Name: prediction of hiv-1 coreceptor usage (tropism) by sequence analysis using a genotypic approach
Uploaded: 2011-12-01T13:00:00
Duration: 7 min 6 s
Description: Watch this Scientific Journal Video about Prediction of HIV-1 Coreceptor Usage Tropism by Sequence Analysis using a Genotypic Approach at JoVE.com

The authors are funded from the Corus, MedSys Cell Entry, CHAIN and Resina projects.

The protocol is summarized in Fig. 4.
1. Collection of blood samples
<ol>
 <li>Collect at least 3 ml blood in EDTA tubes at the clinical site.</li>
 <li>The samples can be stored up to a week at 4&deg;C.</li>
 <li>Send the EDTA-blood samples as soon as possible to the laboratory by ordinary mail.</li>
</ol>
2. Isolation of HIV RNA and/or DNA
<ol>
 <li>Obtain viral RNA and/or DNA from 1000 &mu;l whole blood, serum or plasma, using the MagNA Pure Compact Nucleic Acid Isolation I kit I and the MagNA Pure Compact System.</li>
 <li>Elute the gained RNA or DNA in 50 &mu;l TE buffer. Alternatively, other nucleic acids purification procedures may be used.</li>
</ol>
3. Amplification of the env region
Amplify the env region (Figs. 2 and 4) from either plasma RNA or proviral DNA. A 1245 bp-long product, comprising the majority of the Env protein (nt 6556-7811 according to HXB2) is generated.
<ol>
 <li>RNA samples: RT-PCR reaction
 <ol>
 <li>Viral RNA presents a very complex secondary structure (Fig. 4) that may hinder the RT reaction. To avoid this problem, incubate 10 &mu;l RNA at 65&deg;C for 10 minutes (already in the PCR tube and in the PCR machine) and then reduce the temperature to 50&deg;C.</li>
 <li>Add 40 &mu;l of the PCR Master Mix including the primers Env-F and Env-R.
 Master Mix for RT-PCR In-House-System: 
 <table border="1">
 <tbody>
 <tr>
 <td>&nbsp;</td>
 <td>volume/reaction (&mu;l)</td>
 <td>final concentration</td>
 </tr>
 <tr>
 <td>RNase-free H2O</td>
 <td>14.4</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>5x Buffer (Qiagen OneStep RT-PCR Kit)</td>
 <td>10</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>5x Q-Solution</td>
 <td>10</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>dNTP Mix (10 mM each)</td>
 <td>2</td>
 <td>400 &mu;M of each dNTP</td>
 </tr>
 <tr>
 <td>Enzym-Mix (Qiagen OneStep RT-PCR Kit)</td>
 <td>2</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>Primer Env-F (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 <tr>
 <td>Primer Env-R (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 <tr>
 <td>RNase Inhibitor (RNasin)</td>
 <td>1</td>
 <td>5 units/reaction</td>
 </tr>
 </tbody>
 </table>
 Env-F: 5'- CAAAGCCTAAAGCCATGTGTAAA -3' (nt 6556&rarr;6586 according to HXB2)
 Env-R: 5'- AGTGCTTCCTGCTGCTCCTAAGAACCC -3' (nt 7785&larr;7811)</li>
 <li>Run the RT reaction at 50&deg;C for 30 minutes.</li>
 <li>Run the first PCR as follows:
 
 <table border="1">
 <tbody>
 <tr>
 <td>95&deg;C, 15min</td>
 <td>1 x</td>
 </tr>
 <tr>
 <td>95&deg;C, 30 sec 
 50&deg;C, 30 sec 
 72&deg;C, 2 min</td>
 <td>1 x</td>
 </tr>
 <tr>
 <td>95&deg;C, 30 sec 
 56&deg;C, 30 sec 
 72&deg;C, 2 min</td>
 <td>38 x</td>
 </tr>
 <tr>
 <td>72&deg;C, 10 min 
 4&deg;C &infin;</td>
 <td>&nbsp;</td>
 </tr>
 </tbody>
 </table>
 </li>
 </ol>
 </li>
 <li>DNA samples: PCR reaction
 For proviral DNA samples, no initial RT reaction is needed, and the PCR reaction can directly start.
 <ol>
 <li>Add 40 &mu;l of PCR Master Mix to 10 &mu;l of provial DNA. 
 Master Mix for PCR In-House-System: 
 <table border="1">
 <tbody>
 <tr>
 <td>&nbsp;</td>
 <td>volume/reaction (&mu;l)</td>
 <td>final concentration</td>
 </tr>
 <tr>
 <td>RNase-free H2O</td>
 <td>15.4</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>5x Buffer (HotStarTaq DNA Polymerase)</td>
 <td>10</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>5x Q-Solution</td>
 <td>10</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>dNTP Mix (10 mM each)</td>
 <td>2</td>
 <td>400 &mu;M of each dNTP</td>
 </tr>
 <tr>
 <td>Enzym-Mix (HotStarTaq DNA Polymerase)</td>
 <td>2</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>Primer Env-F (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 <tr>
 <td>Primer Env-R (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 </tbody>
 </table>
 Env-F: 5'- CAAAGCCTAAAGCCATGTGTAAA -3' (nt 6556&rarr;6586)
 Env-R: 5'- AGTGCTTCCTGCTGCTCCTAAGAACCC -3' (nt 7785&larr;7811)</li>
 <li>Run the PCR conditions as previously described for RNA samples (Step 3.1.4).</li>
 </ol>
 </li>
</ol>
4. Amplification of the V3 region: nested PCR
<ol>
 <li>For the nested PCR, use 5 &mu;l from the first PCR reaction (without previous analysis in agarose gel) as template and add 95 &mu;l of PCR Master Mix.
 Master Mix for Nested-In-House PCR
 <table border="1">
 <tbody>
 <tr>
 <td>&nbsp;</td>
 <td>volume/reaction (&mu;l)</td>
 <td>final concentration</td>
 </tr>
 <tr>
 <td>H2O</td>
 <td>61.9</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>10x PCR Buffer</td>
 <td>10</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>5x Q-Solution</td>
 <td>20</td>
 <td>1x</td>
 </tr>
 <tr>
 <td>dNTP Mix (10 mM each)</td>
 <td>2</td>
 <td>200 &mu;M of each dNTP</td>
 </tr>
 <tr>
 <td>Primer Env-2F (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 <tr>
 <td>Primer Env-2R (100 &mu;M)</td>
 <td>0.3</td>
 <td>0.6 &mu;M</td>
 </tr>
 <tr>
 <td>HotStarTaq DNA Polymerase</td>
 <td>0.5</td>
 <td>2,5 units/reaction</td>
 </tr>
 </tbody>
 </table>
 Env-2F: 5'- GTCCAAAGGTATCCTTTGAGCCAATTC -3' (nt 6838&rarr;6864)
 Env-2R: 5'- CACCACTCTTCTCTTTGCCTTGGTGGGTGC -3' (nt 7712&larr;7742)</li>
 <li>Run the PCR as follows:
 <table border="0">
 <tbody>
 <tr>
 <td> 
 93&deg;C, 15min</td>
 <td>1 x</td>
 </tr>
 <tr>
 <td>95&deg;C, 30 sec 
 50&deg;C, 30 sec 
 72&deg;C, 90 sec</td>
 <td>1 x</td>
 </tr>
 <tr>
 <td>95&deg;C, 30 sec 
 56&deg;C, 30 sec 
 72&deg;C, 90 sec</td>
 <td>43 x</td>
 </tr>
 <tr>
 <td>72&deg;C, 10 min 
 4&deg;C &infin;</td>
 <td>&nbsp;</td>
 </tr>
 </tbody>
 </table>
 </li>
 <li>Analyze the PCR product on a 1% agarose gel (Fig. 4). The expected product is 902 bp-long.</li>
 <li>Purification of the sequencing samples.
 <ol>
 <li>Purify the PCR product with the Qiagen PCR-Purification kit, using the protocol, solutions and micro-columns provided by the supplier. Elute in 30-100 &mu;l PE buffer, depending on band intensity.</li>
 <li>Alternatively, the samples can be purified using Exonuclease I and Fast AP (Thermo alkaline phosphatase). For this purpose, add 6 &mu;l Exo-AP Mix to 15 &mu;l PCR product and incubate 15 minutes at 37&deg;C.
 <table border="1">
 <tbody>
 <tr>
 <td>580 &mu;l H2O</td>
 </tr>
 <tr>
 <td>66 &mu;l fast AP</td>
 </tr>
 <tr>
 <td>13.4 &mu;l Exo I</td>
 </tr>
 </tbody>
 </table>
 </li>
 </ol>
 </li>
</ol>
5. Sequence reaction of the V3 amplicon
<ol>
 <li>The sequence reaction consists of a PCR reaction using only one of the following primers:
 Env-2: 5'- GTACAATGYACACATGGAATTAGGC -3 (nt 6959&rarr;6980) 
 Env-5: 5'- AAAATTCCCCTCCACAATTA - 3' (nt 7352&larr;7371) 
 Env-6: 5'- GGCCAGTAGTATCAACTCAAC - 3' (nt 6979&rarr;7000) 
 Env-7: 5'- TGTCCACTGATGGGAGGGGC - 3' (nt 7530&larr;7549) 
 Env-10: 5' - GCAGAATAAAACAAATTATAAACATGTGGC - 3' (nt 7478&larr;7507) 
 Env-11: 5' - TACATTGCTTTTCCTACTTTCTGCCAC - 3' (nt 7638&larr;7664) 
 First choice primers are: Env-2, Env-6 or Env-7, Env-11</li>
 <li>Use 1 &mu;l from the purified V3 amplicon as template and add 9 &mu;l of PCR master-mix.
 Sequencing Master Mix:
 <table border="1">
 <tbody>
 <tr>
 <td>4 &mu;l sequence mix (HIV-Genotyping Kit)</td>
 </tr>
 <tr>
 <td>4 &mu;l H2O</td>
 </tr>
 <tr>
 <td>1 &mu;l Primer (100 pmol/&mu;l)</td>
 </tr>
 </tbody>
 </table>
 </li>
 <li>Run the sequence reaction as follows:
 <table border="0">
 <tbody>
 <tr>
 <td>96&deg;C, 10 sec</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>50&deg;C, 10 sec</td>
 <td>36 x</td>
 </tr>
 <tr>
 <td>60&deg;C, 45 sec</td>
 <td>&nbsp;</td>
 </tr>
 <tr>
 <td>4&deg;C &infin;</td>
 <td>&nbsp;</td>
 </tr>
 </tbody>
 </table>
 </li>
</ol>
6. Purification of the sequencing samples
Purify sequences using Sephadex G-50 superfine.
<ol>
 <li>Fill the appropriate number of wells in the "column loader" with Sephadex G-50 superfine. Transfer the Sephadex to the filter plate MAHVN4510 by turning over.</li>
 <li>Add 300 &mu;l Milli-Q H2O to each well in the filter plate, and incubate it for at least 3h at 2-8&deg;C.</li>
 <li>Centrifuge the plates for 5 min at 910Xg and 4-15&deg;C. Discard the flow-through.</li>
 <li>Add 10 &mu;l H2O to the sequence product and then pipet the sequence on the swelled Sephadex plate.</li>
 <li>To gain the purified product, centrifuge the plate for 5 min. at 910Xg and 4-15&deg;C and collect the flow-through.</li>
</ol>
7. Sequencing the purified samples on the sequencer ABI Prism 3130 XL
<ol>
 <li>Before each run, change the buffer and check the volume of the polymer (POP7). If needed, replace the old polymer flask by a new one.</li>
 <li>Use the saved run conditions, including an injection time of 18 seconds.</li>
 <li>In this machine, the collection of the signal data of one run with 16 sequence samples takes about 60 min (36 cm capillary) or 150 min (50 cm capillary).</li>
</ol>
8. Sequence editing
<ol>
 <li>Use the program Lasergene (DNA-Star) to align and edit the sequences (Fig. 5). Other sequence editing programs may be used. Use a "V3-Consensus B" and the env consensus sequence as references.</li>
 <li>Lasergene creates a consensus sequence of the analysed sample using all the raw data available and store it as FASTA file. The FASTA file is a text file that includes a header with the name of the sample and the nucleotide sequence.</li>
</ol>
9. Sequencing data interpretation and tropism prediction
<ol>
 <li>Sequencing data interpretation is performed by the web-based interpretation system geno2pheno[coreceptor] (<a href="http://coreceptor.bioinf.mpi-inf.mpg.de/index.php">http://coreceptor.bioinf.mpi-inf.mpg.de/index.php</a>). For the tropism prediction, different FPR settings can be selected. The default setting is according to the German-Austrian therapy guidelines. For FPR &ge; 20%, the virus is classified as R5 when FPR &ge; 20% and X4 for FPR &lt; 12.5%.</li>
 <li>Upload the FASTA file into the server. This server translates the nucleotide sequence into amino acids, aligns it with the V3-Consensus B sequence and produces a subtype classification. In addition, it generates a prediction of the coreceptor usage (Fig. 4) expressed as false positive rate (FPR).</li>
</ol>
10. Representative Results
The geno2pheno[coreceptor] output shows a graded interpretation of the tropism. Depending on the likelihood of the coreceptor usage, the interpretation text and background color varies from green (&lt;20% FPR), suggesting a safe administration for MVC, to yellow, suggesting a possible, low risk and finally to red. Red is the color suggesting not to prescribe MVC. In addition, the server generates a pdf report that can be printed, filled in with patient's and sample data, and sent to the physician. Examples of geno2pheno[coreceptor] output are depicted in Fig. 6.
<img alt="Figure 1" src="/files/ftp_upload/3264/3264fig1.jpg" /> 
Figure. 1. Schematic replication of HIV. The virion must bind to the cellular CD4 as receptor and to either the CCR5 or CXCR4 as coreceptor. The coreceptor CCR5 can be blocked with CCR5 antagonists like Maraviroc (MVC, Celsentri, Selzentry). After fusion of the viral and cellular membranes, the viral nucleocapsid is released in the cytoplasm. The nucleocapsid disassembles and the viral RNA complex is liberated into the cytoplasm. The viral reverse transcriptase (RT) transcribes the genomic RNA into proviral DNA, that is then transported to the nucleus and integrated into the host genome by the HIV integrase. Cellular RNA polymerases transcribe viral genomic and messenger RNAs from the proviral genome. The viral proteins are produced in the cytoplasm and transported to the cell surface. The virus particles bud as immature, non-infectious virions from the cells. The HIV protease cleaves the proteins producing to infectious particles. Inhibition of one of the steps leads to an interruption of the replication cycle.
The antiretroviral drugs and the replication step that they inhibit are marked in red.
The viral RNA and proviral DNA (material used for tropism or resistance analysis) are marked in green.


<img alt="Figure 2" src="/files/ftp_upload/3264/3264fig2.jpg" /> 
Figure 2. HIV proviral genome. The HIV particle is built with different structural proteins and houses various enzymes and proteins both from viral and cellular origin. The figure shows the location of the genes within the viral genome. The surface proteins gp120 and gp41 constitute spikes on the surface of the virion and contact the human cell to perform the membrane fusion. In the lower part of the figure, the PCR amplification products and the primers used in our protocol are shown.
<img alt="Figure 3" src="/files/ftp_upload/3264/3264fig3.jpg" /> 
Figure 3. Proportion of patients with low viral load (VL) measurements analyzed for drug-resistance or tropism determination at the Institute of Virology, University of Cologne (Germany).


<img alt="Figure 4" src="/files/ftp_upload/3264/3264fig4.jpg" /> 
Figure 4. Overall scheme of the experiment.. Please <a href="https://www.jove.com/files/ftp_upload/3264/3264fig4_lg.jpg">click here</a> to see a larger version of this figure.
<img alt="Figure 5" src="/files/ftp_upload/3264/3264fig5.jpg" /> 
Figure 5. Sequence editing with Lasergene. The V3 amplicon is sequenced with at least one forward and one reverse primer. Lasergene alignes the ".abi" files obtained from the sequencer with the reference sequences "V3-Consensus B" and env. Lasergene creates a consensus sequence using all the row data available. The reference sequences can be marked (and are then displayed in grey) so that they do not contribute to the sample consensus sequence.
<img alt="Figure 6" src="/files/ftp_upload/3264/3264fig6.jpg" /> 
Figure 6. Tropism prediction reports generated by the geno2pheno[coreceptor] tool.The reports are generated as pdf files that can be saved and completed in the computer. Additional data such us patient's name, date of blood extraction, etc., can be manually included using a pdf writer program. Specific comments can be also added. These data are exclusively on the user's computer and not on the geno2pheno[coreceptor] server. Please <a href="https://www.jove.com/files/ftp_upload/3264/3264fig6_lg.jpg">click here</a> to see a larger version of this figure.

<ol>
	<li>Heger, E., Schuelter, E., Klimkait, T., Lengauer, T., Kaiser, R., Walter, H., Sierra, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=European+coreceptor+proficiency+panel+test.">European coreceptor proficiency panel test.</a> , (2011).</li><li>Lengauer, T., Sander, O., Sierra, S., Thielen, T., Kaiser, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bioinformatic+prediction+of+HIV+coreceptor+usage.">Bioinformatic prediction of HIV coreceptor usage.</a> Nature Biotech. 25 (12), 1407-1410 (2007).</li><li>McGovern, R., Dong, W., Zhong, X., Knapp, D., Thielen, A., Chapman, D., Lewis, M., James, I., Valdez, H., Harrigan, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Population-based+Sequencing+of+the+V3-loop+Is+Comparable+to+the+Enhanced+Sensitivity+Trofile+Assay+in+Predicting+Virologic+Response+to+Maraviroc+of+Treatment-na+ve+Patients+in+the+MERIT+Trial.">Population-based Sequencing of the V3-loop Is Comparable to the Enhanced Sensitivity Trofile Assay in Predicting Virologic Response to Maraviroc of Treatment-na ve Patients in the MERIT Trial.</a> , (2010).</li><li>Reuter, S., Braken, P., Jensen, B., Sierra-Aragon, S., Oette, M., Balduin, M., Kaiser, R., Haussinger, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Maraviroc+in+treatment-experienced+patients+with+HIV-1+infection+-+experience+from+routine+clinical+practice.">Maraviroc in treatment-experienced patients with HIV-1 infection - experience from routine clinical practice.</a> Eur. J. Med. Res. 15 (6), 231-237 (2010).</li><li>Recordon-Pinson, P., Soulie, C., Flandre, P., Descamps, D., Lazrek, M., Charpentier, C., Montes, B., Trabaud, M. A., Cottalorda, J., Schneider, V., Morand-Joubert, L., Tamalet, C., Desbois, D., Mace, M., Ferre, V., Vabret, A., Ruffault, A., Pallier, C., Raymond, S., Izopet, J., Reynes, J., Marcelin, A. G., Masquelier, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+the+genotypic+prediction+of+HIV-1+coreceptor+use+versus+a+phenotypic+assay+and+correlation+with+the+virological+response+to+maraviroc:+the+ANRS+GenoTropism+study.">Evaluation of the genotypic prediction of HIV-1 coreceptor use versus a phenotypic assay and correlation with the virological response to maraviroc: the ANRS GenoTropism study.</a> Antimicrob. Agents. Chemother. 54 (8), 3335-3340 (2010).</li><li>Swenson, L. C., Knapp, D., Harrigan, P. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Calibration+and+accuracy+of+the+geno2pheno+co-receptor+algorithm+for+predicting+HIV+tropism+for+single+and+triplicate+measurements+of+V3+genotype.">Calibration and accuracy of the geno2pheno co-receptor algorithm for predicting HIV tropism for single and triplicate measurements of V3 genotype.</a> , (2010).</li><li>Macartney, M. J., Cameron, J., Strang, A., Garc&#237;a, A., Booth, C., Marshall, N., Johnson, M., Geretti, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Use+of+a+genotypic+assay+for+the+prediction+of+HIV-1+coreceptor+tropism+and+guiding+the+use+of+CCR5+antagonists+in+clinical+practice.">Use of a genotypic assay for the prediction of HIV-1 coreceptor tropism and guiding the use of CCR5 antagonists in clinical practice.</a> , (2010).</li><li>Sierra, S., Thielen, A., Reuter, S., Jensen, B., Esser, S., F&#228;tkenheuer, G., Lengauer, T., Pfister, H., Sichtig, N., Kaiser, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tropism+determination+and+clinical+outcome+of+61+patients+under+MVC+treatment.">Tropism determination and clinical outcome of 61 patients under MVC treatment.</a> , (2010).</li><li>Obermeier, M., Carganico, A., Bieniek, B., Schleehauf, D., Dupke, S., Fischer, K., Freiwald, M., Neifer, S., Schuler, C., Mayr, C., Klausen, G., K&#246;ppe, S., &#252;&#252;nsche, T., Berg, T., Baumgarten, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tropism+testing+from+proviral+DNA+-+analysis+of+a+subgroup+from+the+Berlin+Maraviroc+cohort.">Tropism testing from proviral DNA - analysis of a subgroup from the Berlin Maraviroc cohort.</a> , (2010).</li><li>Vandekerckhove, L. P., Wensing, A. M., Kaiser, R., Brun-Vezinet, F., Clotet, B., De Luca, A., Dressler, S., Garcia, F., Geretti, A. M., Klimkait, T., Korn, K., Masquelier, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=European+guidelines+on+the+clinical+management+of+HIV-1+tropism+testing.">European guidelines on the clinical management of HIV-1 tropism testing.</a> Lancet Infect Dis. 11 (5), 394-407 (2011).</li><li>Walter, H., Eberle, J., M&#246;ller, H., Noah, C., Wolf, E., St rmer, M., Braun, P., Krn, K., D umer, M., Berg, T., Obermeier, M., Thielen, A., Kaiser, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Empfehlung+zur+Bestimmung+des+HIV-1-Korezeptor-Gebrauchs+(DAIG+Recommendations+for+the+HIV-1+tropism+testing).">Empfehlung zur Bestimmung des HIV-1-Korezeptor-Gebrauchs (DAIG Recommendations for the HIV-1 tropism testing).</a> , (2011).</li><li>Obermeier, M. J., Carganico, A., Dupke, S., Schranz, D., Cordes, C., Freiwald, M., Klausen, G., K&#246;ppe, S., Schuler, C., Mayr, C., Schleehauf, D., Berg, T., Krznaric, I., Baumgarten, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+application+of+genotypic+co-receptor+tropism+testing+from+viral+RNA+and+proviral+DNA:+week+24+analysis+of+the+Berlin+maraviroc+cohort.">Clinical application of genotypic co-receptor tropism testing from viral RNA and proviral DNA: week 24 analysis of the Berlin maraviroc cohort.</a> Journal of the International AIDS Society. 13, 129-129 (2010).</li><li>Toma, J., Frantzell, A., Hoh, R., Martin, J., Deeks, S., Petropoulos, C., Huang, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determining+HIV-1+Co-receptor+Tropism+Using+PBMC+Proviral+DNA+Derived+from+Aviremic+Blood+Samples.">Determining HIV-1 Co-receptor Tropism Using PBMC Proviral DNA Derived from Aviremic Blood Samples.</a> , (2010).</li></ol>

This video article is sponsored by ViiV Healthcare and GlaxoSmithKline.

The V3 sequence permits a reliable viral tropism prediction, as shown in clinical studies3-9. In fact, genotypic determination is contemplated in the current European and German-Austrian guidelines10. 
Compared to phenotypic testing, not only is the turnover time shorter (equivalent to resistance testing), but also are the costs. In addition, a major advantage of genotypic testing is that the results are graded as FPR and therefore can be adapted to the patients' needs. Trofile results, on the other hand, are simply R5 or X4 reports, and access to the raw data is not given.
Currently, The European guidelines suggest a FPR cut-off of 20%10, while the Austrian-German guidelines allow adapting the FPR cut-off specifically to each patient's needs11. In this line, for patients with a broad range of antiretroviral drugs options, higher FPR cut-offs (&gt; 20%) are recommended. Conversely, for heavily pre-treated patients with limited therapeutic options, lower FPR cut-offs (&gt; 5%) may be used. This kind of therapy guidance is currently ongoing by the resistance testing to NRTIs, NNRTIs, PIs, and INIs, where partially-active drugs may be included in the treatment for patients with reduced therapeutic options. In addition, with growing numbers of genotypically-guided therapy changes, the clinically-relevant FPR cut-offs are constantly being adjusted by a panel of bioinformaticians, virologists and clinicians.
Another important advantage of the genotypic tropism testing is the possibility of analyzing clinical samples with very low or even undetectable viral load (VL). In this cases, when plasma RNA is not amplifiable, the proviral DNA can be sequenced and used for reliable predictions9,12. Of note, the number of patients with low or undetectable viral load has sharply increased in the latest years. To date, the Trofile assay only allows the analysis of samples from patients with VL&lt;1000 copies/ml. However, preliminary studies have shown that proviral DNA may be also adecuate to be tested by Trofile13.

<table border="1">
<tbody>
<tr>
<td>Name of the reagent</td>
<td>Company</td>
<td>Catalogue number</td>
<td>Comments </td>
</tr>
<tr>
<td>MagNA Pure Compact Nucleic Acid Isolation Kit I</td>
<td>Roche Diagnostics</td>
<td>04 802 993 001</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>MagNA Pure Compact System</td>
<td>Roche Diagnostics</td>
<td>03731146001</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>T3000 Thermocycler</td>
<td>Biometra</td>
<td>050-723</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>One Step RT-PCR Kit</td>
<td>Qiagen</td>
<td>210215</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>HotStarTaq Master Mix Kit</td>
<td>Qiagen</td>
<td>203445</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>QIAquick PCR Purification Kit</td>
<td>Qiagen</td>
<td>28106</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Exonuclease I (Exo I)</td>
<td>Fermentas</td>
<td>EN0582</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>FastAP Thermosensitive Alkaline Phosphatase</td>
<td>Fermentas</td>
<td>EF0651</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>BigDye Terminator v3.1 Cycle Sequencing Kit</td>
<td>Applied Biosystems</td>
<td>4337457</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>Sephadex G-50 Superfine</td>
<td>GE Healthcare</td>
<td>17-0041-01</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>ABI Prism 3130 XL capillary sequencer</td>
<td>Applied Biosystems</td>
<td>3130XL</td>
<td>&nbsp;</td>
</tr>
</tbody>
</table>

prediction of hiv-1 coreceptor usage (tropism) by sequence analysis using a genotypic approach

Maraviroc (MVC) is the first licensed antiretroviral drug from the class of coreceptor antagonists. It binds to the host coreceptor CCR5, which is used by the majority of HIV strains in order to infect the human immune cells (Fig. 1). Other HIV isolates use a different coreceptor, the CXCR4. Which receptor is used, is determined in the virus by the Env protein (Fig. 2). Depending on the coreceptor used, the viruses are classified as R5 or X4, respectively. MVC binds to the CCR5 receptor inhibiting the entry of R5 viruses into the target cell. During the course of disease, X4 viruses may emerge and outgrow the R5 viruses. Determination of coreceptor usage (also called tropism) is therefore mandatory prior to administration of MVC, as demanded by EMA and FDA. 
The studies for MVC efficiency MOTIVATE, MERIT and 1029 have been performed with the Trofile assay from Monogram, San Francisco, U.S.A. This is a high quality assay based on sophisticated recombinant tests. The acceptance for this test for daily routine is rather low outside of the U.S.A., since the European physicians rather tend to work with decentralized expert laboratories, which also provide concomitant resistance testing. These laboratories have undergone several quality assurance evaluations, the last one being presented in 20111.
For several years now, we have performed tropism determinations based on sequence analysis from the HIV env-V3 gene region (V3)2. This region carries enough information to perform a reliable prediction. 
The genotypic determination of coreceptor usage presents advantages such as: shorter turnover time (equivalent to resistance testing), lower costs, possibility to adapt the results to the patients' needs and possibility of analysing clinical samples with very low or even undetectable viral load (VL), particularly since the number of samples analysed with VL&lt;1000 copies/&mu;l roughly increased in the last years (Fig. 3).
The main steps for tropism testing (Fig. 4) demonstrated in this video: 
1. Collection of a blood sample 
 2. Isolation of the HIV RNA from the plasma and/or HIV proviral DNA from blood mononuclear cells 
 3. Amplification of the env region 
 4. Amplification of the V3 region 
 5. Sequence reaction of the V3 amplicon 
 6. Purification of the sequencing samples 
 7. Sequencing the purified samples 
 8. Sequence editing 
 9. Sequencing data interpretation and tropism prediction

Watch this Scientific Journal Video about Prediction of HIV-1 Coreceptor Usage Tropism by Sequence Analysis using a Genotypic Approach at JoVE.com

Prediction of HIV-1 Coreceptor Usage Tropism by Sequence Analysis using a Genotypic Approach

The prediction of the coreceptor usage of HIV-1 is required for the administration of a new class of antiretroviral drugs, i.e. coreceptor antagonists. It can be performed by sequence analysis of the env gene and subsequent interpretation through an internet based interpretation system (geno2pheno[coreceptor]).

Prediction of HIV-1 Coreceptor Usage (Tropism) by Sequence Analysis using a Genotypic Approach

Maraviroc (MVC) is the first licensed antiretroviral drug from the class of coreceptor antagonists. It binds to the host coreceptor CCR5, which is used by ...

<a class="grey_button" href="http://www.jove.com/video/4153"> Espa&ntilde;ol </a>

Research

JoVE Journal

Immunology and Infection

Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding

Assessment of Immunologically Relevant Dynamic Tertiary Structural Features of the HIV-1 V3 Loop Crown R2 Sequence by ab initio Folding

The antigenic diversity of HIV-1 has long been an obstacle to vaccine design, and this variability is especially pronounced in the V3 loop of the virus' ...

Specific Marking of HIV-1 Positive Cells using a Rev-dependent Lentiviral Vector Expressing the Green Fluorescent Protein

Most of HIV-responsive expression vectors are based on the HIV promoter, the long terminal repeat (LTR). While responsive to an early HIV protein, Tat, ...

Genotypic Inference of HIV-1 Tropism Using Population-based Sequencing of V3

Background: Prior to receiving a drug from CCR5-antagonist class in HIV therapy, a patient must undergo an HIV tropism test to confirm that his or her ...

Structure of HIV-1 Capsid Assemblies by Cryo-electron Microscopy and Iterative Helical Real-space Reconstruction

Cryo-electron microscopy (cryo-EM), combined with image processing, is an increasingly powerful tool for structure determination of macromolecular protein ...

In vitro Uncoating of HIV-1 Cores

In vitro Uncoating of HIV-1 Cores

In vitro Uncoating af HIV-1 kerner

The genome of the retroviruses is encased in a capsid surrounded by a lipid envelope. For lentiviruses, such as HIV-1, the conical capsid shell is ...

New Tools to Expand Regulatory T Cells from HIV-1-infected Individuals

Nye værktøjer til at udvide regulatoriske T celler fra HIV-1-inficerede personer

CD4+ Regulatory T cells (Tregs) are potent immune modulators and serve an important function in human immune homeostasis. Depletion of Tregs has led to ...

Assessing the Innate Sensing of HIV-1 Infected CD4+ T Cells by Plasmacytoid Dendritic Cells Using an Ex vivo Co-culture System.

Assessing the Innate Sensing of HIV-1 Infected CD4+ T Cells by Plasmacytoid Dendritic Cells Using an Ex vivo Co-culture System.

Vurdering af Innate Sensing af HIV-1 inficerede CD4<sup&gt; +</sup&gt; T-celler ved plasmacytoide dendritiske celler ved hjælp af en<em&gt; Ex vivo</em&gt; Co-dyrkningssystem.

HIV-1 innate sensing requires direct contact of infected CD4+ T cells with plasmacytoid dendritic cells (pDCs). In order to study this process, the ...

Conformational Evaluation of HIV-1 Trimeric Envelope Glycoproteins Using a Cell-based ELISA Assay

Konformationel Evaluering af HIV-1 trimere kappeglycoproteinerne hjælp af en celle-ELISA-assay

HIV-1 envelope glycoproteins (Env) mediate viral entry into target cells and are essential to the infectious cycle. Understanding how those glycoproteins ...

Isolation of Exosomes from the Plasma of HIV-1 Positive Individuals

Isolering af Exosomer fra plasma af HIV-1 Positive Personer

Exosomes are small vesicles ranging in size from 30 nm to 100 nm that are released both constitutively and upon stimulation from a variety of cell types. ...

Visualization of HIV-1 Gag Binding to Giant Unilamellar Vesicle (GUV) Membranes

Visualization of HIV-1 Gag Binding to Giant Unilamellar Vesicle GUV Membranes

Visualisering af HIV-1 Gag binding til Giant unilamellare vesikel (GUV) Membraner

The structural protein of HIV-1, Pr55Gag (or Gag), binds to the plasma membrane in cells during the virus assembly process. Membrane binding of Gag is an ...