micro-drive system assembly and electrode array implantation for multichannel recording in mice

Farelerin Motor Korteksinde Hücre Dışı Elektrofizyolojik Kayıt

The local field potential (LFP), an important component of extracellular signals, reflects the synaptic activity of large populations of neurons, which form the neural code for multiple behaviors1. Spikes generated by neuronal activity are considered to contribute to the LFP and are important for neural coding2. Alterations in spikes and LFPs have been proven to mediate several brain diseases, such as Alzheimer&#39;s disease, as well as emotions such as fear, etc.3,4. It is worth noting that many studies have highlighted that spike activity significantly differs between awake and anesthetized states in animals5. Although recordings in anesthetized animals offer an opportunity to assess LFPs with minimal artifacts in highly defined cortical synchronization states, the results differ to some extent from what can be found in awake subjects6,7,8. Thus, it is more meaningful to detect neural activity over long time scales and large spatial scales in various diseases in an awake brain state using electrodes implanted in the brain. This manuscript provides information for beginners on how to make the micro-drive system and set the parameters using common software for computing the spike and LFP signals in a fast and straightforward way in order to get the recording and analysis started.
Although the non-invasive recording of brain functions, such as by using electroencephalograms (EEGs) and event-related potentials (ERPs) recorded from the scalp, has been used extensively in human and rodent studies, EEG and ERP data have low spatial and temporal properties and, thus, cannot detect the precise signals produced by nearby dendritic synaptic activity within a specific brain area1. Currently, by taking advantage of multichannel recording in conscious animals, neural activity in the deeper layers of the brain can be recorded chronically and progressively by implanting a micro-drive system into the brains of primates or rodents during multiple behavioral tests1,2,3,4,5,6,7,8,9. Briefly, researchers can construct a micro-drive system that can be used for the independent positioning of the electrodes or tetrodes to target different parts of the brain10,11. For example, Chang et al. described techniques to record spikes and LFPs in mice by assembling a light and compact micro-drive12. In addition, micro-machined silicon probes with custom-made accessory components are commercially available for recording multiple single neurons and LFPs in rodents during behavioral tasks13. Although various designs have been used for assembling micro-drive systems, these still have limited success in terms of the complexity and weight of the whole micro-drive system. For example, Lansink et al. showed a multichannel micro-drive system with a complex structure for recording from a single brain region14. Sato et al. reported a multichannel micro-drive system displaying an automatic hydraulic positioning function15. The main disadvantages of these micro-drive systems are that they are too heavy for mice to move freely and are difficult to assemble for beginners. Although multichannel extracellular recording has been shown to be a suitable and efficient technology for measuring neural activity during behavioral tests, it is not easy for beginners to record and analyze the signals acquired by the complex micro-drive system. Given that it is difficult to get the entire operation process of the multichannel extracellular recording and data analysis started in freely moving mice16,17, this present article presents simplified guidelines to introduce the detailed process of making the micro-drive system using commonly available components and settings; the parameters in the common software for computing the spike and LFP signals in a fast and straightforward way are also provided. Additionally, in this protocol, the mouse can move freely due to the use of a helium balloon, which contributes to offsetting the weight of headstage and micro-drive system. Generally, in the present study, we describe how to easily build a micro-drive system and optimize the processes of recording and data analysis.

Yazar Spotlight: Serbestçe Hareket Eden Farelerde Nöronal Aktiviteyi İncelemek için Çok Kanallı Hücre Dışı Kayıttaki Gelişmeler 

Serbestçe hareket eden farelerde çok kanallı hücre dışı kayıt

We aim to uncover the properties of neuronal firing and network local field potentials in behaving mice carrying out specific tasks by correlating the electrophysiological signal with behaviors. Multichannel extracellular recording by the micro-drive system has been shown to be a suitable and a efficient technology for neural activity during behavioral tests. Multichannel recording in free-moving mice has been deemed to be a useful technology in neuroscience studies, but it's still quite challenging for beginners to acquire and analyze the signals.We introduced how to perform the multichannel extracellular recording in freely-moving mice with a more steady and lightweight micro-drive system, and optimize the processes of recording and data analysis for the beginners. We are going to increase the number of channels and reduce the volume of micro-driver system in a new version.

Watch this Scientific Journal Video about Micro-Drive System Assembly and Electrode Array Implantation for Multichannel Recording in Mice at JoVE.com

Micro-Drive System Assembly and Electrode Array Implantation for Multichannel Recording in Mice  

Farelerde Çok Kanallı Kayıt için Mikro Sürücü Sistemi Montajı ve Elektrot Dizisi İmplantasyonu

Microdrive sistemini monte ederek başlayın. İki stull ve hareketli Microdrive'ı tutan bir vida kullanarak bilgisayar tasarımlı iki kartı bağlayın ve konektörü bir karta takın. Microdrive'ın motor korteksinin veya MC bölgesinin her iki tarafı için sekiz kılavuz tüpten oluşan iki set taşıyabildiğinden emin olun.Kılavuz boruları aynı uzunlukta kesin. Her biri yaklaşık beş santimetre uzunluğunda ve 35 mikrometre çapında 16 nikrom tel kesin. Kabloları kılavuz borulara yükleyin ve sabitlemek için yapıştırıcı uygulayın.Kablo yalıtımını sıyırın ve açıkta kalan her bir kabloyu, kanal haritasını ve referans ve toprak elektrotlarını takip ederek konektörden her bir pime sicimin, ardından iletken boyayı her bir pimin üzerine yavaşça kaplayın. Pimleri epoksi reçine kullanarak örtün, ardından elektrot uçlarının empedansını yaklaşık 350 kiloohm'a düşürmek için bir empedans test cihazı aracılığıyla altın kaplama yapın. Elektrot dizisi implantasyonu için, anestezi uygulanmış fareyi stereotaksik bir aparata sabitleyin ve rektal sıcaklığını 37 santigrat derecede tutmak için bir sıcaklık kontrolörü kullanın.Ardından kafatasını ortaya çıkarmak için küçük bir orta hat kesisi yapın. Kalan dokuyu makas kullanarak çıkarın ve kafatasını steril tuzlu suya batırılmış pamuklu çubuklarla temizleyin. Mürekkeple doldurulmuş bir cam mikroelektrot kullanarak, implantasyon için bilateral MC'nin istenen yerlerini işaretleyin.Daha sonra, bir kafatası matkabı kullanarak, MC bölgelerinde koordineli kafatasının hem sol hem de sağ tarafında iki küçük delik açın. Dura mater'i ince forseps ile deliklerden nazikçe çıkarın. Ardından, saniyede 10 mikrometre hızında bir mikromanipülatör kullanarak Microdrive sistemini deliklerin ortasına yerleştirin.Yerleştirmeyi bitirdikten sonra, vazelini diş çimentosu duvarlarına doldurun ve Microdrive sisteminin alt plakasını ve diş çimentosu duvarlarını karışık diş çimentosu ile birleştirin.

micro-drive-system-assembly-electrode-array-implantation-for

Research

JoVE Journal

Neuroscience

Micro-Drive System Assembly and Electrode Array Implantation for Multichannel Recording in Mice

299 Görüntüleme.  South China Normal University. Microdrive sistemini monte ederek başlayın. İki stull ve hareketli Microdrive'ı tutan bir vida kullanarak bilgisayar tasarımlı iki kartı bağlayın ve konektörü bir karta takın. Microdrive'ın motor korteksinin veya MC bölgesinin her iki tarafı için sekiz kılavuz tüpten oluşan iki set taşıyabildiğinden emin olun.Kılavuz boruları aynı uzunlukta kesin. Her biri yaklaşık beş santimetre uzunluğunda ve 35 mikrometre çapında 16 nikrom tel kesin. Kabloları kılavu...

Video: Micro-Drive System Assembly and Electrode Array Implantation for Multichannel Recording in Mice  

Multichannel Extracellular Recording in Freely Moving Mice

The protocol aims to uncover the properties of neuronal firing and network local field potentials (LFPs) in behaving mice carrying out specific tasks by correlating the electrophysiological signals with spontaneous and/or specific behavior. This technique represents a valuable tool in studying the neuronal network activity underlying these behaviors. The article provides a detailed and complete procedure for electrode implantation and consequent extracellular recording in free-moving conscious mice. The study includes a detailed method for implanting the microelectrode arrays, capturing the LFP and neuronal spiking signals in the motor cortex (MC) using a multichannel system, and the subsequent offline data analysis. The advantage of multichannel recording in conscious animals is that a greater number of spiking neurons and neuronal subtypes can be obtained and compared, which allows the evaluation of the relationship between a specific behavior and the associated electrophysiological signals. Notably, the multichannel extracellular recording technique and the data analysis procedure described in the present study can be applied to other brain areas when conducting experiments in behaving mice.

The protocol describes the methodology of extracellular recording in the motor cortex (MC) to reveal extracellular electrophysiological properties in freely moving conscious mice, as well as the data analysis of local field potentials (LFPs) and spikes, which is useful for evaluating the network neural activity underlying behaviors of interest.

The protocol aims to uncover the properties of neuronal firing and network local field potentials (LFPs) in behaving mice carrying out specific tasks by ...

Nörobilim

Begin by assembling the Microdrive system. Connect two computer-designed boards using two stulls and a screw that holds the movable Microdrive, and attach the connector to one board. Ensure the Microdrive can carry two sets of eight guide tubes for each side of the motor cortex or MC region.Cut the guide tubes to the same length. Cut 16 nichrome wires, each measuring approximately five centimeters long and 35 micrometers in diameter. Load the wires into the guide tubes and apply glue to fix them.Strip the wire insulation and twine each exposed wire to each pin from the connector following the channel map and the reference and ground electrodes, then slowly coat conducting paint onto each pin. Cover the pins using epoxy resin, then perform gold plating via an impedance tester to reduce the impedance of the electrode tips to approximately 350 kiloohms. For electrode array implantation, fix the anesthetized mouse in a stereotaxic apparatus and use a temperature controller to maintain its rectal temperature at 37 degrees Celsius.Then make a small midline incision to expose the skull. Remove the residual tissue using scissors and clean the skull with sterile saline-soaked cotton buds. Using a glass microelectrode filled with ink, mark the desired locations of the bilateral MC for implantation.Next, using a skull drill, carefully drill two small holes on both the left and right sides of the coordinated skull in the MC regions. Gently remove the dura mater from the holes with fine forceps. Then insert the Microdrive system into the center of the holes, using a micromanipulator at 10 micrometers per second.After finishing the insertion, fill the petroleum jelly into the dental cement walls and join the bottom plate of the Microdrive system and the dental cement walls with the mixed dental cement.

Multichannel Recording in the Bilateral MC in Free-Moving Mice and Neurophysiological Data Analysis

For the multi-channel recording, move down the electrode arrays by twisting the screw on the movable part of the micro-drive system one day in advance. Hold the head of an awake mouse lightly and carefully. Then, link the center of the head stage and a helium balloon with a thread to offset the weight of the head stage and the micro-drive system.Capture raw signals using the recording electrodes and multi-channel systems by sampling at 30 kilohertz in the recording software. Then digitize using a digital analog converter from the multi-channel systems. Extract the local field potential, or LFP signals, from the raw data by re-sampling at 10 kilohertz.Then, using a notch filter, remove the 50-hertz line noise. For spike sorting and analysis, in the spike sorting software, click on File, then Open, and nev files to open the spike data sampled at 30 kilohertz. Click on Info to select the unsorted channel.Then choose Sort, Change Sort Method, and Use K-Means. Press the button Valley Seeking Sort, then K-Means Sorting to obtain the sorted units. Next, in the neurophysiological data analysis software, open the sorted spike file by clicking on File, Import Data, and BlackRock File.To obtain the autocorrelogram for the selected unit, click on Analysis, then Autocorrelograms, and set the parameters. Load the sorted spike data. Then, click on Analysis, and Interspike Interval Histograms to obtain the interspike interval histogram, and then set the desired parameters.Click on Analysis, then Crosscorrelograms to obtain the crosscorrelogram between two sorted unit events. And then set the reference events and parameters. For LFP analysis, click on File, Import Data, and BlackRock File, to open the continuous signal data sampled at 10 kilohertz.Then, by clicking Analysis and Spectrum for Continuous, analyze the power spectrum for the LFP from the selected channel. Next, click on Analysis, then Coherence for Continuous to analyze the coherence for two LFPs from the left and right sides of the MC.Then, click on Analysis, followed by Correlation with Continuous Variables to analyze the correlation between two LFPs from the left and right sides of the MC.Once done, click on Results, then Numerical Results to save the Power Spectrum Density, Coherence, and Correlation with a xls file name extension. To analyze correlations between the spike and LFP, click on File, then Import Data and BlackRock File to open the continuous signal data and spike data.Then, click on Analysis and Coherence Analysis to analyze the coherence between the spikes and LFP from the selected channel. Finally, click on Results, then Numerical Results to save the results of the spike field coherence with a xls file name extension. The valley width and waveform duration of the units in the MC of the mouse showed that both the valley width and waveform duration of the MC putative pyramidal neurons in mice are higher than those of the putative interneurons.The crosscorrelogram between putative pyramidal neurons and interneurons indicated that the putative pyramidal neurons spiking occurs before the putative interneurons with a window of 18 milliseconds. In the LFP analysis, the LFPs of the left and right MC in normal mice were similar in the power spectrum, suggesting synchronized activities between the left and right MC.Further, the coherence and correlation between the left and right MC were calculated. The curve of spike field coherence in the MC of a normal mouse showed a stronger low gamma coherence for the putative interneurons compared to the pyramidal neurons.