Name: planar and three-dimensional printing of conductive inks
Uploaded: 2011-12-09T12:00:00
Duration: 10 min 49 s
Description: Watch this Scientific Journal Video about Planar and Three-Dimensional Printing of Conductive Inks at JoVE.com

This material is based on work supported by the U.S. Department of Energy, Materials Sciences and Engineering Division (Award No. DEFG-02-07ER46471) and the DOE Energy Research Center on Light-Materials Interactions in Energy Conversion (Award No. DE-SC0001293), and benefitted from access to the Center for Microanalysis of Materials within the Frederick Seitz Materials Research Laboratory (FSMRL).

1. Introduction
<ol>
	<li>This paper demonstrates the 1D, 2D, and 3D printing of conductive microelectrodes via direct-write assembly.</li>
	<li>Direct-write assembly is a method of building up 1D-to-3D printed structures by the deposition of concentrated inks through fine nozzles.</li>
	<li>Our system consists of a computer-controlled 3-axis translation stage, an ink reservoir and nozzle, and 10x telescopic lens for imaging (Figure 1).</li>
	<li>Direct-write assembly is a filamentary printing approach in which concentrated inks are extruded through cylindrical nozzles, whose diameters range from 0.1 to 250 &mu;m (Figure 2). Notably, due to the viscoelastic ink characteristics, direct-write assembly enables self-supporting spanning features (Figure 3). To date, a wide range of inks, including those composed of ceramic6,7, organic8-10, metallic11-15, polymeric16,17, and sol-gel18,19 materials have been developed for this printing approach (Figure 4).</li>
</ol>
2. Preparation of highly concentrated silver nanoparticle inks
<ol>
	<li>Silver nanoparticle inks are prepared by first dissolving a blend of 5,000 and 50,000 molecular weight of poly(acrylic acid) in a mixture of 50 g water and 40 g diethanolamine (Video 2.1).</li>
	<li>The polymer acts as a capping agent to control the size of the silver nanoparticles.</li>
	<li>Next, an aqueous solution of silver nitrate is injected into the polymer solution. After addition, a light yellow transparent solution is obtained (Video 2.2).</li>
	<li>After stirring for 24 hrs at room temperature, the solution develops a reddish-brown color (Video 2.3), that coincides with the formation of silver nanoparticles of 5 nm diameter, as determined by transmission electron microscopy.</li>
	<li>Next, the solution is sonicated at 65 &deg;C in a water bath for 2 hrs for further particle growth (Video 2.4).</li>
	<li>After sonication, the solution is transferred to a 500 ml beaker and cooled to room temperature. Then, 300 ml of ethanol is titrated at a rate of 30 ml / min. Since ethanol is a poor solvent for the poly(acrylic acid) capping agent, the particles rapidly coagulate and precipitate from solution (Video 2.5).</li>
	<li>After decanting the supernatant, the precipitate is collected into a centrifuge tube and centrifuged at 9000 rpm for 20 minutes (Video 2.6).</li>
	<li>After this step, a highly concentrated silver nanoparticle ink with a solids loading of ~85 wt% is obtained (Video 2.7).</li>
	<li>Further control over ink viscosity and elastic modulus can be achieved by dilution, followed by homogenization. For an example, a humectant solution, such as ethylene glycol, can be added to the ink and then homogenized at 2000 rpm for 3 minutes using a Thinky homogenization mixer. After this process, a uniform ink of a bluish to magenta color is obtained (Video 2.8).</li>
	<li>The TEM image shows silver nanoparticles obtained by this synthesis procedure (Figure 5_left). The particles have a mean diameter of 20 nm with a size distribution of 5-50 nm. Printed structures require post-annealing to enhance their conductivity. After annealing at 250&deg;C for less than 30 min, the silver nanoparticles form conductive microelectrodes with an electrical resistivity approaching to 10-5 &Omega;&bull;cm (Figure 5_bottom right). The microstructural evolution of the printed silver microelectrodes as a function of annealing temperature is shown in Figure 5_top right. As the temperature increases from 150&deg; to 550&deg;C, the microelectrodes undergo densification with a total volumetric shrinkage of ~30%.11</li>
	<li>The ink rheology, which strongly depends on its solids loading, determines its printability. The ink viscosity increases with increasing solids loading (Figure 6). Because dilute inks with low viscosity result in a significant lateral spreading, concentrated inks with a solids loading ranging from 70 to 85 wt% are required for printing of planar and spanning ink filaments.</li>
	<li>The ink elastic modulus increases with increasing solids loading (Figure 7). In the linear viscoelastic region, the elastic modulus rises nearly three orders of magnitude as the solids loading increases 60 to 75 wt%. A minimum elastic modulus of 2000 Pa is required to produce self-supporting or spanning features.</li>
</ol>
3. Direct-write assembly
<ol>
	<li>Direct-write assembly is carried out by first loading the ink into a syringe barrel. After attaching a deposition nozzle, the ink-loaded syringe barrel is mounted onto the 3-axis printing stage (Video 3.1).</li>
	<li>Using a computer program, arbitrary designs, including linear, planar, and complex three-dimensional structures can be easily generated (Video 3.2).</li>
	<li>Next, the nozzle height is adjusted with the aid of telescope lens with a 10x zoom (Video 3.3).</li>
	<li>After applying pressure using an air-powered fluid dispensing system, the ink is deposited onto the substrate with a controlled printing speed (Video 3.4). The required pressure depends upon ink rheology, nozzle diameter, and printing speed, but typical values range from 10-100 psi at 20-500 &mu;m/s. This printing is performed in air at room temperature. Using this printing procedure, the printing of silver microelectrodes in different layouts and size scales is demonstrated.</li>
	<li>For an example, the printing of conductive silver grids with a center-to-center line spacing of 100 &mu;m, patterned by a 5-&mu;m nozzle on a silicon wafer substrate is demonstrated (Video 3.5).</li>
	<li>In addition, this video shows how to create a high aspect ratio cylindrical structure by a 30-&mu;m nozzle using a layer-by-layer printing method (Video 3.6).</li>
	<li>Furthermore, the omnidirectional printing of silver microelectrodes between two glass substrates offset by a 1-mm height difference is demonstrated using a 30-&mu;m nozzle (Video 3.7).</li>
	<li>Completely free-standing, vertically printed silver microspikes can be created by a 30-&mu;m nozzle on a Si wafer substrate (Video 3.8).</li>
	<li>Finally, this video shows direct writing of a spanning silver microelectrode using a 10-&mu;m nozzle (Video 3.9). The printed feature can span distances up to one centimeter with minimal drooping or buckling.</li>
</ol>
4. Representative results:
We prepared a highly concentrated silver nanoparticle inks and demonstrated printed conductive features in planar and 3D motifs for electronic and optoelectronic applications with printing resolution ~ 2 - 30 &mu;m. For an example, Figure 8 exhibits the printing resolution of this technique. Printed features with minimum electrode width of ~ 2 &mu;m (1.4 &mu;m thick) are obtained in a single pass using a 1-&mu;m nozzle11.
Figure 9 shows transparent conductive silver grids, patterned by a 5 &mu;m nozzle on a flexible polyimide film12. The texts underneath the printed grids are clearly visible. These transparent silver grids could be attractive alternatives for transparent conducting oxide (TCO) materials.
Conformal printing onto a non-planar substrates is also enabled by this method. Figure 10 demonstrates the conformal printing of a 3D electrically small antenna. A 100 &mu;m metal nozzle is used to print meander-line patterns on the surface of a glass hemisphere13. This approach may find several applications including implantable and wearable antennas, electronics, and sensors.
Applications of spanning silver microelectrodes in three-dimensional photovoltaics and light-emitting diodes are demonstrated (Figure 11-14).
First, Figure 11 is an example of silicon spherical shell. This tenuous film with a 2-&mu;m thickness can be wire-bonded to an external circuit by omnidirectional printing14. This method uses minimal contact pressure, which is highly advantageous for delicate devices.
Next, Figure 12 demonstrates an example of printing a spanning interconnect for a silicon solar microcell array in which silicon microribbon elements are separated by 33-&mu;m gap15.
Next, Figure 13 shows silver interconnects for the gallium arsenide-based LED array with 4-by-4 pixels, where each pixel (500 x 500 x 2.5 &mu;m3) is spaced 200 &mu;m apart11. The bottom image displays the LED array, emitting uniform red light under an applied bias of 6 V from a single pixel. The ability to print spanning electrodes enables multilayer interconnection without the use of supporting or sacrificial layers (top images).
As a final demonstration, Figure 14 shows SEM images for the complex 3D microperiodic silver lattice printed by a 5&mu;m nozzle.
<img alt="Figure 1" src="/files/ftp_upload/3189/3189fig1.jpg" /> 
Figure 1. Optical image of direct ink writing apparatus.
<img alt="Figure 2" src="/files/ftp_upload/3189/3189fig2.jpg" /> 
Figure 2. Direct ink writing of a filamentary feature.
<img alt="Figure 3" src="/files/ftp_upload/3189/3189fig3.jpg" /> 
Figure 3. Direct ink writing of self-supporting spanning features.
<img alt="Figure 4" src="/files/ftp_upload/3189/3189fig4.jpg" /> 
Figure 4. Ink designs for direct ink writing. A wide range of concentrated viscoelastic inks have been developed for direct writing of planar and complex 3D structures with microscale features.
<img alt="Figure 5" src="/files/ftp_upload/3189/3189fig5.jpg" /> 
Figure 5. (Left) Transmission electron microscopy (TEM) image of silver nanoparticles. (Top right) SEM images of silver microelectrodes patterned with a 15-&mu;m nozzle as a function of annealing temperature. (Bottom right) Electrical resistivity of silver microelectrodes as a function of annealing temperature and time.
<img alt="Figure 6" src="/files/ftp_upload/3189/3189fig6.jpg" /> 
Figure 6. Apparent viscosity (&eta;) of the silver nanoparticle inks as a function of solids loading.
<img alt="Figure 7" src="/files/ftp_upload/3189/3189fig7.jpg" /> 
Figure 7. Shear elastic modulus (G') as a function of shear stress for silver nanoparticle inks of varying solids loading.
<img alt="Figure 8" src="/files/ftp_upload/3189/3189fig8.jpg" /> 
Figure 8. SEM images of planar arrays of silver microelectrodes patterned on a Si wafer with a 1-&mu;m nozzle.
<img alt="Figure 9" src="/files/ftp_upload/3189/3189fig9.jpg" /> 
Figure 9. Optical image of transparent conductive silver grids (left) and SEM images of the grids printed as a function of line pitch (right).
<img alt="Figure 10" src="/files/ftp_upload/3189/3189fig10.jpg" /> 
Figure 10. Optical image captured during conformal printing of electrically small antennas on a hemispherical glass substrate.
<img alt="Figure 11" src="/files/ftp_upload/3189/3189fig11.jpg" /> 
Figure 11. Optical image obtained during printing of spanning silver microelectrodes onto a thin (2-&mu;m) silicon spherical shell.
<img alt="Figure 12" src="/files/ftp_upload/3189/3189fig12.jpg" /> 
Figure 12. SEM image of a spanning silver microelectrode printed onto a silicon solar microcell array.
<img alt="Figure 13" src="/files/ftp_upload/3189/3189fig13.jpg" /> 
Figure 13. SEM images (top) and optical image (bottom) of a 4-by-4 LED chip array interconnected by silver microelectrodes.
<img alt="Figure 14" src="/files/ftp_upload/3189/3189fig14.jpg" /> 
Figure 14. SEM image of 3D microperiodic silver lattice.

<ol>
	<li>Chrisey, D. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+power+of+direct+writing.">The power of direct writing.</a> Science. 289, 879-881 (2000).</li><li>Sirringhaus, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-resolution+inkjet+printing+of+all-polymer+transistor+circuits.">High-resolution inkjet printing of all-polymer transistor circuits.</a> Science. 290, 2123-2126 (2000).</li><li>Kim, R. -. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Waterproof+AllnGaP+optoelectronics+on+stretchable+substrates+with+applications+in+biomedicine+and+robotics.">Waterproof AllnGaP optoelectronics on stretchable substrates with applications in biomedicine and robotics.</a> Nat. Mater. 9, 929-937 (2010).</li><li>Lewis, J. A., Gratson, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+writing+in+three+dimensions.">Direct writing in three dimensions.</a> Mater. Today. 7, 32-39 (2004).</li><li>Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+ink+writing+of+3D+functional+materials.">Direct ink writing of 3D functional materials.</a> Adv. Funct. Mater. 16, 2193-2204 (2006).</li><li>Lewis, J. A., Smay, J. E., Stuecker, J., Cesarano, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+ink+writing+of+three-dimensional+ceramic+structures.">Direct ink writing of three-dimensional ceramic structures.</a> J. Am. Ceram. Soc. 89, 3599-3609 (2006).</li><li>Smay, J. E., Gratson, G. M., Shepherd, R. F., Sesarano, J., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Directed+colloidal+assembly+of+3D+periodic+structures.">Directed colloidal assembly of 3D periodic structures.</a> Adv. Mater. 14, 1279-1283 (2002).</li><li>Therriault, D., White, S. R., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chaotic+mixing+in+three-dimensional+microvascular+networks+fabricated+by+direct-write+assembly.">Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly.</a> Nat. Mater. 2, 265-271 (2003).</li><li>Hansen, C. J., Wu, W., Toohey, K. S., Sottos, N. R., White, S. R., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-healing+materials+with+interpenetrating+microvascular+networks.">Self-healing materials with interpenetrating microvascular networks.</a> Adv. Mater. 21, 4143-4147 (2009).</li><li>Therriault, D., Shepherd, R. F., White, S. R., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fugitive+ink+for+direct-write+assembly+of+three-dimensional+microvascular+networks.">Fugitive ink for direct-write assembly of three-dimensional microvascular networks.</a> Adv. Mater. 17, 395-399 (2005).</li><li>Ahn, B. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Omnidirectional+printing+of+flexible,+stretchable,+and+spanning+silver+microelectrodes.">Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes.</a> Science. 323, 1590-1593 (2009).</li><li>Ahn, B. Y., Lorang, D. J., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transparent+conductive+grids+via+direct+writing+of+silver+nanoparticle+inks.">Transparent conductive grids via direct writing of silver nanoparticle inks.</a> Nanoscale. 3, 2700-2702 (2011).</li><li>Adams, J. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Conformal+printing+of+electrically+small+antennas+on+three-dimensional+surfaces.">Conformal printing of electrically small antennas on three-dimensional surfaces.</a> Adv. Mater. 23, 1335-1340 (2011).</li><li>Guo, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Two-+and+three-dimensional+folding+of+thin+film+single-crystalline+silicon+for+photovoltaic+power+applications.">Two- and three-dimensional folding of thin film single-crystalline silicon for photovoltaic power applications.</a> PNAS. 106, 20149-20154 (2009).</li><li>Yoon, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultrathin+silicon+solar+microcells+for+semitransparent,+mechanically+flexible+and+microconcentrator+module+designs.">Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs.</a> Nat. Mater. 7, 907-915 (2008).</li><li>Gratson, G. M., Xu, M., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+writing+of+three-dimensional+webs.">Direct writing of three-dimensional webs.</a> Nature. 428, 386-386 (2004).</li><li>Lebel, L. L., Aissa, B., Khakani, M. A. E., Therriault, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultraviolet-assisted+direct-write+fabrication+of+carbon+nanotube/polymer+nanocomposite+microcoils.">Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils.</a> Adv. Mater. 22, 592-596 (2010).</li><li>Ahn, B. Y., Lorang, D. J., Duoss, E. B., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+assembly+of+microperiodic+planar+and+spanning+ITO+microelectrodes.">Direct-write assembly of microperiodic planar and spanning ITO microelectrodes.</a> Chem. Commun. 46, 7118-7120 (2010).</li><li>Duoss, E. B., Twardowski, M., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sol-gel+inks+for+direct-write+assembly+of+functional+oxides.">Sol-gel inks for direct-write assembly of functional oxides.</a> Adv. Mater. 19, 3485-3489 (2007).</li><li>Salaita, K., Wang, Y. H., Mirkin, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Application+of+dip-pen+nanotechnology.">Application of dip-pen nanotechnology.</a> Nat. Nanotech. 2, 145-155 (2007).</li><li>Zhang, H., Lee, K. -. B., Li, Z., Mirkin, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biofunctionalized+nanoarrays+of+inorganic+structures+prepared+by+dip-pen+nanolithography.">Biofunctionalized nanoarrays of inorganic structures prepared by dip-pen nanolithography.</a> Nanotechnology. 14, 1113-1117 (2003).</li><li>Hung, S. -. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dip-pen+nanolithography+of+conductive+silver+traces.">Dip-pen nanolithography of conductive silver traces.</a> J. Phys. Chem. C. 114, 9672-9677 (2010).</li><li>Park, J. -. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-resolution+electrohydrodynamic+jet+printing.">High-resolution electrohydrodynamic jet printing.</a> Nat. Mater. 6, 782-789 (2007).</li><li>Schirmer, N. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=On+ejecting+colloids+against+capillarity+from+sub-micrometer+openings:+On-demand+dielectrophoretic+nanoprinting.">On ejecting colloids against capillarity from sub-micrometer openings: On-demand dielectrophoretic nanoprinting.</a> Adv. Mater. 22, 4701-4705 (2010).</li><li>Park, J. -. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=electrofield+liquid+jets+for+high-resolution+printing+of+charge.">electrofield liquid jets for high-resolution printing of charge.</a> Nano. Lett. 10, 584-591 (2010).</li><li>Ghosh, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+assembly+of+micro-periodic+silk+fibroin+scaffolds+for+tissue+engineering+applications.">Direct-write assembly of micro-periodic silk fibroin scaffolds for tissue engineering applications.</a> Adv. Funct. Mater. 18, 1883-1889 (2008).</li><li>Barry, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+assembly+of+3D+hydrogel+scaffolds+for+guided+cell+growth.">Direct-write assembly of 3D hydrogel scaffolds for guided cell growth.</a> Adv. Mater. 21, 2407-2410 (2009).</li><li>Shepherd, J. N. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+microperiodic+hydrogel+scaffolds+for+robust+neuronal+cultures.">3D microperiodic hydrogel scaffolds for robust neuronal cultures.</a> Adv. Mater. 21, 47-54 (2011).</li><li>Wu, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+assembly+of+biomimetic+microvascular+networks+for+efficient+fluid+transport.">Direct-write assembly of biomimetic microvascular networks for efficient fluid transport.</a> Soft. Matter. 6, 739-742 (2010).</li><li>Wu, W., DeConinck, A., Lewis, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Omnidirectional+Printing+of+3D+Microvascular+Networks.">Omnidirectional Printing of 3D Microvascular Networks.</a> Adv. Mater. 23, H178-H183 (2011).</li></ol>

No conflicts of interest declared.

Conventional droplet-based printing approaches, such as inkjet printing, are limited to the fabrication of planar electrodes with low aspect ratio due to the dilute nature and low viscosity of the inks used. Recently, dip-pen nanolithography (DPN)20-22 and e-jet printing23-25 have been used to pattern conductive features. These routes also employ dilute, low viscosity inks. Pearton and co-workers used DPN to deposit a commercially available silver nanoparticle ink at write speeds of up to 1600 &mu;m s-1 and line widths of approximately 0.5 &mu;m22. However, fabrication of reproducible patterns over large areas has yet to be demonstrated by this approach. Silver nanoparticle inks have also been deposited by e-jet printing to form conductive traces with line widths of ~ 1.5 &mu;m25. However, as with inkjet printing, inhomogeneous printed features may arise due to satellite drop formation and non-uniform drop drying24,25.
As demonstrated above, direct-write assembly of concentrated silver nanoparticle inks overcomes these limitations through a filamentary-based printing approach. This technique enables the fabrication of conductive microelectrodes with a high aspect ratios (h/w &asymp; 1.0) in a single passes allowing the creation of 1D, 2D, and 3D architectures. The size of the printed features depends upon nozzle diameter, ink solids loading, applied pressure, and printing speed. To date, conductive traces as small as ~ 2 &mu;m have been patterned using a 1 &mu;m nozzle at modest speeds (&lt; 2 mm s-1). By tailoring the ink composition and nozzle geometry, maximum printing speeds in excess of 10 cm s-1 are possible. However, high speed printing of using fine nozzles (&lt; 5 &mu;m) remains a significant challenge.
To demonstrate applications of direct-write assembly, we fabricated conductive grids, electrically small antennas, solar cells, and light-emitting diodes with planar and spanning printed electrodes (Figure 8-14). Notably, our approach is not restricted to the creation of metallic structures. Using other ink designs, such as those based on silk fibroin, hydrogel and fugitive organic inks, we have constructed 3D scaffolds and microvascular networks for tissue engineering and cell culture via direct-write assembly26-30.
Looking towards the future, there are many opportunities and challenges. Further advances require new ink designs, better modeling of ink flow dynamics, and enhanced robotic and control systems. Large-area fabrication of 1D to 3D structures with high throughput and nanoscale resolution (&lt; 100 nm) remains a significant challenge.

<table border="1">
<tr>
<td>Name of the reagent</td>
<td>Company</td>
<td>Catalogue number</td>
<td>Comments </td>
</tr>
<tr>
<td>Poly(acrylic acid)</td>
<td>Polysciences, Inc.</td>
<td>06519</td>
<td>m.w. 5,000 g/mol</td>
</tr>
<tr>
<td>Poly(acrylic acid)</td>
<td>Polysciences, Inc.</td>
<td>00627</td>
<td>m.w. 50,000 g/mol</td>
</tr>
<tr>
<td>Silver nitrate</td>
<td>Sigma-Aldrich</td>
<td>209139</td>
<td>Silver source</td>
</tr>
<tr>
<td>Diethanolamine</td>
<td>Sigma-Aldrich</td>
<td>D8885</td>
<td>Solvent/Reducing agent</td>
</tr>
<tr>
<td>Ethylene glycol</td>
<td>Sigma-Aldrich</td>
<td>102466</td>
<td>Humectant</td>
</tr>
<tr>
<td>Sonicater</td>
<td>Fisher Scientific</td>
<td>FS30H</td>
<td>-</td>
</tr>
<tr>
<td>Centrifuge</td>
<td>Beckman Coulter</td>
<td>AvantiTM J-25 I</td>
<td>-</td>
</tr>
<tr>
<td>Robotic stage</td>
<td>Aerotech Inc.</td>
<td>ABL 900010</td>
<td>3-axis motion</td>
</tr>
<tr>
<td>Syringe barrel</td>
<td>EFD Inc.</td>
<td>5109LBP-B</td>
<td>3 ml</td>
</tr>
<tr>
<td>Nozzle</td>
<td>EFD Inc.</td>
<td>-</td>
<td>i.d. = 0.1 - 250 &mu;m</td>
</tr>
<tr>
<td>Dispenser</td>
<td>EFD Inc.</td>
<td>800</td>
<td>Air-powered</td>
</tr>
<tr>
<td>Design software</td>
<td>Custom designed</td>
<td>-</td>
<td>Mingjie Xu</td>
</tr>
</table>

planar and three-dimensional printing of conductive inks

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices1-3. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes.
Direct-write assembly4,5 is a 1-to-3D printing technique that enables the fabrication of features ranging from simple lines to complex structures by the deposition of concentrated inks through fine nozzles (~0.1 - 250 &mu;m). This printing method consists of a computer-controlled 3-axis translation stage, an ink reservoir and nozzle, and 10x telescopic lens for visualization. Unlike inkjet printing, a droplet-based process, direct-write assembly involves the extrusion of ink filaments either in- or out-of-plane. The printed filaments typically conform to the nozzle size. Hence, microscale features (&lt; 1 &mu;m) can be patterned and assembled into larger arrays and multidimensional architectures.
In this paper, we first synthesize a highly concentrated silver nanoparticle ink for planar and 3D printing via direct-write assembly. Next, a standard protocol for printing microelectrodes in multidimensional motifs is demonstrated. Finally, applications of printed microelectrodes for electrically small antennas, solar cells, and light-emitting diodes are highlighted.

Watch this Scientific Journal Video about Planar and Three-Dimensional Printing of Conductive Inks at JoVE.com

Planar and Three-Dimensional Printing of Conductive Inks

Planar and three-dimensional printing of conductive metallic inks is described. Our approach provides new avenues for fabricating printed electronic, optoelectronic, and biomedical devices in unusual layouts at the microscale.

Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical ...

Research

JoVE Journal

Bioengineering

Three-dimensional Optical-resolution Photoacoustic Microscopy

Optical microscopy, providing valuable insights at the cellular and organelle levels, has been widely recognized as an enabling biomedical technology. As ...

Alginate Hydrogels for Three-Dimensional Organ Culture of Ovaries and Oviducts

Ovarian cancer is the fifth leading cause of cancer deaths in women and has a 63% mortality rate in the United States1. The cell type of origin for ...

Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp

The fluid-structure energy exchange process for normal speech has been studied extensively, but it is not well understood for pathological conditions. ...

Human Cartilage Tissue Fabrication Using Three-dimensional Inkjet Printing Technology

Bioprinting, which is based on thermal inkjet printing, is one of the most attractive enabling technologies in the field of tissue engineering and ...

Analysis of Cell Migration within a Three-dimensional Collagen Matrix

The ability to migrate is a hallmark of various cell types and plays a crucial role in several physiological processes, including&#160;embryonic ...

Generation of a Three-dimensional Full Thickness Skin Equivalent and Automated Wounding

In vitro models are a cost effective and ethical alternative to study cutaneous wound healing processes. Moreover, by using human cells, these models ...

Preparation and Analysis of In Vitro Three Dimensional Breast Carcinoma Surrogates

Preparation and Analysis of In Vitro Three Dimensional Breast Carcinoma Surrogates

Three dimensional (3D) culture is a more physiologically relevant method to model cell behavior in vitro than two dimensional culture. Carcinomas, ...

Engineering Three-dimensional Epithelial Tissues Embedded within Extracellular Matrix

The architecture of branched organs such as the lungs, kidneys, and mammary glands arises through the developmental process of branching morphogenesis, ...

Fabrication of Three-dimensional Paper-based Microfluidic Devices for Immunoassays

Paper wicks fluids autonomously due to capillary action. By patterning paper with hydrophobic barriers, the transport of fluids can be controlled and ...

Culturing Mammalian Cells in Three-dimensional Peptide Scaffolds

A useful technique for culturing cells in a self-assembling nanofiber three-dimensional (3D) scaffold is described. This culture system recreates an ...