Name: terahertz microfluidic sensing using a parallel-plate waveguide sensor
Uploaded: 2012-08-30T13:00:00
Description: Watch this Scientific Journal Video about Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor at JoVE.com

Ce projet a été financé en partie par la National Science Foundation et par l&#39;Air Force Research Laboratory à travers le programme CONTACT.

1. Conception et fabrication de capteur <ol><li> Concevoir un guide d&#39;ondes à plaques parallèles avec une ou plusieurs cavités intégrées (ou &quot;rainures&quot;). Voir les figures 1 et 2. Géométrie peut être fondée sur celle donnée dans nos publications antérieures 8,9 ou spécialement conçus pour l&#39;application particulière. Les principes directeurs généraux suivants sont proposés: <ol><li> Espacement plaque: Dans cette expérience, une plaque d&#39...

<ol>
	<li>Kuswandi, B., Nuriman, ., Huskens, J., Verboom, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+sensing+systems+for+microfluidic+devices:+A+review.">Optical sensing systems for microfluidic devices: A review.</a> Ana. Chim. Acta. 601, 141-155 (2007).</li><li>Zhu, H., White, I. M., Suter, J. D., Zourob, M., Fan, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Integrated+refractive+index+optical+ring+resonator+detector+for+capillary+electrophoresis.">Integrated refractive index optical ring resonator detector for capillary electrophoresis.</a> Anal. Chem. 79, 930-937 (2007).</li><li>Kurt, H., Citrin, D. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coupled-resonator+optical+waveguides+for+biochemical+sensing+of+nanoliter+volumes+of+analyte+in+the+terahertz+region.">Coupled-resonator optical waveguides for biochemical sensing of nanoliter volumes of analyte in the terahertz region.</a> Appl. Phys. Lett. 87, 241119 (2005).</li><li>Debus, C., Bolivar, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Frequency+selective+surfaces+for+high+sensitivity+terahertz+sensing.">Frequency selective surfaces for high sensitivity terahertz sensing.</a> Appl. Phys. Lett. 91, 184102 (2007).</li><li>Harsha, S. S., Laman, N., Grischkowsky, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-Q+terahertz+Bragg+rsonances+within+a+metal+parallel+plate+waveguide.">High-Q terahertz Bragg rsonances within a metal parallel plate waveguide.</a> Appl. Phys. Lett. 94, 091118 (2009).</li><li>Mendis, R., Mittleman, D. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+the+lowest-order+transverse-electric+(TE1)+and+transverse-magnetic+(TEM)+modes+of+the+parallel-plate+waveguide+for+terahertz+pulse+applications.">Comparison of the lowest-order transverse-electric (TE1) and transverse-magnetic (TEM) modes of the parallel-plate waveguide for terahertz pulse applications.</a> Optics Express. 17, 14839-14850 (2009).</li><li>Mendis, R., Mittleman, D. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+investigation+of+the+lowest-order+transverse-electric+(TE1)+mode+of+the+parallel-plate+waveguide+for+THz+pulse+propagation.">An investigation of the lowest-order transverse-electric (TE1) mode of the parallel-plate waveguide for THz pulse propagation.</a> JOSA B. 26, A6-A13 (2009).</li><li>Astley, V., McCracken, B., Mendis, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Analysis+of+rectangular+resonant+cavities+in+terahertz+parallel-plate+waveguides.">Analysis of rectangular resonant cavities in terahertz parallel-plate waveguides.</a> Opt. Lett. 36, 1452 (2011).</li><li>Mendis, R., Astley, V., Liu, J., Mittleman, D. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Terahertz+microfluidic+sensor+based+on+a+parallel-plate-waveguide+resonant+cavity.">Terahertz microfluidic sensor based on a parallel-plate-waveguide resonant cavity.</a> Appl. Phys. Lett. 95, 171113 (2009).</li><li>Astley, V., Reichel, K., Jones, J., Mendis, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Terahertz+multichannel+microfluidic+sensor+based+on+parallel-plate+waveguide+resonant+cavities.">Terahertz multichannel microfluidic sensor based on parallel-plate waveguide resonant cavities.</a> Appl. Phys. Lett. , (2012).</li></ol>

Il est à noter que l&#39;indice de réfraction du liquide à tester est déterminé uniquement à la fréquence de résonance de la cavité de l&#39;, et non sur une large bande passante. Ceci a quelques avantages distincts. Premièrement, bien que nos mesures ont fait usage d&#39;une source térahertz large bande à des fins de caractérisation, on pourrait aussi construire un système équivalent de détection avec une source mono-fréquence THz avec seulement un degré limité d&#39;accordabilité fréquence, une ap...

<table border="1"><tbody><tr><td> Nom du réactif </td><td> Entreprise </td><td> Numéro de catalogue </td><td> Commentaires (optionnel) </td></tr><tr><td> Seringue de 10 ul </td><td> Hamilton </td><td> 80314 </td><td> Seringue de haute précision </td></tr><tr><td> Les alcanes liquides </td><td> Acros Organics </td><td></td><td> Les échantillons destinés à l&#39;étalonnage et d&#39;essais </td></tr><tr><td></td><td></td><td></td><td> Aucun équipement spécifique n&#39;est nécessaire. Matériaux d&#39;essai appropriées et les solvants sont laissés à la discrétion de l&#39;expérimentateur. Les seringues de haute précision utilisés dans cette procédure sont indiqués dans le tableau ci-dessous, mais l&#39;expérimentateur peut souhaiter utiliser des seringues d&#39;un volume ou un design différent, y compris les seringues numériques pour une meilleure précision. Les alcanes de test utilisées dans cette expérience sont également répertoriés. </td></tr></tbody></table>

terahertz microfluidic sensing using a parallel-plate waveguide sensor

Indice de réfraction (RI) est une détection non invasive puissant et sans étiquette technique de détection pour l&#39;identification, la détection et le suivi des échantillons microfluidiques avec une large gamme de modèles de capteurs possibles, tels que les interféromètres et résonateurs 1,2. La plupart des applications de la RI existants de détection se concentrer sur des matériaux biologiques dans des solutions aqueuses dans les fréquences visibles et IR, telles que l&#39;hybridation de l&#39;ADN et le séquençage du génome. Aux fréquences térahertz, les applications incluent le contrôle qualité, le suivi des procédés industriels et de la détection et des applications de détection impliquant des matériaux non polaires. Plusieurs conceptions possibles pour les capteurs d&#39;indice de réfraction dans le régime THz existent, notamment des guides d&#39;ondes à cristaux photoniques 3, asymétriques à anneau fendu résonateurs 4 et structures photoniques à bande interdite intégrés dans des guides d&#39;ondes à plaques parallèles 5. Beaucoup de ces modèles sont basés sur des résonateurs optiques tels que des baguesou cavités. Les fréquences de résonance de ces structures dépendent de l&#39;indice de réfraction du matériau dans ou autour du résonateur. En surveillant les changements de fréquence de résonance de l&#39;indice de réfraction d&#39;un échantillon peut être mesurée avec précision, ce qui à son tour peut être utilisée pour identifier un matériau, suivi de la contamination ou dilution, etc La conception du capteur que nous utilisons ici est basé sur un simple guide d&#39;ondes à plaques parallèles 6,7. Une rainure rectangulaire usinée dans un agit visage comme une cavité résonnante (figures 1 et 2). Lorsque le rayonnement térahertz est couplée dans le guide d&#39;onde et se propage dans l&#39;ordre le plus bas transverse électrique (TE 1) mode, le résultat est une caractéristique unique forte résonance avec une fréquence de résonance accordable qui dépend de la géométrie de la rainure de 6,8. Cette rainure peut être remplie de liquide non polaire échantillons microfluidiques qui provoquent un déplacement de la fréquence de résonance observée qui dépend de la quantité de liqUID dans la rainure et son indice de réfraction 9. Notre technique a un avantage sur les autres techniques térahertz dans sa simplicité, à la fois dans la fabrication et la mise en œuvre, car la procédure peut être réalisée avec du matériel de laboratoire standard, sans la nécessité d&#39;une salle blanche ou toute fabrication spéciale ou techniques expérimentales. Il peut également être facilement étendue à fonctionnement multicanal par l&#39;incorporation de plusieurs rainures 10. Dans cette vidéo, nous allons décrire notre procédure expérimentale complète, de la conception du capteur à l&#39;analyse des données et la détermination de l&#39;indice de réfraction de l&#39;échantillon.

Watch this Scientific Journal Video about Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor at JoVE.com

Terahertz Microfluidic Sensing Using a Parallel-plate Waveguide Sensor

La procédure à suivre pour la mise en œuvre d&#39;un capteur indice de réfraction pour des fréquences terahertz basé sur une géométrie de guide d&#39;ondes à plaques parallèles rainuré est décrite ici. Le procédé donne une mesure de l&#39;indice de réfraction d&#39;un faible volume de liquide à travers le suivi de l&#39;évolution de la fréquence de résonance de la structure de guide d&#39;ondes

Terahertz détection microfluidique en utilisant un capteur de guide d&#39;ondes à plaques parallèles

Refractive index (RI) sensing is a powerful noninvasive and label-free sensing technique for the identification, detection and monitoring of microfluidic ...

terahertz-microfluidic-sensing-using-a-parallel-plate-waveguide-sensor

Research

Education

JoVE Core

JoVE Journal

Electrical Engineering

Engineering

Unit 1

Power Transformers

SCIENTISTS IN ACTION

Design, Fabrication, and Experimental Characterization of Plasmonic Photoconductive Terahertz Emitters

In this video article we present a detailed demonstration of a highly efficient method for generating terahertz waves. Our technique is based on photoconduction, which has been one of the most commonly used techniques for terahertz generation 1-8. Terahertz generation in a photoconductive emitter is achieved by pumping an ultrafast photoconductor with a pulsed or heterodyned laser illumination. The induced photocurrent, which follows the envelope of the pump laser, is routed to a terahertz radiating antenna connected to the photoconductor contact electrodes to generate terahertz radiation. Although the quantum efficiency of a photoconductive emitter can theoretically reach 100%, the relatively long transport path lengths of photo-generated carriers to the contact electrodes of conventional photoconductors have severely limited their quantum efficiency. Additionally, the carrier screening effect and thermal breakdown strictly limit the maximum output power of conventional photoconductive terahertz sources. To address the quantum efficiency limitations of conventional photoconductive terahertz emitters, we have developed a new photoconductive emitter concept which incorporates a plasmonic contact electrode configuration to offer high quantum-efficiency and ultrafast operation simultaneously. By using nano-scale plasmonic contact electrodes, we significantly reduce the average photo-generated carrier transport path to photoconductor contact electrodes compared to conventional photoconductors 9. Our method also allows increasing photoconductor active area without a considerable increase in the capacitive loading to the antenna, boosting the maximum terahertz radiation power by preventing the carrier screening effect and thermal breakdown at high optical pump powers. By incorporating plasmonic contact electrodes, we demonstrate enhancing the optical-to-terahertz power conversion efficiency of a conventional photoconductive terahertz emitter by a factor of 50 10.

We describe methods for the design, fabrication, and experimental characterization of plasmonic photoconductive emitters, which offer two orders of magnitude higher terahertz power levels compared to conventional photoconductive emitters.

Conception, fabrication et expérimentale Caractérisation des plasmoniques émetteurs térahertz Photoconductive

In this video article we present a detailed demonstration of a highly efficient method for generating terahertz waves. Our technique is based on ...

Recherche

Ingénierie

How to Build a Vacuum Spring-transport Package for Spinning Rotor Gauges

The spinning rotor gauge (SRG) is a high-vacuum gauge often used as a secondary or transfer standard for vacuum pressures in the range of 1.0 x 10-4 Pa to 1.0 Pa. In this application, the SRGs are frequently transported to laboratories for calibration. Events can occur during transportation that change the rotor surface conditions, thus changing the calibration factor. To assure calibration stability, a spring-transport mechanism is often used to immobilize the rotor and keep it under vacuum during transport. It is also important to transport the spring-transport mechanism using packaging designed to minimize the risk of damage during shipping. In this manuscript, a detailed description is given on how to build a robust spring-transport mechanism and shipping container. Together these form a spring-transport package. The spring-transport package design was tested using drop-tests and the performance was found to be excellent. The present spring-transport mechanism design keeps the rotor immobilized when experiencing shocks of several hundred g (g = 9.8 m/sec2 and is the acceleration due to gravity), while the shipping container assures that the mechanism will not experience shocks greater than about 100 g during common shipping mishaps (as defined by industry standards).

Here we describe how to build a robust spring-transport mechanism for a spinning rotor gauge. This device securely immobilizes the rotor and keeps it under vacuum during transportation. We also describe packaging that minimizes the risk of damage during transport. Tests show our design works for typical shocks during transport.

Comment construire un printemps de transport Paquet à vide pour Spinning Rotor Jauges

The spinning rotor gauge (SRG) is a high-vacuum gauge often used as a secondary or transfer standard for vacuum pressures in the range of 1.0 x 10-4 Pa to ...

Fabrication of Nanopillar-Based Split Ring Resonators for Displacement Current Mediated Resonances in Terahertz Metamaterials

Terahertz (THz) split ring resonator (SRR) metamaterials (MMs) has been studied for gas, chemical, and biomolecular sensing applications because the SRR is not affected by environmental characteristics such as the temperature and pressure surrounding the resonator. Electromagnetic radiation in THz frequencies is biocompatible, which is a critical condition especially for the application of the biomolecular sensing. However, the quality factor (Q-factor) and frequency responses of traditional thin-film based split ring resonator (SRR) MMs are very low, which limits their sensitivities and selectivity as sensors. In this work, novel nanopillar-based SRR MMs, utilizing displacement current, are designed to enhance the Q-factor up to 450, which is around 45 times higher than that of traditional thin-film-based MMs. In addition to the enhanced Q-factor, the nanopillar-based MMs induce a larger frequency shifts (17 times compared to the shift obtained by the traditional thin-film based MMs). Because of the significantly enhanced Q-factors and frequency shifts as well as the property of biocompatible radiation, the THz nanopillar-based SRR are ideal MMs for the development of biomolecular sensors with high sensitivity and selectivity without inducing damage or distortion to biomaterials. A novel fabrication process has been demonstrated to build the nanopillar-based SRRs for displacement current mediated THz MMs. A two-step gold (Au) electroplating process and an atomic layer deposition (ALD) process are used to create sub-10 nm scale gaps between Au nanopillars. Since the ALD process is a conformal coating process, a uniform aluminum oxide (Al2O3) layer with nanometer-scale thickness can be achieved. By sequentially electroplating another Au thin film to fill the spaces between Al2O3 and Au, a close-packed Au-Al2O3-Au structure with nano-scale Al2O3 gaps can be fabricated. The size of the nano-gaps can be well defined by precisely controlling the deposition cycles of the ALD process, which has an accuracy of 0.1 nm.

A protocol for the design and fabrication of a novel nanopillar-based split ring resonator (SRR) is presented.

Fabrication d&#39;anneaux résonateurs fendus nanopilier-Based pour courant de déplacement Mediated Résonances en térahertz métamatériaux

Terahertz (THz) split ring resonator (SRR) metamaterials (MMs) has been studied for gas, chemical, and biomolecular sensing applications because the SRR ...

Femtosecond Laser Filaments for Use in Sub-Diffraction-Limited Imaging and Remote Sensing

Probing remote matter with laser light is a ubiquitous technique used in circumstances as diverse as laser-induced breakdown spectroscopy and barcode scanners. In classical optics, the intensity that can be brought to bear on a remote target is limited by the spot size of the laser at the distance of the target. This spot size has a lower bound determined by the diffraction limit of classical optics. However, amplified femtosecond laser pulses generate intensity sufficient to modify the refractive index of the ambient air and undergo self-focusing. This self-focusing effect leads to the generation of highly intense laser filaments which maintain their intensity and small sub-millimeter diameter size at distances well beyond the classical Rayleigh length. Such intensity provides the capability of remote scanning, imaging, sensing, and spectroscopy with enhanced spatial resolution. We describe a technique for generating filaments with a femtosecond regenerative chirped-pulse amplifier, and for using the resulting filament to conduct imaging and spectroscopic measurements at remote distances of at least several meters.

High-intensity femtosecond pulses of laser light can undergo cycles of Kerr self-focusing and plasma defocusing, propagating an intense sub-millimeter-diameter beam over long distances. We describe a technique for generating and using these filaments to perform remote imaging and sensing beyond the classical diffraction limits of linear optics.

Filaments de Laser femtoseconde pour utilisation en imagerie de sous-sous-Diffraction-Limited et de la télédétection

Probing remote matter with laser light is a ubiquitous technique used in circumstances as diverse as laser-induced breakdown spectroscopy and barcode ...

A Silicon-tipped Fiber-optic Sensing Platform with High Resolution and Fast Response

In this article, we introduce an innovative and practically promising fiber-optic sensing platform (FOSP) that we proposed and demonstrated recently. This FOSP relies on a silicon Fabry-Perot interferometer (FPI) attached to the fiber end, referred to as Si-FOSP in this work. The Si-FOSP generates an interferogram determined by the optical path length (OPL) of the silicon cavity. Measurand alters the OPL and thus shifts the interferogram. Due to the unique optical and thermal properties of the silicon material, this Si-FOSP exhibits an advantageous performance in terms of sensitivity and speed. Furthermore, the mature silicon fabrication industry endows the Si-FOSP with excellent reproducibility and low cost toward practical applications. Depending on the specific applications, either a low-finesse or high-finesse version will be utilized, and two different data demodulation methods will be adopted accordingly. Detailed protocols for fabricating both versions of the Si-FOSP will be provided. Three representative applications and their according results will be shown. The first one is a prototype underwater thermometer for profiling the ocean thermoclines, the second one is a flow meter to measure flow speed in the ocean, and the last one is a bolometer used for monitoring exhaust radiation from magnetically confined high-temperature plasma.

This work reports an innovative silicon-tipped fiber-optic sensing platform (Si-FOSP) for high-resolution and fast-response measurement of a variety of physical parameters, such as temperature, flow, and radiation. Applications of this Si-FOSP span from oceanographic research, mechanical industry, to fusion energy research.

Une plate-forme silicium pointe fibre optique télédétection haute résolution et une réponse rapide

In this article, we introduce an innovative and practically promising fiber-optic sensing platform (FOSP) that we proposed and demonstrated recently. This ...

Terahertz Imaging and Characterization Protocol for Freshly Excised Breast Cancer Tumors

This manuscript presents a protocol to handle, characterize, and image freshly excised human breast tumors using pulsed terahertz imaging and spectroscopy techniques. The protocol involves terahertz transmission mode at normal incidence and terahertz reflection mode at an oblique angle of 30&#176;. The collected experimental data represent time domain pulses of the electric field. The terahertz electric field signal transmitted through a fixed point on the excised tissue is processed, through an analytical model, to extract the refractive index and absorption coefficient of the tissue. Utilizing a stepper motor scanner, the terahertz emitted pulse is reflected from each pixel on the tumor providing a planar image of different tissue regions. The image can be presented in time or frequency domain. Furthermore, the extracted data of the refractive index and absorption coefficient at each pixel are utilized to provide a tomographic terahertz image of the tumor. The protocol demonstrates clear differentiation between cancerous and healthy tissues. On the other hand, not adhering to the protocol can result in noisy or inaccurate images due to the presence of air bubbles and fluid remains on the tumor surface. The protocol provides a method for surgical margins assessment of breast tumors.

Freshly excised human breast cancer tumors are characterized with terahertz spectroscopy and imaging following fresh tissue handling protocols. Tissue positioning is taken into consideration to enable effective characterization while providing analysis in a timely manner for future intraoperative applications.

Protocole d’imagerie et de caractérisation de Terahertz pour les tumeurs fraîchement excisées du cancer du sein

This manuscript presents a protocol to handle, characterize, and image freshly excised human breast tumors using pulsed terahertz imaging and spectroscopy ...

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System

The current particle size threshold of the European Particle Number (PN) emission standards is 23 nm. This threshold could change because future combustion engine vehicle technology may emit large amounts of sub-23 nm particles. The Horizon 2020 funded project DownToTen (DTT) developed a sampling and measurement method to characterize particle emissions in this currently unregulated size range. A PN measurement system was developed based on an extensive review of the literature and laboratory experiments testing a variety of PN measurement and sampling approaches. The measurement system developed is characterized by high particle penetration and versatility, which enables the assessment of primary particles, delayed primary particles, and secondary aerosols, starting from a few nanometers in diameter. This paper provides instruction on how to install and operate this Portable Emission Measurement System (PEMS) for Real Drive Emissions (RDE) measurements and assess particle number emissions below the current legislative limit of 23 nm.

Presented here is the DownToTen (DTT) portable emission measurement system to assess real driving automotive emissions of sub-23 nm particles.

Mesure des émissions du nombre de particules de conduite réelle du sous-23 Nanomètre à l’aide du système d’échantillonnage à faible valeur

The current particle size threshold of the European Particle Number (PN) emission standards is 23 nm. This threshold could change because future ...

Mechanoluminescent Visualization of Crack Propagation for Joint Evaluation

In this study, methods for the mechanoluminescent (ML) visualization of crack propagation and mechanical behavior to evaluate adhesive joints are demonstrated and explained. The first step involved sample preparation; an air spray was used to apply ML paint to the surface of the adhesive joint specimens. The performance of the ML sensor was described to examine the measurement conditions. The results of ML sensing during a double cantilever beam (DCB) test and a lap-shear (LS) test are demonstrated as these are the most frequently and widely used methods for evaluating adhesives. Originally, it was difficult to directly quantify the crack tip and strain/stress distribution and concentration because the crack tip was too small, and the effects of the strain could not be observed. The mechanoluminescence, crack propagation, and mechanical behavior during mechanical testing can be visualized via the ML pattern during the adhesive evaluation. This allows for the recognition of the precise position of the crack tips and other mechanical behaviors related to structural failure.

In this study, a protocol is presented that describes the use of mechanoluminescent (ML) visualization for monitoring crack propagation and mechanical behavior during adhesive joint evaluation testing.

Visualisation mécanooluminescente de la propagation des fissures pour une évaluation conjointe

In this study, methods for the mechanoluminescent (ML) visualization of crack propagation and mechanical behavior to evaluate adhesive joints are ...

Fabrication of a Fabry-P&amp;#233;rot Etalon for Application in Trace-Gas Spectroscopy

Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-P&#233;rot Etalon

Fabry-P&#233;rot etalons (FPE) have found their way into many applications. In fields such as spectroscopy, telecommunications, and astronomy, FPEs are used for their high sensitivity as well as their exceptional filtering capability. However, air-spaced etalons with high finesse are usually built by specialized facilities. Their production requires a clean room, special glass handling, and coating machinery, meaning commercially available FPEs are sold for a high price. In this article, a new and cost-effective method to fabricate fiber-coupled FPEs with standard photonic laboratory equipment is presented. The protocol should serve as a step-by-step guide for the construction and characterization of these FPEs. We hope this&#160;will enable researchers to conduct fast and cost-effective prototyping of FPEs for various fields of application. The FPE, as presented here, is used for spectroscopic applications. As shown in the representative results section via proof of principle measurements of water vapor in ambient air, this FPE has a finesse of 15, which is sufficient for the photothermal detection of trace concentrations of gases.

Author Spotlight: Fabrication of a Low-Cost, Fiber-Coupled, and Air-Spaced Fabry-P&amp;#233;rot Etalon  

This protocol describes the construction of a low-cost, discrete, fiber-coupled, and air-spaced Fabry-Perot etalon with various applications, such as in trace-gas spectroscopy. The fabrication is possible in any facility with standard optical laboratory equipment available.

Fabrication d’un Etalon Fabry-Pérot à faible coût, couplé à la fibre et espacé d’air

Fabry-P&#233;rot etalons (FPE) have found their way into many applications. In fields such as spectroscopy, telecommunications, and astronomy, FPEs are ...

Électrodes souples à base de canaux microfluidiques pour la détection de pression capacitive

Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Flexible and stretchable electrodes are essential components in soft artificial sensory systems. Despite recent advances in flexible electronics, most electrodes are either restricted by the patterning resolution or the capability of inkjet printing with high-viscosity super-elastic materials. In this paper, we present a simple strategy to fabricate microchannel-based stretchable composite electrodes, which can be achieved by scraping elastic conductive polymer composites (ECPCs) into lithographically embossed microfluidic channels. The ECPCs were prepared by a volatile solvent evaporation method, which achieves a uniform dispersion of carbon nanotubes (CNTs) in a polydimethylsiloxane (PDMS) matrix. Compared to conventional fabrication methods, the proposed technique can facilitate the rapid fabrication of well-defined stretchable electrodes with high-viscosity slurry. Since the electrodes in this work were made up of all-elastomeric materials, strong interlinks can be formed between the ECPCs-based electrodes and the PDMS-based substrate at the interfaces of the microchannel walls, which allows the electrodes to exhibit mechanical robustness under high tensile strains. In addition, the mechanical-electric response of the electrodes was also systematically studied. Finally, a soft pressure sensor was developed by combining a dielectric silicone foam and an interdigitated electrodes (IDE) layer, and this demonstrated great potential for pressure sensors in soft robotic tactile sensing applications.

Pleins feux sur l’auteur : Les électrodes molles à base de canaux microfluidiques et leur application dans la détection de pression capacitive  

Flexible electrodes have a wide range of applications in soft robotics and wearable electronics. The present protocol demonstrates a new strategy to fabricate highly stretchable electrodes with high resolution via lithographically defined microfluidic channels, which paves the way for future high-performance soft pressure sensors.

Électrodes souples à base de canaux microfluidiques et leur application dans la détection capacitive de pression

Flexible and stretchable electrodes are essential components in soft artificial sensory systems. Despite recent advances in flexible electronics, most ...