Comparing the Frequency Effect Between the Lexical Decision and Naming Tasks in Chinese

Summary

Researchers adopt both the lexical decision task and the naming task to investigate some important topics such as character/word recognition by comparing the frequency effect between these two tasks. This article introduces this approach through two exemplar experiments and elaborates on the underlying logic.

Abstract

In psycholinguistic research, the frequency effect can be one of the indicators for eligible experimental tasks that examine the nature of lexical access. Usually, only one of those tasks is chosen to examine lexical access in a study. Using two exemplar experiments, this paper introduces an approach to include both the lexical decision task and the naming task in a study. In the first experiment, the stimuli were Chinese characters with frequency and regularity manipulated. In the second experiment, the stimuli were switched to Chinese two-character words, in which the word frequency and the regularity of the leading character were manipulated. The logic of these two exemplar experiments was to explore some important issues such as the role of phonology on recognition by comparing the frequency effect between both the tasks. The results revealed different patterns of lexical access from those reported in the alphabetic systems. The results of Experiment 1 manifested a larger frequency effect in the naming task as compared to the LDT, when the stimuli were Chinese characters. And it is noteworthy that, in Experiment 1, when the stimuli were regular Chinese characters, the frequency effect observed in the naming task was roughly equivalent to that in the LDT. However, a smaller frequency effect was shown in the naming task as compared to the LDT, when the stimuli were switched to Chinese two-character words in Experiment 2. Taking advantage of the respective demands and characteristics in both tasks, researchers can obtain a more complete and precise picture of character/word recognition.

Introduction

In the reading experience, higher occurrence of a word increases the speed at which it will be identified, which is known as the frequency effect in the psycholinguistic field. Manipulating the variable of word frequency in psychophysical research, people observed lower thresholds of recognizing common words^1,2. In the late 1970s, the word frequency has been widely regarded as one of most important variables influencing word identification^3,4. Focusing on the word frequency and involving other related variables, most theories in explaining the word recognition had been constructed and spread^5-9. Hence if it is claimed that one task can capture the process of word recognition effectively, it should be sensitive to the changes of word frequency. In the literature of written word recognition, both the lexical decision task (LDT) and naming tasks meet this criterion and researchers usually chose one of them to probe into the underlying mechanism of recognition.

Among research about word recognition in different languages, the LDT and naming task have been the classical experimental methods that use response-time measures to understand the mental processes of reading. In the LDT, researchers measure the time of the participant's decision making about whether a written stimulus is a word or not. As for the naming task, researchers measure how long it takes for the participant to speak a written word aloud. However, either of the two tasks has its own task demands and limitations. The LDT involves a discrimination process between words and non-words/pseudo-words, and a decision-making process of the participant. The naming task requires the participant to pronounce the stimuli, and phonological information must be used to fulfill the task requirement.

Results of the two tasks in previous research manifested different frequency effects in variety of scripts. In the alphabetic systems, the LDT manifested a larger frequency effect than the naming task³. In opinions of Balota and Chumbley (1984), the lower-frequency words have similar orthography with the non-words/pseudo-words. Thus, it takes longer for participants to discriminate the orthographic similarities to make the accurate response, which possibly exaggerates the frequency effect in the LDT. While in the naming task, especially when stimuli are from languages of shallow orthography, participants may pronounce the word using the orthography-to-phonology (O-P) conversion rules to make a response before they truly identify it. This naming demand has been taken as evidence of possible pre-lexical phonology on recognition in alphabetic languages. Such a naming strategy is argued to undermine the frequency effect¹⁰. In sum, although sensitive reflections to the manipulation of word frequency can be observed in both tasks, the LDT and the naming task may capture different stages and characteristics of the recognition process. To obtain a more precise and complete view, the proper way is adopting the two tasks meanwhile and comparing the patterns of their results.

Different from the alphabetic languages, Chinese has the characteristic of deeper orthography and involves the concept of characters in addition to words. In general, a Chinese word (e.g., , jiā rén, family member) is composed by two characters ("", jiā, family; "", rén, person). Before a word is identified, the recognition process of characters within the word should be finished¹¹. In light of the unique psycholinguistic characteristics, the recognition process of a character or word in Chinese is quite distinct from the word recognition in alphabetic systems. If studies combine the LDT and the naming task in the same experiment to investigate frequency effect in Chinese, interesting revelations can be shown, e.g., phonological activation regarding visual character/word recognition. In processing Chinese characters, the use of the naming task shows a larger frequency effect than the LDT, which implies the existence of post-lexical phonology^{12, 13}. Switching the stimuli to Chinese two-character words, a reversal pattern occurs. A larger frequency effect is found in the LDT than that in the naming, suggesting the existence of pre-lexical phonology. The participant produces the oral response according to the phonological information of the component characters, before the whole word is identified^{11, 14}. Moreover, results after manipulating the regularity of the characters in the stimuli can reveal valuable information about phonological processing, and help researchers make inferences about when the retrieval of phonology occurs. The following experiments showed how the researchers combined the LDT and the naming task to investigate the frequency effect of Chinese characters and words to elaborate the underlying logic.

Access restricted. Please log in or start a trial to view this content.

Protocol

All subjects must give informed written consent before the administration of experimental protocols. All procedures, consent forms, and the experimental protocol were approved by the Research Ethics Committee of National Taiwan University.

1. Comparing the Frequency Effect between the Lexical Decision and Naming Tasks in Chinese Character Recognition (Experiment 1)

1. Recruit the Participants
   1. Recruit forty-four students from National Taiwan University to participate in both the LDT and the naming task. The participants must be native Chinese speakers with normal or corrected-to-normal vision, and fluent in listening, speaking, reading and writing Mandarin. All of them were right-handed.
2. Materials
   1. Select a total of 180 characters from Chinese character database of Wu and Liu (1987). Use 90 high-frequency characters and 90 low-frequency characters. According to Wu and Liu (1987), the high-frequency character is defined by the occurrence more than 100, and the low-frequency is defined by the occurrence from 1 to 15, among a total frequency of about one million in the database. Balance the important lexical characteristics (frequency, number of strokes, and/or other properties, etc.) of the materials chosen across conditions.
   2. Based on the phonology of the phonetic radical and the character, ensure that the characters contain three regularity types: regular, in which the phonetic radical and the character share the same pronunciation (ignoring the tones); irregular, in which there are differences between their pronunciations; and non-phonogram, in which the character cannot be defined as a phonogram.
   3. Classify each character into one of the six categories: (1) high-frequency, regular (e.g., , bāo, compatriot) (2) high-frequency, irregular (e.g., , bīng, ice) (3) high-frequency, non-phonogram (e.g., , duàn, section) (4) low-frequency, regular (e.g., , bàn, stumble) (5) low-frequency, irregular (e.g., , fēi, wife of a prince) (6) low-frequency, non- phonogram (e.g., , duò, lazy). Each category contains 30 characters.
   4. Using TrueType (built in the Windows OS), construct 180 pseudo-characters by keeping the right radical of the characters and changing the left radical to another one. Make sure that there is no significant difference in the numbers of strokes between the characters and pseudo-characters.
      1. Start the TrueType program. When a dialog box appears, click the OK button and start the program to construct the pseudo-characters. Click the Windows-Reference in the menu, then a reference panel will show up and choose a proper font.
      2. Input one real character in the blank box of the panel and click the OK button. Two panels will appear side by side on the screen. In the right panel of constructing characters, use the tool of Free Selection button to select the left radical of this real character with a circle. Move the left radical to the left panel of constructing characters. Then the left radical of the pseudo-characters has been made.
      3. Click the Windows-Reference in the menu again, and adopt the similar procedures to select the right radical of another real character. Move the right radical to the left panel of constructing characters. Put the two radicals together and make sure the combination of those two radicals is meaningless in the lexicon. A pseudo-character has been constructed. Then save the pseudo-character in the computer.
   5. Adopt a frequency (high, low) by regularity (regular, irregular, and non-phonogram) within-subject factorial design. Set the type of task as a between-subject variable.
   6. Randomize all the items.
3. The LDT
   1. Use a standard experimental software, such as the E-Prime, to program the experiment according to software protocols.
   2. Make sure that 50% of the stimuli are characters for the "Yes response" and the others are pseudo-characters for the "No response".
   3. Ask the participants to judge whether the written stimulus appearing on the screen is a real character or not. Instruct them to respond as accurately and quickly as possible by pressing one of two keys, one is for "Yes response", and the other is for "No response". Remind all the participants to use right hand when making responses.
   4. Start each trial with an asterisk to indicate a fixation point at the center of the monitor for 500 msec, accompanied by a 100 Hz warning tone for 200 msec, followed by a blank screen appeared for 500 msec.
   5. After the asterisk, show the target character, which subtends a visual arc of approximately 2 degrees, from a 70 cm viewing distance, until the computer detects the participant's key stroke, and measure the response time (RT) from the onset of the target character until a key-press response is made.
   6. Set the time interval between one trial and the next with a blank screen for 1,000 msec. The computer will record the RT and accuracy rate of the participants' responses in the LDT by keyboard pressing.
   7. Provide all the instruction both in written format on computer screen and verbally, and participants performed the task individually.
      NOTE: In the exemplar experiment 1, the task included a practice session having 20 trials with feedback. During the experiment session, participants had a rest every 36 trials. A typical session including the practice one will take a participant 25 - 30 min to complete.

2. Comparing the Frequency Effect between the Lexical Decision and Naming Tasks in Chinese Word Recognition (Experiment 2)

1. Recruit the Participants
   1. Recruit thirty-six students from National Taiwan University to participate in both the LDT and the naming task. The recruitment criterion is the same as that in Protocol 1.
2. Materials
   1. Select a total of 288 two-character words, in which half of them are real words and the other half are pseudo-words. According to Wu and Liu (1987), the high-frequency word is defined by the occurrence more than 50. Balance the important lexical characteristics (frequency, and/or other properties, etc.) of the materials chosen across conditions.
   2. Based on the phonology of the phonetic radical and the character, ensure that the leading character within the words contains three regularity types: regular, in which the phonetic radical and the character share the same pronunciation (ignoring the tones); irregular, in which there are differences between their pronunciations; and non-phonogram, in which the character cannot be defined as a phonogram.
   3. Control the leading characters within the real words for frequency across regularity types and make sure that the leading characters within the pseudo-words (e.g., , xiàn què) are different from those in the real words.
   4. Adopt a frequency (high, low) by regularity (regular, irregular, and non-phonogram) within-subject factorial design.
   5. Classify each word into one of the six categories: (1) high-frequency, regular leading character (e.g., , bù zhì, arrange) (2) high-frequency, irregular leading character (e.g., , bàn yǎn, play the role) (3) high-frequency, non-phonogram leading character (e.g., , bò shì, doctor) (4) low-frequency, regular leading character (e.g., , bù jú, distribution) (5) low-frequency, irregular leading character (e.g., , bàn xiàng, actor in costume) (6) low-frequency, non-phonogram leading character (e.g., , bò xué, eruditely).
   6. Assign all the stimuli into two blocks, and make each block correspond to a task type. Counterbalance the order of blocks among the participants.
   7. Randomize all the trials within each block.
3. The LDT
   1. Use a standard experimental software, such as the E-Prime, to program the experiment according to software protocols.
   2. Make sure that 50% of the stimuli are words for the "Yes response" and the others are pseudo-words for the "No response".
   3. Ask the participants to judge whether the written stimulus appearing on the screen is a real word or not. Instruct them to respond as accurately and quickly as possible by pressing one of two keys, one is for "Yes response", and the other is for "No response". Remind all the participants to use right hand when making responses.
   4. Set the same requirements and arrangements as in Experiment 1, except that the stimulus on the screen is a word or pseudo-word instead of a character or pseudo-character.
   5. Provide all the instruction both in written format on computer screen and verbally, and participants performed the task individually.
4. The Naming Task
   1. Use a standard experimental software, such as the E-Prime, to program the experiment according to software protocols.
   2. Make sure that 50% of the stimuli are words for the "Yes response" and the others are pseudo-words for the "No response".
   3. Ask the participants to pronounce the written words or pseudo-words on the screen. Instruct them to make a response as accurately and quickly as possible.
   4. Set the same requirements and arrangements as in Experiment 1, except that the stimulus on the screen is a word or pseudo-word instead of a character or pseudo-character.
   5. Provide all the instruction both in written format on computer screen and verbally, and participants performed the task individually.

Access restricted. Please log in or start a trial to view this content.

Results

The frequency effect was observed to be robust in both the two tasks, the evidence of which was significantly shorter RT for the high-frequency characters. More importantly, a frequency by task interaction was found. Post-hoc comparisons showed a larger frequency effect in the naming task than in the LDT, which was different from those reported by the studies in the alphabetic systems.

Moreover, a regularity by frequency interac...

Access restricted. Please log in or start a trial to view this content.

Discussion

This study demonstrates that the differences in frequency effects between the two tasks can help to elucidate the role of phonology on recognition such as pre-lexical and post-lexical phonology. In Chinese character recognition (Experiment 1), the phonology process may be post-lexical with a larger frequency effect in the naming task than in the LDT. This finding is different from the results reported in alphabetic languages. In Chinese word recognition (Experiment 2), a smaller frequency effect in the naming task may be...

Access restricted. Please log in or start a trial to view this content.

Materials

Name	Company	Catalog Number	Comments
Standard PC
E-Prime (version 2.0)	Psychology Software Tools
Serial Response Box	Psychology Software Tools		The serial response box includes the voice key, which  allows researchers to collect vocal latencies with confidence.
Microphone			It can be used to detect the incoming sound by the participant