preparation-hydroxy-paam-hydrogels-for-decoupling-effects

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

It is now well established that many cellular functions are regulated by interactions of cells with physicochemical and mechanical cues of their ...

Université de Mons

This article describes a simple and low-tech microfluidic method for single-cell experimentation, which permits cell selection without stress, cell manipulation with fine control, and passive self-exclusion of all undesired super-micronic particles. The method requires only conventional soft lithography microfabrication techniques and is applicable to any microfluidic single-cell circuitry. The principle relies on a bypass plugged in parallel with a single-cell assay device and collecting 97% of the flow rate. Cell selection into the single cell device is performed by moving the cell of interest back and forth in the vicinity of the junction between the bypass and the analysis circuitry. Cell navigation is finely controlled by hydrostatic pressure via centimetre-scale actuation of external macroscopic reservoirs connected to the device. We provide successful examples of biomechanical and biochemical assays on living human leukocytes passing through 4 mum wide capillaries. The blebbing process dynamics are monitored by conventional 24 fps videomicroscopy and subcellular cytoskeleton organization is imaged by on-chip immunostaining.

A simple microfluidic method to select, isolate, and manipulate single-cells in mechanical and biochemical assays.

Growing evidence suggests that cytoplasmic actin filaments are essential factors in the modulation of nuclear shape and function. However, the mechanistic understanding of the internal orchestration between cell and nuclear shape is still lacking. Here we show that orientation and deformation of the nucleus are regulated by lateral compressive forces driven by tension in central actomyosin fibres. By using a combination of micro-manipulation tools, our study reveals that tension in central stress fibres is gradually generated by anisotropic force contraction dipoles, which expand as the cell elongates and spreads. Our findings indicate that large-scale cell shape changes induce a drastic condensation of chromatin and dramatically affect cell proliferation. On the basis of these findings, we propose a simple mechanical model that quantitatively accounts for our experimental data and provides a conceptual framework for the mechanistic coordination between cell and nuclear shape.

Spatial coordination between cell and nuclear shape within micropatterned endothelial cells.

Physico-chemical and biochemical factors in the local cellular microenvironment are known to impact on multiple aspects of cell behaviour through specific signal pathways. These mechanotransduction cues can couple each other to regulate cell fate, and it remains unclear whether mechanotransduction in different contexts shares common mechanisms. Undoubtedly, a challenge will involve the further characterization of such cooperative mechanisms, as well as clearly defining the individual role of each mechanical and biochemical parameter. To control these mechanotransduction cues in an independent manner, we developed a simple and efficient strategy to immobilize any desired nature of proteins on polyacrylamide hydrogels and independently control various parameters of the cell microenvironment, such as matrix stiffness, cell-binding ligand density and confined adhesiveness. This novel platform is validated by conducting single-cell experiments and opens a broad avenue for studying complex interplays involved in mechanotransduction with a facile and versatile approach.

A simple route to functionalize polyacrylamide hydrogels for the independent tuning of mechanotransduction cues.

This protocol describes a simple method to deposit protein micropatterns over a wide range of culture substrate stiffness (three orders of magnitude) by using two complementary polymeric substrates. In the first part, we introduce a novel polyacrylamide hydrogel, called hydroxy-polyacrylamide (PAAm), that permits to surmount the intrinsically nonadhesive properties of polyacrylamide with minimal requirements in cost or expertize. We present a protocol for tuning easily the rigidity of "soft" hydroxy-PAAm hydrogels between ~0.5 and 50 kPa and a micropatterning method to locally deposit protein micropatterns on these hydrogels. In a second part, we describe a protocol for tuning the rigidity of "stiff" silicone elastomers between ~100 and 1000 kPa and printing efficiently proteins from the extracellular matrix. Finally, we investigate the effect of the matrix rigidity on the nucleus of primary endothelial cells by tuning the rigidity of both polymeric substrates. We envision that the complementarity of these two polymeric substrates, combined with an efficient microprinting technique, can be further developed in the future as a powerful mechanobiology platform to investigate in vitro the effect of mechanotransduction cues on cellular functions, gene expression, and stem cell differentiation.

Marie Versaevel

Laboratoire Interfaces et Fluides Complexes

Université de Mons

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

Marie Versaevel

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Laboratoire Interfaces et Fluides Complexes

Université de Mons

Preparation of Hydroxy-PAAm Hydrogels for Decoupling the Effects of Mechanotransduction Cues

Laboratoire Interfaces et Fluides Complexes