Till att börja med, inuti ett dragskåp, placera ett täckglas med det tejpade grafenarket på en hemlagad centrifugering. Använd skyddsglasögon för att tillsätta två droppar metylmetakrylat, eller MMA, på grafenarket och börja omedelbart snurra med maximal hastighet. Medan du snurrar, tillsätt ytterligare två droppar i mitten och centrifugera i en minut.
Efter rengöring och torkning av tre kristalliserande rätter, häll 200 ml kloroform, aceton och isopropylalkohol i varje skål. Placera basen på clamping TEM gallerhållarblock i botten av den första skålen som innehåller 200 ml kloroform. Se till att den fenestrerade filmsidan är vänd uppåt, överför varje galler individuellt från gallerlådan till en brunn i gallerhållarblocket.
Täck skålen med aluminiumfolie och lägg den på en orbital shaker för att försiktigt skaka i 30 minuter. Placera sedan metalllocket på gallerhållarblocket för att säkra gallren för överföring till nästa kristalliseringsskål. Använd en böjd gaffel och en lång pincett, lyft försiktigt ut gallerhållarblocket ur skålen och placera det i botten av den andra skålen som innehåller 200 ml aceton.
Ta bort locket från gallerhållarblocket och skaka det försiktigt på en orbital shaker. Efter 30 minuter lägger du locket på gallerhållarblocket och överför det till en skål som innehåller 200 ml isopropylalkohol för att avlägsna acetonrester. Ta bort locket från gallerhållarblocket och skaka det försiktigt i 20 minuter.
Överför gallren individuellt med den fenestrerade filmsidan uppåt från gallerhållarblocket till en petriskål av glas täckt med läskpapper.