Name: concentration determination of nucleic acids and proteins using the micro-volume bio-spec nano spectrophotometer
Uploaded: 2011-02-17T18:00:00
Duration: 6 min 15 s
Description: Watch this Scientific Journal Video about Concentration Determination of Nucleic Acids and Proteins Using the Micro-volume Bio-spec Nano Spectrophotometer at JoVE.com

1. Procedure for DNA Quantitation
<ol>
 <li>Turn ON the instrument.</li>
 <li>Open the BioSpec-nano software from the PC desktop.</li>
 <li>Click on the Simple Nucleic Acid -dsDNA tab (Figure 1).</li>
 <li>The software will establish communication with the instrument and run an initialization sequence. This verifies that the instrument is performing according to specifications.</li>
 <li>Select 0.7 or 0.2 mm on the pathlength slider. This selects the pathlength and all calculations are based on the pathlength selected.</li>
 <li>Next in BioSpec-nano software click Setup-Autowiping setup. Select 1 or 2.</li>
 <li>Pipette 2 &mu;L (for 0.7 mm) H2O or buffer on the pedestal.</li>
 <li>Click blank or F6 for blank measurement. Every time a new pathlength is selected it is necessary to record a blank.</li>
 <li>Pipette 2 &mu;L of sample on the pedestal.</li>
 <li>Click Start in the software or push the start button on the instrument. The Upper window moves to make contact with the sample droplet. Xenon flashes can be observed.</li>
 <li>Repeat the same sample 3 times to determine reproducibility.</li>
 <li>All data recorded is saved as .bud file.</li>
 <li>To save as a .pdf or .csv file click save pdf/csv or F9. Results can also be saved as a .csv file by using the appropriate selection in the save tab. </li>
</ol>
2. Protocol for Protein Quantitation
<ol>
 <li>Select Protein Quantitation tab (Figure 2).</li>
 <li>Enter the extinction coefficient e280, if known.</li>
 <li>If e280 is not known calculate it using e280Calc.</li>
 <li>Select 0.7 or 0.2 mm on the pathlength slider.</li>
 <li>Click Setup-Autowiping setup. Select 2 or above.</li>
 <li>Pipette 3 &mu;L (for 0.2 mm) H2O or buffer on the pedestal.</li>
 <li>Click blank or F6 for blank measurement.</li>
 <li>Pipette 3 &mu;L of protein sample on the pedestal.</li>
 <li>Click Start in the software or push the start button on the instrument.</li>
 <li>Repeat the same sample 3 times to determine reproducibility.</li>
 <li>All data recorded is saved as .bud file</li>
 <li>To save as a .pdf or .csv file click save pdf/csv or F9.</li>
</ol>
3. Representative Results:
1. Results for DNA Quantitation
Figure 3 shows the data from measurements on a typical double stranded DNA sample. The concentration and OD 260/280 ratio calculated are also shown. Figure 4 contains reproducibility test results for DNA quantitation. The data in Figures 3 and 4 shows results are highly reproducible as evident from the low relative standard deviation of 0.26%. 
Note 1: 
Inaccuracy in DNA quantitation can arise from the presence of buffer components which may absorb in the UV region. It is also necessary to use a homogenous sample solution. As the amount of sample being pipetted is only 1-2 &mu;L, careful pipetting of accurate volumes without introduction of any bubbles is required.
2. Results for Protein Quantitation
Figure 5 represents protein concentration analysis for BSA. The &mu;g/ mL protein concentration is based on the e280 value. Figure 6 shows reproducibility analysis. It is evident from the relative standard deviation of 0.51% that the BioSpec-nano measures concentration precisely - not only for DNA but also for proteins.
Note 2: Factors affecting protein concentration 
Accurate concentration determination of protein is feasible when there are minimum effects from instability caused by pH, buffers, temperature, or additives. Most purified protein goes through various steps of processing; hence it is possible that the protein may contain surfactants or other additives that may interfere with droplet formation. For such samples, using the 5 mm pathlength quartz cell is highly recommended.
<img src="/files/ftp_upload/2699/2699fig1.jpg" alt="Figure 1" /> 
Figure 1. Analyte selection window for double stranded DNA quantitation
<img src="/files/ftp_upload/2699/2699fig2.jpg" alt="Figure 2" /> 
Figure 2. Analyte selection window for non labeled protein quantitation
<img src="/files/ftp_upload/2699/2699fig3.jpg" alt="Figure 3" /> 
Figure 3. Representative data for DNA quantitation
<img src="/files/ftp_upload/2699/2699fig4.jpg" alt="Figure 4" /> 
Figure 4. Reproducibility data for DNA quantitation
<img src="/files/ftp_upload/2699/2699fig5.jpg" alt="Figure 5" /> 
Figure 5. Representative data for protein quantitation
<img src="/files/ftp_upload/2699/2699fig6.jpg" alt="Figure 6" /> 
Figure 6. Reproducibility data for protein quantitation

<ol>
	<li>Aisubel, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Short Protocols in Molecular Biology. , (1999).</li><li>Pace, C. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=How+to+measure+and+predict+molar+absorption+coefficient+of+a+protein.">How to measure and predict molar absorption coefficient of a protein.</a> Protein Science. 4, 2411-2423 .</li></ol>

Suja Sukumaran, PhD is an employee of Shimadzu who makes the instrument featured in this article.

The BioSpec-nano has been engineered to solve current issues inherent in DNA quantitation methods, such as inconsistent results and tedious manual labor. Each measurement takes just 3 seconds, allowing an experienced molecular biologist to analyze about 3-6 multiple samples in a minute. The unique wiper feature not only improves the throughput of measurement, it also eliminates the need for manual cleaning of the pedestals, resulting in negligible carryover between measurements. Furthermore, tests using just 2 wipes for DNA samples containing 1000 ng/&mu;L, indicated carryover less than 2 ng/&mu;L.
The availability of a 5 mm pathlength cell provides an option to analyze dilute nucleic acid and protein samples and extends the use of this instrument for other applications.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>BioSpec-nano</td>
<td>&nbsp;</td>
<td>Shimadzu</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Calf Thymus DNA</td>
<td>&nbsp;</td>
<td>Sigma Aldrich</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Bovine Serum Albumin</td>
<td>&nbsp;</td>
<td>Sigma Aldrich</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

concentration determination of nucleic acids and proteins using the micro-volume bio-spec nano spectrophotometer

Nucleic Acid quantitation procedures have advanced significantly in the last three decades. More and more, molecular biologists require consistent small-volume analysis of nucleic acid samples for their experiments. The BioSpec-nano provides a potential solution to the problems of inaccurate, non-reproducible results, inherent in current DNA quantitation methods, via specialized optics and a sensitive PDA detector. The BioSpec-nano also has automated functionality such that mounting, measurement, and cleaning are done by the instrument, thereby eliminating tedious, repetitive, and inconsistent placement of the fiber optic element and manual cleaning.
In this study, data is presented on the quantification of DNA and protein, as well as on measurement reproducibility and accuracy. Automated sample contact and rapid scanning allows measurement in three seconds, resulting in excellent throughput. Data analysis is carried out using the built-in features of the software. The formula used for calculating DNA concentration is:
Sample Concentration = DF &middot; (OD260-OD320)&middot; NACF (1)
Where DF = sample dilution factor and NACF = nucleic acid concentration factor.
The Nucleic Acid concentration factor is set in accordance with the analyte selected1.
Protein concentration results can be expressed as &mu;g/ mL or as moles/L by entering e280 and molecular weight values respectively. When residue values for Tyr, Trp and Cysteine (S-S bond) are entered in the e280Calc tab, the extinction coefficient values are calculated as e280 = 5500 x (Trp residues) + 1490 x (Tyr residues) + 125 x (cysteine S-S bond). The e280 value is used by the software for concentration calculation.
In addition to concentration determination of nucleic acids and protein, the BioSpec-nano can be used as an ultra micro-volume spectrophotometer for many other analytes or as a standard spectrophotometer using 5 mm pathlength cells.

Watch this Scientific Journal Video about Concentration Determination of Nucleic Acids and Proteins Using the Micro-volume Bio-spec Nano Spectrophotometer at JoVE.com

Concentration Determination of Nucleic Acids and Proteins Using the Micro-volume Bio-spec Nano Spectrophotometer

This communication presents data on the accuracy and reproducibility of the BioSpec-nano UV-VIS spectrophotometer for dsDNA and protein quantitation. Even with ultra-small volumes (1 to 2 L), reproducibility is excellent, while the automated wiping function improves throughput and results in minimal carryover for more precise results.

Nucleic Acid quantitation procedures have advanced significantly in the last three decades.  More and more, molecular biologists require consistent ...

Research

JoVE Journal

Biology

Microvolume Protein Concentration Determination using the NanoDrop 2000c Spectrophotometer

Traditional spectrophotometry requires placing samples into cuvettes or capillaries. This is often impractical due to the limited sample volumes often ...

Crystallizing Membrane Proteins for Structure Determination using Lipidic Mesophases

A detailed protocol for crystallizing membrane proteins by using lipidic mesophases is described. This method has variously been referred to as the ...

The Importance of Correct Protein Concentration for Kinetics and Affinity Determination in Structure-function Analysis 

In this study, we explore the interaction between the bovine cysteine protease inhibitor cystatin B and a catalytically inactive form of papain (Fig. 1), ...

Quantification of dsDNA using the Hitachi F-7000 Fluorescence Spectrophotometer and PicoGreen Dye

Quantification of DNA, especially in small concentrations, is an important task with a wide range of biological applications including standard molecular ...

NanoDrop Microvolume Quantitation of Nucleic Acids

Biomolecular assays are continually being developed that use progressively smaller amounts of material, often precluding the use of conventional ...

Analyzing and Building Nucleic Acid Structures with 3DNA

Analysere og Building nukleinsyrestrukturer med 3DNA

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic ...

Sequence-specific Labeling of Nucleic Acids and Proteins with Methyltransferases and Cofactor Analogues

Sekvens-specifik mærkning af nukleinsyrer og proteiner med methyltransferaser og cofaktor Analoger

S-Adenosyl-l-methionine (AdoMet or SAM)-dependent methyltransferases (MTase) catalyze the transfer of the activated methyl group from AdoMet to specific ...

Residue-specific Incorporation of Noncanonical Amino Acids into Model Proteins Using an Escherichia coli Cell-free Transcription-translation System

Residue-specific Incorporation of Noncanonical Amino Acids into Model Proteins Using an Escherichia coli Cell-free Transcription-translation System

Rest-specifikke Inkorporering af Noncanonical Aminosyrer i Model Proteiner Brug en<em&gt; Escherichia coli</em&gt; Cellefri transskription-translationssystem

The canonical set of amino acids leads to an exceptionally wide range of protein functionality. Nevertheless, the set of residues still imposes ...

Filtration Isolation of Nucleic Acids:  A Simple and Rapid DNA Extraction Method

Filtrering Isolering af nukleinsyrer: en enkel og hurtig DNA Extraction Method

FINA, filtration isolation of nucleic acids, is a novel extraction method which utilizes vertical filtration via a separation membrane and absorbent pad ...

Determination of Sialic Acids in Liver and Milk Samples of Wild-type and CMAH Knock-out Mice.

Determination of Sialic Acids in Liver and Milk Samples of Wild-type and CMAH Knock-out Mice.

Bestemmelse af sialinsyrer i lever- og mælkeprøver af vildtype og<em&gt; CMAH</em&gt; Knock-out Mus.

CMAH (cytidine monophosphate-N-acetylneuraminic acid hydroxylase) is responsible for the oxidation of cytidine monophosphate-N-acetylneuraminic acids in ...