Name: primer extension capture: targeted sequence retrieval from heavily degraded dna sources
Uploaded: 2009-09-03T11:00:00
Duration: 15 min 28 s
Description: Watch this Scientific Journal Video about Primer Extension Capture: Targeted Sequence Retrieval from Heavily Degraded DNA Sources at JoVE.com

We thank M. Meyer for advice; The Croatian Academy of Sciences and Arts and the Berlin-Brandenburg Academy of Sciences for logistic and scientific support; and the Presidential Innovation Fund of the Max Planck Society for financial support. J.M.G. was supported by an NSF international postdoctoral fellowship (OISE-0754461). Sequences are deposited at the EBI nucleotide database with accession numbers: Neandertal 1 (Feldhofer 1) FM865407, Neandertal 2 (Feldhofer 2) FM865408, Sidron 1253 FM865409, Vindija 33.25 FM865410, Mezmaiskaya 1 FM865411

This method was used in the research reported in <a href="http://www.sciencemag.org/cgi/content/full/325/5938/318">Briggs et al., Science 325 (5938). 318-321 (2009)</a>.
Reagents required:
<ul>
 <li>AmpliTaq Gold DNA Polymerase </li>
 <li>10x GeneAmp PCR Buffer II </li>
 <li>MgCl2 25mM</li>
 <li>dNTP mix, 25 mM each</li>
 <li>BSA, 10 mg ml-1 in water </li>
 <li>Molecular biology-grade water</li>
 <li>EB buffer (supplied with MinElute PCR Purification kit); 10 mM Tris HCl, pH 8.5</li>
 <li>MinElute PCR Purification Kit</li>
 <li>M-270 streptavidin Dynabeads</li>
 <li>2x Binding and Wash (BW) buffer (2 M NaCl, 10 mM Tris-Cl, 1 mM EDTA, pH 8.0, 0.2% Tween 20)</li>
 <li>1x Binding and Wash (BW) buffer (2x BindWash buffer diluted 2X in water)</li>
 <li>Hot Wash (HW) buffer (2.5mM MgCl, 1X Taq Gold buffer, 0.1% Tween 20)</li>
</ul>
For manufacturer information regarding non-standard reagents and equipment see later table.
1) Library amplification
<ol>
<li>The DNA template here is a 454 library prepared from a low copy number DNA source as described in (Rohland and Hofreiter, 2007a, 2007b) and (Maricic and P&auml;&auml;bo, 2009). To amplify the whole library, prepare the following PCR mix:
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
 <tr>
 <td>Reagent</td>
 <td>&mu;l per reaction</td>
 </tr>
 <tr>
 <td>Water</td>
 <td>45</td>
 </tr>
 <tr>
 <td>10X Gene Amp PCR buffer II</td>
 <td>10</td>
 </tr>
 <tr>
 <td>MgCl2 (25mM)</td>
 <td>10</td>
 </tr>
 <tr>
 <td>BSA (10 mg / ml) </td>
 <td>2</td>
 </tr>
 <tr>
 <td>dNTPs (25 mM each)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>454 emPCR fwd primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>454 emPCR rvs primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>AmpliTaq Gold DNA polymerase (5 U / &mu;l)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>454 DNA library template </td>
 <td>25</td>
 </tr>
 <tr>
 <td>Total</td>
 <td>100</td>
 </tr>
 </tbody>
</table>
</li>
<li>Use the following PCR program in a Thermo cycler for 14 cycles amplification
<ol>
<li>95&deg;C 12min</li>
<li>95&deg;C 30s</li> 
<li>60&deg;C (or desired annealing temp) 1 min</li>
<li>72&deg;C 1 min</li>
<li>Go to 2 (x 13)</li>
<li>72&deg;C 5min</li>
<li>10&deg;C &#x221E;</li>
</ol>
</li>
<li>Purify the reaction over a Qiagen MinElute spin column according to the manufacturer's instructions. Elute in 50 &mu;l buffer EB.</li>
<li>Quantify the purified amplified product as well as an aliquot of the unamplified library with qPCR (Meyer et al., 2007). If the amplified product has more than 1 X 1012 copies per ul, reduce the amount of template in the following Primer Extension step to ensure that not more than 2 X 1012 copies are added to the Primer Extension reaction.</li>
</ol>
2 ) Primer Extension
<ol>
<li>Prepare a master mix for the required number of reactions.
<table border="0" cellspacing="0" cellpadding="0">
<tbody>
 <tr>
 <td>Reagent</td>
 <td>&mu;l per reaction</td>
 </tr>
 <tr>
 <td>Water</td>
 <td>45</td>
 </tr>
 <tr>
 <td>10X Gene Amp PCR buffer II</td>
 <td>10</td>
 </tr>
 <tr>
 <td>MgCl2 (25mM)</td>
 <td>10</td>
 </tr>
 <tr>
 <td>BSA (10 mg / ml) </td>
 <td>2</td>
 </tr>
 <tr>
 <td>dNTPs (25 mM each)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>454 emPCR fwd primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>454 emPCR rvs primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>AmpliTaq Gold DNA polymerase (5 U / &mu;l)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>454 DNA library template </td>
 <td>25</td>
 </tr>
 <tr>
 <td>Total</td>
 <td>100</td>
 </tr>
 </tbody>
</table>
</li>
<li>Run the following program in a Thermocycler for the single primer extension reaction:
<ol>
<li>95&deg;C 12min</li>
<li>60&deg;C (or your PEC primer annealing temp if different) 1 min</li>
<li>72&deg;C 5 min</li>
<li>72&deg;C forever! 
CRITICAL STEP Keep reaction after extension at 72 &deg;C. Then directly pipette 150ul PBI or PB buffer for QIAGEN MinElute purification into the tubes before removing from the heat block. This is important to avoid non-specific primer annealing and capture as the mixture cools.
</li>
</ol>
</li>
<li>Purify the reaction over a Qiagen MinElute spin column, according to the manufacturer's instructions. Elute in 50 &mu;l EB.</li>
</ol>
3) Extension Product Capture
<ol>
<li>Resuspend stock solution of M-270 beads by vortexing. Take out 25 &mu;l bead suspension per sample. Wash the beads twice with 500ul 2x BW buffer and resuspend in 25 &mu;l 2xBW buffer per sample.</li>
<li>Add 25 &mu;l eluate from step 2.3 to 25 &mu;l bead suspension from step 3.1. Mix then rotate for 15 min at room temperature. 
 Recommended: keep remaining 5 ul of the eluate from step 2.3 for qPCR quantification. </li>
<li>Transfer the whole mixture to a fresh 1.5ml tube (this helps to reduce carryover of non-target library fragments). Pellet the supernatant using the Magnetic particle collector (MPC) and discard the supernatant.</li>
<li>Wash 5 times with 500 &mu;l 1xBW buffer (many washes help to remove as much background as possible). After the last washing step, spin down briefly and remove the last traces of supernatant.</li>
<li>Add 500&mu;l 1x Hot Wash (HW) buffer. Shake for 2 min at 65 &deg;C (or 5C above the PEC primer Tm) on a thermal block. Remove the supernatant quickly after this, to minimize cooling down. (This step is to remove background fragments still associated with the PEC primers but not actually extended on during the extension step). Remove the last traces of supernatant.</li>
<li>Resuspend the bead pellet in 30 &mu;l EB buffer. Transfer the whole mixture to a fresh 1.5ml tube (this helps to reduce carryover of non-target library fragments). Incubate at 95 &deg;C for 3 minutes in a thermal cycler for elution. Place in the MPC and remove the supernatant, taking care to leave the beads behind.</li>
</ol>
4) Capture Product Amplification
<ol>
<li>Prepare a PCR master mix for the required number of samples.
<table border="1" cellspacing="0" cellpadding="0">
<tbody>
 <tr>
 <td>Reagent</td>
 <td>&mu;l per reaction</td>
 </tr>
 <tr>
 <td>Water</td>
 <td>45</td>
 </tr>
 <tr>
 <td>10X Gene Amp PCR buffer II</td>
 <td>10</td>
 </tr>
 <tr>
 <td>MgCl2 (25mM)</td>
 <td>10</td>
 </tr>
 <tr>
 <td>BSA (10 mg / ml) </td>
 <td>2</td>
 </tr>
 <tr>
 <td>dNTPs (25 mM each)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>454 emPCR fwd primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>454 emPCR rvs primer/10uM</td>
 <td>3</td>
 </tr>
 <tr>
 <td>AmpliTaq Gold DNA polymerase (5 U / &mu;l)</td>
 <td>1</td>
 </tr>
 <tr>
 <td>Eluted capture product </td>
 <td>25</td>
 </tr>
 <tr>
 <td>Total</td>
 <td>100</td>
 </tr>
</tbody>
</table>
</li>
<li>Use the following PCR program in a Thermo cycler for 14 cycles amplification:
<ol>
<li>95&deg;C 12min</li>
<li>95&deg;C 30s</li>
<li>60&deg;C (or desired annealing temp) 1 min</li>
<li>72&deg;C 1 min</li>
<li>Go to 2 (x 13)</li> 
<li>72&deg;C 5min</li>
<li>10&deg;C &#8734;</li>
</ol>
</li>
<li>Purify the reaction over a Qiagen MinElute silica spin column according to the manufacturer's instructions. Elute in 50 &mu;l EB buffer. The product can be now used either for a second round of capture, starting at step 2.1, or entered directly into the 454 emulsion PCR protocol, for sequencing.</li>
</ol>
Representative Results:
It is strongly recommended when starting out with the PEC protocol to perform first a capture reaction where a small amount of a 'positive control target sequence' (e.g. a ~100bp PCR product - 1 picogram is easily enough) is mixed in with the normal recommended amount of amplified 454 library template (see step 2.1), and capture is performed with a single PEC primer designed to capture the positive control product. If this control reaction is performed, qPCR with both positive control-specific and 454 adaptor-specific primer pairs can be used to quantify the amount of 'control target' versus background in the purified primer extension reaction (1.3), primer extension product (2.3) and eluted bead capture product (3.6). In this way, both the effectiveness of background removal ("specificity") and the efficiency of target recovery ("sensitivity") in your experimental conditions can be directly measured.
A successful PEC protocol normally has the following properties &#x2013;
Sensitivity (measured by amount of control target retained through the protocol): 
 Total amount of control target in eluted bead capture product (3.6) =~ 1-20% of total amount in purified primer extension reaction (2.3).
Background (measured by 454 emPCR primer pair): 
 Total amount of background in eluted bead capture product (3.6) &lt; 0.01% of total amount in purified primer extension reaction (2.3).
If there is less than 1% of the target remaining in the final product, the primer extension step may have been unsuccessful and should be investigated.
If there is much more than 0.01% of the background remaining in the final products, the washing steps may have been incorrectly performed and should be investigated.

<ol>
	<li>Briggs, A. W., Good, J. M., Green, R. E., Krause, J., Maricic, T., Stenzel, U., Lalueza-Fox, C., Rudan, P., Brajkovic, D., Kucan, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Targeted+retrieval+and+analysis+of+five+Neandertal+mtDNA+genomes.">Targeted retrieval and analysis of five Neandertal mtDNA genomes.</a> Science. 325 (5938), 318-321 (2009).</li><li>Rohland, N., Hofreiter, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+and+optimization+of+ancient+DNA+extraction.">Comparison and optimization of ancient DNA extraction.</a> Biotechniques. 42 (3), 343-352 (2007).</li><li>Rohland, N., Hofreiter, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ancient+DNA+extraction+from+bones+and+teeth.">Ancient DNA extraction from bones and teeth.</a> Nat Protoc. 2 (7), 1756-1762 (2007).</li><li>Maricic, T., P&#228;&#228;bo, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimization+of+454+sequencing+library+preparation+from+small+amounts+of+DNA+permits+sequence+determination+of+both+DNA+strands.">Optimization of 454 sequencing library preparation from small amounts of DNA permits sequence determination of both DNA strands.</a> Biotechniques. 46 (1), 51-57 (2009).</li><li>Meyer, M., AW, B. r. i. g. g. s., Maricic, T., Hober, B., Hoffner, B., Krause, J., Weihmann, A., Paabo, S., Hofreiter, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+micrograms+to+picograms:+quantitative+PCR+reduces+the+material+demands+of+high-throughput+sequencing.">From micrograms to picograms: quantitative PCR reduces the material demands of high-throughput sequencing.</a> Nucleic Acids Res. 36 (1), e5-e5 (2007).</li></ol>

The authors have nothing to disclose.

The PEC method is simple, quick, sensitive and specific. Therefore we the authors envisage multiple applications outside ancient DNA, such as capture of small RNA fragments from an RNA library, interrogation of structural variation in a pooled sample or capture of 16S (or other loci) diversity from a metagenomic sample. One point to mention is that the sensitivity of capture becomes lower as the number of PEC primers in a multiplex capture reaction increases. PEC is therefore not ideally suited for capture of very large (e.g. a megabase or more) capture regions, but is extremely well suited for capture of small target regions or even SNP positions from many individuals in a rapid fashion.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>AmpliTaq Gold polymerase with GeneAmp PCR buffer II and MgCl2</td>
<td>&nbsp;</td>
<td>Applied Biosystems</td>
<td>N8080241</td>
<td>&nbsp;</td>
<tr>
<td>QIAGEN MinElute PCR purification kit</td>
<td>&nbsp;</td>
<td>Qiagen</td>
<td>28004</td>
<td>&nbsp;</td>
<tr>
<td>M-270 streptavidin beads</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>653.05</td>
<td>&nbsp;</td>
<tr>
<td>Tween-20</td>
<td>&nbsp;</td>
<td>Sigma-Aldrich</td>
<td>P2287</td>
<td>&nbsp;</td>
<tr>
<td>DynaMag-2 magnetic particle separator</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>120.02D</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

primer extension capture: targeted sequence retrieval from heavily degraded dna sources

We present a method of targeted DNA sequence retrieval from DNA sources which are heavily degraded and contaminated with microbial DNA, as is typical of ancient bones. The method greatly reduces sample destruction and sequencing demands relative to direct PCR or shotgun sequencing approaches. We used this method to reconstruct the complete mitochondrial DNA (mtDNA) genomes of five Neandertals from across their geographic range. The mtDNA genetic diversity of the late Neandertals was approximately three times lower than that of contemporary modern humans. Together with analyses of mtDNA protein evolution, these data suggest that the long-term effective population size of Neandertals was smaller than that of modern humans and extant great apes.

Watch this Scientific Journal Video about Primer Extension Capture: Targeted Sequence Retrieval from Heavily Degraded DNA Sources at JoVE.com

Primer Extension Capture: Targeted Sequence Retrieval from Heavily Degraded DNA Sources

We present a method of targeted ancient DNA sequence retrieval, which we used to reconstruct the complete mitochondrial genomes of five Neandertal individuals. Comparison of these sequences with present day humans suggests that Neandertals had a long term low effective population size.

We present a method of targeted DNA sequence retrieval from DNA sources which are heavily degraded and contaminated with microbial DNA, as is typical of ...

Research

JoVE Journal

Biology

Retrieval of Mouse Oocytes

To date, only a few studies have reported successful manipulations of Peromyscus embryogenesis or reproductive biology.  Together with the Peromyscus ...

Proboscis Extension Response (PER) Assay in Drosophila

Proboscis Extension Response PER Assay in Drosophila

Proboscis extension response (PER) is a taste behavior assay that has been used in flies as well as in honeybees.
On the surface of the fly's mouth ...

Isolation of Genomic DNA from Mouse Tails

Primer-Free Aptamer Selection Using A Random DNA Library

Aptamers are highly structured oligonucleotides (DNA or RNA) that can bind to targets with affinities comparable to antibodies 1. They are identified ...

Genomic MRI - a Public Resource for Studying Sequence Patterns within Genomic DNA

Non-coding genomic regions in complex eukaryotes, including intergenic areas, introns, and untranslated segments of exons, are profoundly non-random in ...

Extraction of High Molecular Weight DNA from Microbial Mats

Successful and accurate analysis and interpretation of metagenomic data is dependent upon the efficient extraction  of high-quality, high molecular weight ...

Selective Capture of 5-hydroxymethylcytosine from Genomic DNA

Selektiv opsamling af 5-hydroxymethylcytosine fra genomisk DNA

5-methylcytosine (5-mC) constitutes ~2-8% of the total cytosines in human genomic DNA and impacts a broad range of biological functions, including gene ...

Real-time Imaging of Single Engineered RNA Transcripts in Living Cells Using Ratiometric Bimolecular Beacons

Real-time Imaging af Single Engineered RNA-transkripter i levende celler Brug Ratiometrisk bimolekylær Beacons

The growing realization that both the temporal and spatial regulation of gene expression can have important consequences on cell function has led to the ...

Fluorescence Based Primer Extension Technique to Determine Transcriptional Starting Points and Cleavage Sites of RNases In Vivo

Fluorescence Based Primer Extension Technique to Determine Transcriptional Starting Points and Cleavage Sites of RNases In Vivo

Fluorescens Baseret Primer Extension teknik til at bestemme Transkriptionelle udgangspunkter og kløvningsstederne RNaser<em&gt; In Vivo</em

Fluorescence based primer extension (FPE) is a molecular method to determine transcriptional starting points or processing sites of RNA molecules. This is ...

Targeted DNA Methylation Analysis by Next-generation Sequencing

Målrettet DNA methyleringsanalyse by Next generation Sequencing

The role of epigenetic processes in the control of gene expression has been known for a number of years. DNA methylation at cytosine residues is of ...