Name: micro-drive array for chronic in vivo recording: drive fabrication
Uploaded: 2009-04-20T00:00:00
Description: Watch this Scientific Journal Video about Micro-drive Array for Chronic in vivo Recording: Drive Fabrication at JoVE.com

We would like to acknowledge Linus D. Sun and Jeenah Jung, who originated the use of computer-designed, 3-D printed drives in our lab for recording from mice. In addition, we would like to acknowledge all past and present Wilson Lab members for their contributions to micro-drive and tetrode technology development in the lab.

<ol>
<li>Micro-drive array overview A complete micro-drive array consists of several main components (Fig. 1):<ol>
<li>A computer designed plastic base that holds 21 independently movable micro-drives. </li>
<li>A cannula at the bottom of the base in which a set of stationary tetrode guide tubes is collected.</li>
<li>21 micro-drives that each carry one tetrode and which can be individually driven using a screw.</li>
<li>An electrode interface board for interconnection between tetrodes and pre-amplifiers.</li>
<li>A...

<ol>
	<li>Yamamoto, J., Wilson, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large-scale+chronically+implantable+precision+motorized+microdrive+array+for+freely+behaving+animals.">Large-scale chronically implantable precision motorized microdrive array for freely behaving animals.</a> J. Neurophysiol. 100 (4), 2430-2440 (2008).</li></ol>

This protocol describes the general features of the micro-drive building process. It has been successfully modified to produce drive arrays with multiple recording targets or smaller arrays for recordings in mice. In addition to recording from the hippocampus, many researchers use these drives to target cortical and sub-cortical structures. The use of longer screws may be required in order to record from deeper brain structures. With extensive modification to the drive base, motorized drives my be used in lieu of manuall...

<table>
<tbody>
	<tr>
<td>3D-printed plastic parts</td>
<td>Material</td>
<td>American Precision Prototyping (www.approto.com)</td>
<td>&nbsp;</td>
<td>Parts are printed by stereolithography (SLA) using DSM 14120 'ABS-like', DSM 11120 'Watershed' or Accura 55 resins. Request high resolution, no sandblasting.</td>
</tr>
<tr>
<td>stainless steel tubing</td>
<td>Material</td>
<td>Small Parts (www.smallparts.com)</td>
<td>&nbsp;</td>
<td>Cut to custom length and deburred. Sizes: 13 Ga (1pc @ 10 mm), 15 Ga (1pc @ 50 mm), 20 Ga thin wall (21pcs @ 5 mm), 23 Ga (21pcs @ 14 mm) </td>
</tr>
<tr>
<td>Dental cement powder</td>
<td>Material</td>
<td>A-M Systems (www.a-msystems.com)</td>
<td>525000</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Dental cement solvent</td>
<td>Material</td>
<td>A-M Systems</td>
<td>526000</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Electrode interface board</td>
<td>Material</td>
<td>Neuralynx (www.neuralynx.com)</td>
<td>EIB-81</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>micro-drive screws</td>
<td>Material</td>
<td>Advanced Machining and Tooling (www.amtmfg.com)</td>
<td>&nbsp;</td>
<td>Custom made screws with M1.2x0.25 threads (1.2mm major diameter; 0.25 mm thread pitch) </td>
</tr>
<tr>
<td>'Tap-Ease' tapping lubricant </td>
<td>Tool</td>
<td>AGS Company</td>
<td>TA-2</td>
<td>Available from MSC Industrial Supply (www.mscdirect.com)</td>
</tr>
<tr>
<td>Polyimide tubing </td>
<td>Material</td>
<td>IWG High Performance Conductors (www.iwghpc.com)</td>
<td>&nbsp;</td>
<td>Sizes:
30 Ga (outer diam: 0.0071", inner diam: 0.0116") 
5 mil (nominal outer diam: 0.0055", wall: 0.0010") </td>
</tr>
<tr>
<td>Cordless drill/driver </td>
<td>Tool</td>
<td>DeWalt (www.dewalt.com)</td>
<td>DC750KA </td>
<td>Any drill/driver with low-speed setting will do.</td>
</tr>
<tr>
<td>Variable-Speed Rotary Tool Kit with Flex-Shaft </td>
<td>Tool</td>
<td>Dremel (www.dremel.com)</td>
<td>3956-02</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Razor blades </td>
<td>Tool</td>
<td>VWR (www.vwr.com)</td>
<td>55411-050</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Watch glass </td>
<td>Tool</td>
<td>VWR</td>
<td>66112-107</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Tap for custom screws</td>
<td>Tool</td>
<td>Balax</td>
<td>01302</td>
<td>M1.2x0.25 Thredfloer thread-forming tap. Available from MSC Industrial Supply.</td>
</tr>
<tr>
<td>Taps</td>
<td>Tool</td>
<td>Small Parts</td>
<td>HSBT-0172, HSBT-0080 </td>
<td>1-72, 0-80 bottoming taps</td>
</tr>
<tr>
<td>Pin vise</td>
<td>Tool</td>
<td>Vargus</td>
<td>3SHC1--I </td>
<td>To hold taps. Available from MSC Industrial Supply</td>
</tr>
<tr>
<td>Drill bits</td>
<td>Tool</td>
<td>Small Parts</td>
<td>&nbsp;</td>
<td>Sizes: 65, 61, 1.55mm</td>
</tr>
<tr>
<td>Benchtop vise</td>
<td>Tool</td>
<td>Panavise</td>
<td>301</td>
<td>Available from DigiKey (www.digikey.com).</td>
</tr>
<tr>
<td>No.2 Dumont forceps</td>
<td>Tool</td>
<td>Stoelting (www.stoeltingco.com)</td>
<td>52100-27</td>
<td>Used for inserting 20 Ga thin wall sleeves.</td>
</tr>
<tr>
<td>5-minute epoxy</td>
<td>Tool</td>
<td>Allied Electronics (www.alliedelec.com)</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Accu-Tek Carbofib Tip Tweezers</td>
<td>Tool</td>
<td>Aven (www.aveninc.com)</td>
<td>18768 (Pattern 304)</td>
<td>Used for handling polyimide tubing.</td>
</tr>
<tr>
<td>Micro Dissecting Scissors</td>
<td>Tool</td>
<td>Biomedical Research Instruments (www.biomedinstr.com)</td>
<td>25-1000</td>
<td>Used for cutting polyimide carrier tubes</td>
</tr>
<tr>
<td>Xcelite 378M Pliers</td>
<td>Tool</td>
<td>Newark</td>
<td>96F8903</td>
<td>Used for handling stainless steel tubing and for construction of custom screwdriver.</td>
</tr>
<tr>
<td>mini pin vise</td>
<td>Tool</td>
<td>MSC Industrial Supply (www.mscdirect.com)</td>
<td>00920314 </td>
<td>Used as a handle for custom made screwdriver.</td>
</tr>		
</tbody>
</table>

micro-drive array for chronic in vivo recording: drive fabrication

Chronic recording of large populations of neurons is a valuable technique for studying the function of neuronal circuits in awake behaving rats. Lightweight recording devices carrying a high density array of tetrodes allow for the simultaneous monitoring of the activity of tens to hundreds of individual neurons. Here we describe a protocol for the fabrication of a micro-drive array with twenty one independently movable micro-drives. This device has been used successfully to record from hippocampal and cortical neurons in our lab. We show how to prepare a custom designed, 3-D printed plastic base that will hold the micro-drives. We demonstrate how to construct the individual micro-drives and how to assemble the complete micro-drive array. Further preparation of the drive array for surgical implantation, such as the fabrication of tetrodes, loading of tetrodes into the drive array and gold-plating, is covered in a subsequent video article.

Watch this Scientific Journal Video about Micro-drive Array for Chronic in vivo Recording: Drive Fabrication at JoVE.com

Micro-drive Array for Chronic in vivo Recording: Drive Fabrication

In this protocol we demonstrate how to fabricate a micro-drive array for chronic electrophysiological recordings in rats.

Micro-drive Array for Chronic in vivo Recording: Drive Fabrication

Chronic recording of large populations of neurons is a valuable technique for studying the function of neuronal circuits in awake behaving rats. ...

Research

JoVE Journal

Biology

Population Replacement Strategies for Controlling Vector Populations and the Use of Wolbachia pipientis for Genetic Drive

In this video, Jason Rasgon discusses population replacement strategies to control vector-borne diseases such as malaria and dengue. "Population ...

Application of Light-cured Dental Adhesive Resin for Mounting Electrodes or Microdialysis Probes in Chronic Experiments

In chronic recording experiments, self-curing dental acrylic resins have been used as a mounting base of electrodes or microdialysis-probes. Since these ...

A Craniotomy Surgery Procedure for Chronic Brain Imaging

Imaging techniques are becoming increasingly important in the study brain function. Among them, two-photon laser scanning microscopy has emerged as an ...

Pressure-polishing Pipettes for Improved Patch-clamp Recording

Pressure-polishing is a method for shaping glass pipettes for patch-clamp recording.  We first developed this method for fabricating pipettes suitable for ...

Micro-drive Array for Chronic in vivo Recording: Tetrode Assembly

Micro-drive Array for Chronic in vivo Recording: Tetrode Assembly

The tetrode, a bundle of four electrodes, has proven to be a valuable tool for the simultaneous recording of multiple neurons in-vivo.  The differential ...

Electrophysiological Recording in the Drosophila Embryo

Electrophysiological Recording in the Drosophila Embryo

Drosophila is a premier genetic model for the study of both embryonic development and functional neuroscience. Traditionally, these fields are quite ...

In vivo-like Organotypic Murine Retinal Wholemount Culture

In vivo-like Organotypic Murine Retinal Wholemount Culture

Targeted ablations of genes and analysis of animal models is the classical strategy for enrolling specific retinal gene function. However, transgenic, ...

Ambulatory ECG Recording in Mice

Telemetric ECG recording in mice is essential to understanding the mechanisms behind arrhythmias, conduction disorders, and sudden cardiac death. Although ...

One-channel Cell-attached Patch-clamp Recording

En kanal Cell-festet Patch-clamp opptak

Ion channel proteins are universal devices for fast communication across biological membranes. The temporal signature of the ionic flux they generate ...