fabrication-inverted-colloidal-crystal-polyethylene-glycol-scaffold

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

The ability to maintain hepatocyte function in vitro, for the purpose of testing xenobiotics&#39; cytotoxicity, studying virus infection and developing ...

Nanyang Technological University

A homogeneous electrochemical immunoassay is based on the interaction of osmium-antigen conjugate with its antibody. The novelty presented herein is the direct conjugation of the osmium complex to a small antigen and the application of the quantitative analysis of the antigen and its antibody as the electrical signal for homogeneous immunoassay. The small antigen chosen is hippuric acid (HA), a major urinary metabolite in toluene-exposed humans. As a redox mediator, [Os(4,4'-dimethoxy-2,2'-bipyridine)2(4-aminomethylpyridine-HA)Cl](+/2+) (Os-HA antigen) has been synthesized and characterized on screen-printed carbon electrodes. The synthesized Os-HA antigen shows reversible redox peaks at E(½)=0.056 V versus Ag/AgCl. The homogeneous competitive immunoassay relies on the interaction between Os-HA antigen conjugate and free antigen to its antibody, which can generate electrical signals linearly proportional to the free antigen monitored by cyclic voltammetry and differential pulse voltammetry in the range of 10 μg mL(-1) to 5.12 mg mL(-1). The cutoff concentration of HA in urine samples is 2.0 mg mL(-1), so the method can be used to develop a HA immunosensor. Moreover, the proposed homogeneous electrochemical immunoassay method can be applied to detect low concentrations of small antigens found in the healthcare area.

Homogeneous electrochemical detection of hippuric acid in urine based on the osmium-antigen conjugate.

Electrical stimulation is a very important biophysical cue for skeletal muscle maintenance and myotube formation. The absence of electrical signals from motor neurons causes denervated muscles to atrophy. Herein, we investigate for the first time the utility of an enzymatic biofuel cell (EBFC) as a promising means for mimicking native electrical stimulation. EBFC was set up using two different enzymes: one was glucose oxidase (GOX) used for the generation of anodic current followed by the oxidation of glucose; the other was Bilirubin oxidase (BOD) for the generation of cathodic current followed by the reduction of oxygen. We studied the behaviors of muscle precursor cells (MPCs) in terms of proliferation, migration and differentiation under different electrical conditions. The EBFC electrical stimulations significantly increased cell proliferation and migration. Furthermore, the electrical stimulations promoted the differentiation of cells into myotube formation based on expressions at the gene and protein levels. The EBFC set up, with its free forms adjustable to any implant design, was subsequently applied to the nanofiber scaffolding system. The MPCs were demonstrated to be stimulated in a similar manner as the 2D culture conditions, suggesting potential applications of the EBFC system for muscle repair and regeneration.

Electrical stimulation by enzymatic biofuel cell to promote proliferation, migration and differentiation of muscle precursor cells.

Disposable screen-printed nickel/carbon composites on indium tin oxide (ITO) electrodes (DSPNCE) were developed for the detection of glucose without enzymes. The DSPNCE were prepared by screen-printing the ITO substrate with a 50 wt% nickel/carbon composite, followed by curing at 400 °C for 30 min. The redox couple of Ni(OH)₂/NiOOH was deposited on the surface of the electrodes via cyclic voltammetry (CV), scanning from 0-1.5 V for 30 cycles in 0.1 M NaOH solution. The DSPNCE were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical methods. The resulting electrical currents, measured by CV and chronoamperometry at 0.65 V vs. Ag/AgCl, showed a good linear response with glucose concentrations from 1.0-10 mM. Also, the prepared electrodes showed no interference from common physiologic interferents such as uric acid (UA) or ascorbic acid (AA). Therefore, this approach allowed the development of a simple, disposable glucose biosensor.

Won-Yong Jeon

School of Materials Science and Engineering

Nanyang Technological University

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

Won-Yong Jeon

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}School of Materials Science and Engineering

Nanyang Technological University

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

School of Materials Science and Engineering