansion patterns of the hemimaxillae in all three dimensions. A three-dimensional (3D) skull model from cone beam computed tomography (CBCT) was imported into Mimics and converted into mathematical entities to segment the maxillary complex, maxillary first premolars, and maxillary first molars. These structures were transferred into Geomagic for surface smoothing and cancellous bone and periodontal ligament creation. The right half of the maxillary complex was then retained and mirrored to create a perfectly symmetrical model in SolidWorks. A Haas expander was constructed and banded to the maxillary first premolars and first molars. Finite element analysis of various combinations of buccal osteotomies at different angles with 1 mm clearance was performed in Ansys. A convergence test was conducted until the desired amount of expansion on both sides (at least 6 mm in total) was achieved. This study lays the foundation for evaluating how buccal osteotomy angulation influences the expansion patterns of SARPE.

Author Spotlight: Development of a Novel Finite Element Analysis Model for Improved Orthognathic Surgical Techniques 

Finite Element Analysis Model for Assessing Expansion Patterns from Surgically Assisted Rapid Palatal Expansion

SARPE is commonly used for maxillary expansion in skeletal immature patients. However, asymmetric expansion has been reported with unknown etiologies. This study aims to develop a novel FEA model of SARPE that can truly mimic the clinical conditions, and to investigate the expansion patterns of the hemi-maxilla in all three dimensions.Finite element analysis has been used in the dental and bioengineering field to allow in vitro simulation of surgeries, such as SARPE. In this study, four software were utilized to set up the FEA model and to predict expansion pattern. The most challenging part, which most previous studies link, is to simulate forces at the wound healing site across osteotomy surface.To achieve this, springs were set in our pilot study and is considered a novel design for SARPE FEA. This unified element model focused on its patient patterns, making it more realistic SARPE simulation through osteotomy gap creation and experience inclusion. It presents significant potential as the clinical tool for branding and its guiding SARPE procedures.Our interdisciplinary group will work diligently to develop cutting-edge 3D models that can provide valuable insights into personalized treatment strategies to analyze and improve orthognatic surgical technique by utilizing an engineering-assisted approach and to improve communication and collaboration between orthodontists and oral maxillofacial surgeons through engineering-assisted 3D imaging system.

The demonstration model utilized the CBCT image of a 47-year-old female with maxillary deficiency. In the generated model, the anatomic structure of the nasal cavity, the maxillary sinus, and the periodontal ligament space for the expander anchored teeth (first premolar and first molar) are preserved (Figure 1).
To simulate the surgical procedure accurately, the nasal septum, lateral walls of the nasal cavity, and pterygomaxillary fissure were separated from the m...

Watch this Scientific Journal Video about Development of a Novel Finite Element Analysis Model for Improved Orthognathic Surgical Techniques at JoVE.com

A set of novel finite element models of surgically assisted rapid palatal expansion (SARPE) that could perform a clinically required amount of expander activation with various angles of buccal osteotomy was created for further analysis of the expansion patterns of the hemimaxillae in all three dimensions.

Surgically assisted rapid palatal expansion (SARPE) was introduced to release bony resistance to facilitate skeletal expansion in skeletally mature ...

finite-element-analysis-model-for-assessing-expansion-patterns-from

Research

JoVE Journal

Bioengineering

Finite Element Analysis Model: Osteotomy Design to Detect Palatal Expansion

To begin, launch the SolidWorks software to create a one-millimeter thick plane from the piriform aperture towards the infra-zygomatic crest. Now open the Insert menu, then click on Reference Geometry and Plane options. From the osteotomy plane, select three feature points and click OK to create the O1 plane.Navigate to the plane again by clicking on Insert and Reference Geometry. This time, choose the osteotomy plane and set an offset distance of one millimeter. Click OK to create a lower cutting plane marked O2.Now navigate to split by selecting Insert, followed by Features, and choose the O1 and O2 planes in Trim Tools.Select the target bodies and press Cut Bodies to create a cutting preview. Next, tick the check boxes in the Resulting Bodies section and press OK to separate the maxillary complex. Then click on the body between the O1 and O2 planes, right-click, and press Delete under the Body section.To export the models with different buccal osteotomy angles, first click on File, then Save As, and choose Parasolid x_t from the file type list. Finally, click Save to export the models for finite element analysis software. The demonstrated analysis used the cone-beam computed tomography image of a 47-year-old female with maxillary deficiency to generate a model.For accurate surgery simulation, the nasal septum, lateral nasal cavity walls, and pterygomaxillary fissure were separated.

Expansion Assessment Using Finite Element Analysis from Surgically Assisted Rapid Palatal Expansion (SARPE)

To begin, launch the Ansys software to import the material parameters of the maxillary complex model into the software. Next, click and drag the static structural in the toolbox to create an analysis workspace. Double click on engineering data, followed by linear elastic under toolbox, and set the Young's modulus and Poisson's ratio for all the materials in properties.Now, double click on geometry, followed by file, then select import external geometry file, and click generate to import the maxillary complex model. Then click create, followed by Boolean, and generate the cortical and periodontal ligament Boolean with cancellous bone and teeth. To set up the finite element analysis model, double click on the model, then select geometry to determine the material properties for each part.Next, right click on mesh and press generate mesh to build the model elements. Now, click connections and assign the soft or small part in contact bodies, and the stiff or large part in target bodies, then assign the contact type and friction coefficient in definition. Next, right click connections and select insert, then press spring to connect the upper and lower parts of the osteotomy plane.Set the springs to one millimeter length with a spring constant K set at 60 newtons per millimeter. Place one spring at each grid node. After setting a clinically acceptable force along the X axis, right click the static structural option.Press insert, followed by fixed support to render the structure on the palatal plane as immovable. To apply force on the acrylic plate away from the medial line, click on static structural, then insert and set the force to 150 newtons. Then right click solution followed by insert, deformation, and total to monitor the expansion deformation.Finally, to carry out a convergence test, select solve in the toolbars and wait until the force convergence level reaches the force criterion. Then click on solution information, followed by total deformation to display the expansion results. The demonstrated model used the cone beam computed tomography image of a 47-year-old female with maxillary deficiency to create a model.For accurate surgery simulation, the naval septum, lateral nasal cavity walls, and pterygo-maxillary fissure were separated. A preliminary test performed on both the left and right sides of the model with symmetric, zero degree cuts, showed that 150 newtons of force caused more than eight millimeters of expansion. Additionally, a variety of angles were built to mimic different clinical conditions.The right and left expansions were visible as a before and after color map of the maxilla models.

906 Views.  University of Pennsylvania.  A set of novel finite element models of surgically assisted rapid palatal expansion (SARPE) that could perform a clinically required amount of expander activation with various angles of buccal osteotomy was created for further analysis of the expansion patterns of the hemimaxillae in all three dimensions.

Analysis of Expansion Patterns from SARPE Using Finite Element Models

Краткое содержание