cortical-bone-assessment-using-ultrasonic-guided-waves

Cortical Bone Assessment Using Ultrasonic Guided Waves: A Reproducibility Study in a Healthy Population

Fragility fractures are still a worldwide health burden in the context of population aging. In particular, the global number of hip fractures is expected ...

Universidad de Valparaíso

The aim of this study was to estimate cortical porosity (Ct.Po) and cortical thickness (Ct.Th) using 500-kHz bi-directional axial transmission (AT). Ct.Th and Ct.Po were obtained at the tibia in 15 patients from a 2-D transverse isotropic free plate model fitted to measured guided wave dispersion curves. The velocities of the first arriving signal (υ) and A mode (υ) were also determined. Site-matched peripheral quantitative computed tomography (pQCT) provided volumetric cortical bone mineral density (Ct.vBMD) and Ct.Th. Good agreement was found between Ct.Th and Ct.Th (R = 0.62, root mean square error [RMSE] = 0.39 mm). Ct.vBMD correlated with Ct.Po (R = 0.57), υ (R = 0.43) and υ (R = 0.28). Furthermore, a significant correlation was found between AT and distal high-resolution pQCT. The measurement ofcortical parameters at the tibia using guided waves might improve the prediction of bone fractures in a cost-effective and radiation-free manner.

In Vivo Measurements of Cortical Thickness and Porosity at the Proximal Third of the Tibia Using Guided Waves: Comparison with Site-Matched Peripheral Quantitative Computed Tomography and Distal High-Resolution Peripheral Quantitative Computed Tomography.

The estimation of cortical thickness (Ct.Th) and porosity (Ct.Po) at the tibia using axial transmission ultrasound was successfully validated ex vivo against site-matched micro-computed tomography. The assessment of cortical parameters based on full-spectrum guided-wave analysis might improve the prediction of bone fractures in a cost-effective and radiation-free manner.

Ex vivo cortical porosity and thickness predictions at the tibia using full-spectrum ultrasonic guided-wave analysis.

Automatic fall detection is a very active research area, which has grown explosively since the 2010s, especially focused on elderly care. Rapid detection of falls favors early awareness from the injured person, reducing a series of negative consequences in the health of the elderly. Currently, there are several fall detection systems (FDSs), mostly based on predictive and machine-learning approaches. These algorithms are based on different data sources, such as wearable devices, ambient-based sensors, or vision/camera-based approaches. While wearable devices like inertial measurement units (IMUs) and smartphones entail a dependence on their use, most image-based devices like Kinect sensors generate video recordings, which may affect the privacy of the user. Regardless of the device used, most of these FDSs have been tested only in controlled laboratory environments, and there are still no mass commercial FDS. The latter is partly due to the impossibility of counting, for ethical reasons, with datasets generated by falls of real older adults. All public datasets generated in laboratory are performed by young people, without considering the differences in acceleration and falling features of older adults. Given the above, this article presents the eHomeSeniors dataset, a new public dataset which is innovative in at least three aspects: first, it collects data from two different privacy-friendly infrared thermal sensors; second, it is constructed by two types of volunteers: normal young people (as usual) and performing artists, with the latter group assisted by a physiotherapist to emulate the real fall conditions of older adults; and third, the types of falls selected are the result of a thorough literature review.

eHomeSeniors Dataset: An Infrared Thermal Sensor Dataset for Automatic Fall Detection Research.

Quantitative ultrasound (QUS) methods have been introduced to assess cortical bone health at the radius and tibia through the assessment of cortical thickness (Ct.Th), cortical porosity and bulk wave velocities. Ultrasonic attenuation is another QUS parameter which is not currently used. We assessed the feasibility ofmeasurement of ultrasonic attenuation in cortical bone with a broadband transducer with 3.5 MHz center frequency. Echoes from the periosteal and endosteal interfaces were fitted with Gaussian pulses using sparse signal processing. Then, the slope of the broadband ultrasonic attenuation (Ct.nBUA) in cortical bone and quality factorQ11-1were calculated with a parametric approach based on the center-frequency shift. Five human subjects were measured at the one-third distal radius with pulse-echo ultrasound, and reference data was obtained with high-resolution x-ray peripheral computed tomography (Ct.Th and cortical volumetric bone mineral density (Ct.vBMD)). Ct.Th was used in the calculation of Ct.nBUA whileQ11-1is obtained solely from ultrasound data. The values of Ct.nBUA (6.7 ± 2.2 dB MHz.cm) andQ11-1(8.6 ± 3.1%) were consistent with the literature data and were correlated to Ct.vBMD (R2=0.92,p<0.01, RMSE = 0.56 dB.MHz.cm, andR2=0.93,p<0.01, RMSE = 0.76%). This preliminary study suggests that the attenuation of an ultrasound signal propagating in cortical bone can be measuredat the one-third distal radius and that it provides an information on bone quality as attenuation values were correlated to Ct.vBMD. It remains to ascertain that Ct.nBUA andQ11-1measured here exactly reflect the true (intrinsic) ultrasonic attenuation in cortical bone. Measurement of attenuation may be considered useful for assessing bone health combined with the measurement of Ct.Th, porosity and bulk wave velocities in multimodal cortical bone QUS methods.

pulse-echo measurement of apparent broadband attenuation andfactor in cortical bone: a preliminary study.

Cortical bone is a complex multiscale medium and its study is of importance for clinical fracture prevention. In particular, cortical attenuation is known to be linked with shock energy absorption and ability to resist fracture. However, the links between cortical bone absorption and its multiscale structure are still not well understood. This work is about the use of homogenized tensors in order to characterize the viscoelastic behavior of cortical bone at ultrasonic frequencies, i.e., about 0.1 to 10 MHz. Such tensors are derived from the cell problem via two-scale homogenization theory for linear elastic and Kelvin-Voigt viscoelastic descriptions. The elliptic formulations obtained from the cell problems are implemented within the range of medically-observed porosities. Microstructure is assessed considering cubic cells with cylindrical inclusion and transverse isotropic assumption. A simplified model, adding one temporal parameter τ per phase, allows a good agreement with experimental data. The corresponding attenuation is proportional to the square of the frequency, in agreement with Kramer-Kronig relations. This development is proposed in the context of robust clinical inverse problem approaches using a restricted number of parameter. Two main properties for the material filling the pores are adjusted and discussed: absorption and shear contribution. Best agreement with experimental data is observed for material inside the pores being solid and highly attenuating.

A simplified homogenization model applied to viscoelastic behavior of cortical bone at ultrasonic frequencies.

The population is aging worldwide, creating new challenges to the quality of life of older adults and their families. Falls are an increasing, but not inevitable, threat to older adults. Information technologies provide several solutions to address falls, but smart homes and the most available solutions require expensive and invasive infrastructures. In this study, we propose a novel approach to classify and detect falls of older adults in their homes through low-resolution infrared sensors that are affordable, non-intrusive, do not disturb privacy, and are more acceptable to older adults. Using data collected between 2019 and 2020 with the eHomeseniors platform, we determine activity scores of older adults moving across two rooms in a house and represent an older adult fall through skeletonization. We find that our twofold approach effectively detects activity patterns and precisely identifies falls. Our study provides insights to physicians about the daily activities of their older adults and could potentially help them make decisions in case of abnormal behavior.

Using Low-Resolution Non-Invasive Infrared Sensors to Classify Activities and Falls in Older Adults.

The bone quality of patients undergoing hip replacement surgery is poorly predicted by radiographs alone. With better bone quality information available to a surgeon, the operation can be performed more safely. The aim of this study was to investigate whether ultrasound signals of cortical bone at peripheral sites such as the tibia and radius can be used to predict the compressive mechanical properties of cortical bone at the femoral neck. We recruited 19 patients undergoing elective hip arthroplasty and assessed the radius and tibia of these patients with the Azalée guided wave ultrasound to estimate the porosity and thickness of the cortex. Excess bone tissues were collected from the femoral neck and the compressive mechanical properties of the cortex were characterised under a mechanical loading rig to determine stiffness, ultimate strength, and density. The correlations between the ultrasound measurements and mechanical properties were analysed using linear regression, Pearson correlation statistics, and multiple regression analysis. Cortical mechanical properties were weakly to moderately correlated with the ultrasound measurements at various sites (R = 0.00-0.36). The significant correlations found were not consistent across all 4 peripheral measurement sites. Additionally, weak to moderate ability of the ultrasound to predict mechanical properties at the neck of femur with multiple regression analysis was found (R = 0.00-0.48). Again, this was inconsistent across the different anatomical sites. Overall, the results demonstrate the need for ultrasound scans to be collected directly from clinically relevant sites such as the femoral neck due to the inconsistency of mechanical properties across various sites.

Can guided wave ultrasound predict bone mechanical properties at the femoral neck in patients undergoing hip arthroplasty?

Accurate measurement of cortical bone parameters may improve fracture risk assessment and help clinicians on the best treatment strategy. Patients at risk of fracture are currently detected using the current X-Ray gold standard DXA (Dual XRay Absorptiometry). Different alternatives, such as 3D X-Rays, Magnetic Resonance Imaging or Quantitative Ultrasound (QUS) devices, have been proposed, the latter having advantages of being portable and sensitive to mechanical and geometrical properties. The objective of this cross-sectional study was to evaluate the performance of a Bi-Directional Axial Transmission (BDAT) device used by trained operators in a clinical environment with older subjects. The device, positioned at one-third distal radius, provides two velocities: VFAS (first arriving signal) and VA0 (first anti-symmetrical guided mode). Moreover, two parameters are obtained from an inverse approach: Ct.Th (cortical thickness) and Ct.Po (cortical porosity), along with their ratio Ct.Po/Ct.Th. The areal bone mineral density (aBMD) was obtained using DXA at the femur and spine. One hundred and six patients (81 women, 25 men) from Marien Hospital and St. Anna Hospital (Herne, Germany) were included in this study. Age ranged from 41 to 95 years, while body mass index (BMI) ranged from 16 to 47 kg.m-2. Three groups were considered: 79 non-fractured patients (NF, 75±13years), 27 with non-traumatic fractures (F, 80±9years) including 14 patients with non-vertebral fractures (NVF, 84±7years). Weak to moderate significant Spearman correlations (R ranging from 0.23 to 0.53, p < 0.05) were found between ultrasound parameters and age, BMI. Using multivariate Partial Least Square discrimination analyses with Leave-One-Out Cross-Validation (PLS-LOOCV), we found the combination of VFAS and the ratio Ct.Po/Ct.Th to be predictive for all non traumatic fractures (F) with the odds ratio (OR) equals to 2.5 [1.6-3.4] and the area under the ROC curve (AUC) equal to 0.63 [0.62-0.65]. For the group NVF, combination of four parameters VA0. Ct.Th, Ct.Po and Ct.Po/Ct.Po, along with age provides a discrimination model with OR and AUC equals to 7.5 [6.0-9.1] and 0.75 [0.73-0.76]. When restricted to a smaller population (87 patients) common to both BDAT and DXA, BDAT ORs and AUCs are comparable or slightly higher to values obtained with DXA. The fracture risk assessment by BDAT method in older patients, in a clinical setting, suggests the benefit of the affordable and transportable device for the routine use.

Bi-Directional Axial Transmission measurements applied in a clinical environment.

The immunohistochemical (IHC) evaluation of epidermal growth factor 2 (HER2) for the diagnosis of breast cancer is still qualitative with a high degree of inter-observer variability, and thus requires the incorporation of complementary techniques such as fluorescent  hybridization (FISH) to resolve the diagnosis. Implementing automatic algorithms to classify IHC biomarkers is crucial for typifying the tumor and deciding on therapy for each patient with better performance. The present study aims to demonstrate that, using an explainable Machine Learning (ML) model for the classification of HER2 photomicrographs, it is possible to determine criteria to improve the value of IHC analysis. We trained a logistic regression-based supervised ML model with 393 IHC microscopy images from 131 patients, to discriminate between upregulated and normal expression of the HER2 protein. Pathologists' diagnoses (IHC only) vs. the final diagnosis complemented with FISH (IHC + FISH) were used as training outputs. Basic performance metrics and receiver operating characteristic curve analysis were used together with an explainability algorithm based on Shapley Additive exPlanations (SHAP) values to understand training differences. The model could discriminate amplified IHC from normal expression with better performance when the training output was the IHC + FISH final diagnosis (IHC vs. IHC + FISH: area under the curve, 0.94 vs. 0.81). This may be explained by the increased analytical impact of the membrane distribution criteria over the global intensity of the signal, according to SHAP value interpretation. The classification model improved its performance when the training input was the final diagnosis, downplaying the weighting of the intensity of the IHC signal, suggesting that to improve pathological diagnosis before FISH consultation, it is necessary to emphasize subcellular patterns of staining.

HER2 classification in breast cancer cells: A new explainable machine learning application for immunohistochemistry.

Current Challenges in Ultrasound Imaging of Cortical Bone Thickness.

The linear functional analysis, historically founded by Fourier and Legendre (Fourier's supervisor), has provided an original vision of the mathematical transformations between functional vector spaces. Fourier, and later Laplace and Wavelet transforms, respectively defined using the simple and damped pendulum, have been successfully applied in numerous applications in Physics and engineering problems. However the classical pendulum basis may not be the most appropriate in several problems, such as biological ones, where the modelling approach is not linked to the pendulum. Efficient functional transforms can be proposed by analysing the links between the physical or biological problem and the orthogonal (or not) basis used to express a linear combination of elementary functions approximating the observed signals. In this study, an extension of the Fourier point of view called Dynalet transform, is described. The approach provides robust approximated results in the case of relaxation signals of periodic biphasic organs in human physiology.

Jean-Gabriel Minonzio

Escuela de Ingeniería en Informática,
Center of Interdisciplinary Biomedical and Engineering Research for Health - MEDING,
Escuela de Ingeniería en Informática, Center of Interdisciplinary Biomedical and Engineering Research for Health - MEDING

Universidad de Valparaíso

Cortical Bone Assessment Using Ultrasonic Guided Waves: A Reproducibility Study in a Healthy Population