Free jets describe the flow of liquid exiting a reservoir through an opening into the atmosphere without resistance. The velocity (v) of the liquid jet is derived using Bernoulli's principle and expressed as:
Where h is the height of the liquid above the opening. This relationship assumes atmospheric pressure at both the reservoir surface and the jet exit. The fluid column's height governs the fluid's velocity at the nozzle in a reservoir, where the fluid's potential energy converts into kinetic energy during flow.
The phenomenon of vena contracta occurs when the liquid exits through a sharp-edged orifice, causing the jet diameter dj to be smaller than the nozzle diameter do. This occurs because the fluid streamlines cannot follow the abrupt edges, creating a contracted flow region. The contraction coefficient is the ratio of the jet's cross-sectional area at the vena contracta to the nozzle's cross-sectional area, quantifying the degree of jet contraction. This parameter is influenced by the nozzle's geometry, with various designs such as knife-edge, sharp-edge, well-rounded, and re-entrant nozzles producing distinct flow patterns and contraction characteristics. For a well-rounded nozzle, Cc = 1.0, while sharp or knife-edged orifices reduce Cc to approximately 0.61. Re-entrant nozzles exhibit even lower values.
These flow characteristics and contraction effects are critical in engineering applications involving liquid discharge, from reservoirs to industrial nozzles.
From Chapter 16:
Now Playing
Fluid Dynamics
54 Views
Fluid Dynamics
468 Views
Fluid Dynamics
413 Views
Fluid Dynamics
444 Views
Fluid Dynamics
103 Views
Fluid Dynamics
679 Views
Fluid Dynamics
455 Views
Fluid Dynamics
62 Views
Copyright © 2025 MyJoVE Corporation. All rights reserved