Crystallization of Proteins on Chip by Microdialysis for <i>In Situ</i> X-ray Diffraction Studies

This protocol describes the manufacturing of reproducible and inexpensive microfluidic devices covering the whole pipeline for crystallizing proteins ...

Optimization of Crystal Growth for Neutron Macromolecular Crystallography

The use of neutron macromolecular crystallography (NMX) is expanding rapidly with most structures determined in the last decade thanks to new NMX ...

Université Grenoble Alpes, CEA, CNRS, IBS

ELVESYS SAS

Université Grenoble Alpes

Many instrumentation developments in crystallization have concentrated on massive parallelization assays and reduction of sample volume per experiment to find initial crystallization conditions. Yet improving the size and diffraction quality of the crystals for diffraction studies often requires decoupling of crystal nucleation and growth. This in turn requires the control of variables such as precipitant and protein concentration, equilibration rate, and temperature, which are all difficult parameters to control in the existing setups. The success of the temperature-controlled batch method, originally developed to grow very large crystals for neutron crystallography, demonstrated that the rational optimization of crystal growth has potential in structural biology. A temperature-controlled dialysis button has been developed for our previous device, and a prototype of an integrated apparatus for the rational optimization of crystal growth by mapping and manipulating temperature-precipitant concentration phase diagrams has been constructed. The presented approach differs from the current paradigm, since it involves serial instead of parallel experiments, exploring multiple crystallization conditions with the same protein sample. The sample is not consumed in the experiment and the conditions can be changed in a reversible fashion, using dialysis with a flowing precipitant reservoir as well as precise temperature control. The control software allows visualization of the crystals, as well as control of the temperature and composition of the crystallization solution. The rational crystallization optimization strategies presented here allow tailoring of crystal size, morphology and diffraction quality, significantly reducing the time, effort and amount of expensive protein material required for structure determination.

A crystallization apparatus for temperature-controlled flow-cell dialysis with real-time visualization.

This paper reports a versatile microfluidic chip developed for on-chip crystallization of proteins through the dialysis method and in situ X-ray diffraction experiments. A microfabrication process enabling the integration of regenerated cellulose dialysis membranes between two layers of the microchip is thoroughly described. We also describe a rational approach for optimizing on-chip protein crystallization via chemical composition and temperature control, allowing the crystal size, number and quality to be tailored. Combining optically transparent microfluidics and dialysis provides both precise control over the experiment and reversible exploration of the crystallization conditions. In addition, the materials composing the microfluidic chip were tested for their transparency to X-rays in order to assess their compatibility for in situ diffraction data collection. Background scattering was evaluated using a synchrotron X-ray source and the background noise generated by our microfluidic device was compared to that produced by commercial crystallization plates used for diffraction experiments at room temperature. Once crystals of 3 model proteins (lysozyme, IspE, and insulin) were grown on-chip, the microchip was mounted onto the beamline and partial diffraction data sets were collected in situ from several isomorphous crystals and were merged to a complete data set for structure determination. We therefore propose a robust and inexpensive way to fabricate microchips that cover the whole pipeline from crystal growth to the beam and does not require any handling of the protein crystals prior to the diffraction experiment, allowing the collection of crystallographic data at room temperature for solving the three-dimensional structure of the proteins under study. The results presented here allow serial crystallography experiments on synchrotrons and X-ray lasers under dynamically controllable sample conditions to be observed using the developed microchips.

Niels Junius

Université Grenoble Alpes, CEA, CNRS, IBS

Crystallization of Proteins on Chip by Microdialysis for In Situ X-ray Diffraction Studies

Optimization of Crystal Growth for Neutron Macromolecular Crystallography