The authors acknowledge the design efforts of the undergraduate students Animesh Singh Kumawat, Kshitij Agarwal, Quinn Boser, Benjamin Cheung, Caroline Collins, Sarah Lojczyc, Derek Schlenker, Katherine Schoepp, and Arthur Zielinski.&#160;This study was partially funded through a Discovery Grant from the Natural Sciences and Engineering Research Council of Canada (RGPIN-2014-04666).

All methods described here have been approved by the Health Research Ethics Board of the University of Alberta.
1. Construction and Assembly of Structural Components
<ol>
	<li>Construct an attachment interface for interchangeable hemispherical bases: weld a base nut to a steel weld plate.&#160;</li>
	<li>Use a computer numerical controlled (CNC) milling machine to construct a cylindrical chassis, lid, and base from polyethylene as shown in Figure 1. Bolt the bas...

<ol>
	<li>Behm, D. G., Muehlbauer, T., Kibele, A., Granacher, U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+Strength+Training+Using+Unstable+Surfaces+on+Strength,+Power+and+Balance+Performance+Across+the+Lifespan:+A+Systematic+Review+and+Meta-analysis.">Effects of Strength Training Using Unstable Surfaces on Strength, Power and Balance Performance Across the Lifespan: A Systematic Review and Meta-analysis.</a> Sports Medicine. 45, 1645-1669 (2015).</li><li>Larivi&#232;re, C., Mecheri, H., Shahvarpour, A., Gagnon, D., Shirazi-Adl, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Criterion+validity+and+between-day+reliability+of+an+inertial-sensor-based+trunk+postural+stability+test+during+unstable+sitting.">Criterion validity and between-day reliability of an inertial-sensor-based trunk postural stability test during unstable sitting.</a> Journal of Electromyography and Kinesiology. 23, 899-907 (2013).</li><li>Paillard, T., No&#233;, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techniques+and+Methods+for+Testing+the+Postural+Function+in+Healthy+and+Pathological+Subjects.">Techniques and Methods for Testing the Postural Function in Healthy and Pathological Subjects.</a> BioMed Research International. 2015, (2015).</li><li>Williams, J., Bentman, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+investigation+into+the+reliability+and+variability+of+wobble+board+performance+in+a+healthy+population+using+the+SMARTwobble+instrumented+wobble+board.">An investigation into the reliability and variability of wobble board performance in a healthy population using the SMARTwobble instrumented wobble board.</a> Physical Therapy in Sport. 25, 108 (2017).</li><li>Wall, C., Kentala, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+displacement,+velocity,+and+combined+vibrotactile+tilt+feedback+on+postural+control+of+vestibulopathic+subjects.">Effect of displacement, velocity, and combined vibrotactile tilt feedback on postural control of vestibulopathic subjects.</a> Journal of Vestibular Research. 20, 61-69 (2010).</li><li>Alahakone, A. U., Arosha Senanayake, ., N, S. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vibrotactile+feedback+systems:+Current+trends+in+rehabilitation,+sports+and+information+display.">Vibrotactile feedback systems: Current trends in rehabilitation, sports and information display.</a> IEEE/ASME International Conference on Advanced Intelligent Mechatronics. , 1148-1153 (2009).</li><li>Shull, P. B., Damian, D. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Haptic+wearables+as+sensory+replacement,+sensory+augmentation+and+trainer+-+a+review.">Haptic wearables as sensory replacement, sensory augmentation and trainer - a review.</a> Journal of NeuroEngineering and Rehabilitation. 12, 12-59 (2015).</li><li>Prieto, T. E., Myklebust, J. B., Hoffmann, R. G., Lovett, E. G., Myklebust, B. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measures+of+postural+steadiness:+Differences+between+healthy+young+and+elderly+adults.">Measures of postural steadiness: Differences between healthy young and elderly adults.</a> IEEE Transactions on Biomedical Engineering. 43, 956-966 (1996).</li><li>Ribot-Ciscar, E., Vedel, J. P., Roll, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Vibration+sensitivity+of+slowly+and+rapidly+adapting+cutaneous+mechanoreceptors+in+the+human+foot+and+leg.">Vibration sensitivity of slowly and rapidly adapting cutaneous mechanoreceptors in the human foot and leg.</a> Neuroscience Letters. , 130-135 (1989).</li><li>Churchill, E., McConville, J. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Sampling and Data Gathering Strategies for Future USAF Anthropometry. , (1976).</li><li>Lee, H., Granata, K. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+stationarity+and+reliability+of+trunk+postural+stability.">Process stationarity and reliability of trunk postural stability.</a> Clinical Biomechanics. 23, 735-742 (2008).</li><li>Silfies, S. P., Cholewicki, J., Radebold, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effects+of+visual+input+on+postural+control+of+the+lumbar+spine+in+unstable+sitting.">The effects of visual input on postural control of the lumbar spine in unstable sitting.</a> Human Movement Science. 22, 237-252 (2003).</li><li>Loughlin, P., Mahboobin, A., Furman, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Designing+vibrotactile+balance+feedback+for+desired+body+sway+reductions.">Designing vibrotactile balance feedback for desired body sway reductions.</a> Annual International Conference of the IEEE Engineering in Medicine and Biology Society. , 1310-1313 (2011).</li><li>Goodworth, A. D., Wall, C., Peterka, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+feedback+parameters+on+performance+of+a+vibrotactile+balance+prosthesis.">Influence of feedback parameters on performance of a vibrotactile balance prosthesis.</a> IEEE Transactions on Neural Systems and Rehabilitation Engineering. 17, 397-408 (2009).</li><li>Marchal-Crespo, L., Reinkensmeyer, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Review+of+control+strategies+for+robotic+movement+training+after+neurologic+injury.">Review of control strategies for robotic movement training after neurologic injury.</a> Journal of NeuroEngineering and Rehabilitation. 6, 20-35 (2009).</li><li>Lee, B., Kim, J., Chen, S., Sienko, K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+phone+based+balance+trainer.">Cell phone based balance trainer.</a> Journal of NeuroEngineering and Rehabilitation. 9, 1-14 (2012).</li><li>Sienko, K. H., Balkwill, M. D., Wall, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biofeedback+improves+postural+control+recovery+from+multi-axis+discrete+perturbations.">Biofeedback improves postural control recovery from multi-axis discrete perturbations.</a> Journal of NeuroEngineering and Rehabilitation. 9, 53-64 (2012).</li><li>Williams, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+Evaluation+of+an+Instrumented+Wobble+Board+for+Assessing+and+Training+Dynamic+Seated+Balance.">Design and Evaluation of an Instrumented Wobble Board for Assessing and Training Dynamic Seated Balance.</a> Journal of Biomechanical Engineering. 140, 1-10 (2017).</li><li>van Die&#235;n, J. H., Koppes, L. L. J., Twisk, J. W. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Postural+sway+parameters+in+seated+balancing;+their+reliability+and+relationship+with+balancing+performance.">Postural sway parameters in seated balancing; their reliability and relationship with balancing performance.</a> Gait Posture. 31, 42-46 (2010).</li><li>Sigrist, R., Rauter, G., Riener, R., Wolf, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Augmented+visual,+auditory,+haptic,+and+multimodal+feedback+in+motor+learning:+A+review.">Augmented visual, auditory, haptic, and multimodal feedback in motor learning: A review.</a> Psychonomic Bulletin and Review. 20, 21-53 (2013).</li></ol>

The authors have nothing to disclose.

Methods for constructing a portable, instrumented, sitting device are presented. The device is portable and durable, building on previous studies of wobble chairs2,4 and vibrational feedback5,6,7 to make the benefits of these tools more powerful and accessible. Follow the assembly protocol in reverse to prepare the device for transportation or storage. The difficulty of ...

Upright sitting is a prerequisite for other human sensorimotor functions, including skilled movements (e.g., typing) and perturbed balance tasks (e.g., riding on a train). To rehabilitate and improve sitting and related functions, modern balance training techniques are used: unstable surfaces perturb sitting1,2 and motion tracking quantifies balance proficiency3,4. Balance training outcomes improve when vibration is delivered to the body using patterns that match performance5. Such sensory feedback is evidently effective as a rehabilitation and training method; yet, current sensory feedback methods are geared towards standing balance and require laboratory-based equipment6,7.
The purpose of the work presented here is to build a portable device that can be sat upon and passively destabilized to various degrees while built-in instruments record its position and deliver vibrational feedback to the sitting surface. This combination of tools integrates previous work on wobble chairs2,4 and vibrational feedback5,6,7, making the benefits of these tools more powerful and accessible. Also presented are a procedure to train upright sitting and an analysis of the quantitative outcomes, following the established literature on posturographic measures8. These methods are appropriate for studying the effects of sitting balance exercise with an unstable surface when combined with vibrational feedback. Anticipated applications include sports training, general improvement of motor coordination, assessment of balance proficiency, and rehabilitation following skeletal, muscular, or neurological injury.

<table>
	<tbody>
		<tr>
			<td>Chassis</td>
			<td>McMaster-Carr</td>
			<td>8657K421</td>
			<td>Moisture-Resistant LDPE Polyethylene Sheet 1-1/2&#34; Thick, 24&#34; X 24&#34;</td>
		</tr>
		<tr>
			<td>Lid</td>
			<td>McMaster-Carr</td>
			<td>8657K414</td>
			<td>Moisture-Resistant LDPE Polyethylene Sheet 1/4&#34; Thick, 24&#34; X 24&#34;</td>
		</tr>
		<tr>
			<td>Base</td>
			<td>McMaster-Carr</td>
			<td>8657K414</td>
			<td>Moisture-Resistant LDPE Polyethylene Sheet 1/4&#34; Thick, 24&#34; X 24&#34;</td>
		</tr>
		<tr>
			<td>Grip-Tape</td>
			<td>McMaster-Carr</td>
			<td>6243T471</td>
			<td>Nonabrasive Antislip Tape, Textured, 6&#34; Wide Strip, 2&#39; Long, Black</td>
		</tr>
		<tr>
			<td>Base Nut</td>
			<td>McMaster-Carr</td>
			<td>90596A039</td>
			<td>Steel Round-Base Weld Nut, 5/8&#34;-11 Thread Size</td>
		</tr>
		<tr>
			<td>Weld Plate</td>
			<td>McMaster-Carr</td>
			<td>1388K142</td>
			<td>Low-Carbon Steel Sheet 1/16&#34; Thick, 3&#34; X 3&#34;, Ground Finish</td>
		</tr>
		<tr>
			<td>Threaded Rod</td>
			<td>McMaster-Carr</td>
			<td>90322A170</td>
			<td>3&#34; 5/16&#34;-18 Medium-Strength Alloy Steel Threaded Stud</td>
		</tr>
		<tr>
			<td>Sleeve</td>
			<td>McMaster-Carr</td>
			<td>8745K19</td>
			<td>Chemical-Resistant PVC (Type I) Rod 1-1/4&#34; Diameter</td>
		</tr>
		<tr>
			<td>Square Flange</td>
			<td>McMaster-Carr</td>
			<td>8910K395</td>
			<td>Low Carbon Steel Bar, 1/8&#34; Thick, 1&#34; Wide</td>
		</tr>
		<tr>
			<td>Hitch</td>
			<td>McMaster-Carr</td>
			<td>4931T123</td>
			<td>Bolt-Together Framing Heavy-Duty Steel, 1-1/2&#34; Square</td>
		</tr>
		<tr>
			<td>Curved Base</td>
			<td>McMaster-Carr</td>
			<td>8745K48</td>
			<td>PVC Rod, 6&#34; Diameter</td>
		</tr>
		<tr>
			<td>Hitch Insert</td>
			<td>McMaster-Carr</td>
			<td>6535K313</td>
			<td>Bolt-Together Framing Heavy-Duty Steel, 1&#34; Square</td>
		</tr>
		<tr>
			<td>Extrusion</td>
			<td>McMaster-Carr</td>
			<td>6545K7</td>
			<td>1045 Cold Drawn Steel Square Bar Stock, 1&#39; X 1&#34; Wide, Unpolished</td>
		</tr>
		<tr>
			<td>Clamp</td>
			<td>Vlier</td>
			<td>TH103A</td>
			<td>Adjustable Torque Knob</td>
		</tr>
		<tr>
			<td>Footrest</td>
			<td>McMaster-Carr</td>
			<td>6582K431</td>
			<td>4130 Steel Tubing, 1&#34; X 1&#34; Wide, 0.065&#34; Wall Thickness, Unpolished Mill Finish</td>
		</tr>
		<tr>
			<td>Counterwieght</td>
			<td>McMaster-Carr</td>
			<td>8910K67</td>
			<td>Low-Carbon Steel Rectangular Bar 1-1/8&#34; Thick, 4&#34; Width</td>
		</tr>
		<tr>
			<td>Clevis Pin</td>
			<td>McMaster-Carr</td>
			<td>97245A616</td>
			<td>Zinc-Plated Steel Clevis Pin with Hairpin Cotter Pin, 3/16&#34; Diameter, 1-9/16&#34; Usable Length</td>
		</tr>
		<tr>
			<td>Microprocessor</td>
			<td>Arduino</td>
			<td>MEGA 2560</td>
			<td>Microcontroller board with 54 digital I/O pins and USB connection</td>
		</tr>
		<tr>
			<td>Inertial Measurement Unit</td>
			<td>x-io Technologies Ltd.</td>
			<td>x-IMU</td>
			<td>Inertial Measurement Unit and Attitude Heading Reference System with enclosure</td>
		</tr>
		<tr>
			<td>Vibrating Tactor</td>
			<td>Precision Microdrives</td>
			<td>DEV-11008</td>
			<td>Lilypad Vibe Board, available from SparkFun Electronics</td>
		</tr>
	</tbody>
</table>

a vibrotactile feedback device for seated balance assessment and training

Postural perturbations, motion tracking, and sensory feedback are modern techniques used to challenge, assess, and train upright sitting, respectively. The goal of the developed protocol is to construct and operate a sitting platform that can be passively destabilized while an inertial measurement unit quantifies its motion and vibrating elements deliver tactile feedback to the user. Interchangeable seat attachments alter the stability level of the device to safely challenge sitting balance. A built-in microcontroller allows fine-tuning of the feedback parameters to augment sensory function. Posturographic measures, typical of balance assessment protocols, summarize the motion signals acquired during timed balance trials. No dynamic sitting protocol to date provides variable challenge, quantification, and sensory feedback free of laboratory constraints. Our results demonstrate that non-disabled users of the device exhibit significant changes in posturographic measures when balance difficulty is altered or vibrational feedback provided. The portable, versatile device has potential applications in rehabilitation (following skeletal, muscular, or neurological injury), training (for sports or spatial awareness), entertainment (via virtual or augmented reality), and research (of sitting-related disorders).

Table 2 shows, for each experimental condition, the posturographic measures derived from observations of the AP and ML support surface tilts, averaged over 144 balance trials performed by 12 participants (2 x 2 x 3 trials per participant).
Effect of Changing the Balance Condition: The base condition was chosen to be dependent on the eye condition (i.e., when the eyes were closed, the ba...

Watch this Scientific Journal Video about A Vibrotactile Feedback Device for Seated Balance Assessment and Training at JoVE.com

A Vibrotactile Feedback Device for Seated Balance Assessment and Training

A sitting platform has been developed and assembled that passively destabilizes sitting posture in humans. During the user&#39;s stabilizing task, an inertial measurement unit records the device&#39;s motion, and vibrating elements deliver performance-based feedback to the seat. The portable, versatile device may be used in rehabilitation, assessment, and training paradigms.

Postural perturbations, motion tracking, and sensory feedback are modern techniques used to challenge, assess, and train upright sitting, respectively. ...

Many people suffer from seated instability, which can compromise functional independence and lead to secondary health complications. Our protocol holds the potential to assess, challenge, and improve balance during sitting. Our technique combines elements of existing balance research tools into one novel device that is optimized for clinical use and accessibility.Individuals who suffer under a newer muscular impairment may struggle to maintain seated balance. Our protocol provides access to assessment and training techniques that are known to benefit balance rehabilitation outcomes. This protocol can be applied to investigate balance control mechanisms and to optimize sensory feedback methods.New users of this protocol should be sure to use our supplemental drawing and solid model files to produce a working replica of the device. At the beginning, weld a base nut to a steel plate to construct an attachment interface for interchangeable, hemispherical bases. Using a computer numerical controlled, or CNC milling machine, construct a cylindrical chassis, lid, and base from polyethylene, then bolt the base plate to the base, and place the chassis on the base.Use the milling machine to construct a 37mm-long, 32mm outer diameter cylindrical polyvinyl chloride sleeve that fits onto a threaded rod. After welding steel flanges to each side of a steel hitch, bolt the hitch to the front of the base. Use a CNC turning machine to construct five identical 63mm-high, 152mm diameter polyethylene cylinders.In the center of the top surface of each cylinder, cut a 32mm hole to a depth of 38mm so that it fits the cylindrical sleeve with some interference. On the bottom surface of each cylinder, use the CNC turning machine to cut a uniformly curved base with the unique radius of curvature for each of the five cylinders, maintaining the overall height of 63mm. To construct the leg support attachment, first weld a 70mm steel hitch insert perpendicularly to one end of a 575mm steel extrusion.At the other end, clamp a 300mm cylindrical steel footrest to the extrusion. Use a bandsaw to cut a rectangular 29 by 100mm steel bar to a length of approximately 160mm so that it weighs 3.6kg. Insert the steel bar at the back of the chassis to counterbalance the leg support attachment, and assemble the device.Insert the clevis pins through the hitch and the hitch insert to connect the leg support. Then adjust the location of the clamp to the desired footrest height. Thread the rod into the base stud, such that approximately 35mm of the rod protrudes from the base, and insert the protruding rod into the desired curved base.Apply the grip tape to the lid, and cover the device with the lid. To instrument the device, connect an inertial measurement unit and eight vibrating tachters to a microcontroller. Program the microcontroller such that it reads anteroposterior and mediolateral tilt angles from the inertial measurement unit, and turns the vibrating tachters on or off based on the tilt angles.Secure the inertial measurement unit in the center of the chassis and arrange the vibrating tachters in a regular octagon with a radius of 10cm, centered 8cm anterior of the center of the chassis, so that they will lie under the seat of an average sized person. Then connect the microcontroller to a computer, and open the software user interface. To conduct the balance experiments, recruit consenting participants who are free of neurological and musculoskeletal disorders, and acute or chronic back pain, and record each participant's age, weight, and height.Next, open the user interface. The compass graph shows the tilt angle of the device, plus half the tilt velocity of the device in the anteroposterior and mediolateral directions. Prior to each balance trial, instruct the participant to don noise-canceling headphones, fold their arms across their chest, maintain an upright posture as much as possible, and verbally cue when they are ready.Use the dropdown menus in the trial parameter section of the user interface to label the current difficulty and eye condition, and click record to start the trial. For trials with eyes open, instruct the participant to focus on a fixed point straight ahead to help maintain balance. For trials with eyes closed, use a blindfold to ensure that the participant is completely deprived of visual feedback.Perform 20 30 second seated balance trials in series, taking breaks as warranted to avoid fatigue, and stopping at any time if necessary. An algorithm will compute which anteroposterior and mediolateral feedback thresholds to use and display the thresholds in the Q3 column of the user interface. The vibrotactile feedback thresholds can be optimized to provide feedback cues on direction and timing that are tailored toward a given task or goal.After four familiarization trials, copy the values in the Q3 column into the right column and click refresh to update the feedback thresholds shown on the compass graph based on the fourth familiarization trial. As the anteroposterior and mediolateral tilt angles are automatically stored in real time in a text file for analysis, analyze the anteroposterior and mediolateral signals to characterize the sitting performance for each of the experimental conditions. This table shows the postero-graphic measures derived from anteroposterior and mediolateral support surface tilts averaged for 144 balance trials, and performed by 12 participants under each experimental condition.Observations of anteroposterior tilt were significantly different between the eye open and eye closed balance conditions for the root-mean-square, centroidal frequency, and frequency dispersion. Consistent with other reports, these postero-graphic measures can discriminate between balance tasks during trials in which the vibrotactile feedback system was active. The centroidal frequency of the anteroposterior tilt observations was significantly higher than during the control trials.Consistent with other reports, this vibrotactile feedback protocol has a measurable effect on balance performance. All structural components have a corresponding solid model and drawing that are available for download and can be used to replicate the construction process. The procedure can be used to test hypotheses regarding the fundamental nature of dynamic upright sitting and the effectiveness of vibrotactile feedback as a balance training technique.This research provides a critical foundation for future work on clinical assessment and training tools for populations with impaired seated balance to improve their quality of life. The power tools used to construct this device may cause bodily harm;please follow all safety protocols.

a-vibrotactile-feedback-device-for-seated-balance-assessment

Research

JoVE Journal

Behavior

6.3K Görüntüleme.  University of Alberta. Birçok kişi, fonksiyonel bağımsızlığı tehlikeye atabilecek ve ikincil sağlık komplikasyonlarına yol açabilen oturmuş istikrarsızlıktan muzdariptir. Protokolümüz, oturma sırasında dengeyi değerlendirme, meydan okuma ve iyileştirme potansiyeline sahiptir. Tekniğimiz, mevcut denge araştırma araçlarının unsurlarını klinik kullanım ve erişilebilirlik için optimize edilmiş yeni bir cihazda birleştirir.Yeni bir kas bozukluğu altında muzdarip bireyler oturmu...