Quantification of Proliferative and Dead Cells in Enteroids

Summary

The presented protocol uses flow cytometry to quantify the number of proliferating and dead cells in cultured mouse enteroids. This method is helpful to evaluate the effects of drug treatment on organoid proliferation and survival.

Abstract

The intestinal epithelium acts as a barrier that prevents luminal contents, such as pathogenic microbiota and toxins, from entering the rest of the body. Epithelial barrier function requires the integrity of intestinal epithelial cells. While epithelial cell proliferation maintains a continuous layer of cells that forms a barrier, epithelial damage leads to barrier dysfunction. As a result, luminal contents can across the intestinal barrier via an unrestricted pathway. Dysfunction of intestinal barrier has been associated with many intestinal diseases, such as inflammatory bowel disease. Isolated mouse intestinal crypts can be cultured and maintained as crypt-villus-like structures, which are termed intestinal organoids or “enteroids”. Enteroids are ideal to study the proliferation and cell death of intestinal epithelial cells in vitro. In this protocol, we describe a simple method to quantify the number of proliferative and dead cells in cultured enteroids. 5-ethynyl-2’-deoxyuridine (EdU) and propidium iodide are used to label proliferating and dead cells in enteroids, and the proportion of proliferating and dead cells are then analyzed by flow cytometry. This is a useful tool to test the effects of drug treatment on intestinal epithelial cell proliferation and cell survival.

Introduction

A fundamental function of intestinal epithelial cells is to protect the entry of luminal contents such as pathogenic bacteria and toxins^1,2. To perform such a function, intestinal stem cells continuously proliferate and differentiate into a variety of epithelial cells, including enterocytes and secretory cells, which form a barrier by forming tight connections³. The rapid renewal of intestinal epithelial cells requires strict coordination of cell proliferation, cell differentiation, and cell death^4,5. Reduced cell proliferation or excessive cell death leads to epithelial damage and compromised barrier function^1,6. Dysfunction of intestinal barrier has been associated with inflammatory bowel diseases^7,8.

A method to culture intestinal crypts has been previously developed. Using this technique, isolated mouse crypts grow into intestinal organoids (enteroids), which have crypt-villus like structures and contain all intestinal epithelial cell lineage^9,10. 5-Ethynyl-2'-deoxyuridine (EdU) is a thymidine analog that is capable of replacing thymine (T) in DNA that is undergoing replication during cell proliferation. The proliferative cells can be quickly and accurately labeled by EdU staining. Propidium iodide (PI) is an analog of ethidium bromide that releases red fluorescence upon insertion into double-stranded DNA. PI specifically detects dead cells, since it only passes through the damaged cell membrane.

In this protocol, we first describe how to isolate crypts from the murine small intestine then culture them as enteroids in vitro. We then describe how to analyze the proliferative and dead cells in enteroids by EdU and PI incorporation and flow cytometry.

Protocol

This protocol was approved by the Animal Care and Use Committee of Cambridge-Suda Genomic Resource Center (CAM-SU) at Soochow University.

1. Intestinal Organoid Isolation and Culture

1. Isolation of intestinal crypts and enteroid culture
   1. Euthanize an 8-week-old wild-type mouse with CO₂ inhalation. Use tissue forceps and fine iris scissors to dissect out approximately 8 cm of ileum.
   2. Flush out using a syringe with gavage feeding needle with about 40 mL of ice-cold Dulbecco's phosphate-buffered saline (DPBS), then cut lengthwise with scissors and open the ileum.
   3. Cut the ileum into small (0.5−1.0 cm) pieces. Place the pieces in 5 mL of sterile ice-cold DPBS in a 15 mL conical tube, then rock for 5 min on ice.
   4. Use a pipette controller to aspirate the DPBS and replace it with 10 mL of cold buffer 1 (2 mM EDTA in DPBS). Rock for 30 min on ice.
   5. Use the pipette controller to aspirate buffer 1 and replace with 10 mL of cold buffer 2 (54.9 mM D-sorbitol, 43.4 mM sucrose in DPBS). Shake for 2−3 min by hand (~80 shakes/min).
   6. Take a 20 µL droplet of buffer 2 contents after shaking and inspect under a microscope.
   7. Filter buffer 2 contents with a 70 µm sterile cell strainer, then collect the filtered buffer with a 50 mL conical tube.
   8. Pipette 20 µL of filtrate onto the slide to count the crypts. Transfer a sufficient volume of buffer 2 from step 1.1.7 to ensure that there are ~500 crypts/well.
   9. Spin down at 150 x g for 10 min at 4 °C. Once spinning is finished, carefully aspirate the supernatant.
   10. Suspend crypts in 50 µL of basement membrane matrix (e.g., Matrigel) per 500 crypts, pipette up and down (being careful to avoid bubbles), then place a 50 µL droplet of basement membrane matrix/crypt mix in the center of one well in a 24 well plate. Incubate for 30 min at 37 °C to polymerize basement membrane matrix.
   11. After 30 min of polymerization, carefully add 600 µL of minigut media (advanced Dulbecco's modified Eagle medium [DMEM]/F12, 2 mM L-alanine-L-glutamine, pen/strep [100 units/mL], 10 mM Hepes, N2 supplement [1:100], B27 supplement [1:50] with epidermal growth factor [EGF; 50 ng/mL], Noggin [100 ng/mL], R-spondin [500 ng/mL], and Y27632 [10 µM]) to each well, then return the plate to the 37 °C incubator. Observe under a microscope each day, and change the media every 2−3 days.
2. Enteroid passaging
   NOTE: For long cultures, enteroids should be split approximately each week.
   1. To passage the enteroids, place the tissue culture plate on ice. Aspirate the media and add 1 mL of cold DPBS to each well. Use a P1000 tip to pipette up and down until no solid basement membrane matrix chunks remain.
   2. Pass up and down once through a 1 mL insulin syringe (27 G) and into a 15 mL conical tube. Spin down for 5 min at 150 x g at 4 °C.
   3. Use pipette to remove DPBS. Resuspend in 50 µL of basement membrane matrix/well.
   4. Place the plate in a 37 °C incubator for 30 min to allow basement membrane matrix to polymerize. Overlay each well with 600 µL of ENR media (minigut media, 50 ng/mL EGF, 100 ng/mL Noggin, 500 ng/mL R-spondin), then return the plate to the incubator.

2. Flow Cytometry Analysis of EdU-positive Cells in Enteroids

NOTE: Figure 1 shows the workflow for flow cytometry analysis of EdU-positive cells in enteroids.

1. Incubation of enteroids with EdU
   1. Grow enteroids from step 1.2.4 for 5–7 days. Passage enteroids into a new 24 well plate in a splitting ratio of 1:2. Add 600 µL of ENR medium to each well. Incubate enteroids for 4−5 days in a 37 °C incubator.
   2. Set the control group (untreated enteroids) and experimental group (enteroids treated with 5 ng/mL interleukin 22 [IL-22]). Prepare at least three replicates for each group.
   3. Add EdU to the ENR medium to prepare EdU medium with a concentration of 50 μM. Add 600 μL of EdU medium to each well and incubate for 2 h in a 37 °C incubator. Set one well of enteroids without EdU treatment as a negative control for background subtraction.
2. Harvesting of enteroids from basement membrane matrix
   1. Use a pipette controller to aspirate EdU medium and wash 1x with DPBS. Add 1 mL of DPBS.
   2. Use P1000 pipette tip and pipette up and down until no solid basement membrane matrix chunks remain. Transfer to a 15 mL tube and spin down at 300 x g for 5 min. Discard the supernatant.
   3. Add 500 μL of cell-dissociation enzymes (Table of Materials) and incubate for 15 min at 37 °C. Use P200 pipette tip and pipette up and down to break enteroids into single cells.
   4. Add 3 mL of DMEM medium containing 10% fetal bovine serum (FBS) and repeatedly pipette with a P1000 pipette tip.
   5. Spin down at 300 x g for 5 min and aspirate the supernatant medium. Resuspend the cells with 1 mL of DPBS.
3. Fixation and permeabilization of cells
   1. Transfer the cell suspension to a 1.5 mL tube, spin down at 300 x g for 5 min, and discard the supernatant.
   2. Resuspend cells with 1 mL of 4% paraformaldehyde (PFA), fix for 15 min at room temperature (RT), and spin down at 300 x g for 5 min. Aspirate the supernatant with a pipette tip, wash 1x with DPBS, and spin down to remove the supernatant.
   3. Resuspend cells with 1 mL of 0.5% nonionic surfactant. Incubate for 10 min at RT.
   4. Spin down at 300 x g for 5 min and aspirate the supernatant. Wash 1x with DPBS and spin down to remove the supernatant.
4. Detection of EdU
   1. Prepare stock solutions for each component in advance: 1) working solution of the Alexa Fluor azide, 2) working solution of 1x EdU reaction buffer, and 3) 10x stock solution of EdU buffer additive.
   2. Prepare 1x EdU buffer additive by diluting the 10x solution 1:10 in deionized water. Prepare this solution fresh.
   3. Prepare reaction cocktail according to Table 1.
      NOTE: Add the ingredients in the order listed in the table. Use the reaction cocktail within 15 min of preparation.
   4. Add 100 μL of reaction cocktails to each 1.5 mL tube. Resuspend the cells, protect from light, incubate for 30 min at RT.
   5. Centrifuge at 300 x g for 5 min and aspirate the reaction solution with pipette tip gently.
   6. Add 0.5% nonionic surfactant penetrant to each tube to wash 1x at RT. Centrifuge at 300 x g for 5 min, aspirate the supernatant with pipette tip gently, and resuspend the cells in 1 mL of DPBS.
5. Analysis of cells by flow cytometry
   1. Filter the resuspended cells with a 40 μm strainer, then collect the filtered cells with a 15 mL conical tube. Perform FACS on-machine detection as soon as possible.
      NOTE: If conditions are limited, the cell stained samples should be stored in the dark at 4 °C and flow-tested within 3 days.
   2. Select the appropriate channel (according to the type of Alexa Fluor azide in the EdU kit; here, red channel) and voltage (here, ~150–350 V) for flow cytometry analysis.
   3. Gating strategy
      1. Draw an FSC-A (x-axis) vs. SSC-A (y-axis) pseudocolor plot and distribute most of the cells to the visible range of the dot map by adjusting the voltage. Select the cell population (R1) and exclude the cell debris in the bottom left corner.
      2. From the R1 cell population, establish an FSC-A (x-axis) vs. FSC-H (y-axis) pseudocolor plot, and set the gate to select single cells (R2) to exclude cell clumps.
      3. From the R2 cell population, establish the fluorescence intensity (x-axis) vs. cell number (y-axis) plot, and use the negative control to set the gate. The region of the fluorescent signal is a positive cell region (R3). Compare the ratio of EdU-positive cells (R3) between the experimental and control groups.

3. Flow Cytometry Analysis of PI-positive Cells in Enteroids

NOTE: Figure 2 shows the workflow for flow cytometry analysis of PI-positive cells in enteroids.

1. Incubation of enteroid cells with PI
   1. Grow enteroids from step 1.2.4 for 5–7 days. Passage enteroids into a new 24 well plate in a splitting ratio of 1:2. Add 600 µL of ENR medium to each well. Incubate enteroids for 4−5 days in a 37 °C incubator.
   2. Set the control group (untreated) and experimental group (IL-22 treated), using at least three replicates for each group.
   3. Add PI to the ENR medium to prepare PI medium with a concentration of 3 μM.
   4. Add 600 μL of PI medium to each well and incubate for 30 min in a 37 °C incubator. Set one well of enteroids without PI treatment as a negative control for background subtraction.
2. Harvest enteroids from basement membrane matrix following steps 2.2.1−2.2.5.
3. Analysis of cells by flow cytometry
   1. Filter the resuspended cells with a 40 μm strainer and collect the filtered cells with a 15 mL conical tube.
   2. Perform FACS on-machine detection as soon as possible.
      NOTE: If conditions are limited, the cell stained samples should be stored in the dark at 4 °C and flow-tested within 3 days.
   3. Select the appropriate channel (here, red channel) and voltage (here, ~150–350 V) for flow cytometry analysis.
   4. Use the same gating strategy as described in section 2.5.3.

Results

Small intestinal crypts were isolated and cultured as enteroids in basement membrane matrix. Enteroids started to form buds 2 days after isolation. On day 6, enteroids had many buds with lots of debris (dead cells) in the lumen. Enteroids were ready to be passaged at this stage (Figure 3).

Numerous studies have shown that inflammatory cytokines are essential for the maintenance of intestinal epithelial homeostasis. Abnormal expression of inflammatory cytokines is ...

Discussion

This protocol details the steps necessary for the culture of enteroids in vitro and quantification of EdU- and PI-positive cells in the enteroids by flow cytometry. There are several advantages of this strategy. First, EdU labelling is used to detect proliferating cells in enteroids. Compared with traditional BrdU assay, EdU labelling method is faster, more sensitive, and more accurate. EdU is very similar to thymine (T), which replaces thymine in DNA synthesis during cell division. Compared to the BrdU antibody, EdU is ...

Materials

Name	Company	Catalog Number	Comments
15 ml centrifuge tube	Corning	430791
22 G gavage needle	VWR	20068-608
24-well plate	Nunc	142475
40 mm sterile cell strainer	BD	352340
50 ml centrifuge tube	Corning	430829
70 mm sterile cell strainer	BD	352350
Advanced DMEM/F-12	GIBCO	12634010
Attune NxT Acoustic Focusing Cytometer	Invitrogen	A24863
B-27 Supplement	GIBCO	17504044
Buffer 1			2 mM EDTA in DPBS
Buffer 2			54.9 mM D-sorbitol, 43.4 mM sucrose in DPBS
C57/B6 mice	Nanjing Biomedical Research Institute of Nanjing University
Cell-dissociation enzymes (TrypLE)	Life technologies	12605-010
Centrifuge	Eppendorf	5424
Centrifuge	Eppendorf	5424R
Centrifuge	Eppendorf	5810R
Click-iT Plus EdU Alexa Fluor 594 Imaging Kit	Life technologies	C10639
CO2 incubator	Panasonic	MCO-18AC
DPBS	GIBCO	14190144
D-sorbitol	BBI	SB0491
EDTA	BBI	EB0185
ENR media			Minigut media, 50 ng/ml EGF, 100 ng/ml Noggin, 500 ng/ml R-spondin
Fetal Bovine Serum (FBS)	Gibco	10270-106
Fine Iris Scissors	Tansoole	2037454
Fluorescence microscope	Olympus	FV1000
GlutaMAX Supplement	GIBCO	35050-061
Goat Serum	Life technologies	16210-064
HDMEM	Hyclone	SH30243.01B
HEPES	Sigma	H4034
Matrigel	Corning	356231
Minigut media			Advanced DMEM/F12, 2 mM Glutamax, Penn/Strep (100 units/ml), 10 mM Hepes, N2 supplement (1:100), B27 supplement (1:50)
N2 supplement	R&D	AR009
Nonionic surfactant (Triton X)	BBI	TB0198-500ML
Operating Scissor (12.5 cm)	Tansoole	2025785
Paraformaldehyde (PFA)	sigma	158127-500g
Penn/Strep	Invitrogen	15140-148
Phase contrast microscope	Nikon	TS1000
Propidium iodide	Sigma	P4170-25MG
Recombinant EGF	PeproTech	315-09
Recombinant Mouse Noggin	PeproTech	250-38
Recombinant Mouse R-Spondin 1	R&D	3474-RS-050
Recombinant Murine IL-22	PeproTech	210-22-10
Sucrose	BBI	SB0498
Tissue Forceps	Tansoole	2026704
Y-27632 2HC1	Selleck	S1049