Name: nanomanipulation of single rna molecules by optical tweezers
Uploaded: 2014-08-20T13:00:00
Description: Watch this Scientific Journal Video about Nanomanipulation of Single RNA Molecules by Optical Tweezers at JoVE.com

This work was supported by an NSF grant (MCB-1054449) and a collaborative interdisciplinary Pilot Research Program award from The RNA Institute at University at Albany to PTXL.

1. Preparation of RNA Molecules for Single-molecule Tweezing
<ol>
	<li>Cloning the sequence of interest. Clone the DNA sequence corresponding to the RNA structure into a vector.</li>
	<li>Synthesis and purification of the transcription template. Synthesize a transcription template by PCR. [place table 1 here] Next, purify the PCR products using a PCR purification kit, and concentrate the sample to &#62;200 ng/&#181;l. Because the purified DNA is used for transcription, RNase free water should be used in the elution and...

Modification and Troubleshooting in Preparation of Tweezing Samples
Choice of Cloning Vector. Although the general scheme described here (Figure 3) does not require a special cloning vector, the vector is preferred not to have intrinsic T7 or T3 promoter for the ease of transcription such that a promoter can be introduced via PCR at desired positions.
Sequence and Lengths of the Handles. There is no specific sequen...

The development of the optical tweezers technique has long been accompanied with its application in biological research. When the optical trapping effect was first discovered, Arthur Ashkin observed that bacteria in contaminated water could be trapped at the laser focus1. Since then, bacteria trapping has become an unintentional, fun experiment for generations of biophysics students as well as a serious research tool to study microbial physiology2,3. The optical trapping technique uses focused laser beam to immobilize a microscopic object1. Practically, a laser trap functions as an optical spring, which also measures force (F) on the trapped object by its displacement from the center of the trap (&#916;X). Within a short range, F =&#160; &#954; x&#160; &#916;X, in&#160;&#954; is the spring constant of the trap. The optical trap can be used to exert force in picoNewton (pN) precision to a microscopic object and measure its position with nanometer (nm) accuracy. In the past two decades, optical tweezers have become one of the most used single-molecule techniques in biophysics. The technique has been employed to study folding and mechanics of DNA4-6, RNA7-9, and proteins10,11. Optical tweezers have also been used to observe DNA replication12, RNA transcription13, and protein synthesis14,15, as well as many other biomolecular events16-18.
Single-molecule approaches are employed in RNA structural research mainly to explore the rugged folding energy landscape of RNA. An RNA sequence can usually fold into multiple stable, mutually exclusive structures, due to the simple chemical composition and base paring rules of RNA. It has long been known that RNA structural polymorphism, such as that occurs in riboswitches19,20, plays an important role in gene regulation. A recent genome-wide survey has revealed that temperature variations as small as a few degrees greatly influence structure and protein synthesis of a large portion of the cellular transcriptome21. This example hints that the biological role of alternative RNA folding is perhaps more important and pervasive than previously assumed. Structural polymorphism, however, poses a challenge for the traditional biochemical and biophysical approaches, which examine average properties of many molecules. For example, the &#8220;on&#8221; and &#8220;off&#8221; conformations of a riboswitch are mutually exclusive. An averaged structure derived from heterogeneous structures is not likely to resemble either of the biologically relevant conformers. Moreover, untranslated RNA and mRNA usually form structures. Their interaction with proteins and regulatory RNAs commonly requires unfolding of existing structure as part of the interaction. Therefore, studying RNA unfolding/refolding becomes a pertinent issue of RNA biology. To meet such a challenge, the single-molecule approach has been employed to unravel RNA structural polymorphism by studying one molecule at a time22-27.
As compared to the popular single-molecule fluorescence method, tweezers based mechanical unfolding offers an advantage that conformations of individual molecules can be manipulated by applied force and be measured with nanometer precision. This nanomanipulation capability can be utilized to monitor the unfolding/folding of individual structural domains such that the hierarchical folding of a large RNA can be dissected28. Alternatively, a single strand can be directed to fold into one of several conformers; or an existing structure can be mechanically induced to refold into a different conformation29. Under biological conditions, an RNA structure can be altered upon temperature change or ligand binding. The capability of directly manipulating molecular structure opens a new venue of RNA structural study. In principle, other mechanical techniques, such as atomic force microscope and magnetic tweezers, can also be used to study folding of single RNA molecules. However, such applications are limited largely due to the relatively low spatial resolution30.
The employment of optical tweezers allows RNA structures to be unfolded by mechanical force.
The advantage of mechanical unfolding is several fold. Force can be used to unfold both secondary and tertiary structures, whereas metal ions and ligand induced folding are mainly limited to tertiary structures. Temperature and denaturant can significantly affect the activities of water and solutes. In contrast, force is applied locally to perturb molecular structures; the effect of force on the surrounding environment is negligible. In addition, thermal melting is best used to study folding thermodynamics of small RNA structures, whereas optical tweezers have been used to study RNA structures with various sizes, ranging from a seven-base-pair tetraloop hairpin28 to a 400-nucleotide ribozyme31. Furthermore, RNA structures can be mechanically unfolded at mesophilic temperatures. In contrast, to unfold RNAs in a thermal melting experiment, temperature is typically raised well above physiological temperatures, which significantly increases RNA hydrolysis, especially in the presence of Mg2+ ions.
It is important to note that the mechanical effect of force depends on how it is applied to a structure. The applied force tilts the folding energy landscape. For example, when force is applied to a hairpin, the base pairs are sequentially broken, one at a time (Figure 1a). The ripping fork progresses along the helical axis, which is perpendicular to the applied force. In contrast, when a minimal kissing complex is under tension, the two kissing base pairs, which are parallel to the applied force, share the force load (Figure 1b). The different geometries of the hairpin and kissing complex relative to the applied force result in their different mechanical response, which can be utilized to distinguish secondary and tertiary folding28,32. The theoretic aspect of mechanical unfolding has been previously reviewed8,9,30. This work outlines the basic approaches to set up and perform a single-molecule mechanical unfolding assay.
Experimental Setup. In our mechanical pulling experiment, the RNA sample for tweezing consists of the RNA of interest flanked by two double-stranded DNA/RNA handles (Figure 2)7. The entire molecule can be tethered to two surface-coated micron-size beads (Spherotech) via streptavidin-biotin and digoxigenin-anti-digoxigenin antibody interactions, respectively. One bead is held by a force-measuring optical trap, whereas the other is held on the tip of a micropipette. The relative distance between the beads can be changed by either steering the trap or moving the micropipette. Using this approach, a single RNA molecule tethering the beads can be stretched and relaxed.
Preparation of Samples. The synthesis of RNA samples for tweezing includes a few steps (Figure 3). First, the DNA sequence corresponding to the RNA of interest is first cloned into a plasmid vector. Next, three PCR reactions are performed to generate the two handles and a template for transcription. The transcription template encompasses the handle regions and the inserted sequences. The full length RNA is synthesized by in vitro transcription. Last, the RNA and chemically modified handles are annealed together to generate the molecules for tweezing.
Calibration and Operation of Tweezers. The basic design of the Minitweezers used in this work follows that of the dual-beam optical tweezers33. With many improvements, the Minitweezers display extraordinary stability as compared to the first generation optical tweezers. A number of research groups in several countries use the Minitweezers in their single-molecule research14,15,34-37. The details of construction, calibration, and operation of the device, including instruction videos, are available at the &#8220;Tweezers Lab&#8221; website (http://tweezerslab.unipr.it). Here, improvements and calibration procedures that need to be performed on daily bases are described in detail.

<table border="0" cellpadding="0" cellspacing="0" width="745">
	<tbody>
		<tr height="20">
			<td height="20" style="height:21px;width:249px;">Minitweezers</td>
			<td style="width:211px;">Steven B. Smith Engineering</td>
			<td style="width:119px;"></td>
			<td style="width:167px;"><a href="http://tweezerslab.unipr.it/">http://tweezerslab.unipr.it</a></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Data acquisition card</td>
			<td style="width:211px;">National Instruments</td>
			<td style="width:119px;">USB-6351</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Video card</td>
			<td style="width:211px;">National Instruments</td>
			<td style="width:119px;">PCI-1407</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Labview programming software</td>
			<td style="width:211px;">National Instruments</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">NI Vision Builder</td>
			<td style="width:211px;">National Instruments</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Laser engraver</td>
			<td style="width:211px;">Epilogue laser systems</td>
			<td style="width:119px;">Zing-16</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;"></td>
			<td style="width:211px;"></td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">PCR purification kit</td>
			<td style="width:211px;">Qiagen</td>
			<td style="width:119px;">28104</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:21px;width:249px;">MEGAscript T7 kit</td>
			<td style="width:211px;">Life Technologies</td>
			<td style="width:119px;">AM1334</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">MEGAclear kit</td>
			<td style="width:211px;">Life Technologies</td>
			<td style="width:119px;">AM1908</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Biotin-11-UTP</td>
			<td style="width:211px;">Thermo Fisher</td>
			<td>FERR0081</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">T4 DNA polymerase</td>
			<td style="width:211px;">New England Labs</td>
			<td style="width:119px;">M0203</td>
			<td></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:21px;width:249px;">Streptavidin coated microsphere</td>
			<td style="width:211px;">Spherotech</td>
			<td style="width:119px;">SVP-20-5</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Antidigoxigenin coated microsphere</td>
			<td style="width:211px;">Spherotech</td>
			<td style="width:119px;">DIGP-20-2</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Size standard microspheres</td>
			<td style="width:211px;">Spherotech</td>
			<td style="width:119px;">PPS-6K</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">Kapton tape</td>
			<td style="width:211px;">Kaptontape.com</td>
			<td>KPPTDE-1</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:249px;">No. 2 cover glass</td>
			<td style="width:211px;">Thermo Fisher</td>
			<td style="width:119px;">12-543D</td>
			<td></td>
		</tr>
	</tbody>
</table>

nanomanipulation of single rna molecules by optical tweezers

A large portion of the human genome is transcribed but not translated. In this post genomic era, regulatory functions of RNA have been shown to be increasingly important. As RNA function often depends on its ability to adopt alternative structures, it is difficult to predict RNA three-dimensional structures directly from sequence. Single-molecule approaches show potentials to solve the problem of RNA structural polymorphism by monitoring molecular structures one molecule at a time. This work presents a method to precisely manipulate the folding and structure of single RNA molecules using optical tweezers. First, methods to synthesize molecules suitable for single-molecule mechanical work are described. Next, various calibration procedures to ensure the proper operations of the optical tweezers are discussed. Next, various experiments are explained. To demonstrate the utility of the technique, results of mechanically unfolding RNA hairpins and a single RNA kissing complex are used as evidence. In these examples, the nanomanipulation technique was used to study folding of each structural domain, including secondary and tertiary, independently. Lastly, the limitations and future applications of the method are discussed.

Limited by space, nanomanipulation of single RNA molecules is demonstrated by showing only mechanical unfolding examples of RNA hairpins and an RNA with tertiary structure.
Manipulate Single Hairpin Molecules
Once a tether is established between the beads, extension of and force on the tether can be manipulated using a user-defined protocol. Four common manipulation protocols are commonly used.
Force-ramp Experiment</...

Watch this Scientific Journal Video about Nanomanipulation of Single RNA Molecules by Optical Tweezers at JoVE.com

Nanomanipulation of Single RNA Molecules by Optical Tweezers

Optical tweezers have been used to study RNA folding by stretching individual molecules from their 5&#8217; and 3&#8217; ends. Here common procedures are described to synthesize RNA molecules for tweezing, calibration of the instrument, and methods to manipulate single molecules.

A large portion of the human genome is transcribed but not translated. In this post genomic era, regulatory functions of RNA have been shown to be ...

Research

JoVE Journal

Bioengineering

Stretching Short Sequences of DNA with Constant Force Axial Optical Tweezers

Single-molecule techniques for stretching DNA of contour lengths  less than a kilobase are fraught with experimental difficulties. However, many ...

Multiplexed Single-molecule Force Proteolysis Measurements Using Magnetic Tweezers

The  generation and detection of mechanical forces is a ubiquitous aspect of cell physiology,  with direct relevance to cancer metastasis1, atherogenesis2 ...

In vitro Synthesis of Native, Fibrous Long Spacing and Segmental Long Spacing Collagen

In vitro Synthesis of Native, Fibrous Long Spacing and Segmental Long Spacing Collagen

Collagen fibrils are present in the  extracellular matrix of animal tissue to provide structural scaffolding and  mechanical strength. These native ...

Optical Detection of E. coli Bacteria by Mesoporous Silicon Biosensors

Optical Detection of E. coli Bacteria by Mesoporous Silicon Biosensors

A label-free optical biosensor based on a nanostructured porous Si is designed for rapid capture and detection of Escherichia coli K12 bacteria, as a ...

Use of Label-free Optical Biosensors to Detect Modulation of Potassium Channels by G-protein Coupled Receptors

Ion channels control the electrical properties of neurons and other excitable cell types by selectively allowing ions to flow through the plasma ...

Magnetic Tweezers for the Measurement of Twist and Torque

Single-molecule techniques make it possible to investigate the behavior of individual biological molecules in solution in real time. These techniques ...

Fluorescence Biomembrane Force Probe: Concurrent Quantitation of Receptor-ligand Kinetics and Binding-induced Intracellular Signaling on a Single Cell

Membrane receptor-ligand interactions mediate many cellular functions. Binding kinetics and downstream signaling triggered by these molecular interactions ...

Delivery of Proteins, Peptides or Cell-impermeable Small Molecules into Live Cells by Incubation with the Endosomolytic Reagent dfTAT

Macromolecular delivery strategies typically utilize the endocytic pathway as a route of cellular entry. However, endosomal entrapment severely limits the ...

Label-free Single Molecule Detection Using Microtoroid Optical Resonators

Detecting small concentrations of molecules down to the single molecule limit has impact on areas such as early detection of disease, and fundamental ...

Optical Control of Living Cells Electrical Activity by Conjugated Polymers

Hybrid interfaces between organic semiconductors and living tissues represent a new tool for in-vitro and in-vivo applications. In particular, conjugated ...