Name: production of synthetic nuclear melt glass
Uploaded: 2016-01-04T13:00:01
Description: Watch this Scientific Journal Video about Production of Synthetic Nuclear Melt Glass at JoVE.com

Portions of this study have been previously published in the Journal of Radioanalytical and Nuclear Chemistry.3,13 A patent is pending for this method.

Forsiktig: Prosessen skissert her inkluderer bruk av radioaktivt materiale (for eksempel Uran Nitrat heksahydratet) og flere etsende stoffer. Egnet verneutstyr bør brukes (inkludert laboratoriefrakk, hansker, vernebriller, og en avtrekkshette) under tillagingen. I tillegg bør laboratorie områder som brukes til dette arbeidet overvåkes regelmessig for radioaktiv forurensning. Merk:. De kjemiske forbindelser som trengs er oppført i Tabell 1 Denne formuleringen ble utviklet ved å unders?...

<ol>
	<li>Carnesdale, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Nuclear Forensics: A Capability at Risk (Abbreviated Version). , (2010).</li><li>Garrison, J. R., Hanson, D. E., Hall, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Monte+Carlo+analysis+of+thermochromatography+as+a+fast+separation+method+for+nuclear+forensics.">Monte Carlo analysis of thermochromatography as a fast separation method for nuclear forensics.</a> J Radioanal Nucl Chem. 291 (3), 885-894 (2011).</li><li>Molgaard, J. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+synthetic+nuclear+melt+glass+for+forensic+analysis.">Development of synthetic nuclear melt glass for forensic analysis.</a> J Radioanal Nucl Chem. 304 (3), 1293-1301 (2015).</li><li>Fluegel, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modeling+of+Glass+Liquidus+Temperatures+using+Disconnected+Peak+Functions.">Modeling of Glass Liquidus Temperatures using Disconnected Peak Functions.</a> , (2007).</li><li>Oldham, C. J., Molgaard, J. J., Auxier, J. D., Hall, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+Nuclear+Debris+Surrogates+Using+Powder+X-Ray+Diffraction.">Comparison of Nuclear Debris Surrogates Using Powder X-Ray Diffraction.</a> , (2014).</li><li>Liezers, M., Fahey, A. J., Carman, A. J., Eiden, G. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+formation+of+trinitite-like+surrogate+nuclear+explosion+debris+(+SNED+)+and+extreme+thermal+fractionation+of+SRM-612+glass+induced+by+high+power+CW+CO+2+laser+irradiation.">The formation of trinitite-like surrogate nuclear explosion debris ( SNED ) and extreme thermal fractionation of SRM-612 glass induced by high power CW CO 2 laser irradiation.</a> J Radional Nucl Chem. 304 (2), 705-715 (2015).</li><li>Harvey, S. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Porous+chromatographic+materials+as+substrates+for+preparing+synthetic+nuclear+explosion+debris+particles.">Porous chromatographic materials as substrates for preparing synthetic nuclear explosion debris particles.</a> J Radioanal Nucl Chem. 298 (3), 1885-1898 (2013).</li><li>Hanni, J. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Liquidus+temperature+measurements+for+modeling+oxide+glass+systems+relevant+to+nuclear+waste+vitrification.">Liquidus temperature measurements for modeling oxide glass systems relevant to nuclear waste vitrification.</a> J Mater Res. 20 (12), 3346-3357 (2005).</li><li>Weber, W. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radiation+Effects+in+Glasses+Used+for+Immobilization+of+High-Level+Waste+and+Plutonium+Disposition.">Radiation Effects in Glasses Used for Immobilization of High-Level Waste and Plutonium Disposition.</a> J Mater Res. 12 (8), 1946-1978 (1997).</li><li>Eby, N., Hermes, R., Charnley, N., Smoliga, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Trinitite-the+atomic+rock.">Trinitite-the atomic rock.</a> Geol Today. 26 (5), 180-185 (2010).</li><li>Bellucci, J. J., Simonetti, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nuclear+forensics:+searching+for+nuclear+device+debris+in+trinitite-hosted+inclusions.">Nuclear forensics: searching for nuclear device debris in trinitite-hosted inclusions.</a> J Radioanal Nucl Chem. 293 (1), 313-319 (2012).</li><li>Ross, C. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Optical Properties of Glass from Alamogordo, New Mexico. , (1948).</li><li>Giminaro, A. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Compositional+planning+for+development+of+synthetic+urban+nuclear+melt+glass.">Compositional planning for development of synthetic urban nuclear melt glass.</a> J Radional Nucl Chem. , (2015).</li><li>Cook, M. T., Auxier, J. D., Giminaro, A. V., Molgaard, J. J., Knowles, J. R., Hall, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparison+of+gamma+spectra+from+trinitite+versus+irradiated+synthetic+nuclear+melt+glass.">A comparison of gamma spectra from trinitite versus irradiated synthetic nuclear melt glass.</a> J Radioanal Nucl Chem. , (2015).</li><li>Fahey, J., Zeissler, C. J., Newbury, D. E., Davis, J., Lindstrom, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Postdetonation+nuclear+debris+for+attribution.">Postdetonation nuclear debris for attribution.</a> Proc Natl Acad Sci U S A. 107 (47), 20207-20212 (2010).</li><li>Bellucci, J. J., Simonetti, A., Koeman, E. C., Wallace, C., Burns, P. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+detailed+geochemical+investigation+of+post-nuclear+detonation+trinitite+glass+at+high+spatial+resolution:+Delineating+anthropogenic+vs.+natural+components.">A detailed geochemical investigation of post-nuclear detonation trinitite glass at high spatial resolution: Delineating anthropogenic vs. natural components.</a> Chem Geol. 365, 69-86 (2014).</li><li>Donohue, P. H., Simonetti, A., Koeman, E. C., Mana, S., Peter, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nuclear+Forensic+Applications+Involving+High+Spatial+Resolution+Analysis+of+Trinitite+Cross-Sections.">Nuclear Forensic Applications Involving High Spatial Resolution Analysis of Trinitite Cross-Sections.</a> J Radioanal Nucl Chem. , (2015).</li><li>Eaton, G. F., Smith, D. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Aged+nuclear+explosive+melt+glass:+Radiography+and+scanning+electron+microscope+analyses+documenting+radionuclide+distribution+and+glass+alteration.">Aged nuclear explosive melt glass: Radiography and scanning electron microscope analyses documenting radionuclide distribution and glass alteration.</a> J Radioanal Nucl Chem. 248 (3), 543-547 (2001).</li><li>Kersting, A. B., Smith, D. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Observations of Nuclear Explosive Melt Glass Textures and Surface Areas. , (2006).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> IAEA Safeguards Glossary. , (2001).</li><li>Glasstone, S., Dolan, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Effects of Nuclear Weapons. , (1977).</li><li>Carney, K. P., Finck, M. R., McGrath, C. A., Martin, L. R., Lewis, R. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+development+of+radioactive+glass+surrogates+for+fallout+debris.">The development of radioactive glass surrogates for fallout debris.</a> J Radioanal Nucl Chem. 299 (1), 363-372 (2013).</li><li>Molgaard, J. J., Auxier, J. D., Hall, H. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Comparison+of+Activation+Products+in+Different+Types+of+Urban+Nuclear+Melt+Glass.">A Comparison of Activation Products in Different Types of Urban Nuclear Melt Glass.</a> , (2015).</li></ol>

Notat om trinn 1.2.2 og 1.2.3: Den nøyaktige mengden UNH vil variere avhengig av scenario som simuleres. Planleggings formler som er utviklet av Giminaro et al., Kan anvendes for å velge den riktige massen av uran for en gitt prøve 13 som diskutert i &quot;Eksempel Activation&quot; i dette papiret. Dessuten kan uranoksyd (UO to eller U 3 O 8) brukes i stedet for UNH, hvis tilgjengelig, og massefraksjonen av 235 U i forbindelse (uansett om UNH eller urano...

Concerns over the potential malicious use of nuclear weapons by terrorists or rogue nations have highlighted the importance of nuclear forensics analysis for the purpose of attribution.1 Rapid post-detonation analysis techniques are desirable to shorten the attribution timeline as much as possible. The development and validation of such techniques requires realistic nuclear debris samples for testing. Nuclear testing no longer occurs in the United States and nuclear surface debris from the testing era is not readily available (with the exception of trinitite - the melt glass produced by the first nuclear test at the trinity site) and therefore realistic surrogate debris is needed. 
The primary goal of the method described here is the production of realistic surrogate nuclear debris similar to trinitite. Synthetic nuclear melt glass samples which are readily available to the academic community can be used to test existing analysis techniques and to develop new methods such as thermo-chromatography for rapid post-detonation analysis.2 With this goal in mind the current study is focused on producing samples which mimic trinitite but do not contain any sensitive weapon design information. The fuel and tamper components within these samples are completely generic and the comparison to trinitite is based on chemistry, morphology, and physical characteristics. The similarities between trinitite and the synthetic nuclear melt glass produced in this study have been previously discussed.3
The purpose of this article is to outline the details of the production process used at the University of Tennessee (UT). This production process was developed with two key parameters in mind: 1) the composition of material incorporated into nuclear melt glass, and 2) the melting temperature of the material. Methods exist for estimating the melting temperature of glass forming networks4 and these techniques have been employed here, along with additional experimentation to determine the optimal processing temperature for the trinitite matrix.5
Alternative methods for surrogate debris production have been published recently. The use of high power lasers has the advantage of creating sufficiently high temperatures to cause elemental fractionation within the target matrix.6 Porous chromatographic substrates have been used to produce small particles similar to fallout particles using condensed phase methods7. The latter method is most useful for producing particulate debris (nuclear fallout) and has been demonstrated with natural metals. The advantages of the method presented here are 1) simplicity, 2) reproducibility, and 3) scalability (sample sizes can range from tiny beads to large chunks of melt glass). Also, this method is expandable both in terms of production output and variety of explosive scenarios covered, and it has already been demonstrated using radioactive materials. A sample has been successfully activated at the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). Natural uranium compounds were added to the matrix prior to melting and fission products were produced in situ by neutron irradiation. 
Methods within the glass making industry and those employed for the purpose of radioactive waste immobilization8 have been consulted in the development of the method presented here. The unique effects of radiation in glasses are of inherent interest9 and will constitute an important area of study as this method is further developed. 
The method described below is appropriate for any application where a bulk melt glass sample is desired. These samples most closely resemble the material found near the epicenter of a nuclear explosion. Samples of various sizes can be produced, however, methods employing plasma torches or lasers will be more useful for simulating fine particulate debris. Also, commercial HTFs do not reach temperatures high enough to cause elemental fractionation for a wide range of elements. This method should be employed when physical and morphological characteristics are of primary importance.

<table border="0" cellpadding="0" cellspacing="0" width="1019">
	<tbody>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">High Temperature Furnace (HTF)</td>
			<td style="width:200px;">Carbolite</td>
			<td style="width:119px;">HTF 18</td>
			<td style="width:469px;">1800C HTF used to melt samples</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">High Temperature Drop Furnace</td>
			<td style="width:200px;">CM Inc.</td>
			<td style="width:119px;">1706 BL</td>
			<td>1700C Drop Furnace used to melt samples</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Graphite Crucibles</td>
			<td style="width:200px;">SCP Science</td>
			<td style="width:119px;">040-060-041</td>
			<td>27 mL high purity graphite crucibles (10 pack)</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Crucible Tongs</td>
			<td style="width:200px;">Grainger</td>
			<td style="width:119px;">5ZPV0</td>
			<td>26 in, stainless steele tongs for handling crucibles</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Heat Resistent Gloves</td>
			<td style="width:200px;">Grainger</td>
			<td style="width:119px;">8814-09</td>
			<td>Gloves used to protect hands from heat during sample intro/removal</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Mortar &#38; Pestle</td>
			<td style="width:200px;">Fisherbrand</td>
			<td style="width:119px;">S337631</td>
			<td>300 mL, Ceramic mortar and pestle for powdering and mixing</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Micro Balance</td>
			<td style="width:200px;">Grainger</td>
			<td style="width:119px;">8NJG2</td>
			<td>220g Cap, high precision scale for measuring powder mass</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Spatulas</td>
			<td style="width:200px;">Fisherbrand</td>
			<td style="width:119px;">14374</td>
			<td>Metal spatulas for measure small quantities of powder</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">SiO2</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">274739-5KG</td>
			<td>Quartz Sand&#160; CAS Number: 14808-60-7</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Al2O3</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">11028-1KG</td>
			<td>Aluminum Oxide Powder&#160; CAS Number: 1344-28-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">CaO</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">12047-2.5KG</td>
			<td>Calcium Oxide Powder&#160; CAS Number: 1305-78-8</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">FeO</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">400866-25G</td>
			<td>Iron Oxide Powder&#160; CAS Number: 1345-25-1</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">MgO</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">342793-250G</td>
			<td>Magnesium Oxide Powder&#160; CAS Number: 1309-48-4</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">Na2O</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">36712-25G</td>
			<td>Sodium Oxide Powder&#160; CAS Number: 1313-59-3</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;">KOH</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">278904-250G</td>
			<td>Potasium Hydroxide Pellets&#160; CAS Number: 12030-88-5</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">MnO</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">377201-500G</td>
			<td>Manganese Oxide Powder&#160; CAS Number: 1344-43-0</td>
		</tr>
		<tr height="26">
			<td height="26" style="height:27px;width:231px;">TiO2</td>
			<td style="width:200px;">Sigma-Aldrich</td>
			<td style="width:119px;">791326-5G</td>
			<td>Titanium Oxide Beads&#160; CAS Number: 12188-41-9</td>
		</tr>
	</tbody>
</table>

production of synthetic nuclear melt glass

Realistic surrogate nuclear debris is needed within the nuclear forensics community to test and validate post-detonation analysis techniques. Here we outline a novel process for producing bulk surface debris using a high temperature furnace. The material developed in this study is physically and chemically similar to trinitite (the melt glass produced by the first nuclear test). This synthetic nuclear melt glass is assumed to be similar to the vitrified material produced near the epicenter (ground zero) of any surface nuclear detonation in a desert environment. The process outlined here can be applied to produce other types of nuclear melt glass including that likely to be formed in an urban environment. This can be accomplished by simply modifying the precursor matrix to which this production process is applied. The melt glass produced in this study has been analyzed and compared to trinitite, revealing a comparable crystalline morphology, physical structure, void fraction, and chemical composition.

De ikke-radioaktive prøver produsert i denne studien har blitt sammenlignet med trinitite og figurene 1-3 viser at de fysiske egenskaper og morfologi er faktisk like. Figur 1 gir bilder som avslører likheter i farge og tekstur som er observert på makroskopisk nivå. Figur 2 viser elektronmikroskop (SEM) Sekundære Electron (SE) bilder som avslører lignende funksjoner på micron nivå. SEM-analyse ble utført ved anvendelse av en SEM og SEM-programva...

Watch this Scientific Journal Video about Production of Synthetic Nuclear Melt Glass at JoVE.com

Production of Synthetic Nuclear Melt Glass

A protocol for the production of synthetic nuclear melt glass, similar to trinitite, is presented.

Produksjon av syntetisk Nuclear smelte glass

Realistic surrogate nuclear debris is needed within the nuclear forensics community to test and validate post-detonation analysis techniques. Here we ...

Research

JoVE Journal

Engineering

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Elektro Nedfall av jevn tykkelse Ge<sub&gt; 23</sub&gt; Sb<sub&gt; 7</sub&gt; S<sub&gt; 70</sub&gt; Og As<sub&gt; 40</sub&gt; S<sub&gt; 60</sub&gt; Chalcogenide Glass Films

Solution-based electrospray film deposition, which is compatible with continuous, roll-to-roll processing, is applied to chalcogenide glasses. Two ...

Applying X-ray Imaging Crystal Spectroscopy for Use as a High Temperature Plasma Diagnostic

Bruk av X-ray Imaging Crystal spektroskopi for bruk som en High Temperature Plasma Diagnostic

X-ray spectra provide a wealth of information on high temperature plasmas; for example electron temperature and density can be inferred from line ...

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics

Innendørs eksperimentelle vurdering av effektiviteten og Irradians flekk av akromatisk Doublet på Glass (ADG) Fresnel-linse for konsentrere solcellepanel

We present a method to characterize achromatic Fresnel lenses for photovoltaic applications. The achromatic doublet on glass (ADG) Fresnel lens is ...

Production and Characterization of Vacuum Deposited Organic Light Emitting Diodes

Produksjon og karakterisering av vakuum avsatt Organic Light Emitting Diodes lysemitterende

A method for producing simple and efficient thermally-activated delayed fluorescence organic light-emitting diodes (OLEDs) based on guest-host or exciplex ...

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Methods of Ex Situ and In Situ Investigations of Structural Transformations: The Case of Crystallization of Metallic Glasses

Ex-Situ og In Situ undersøkelser av strukturelle transformasjoner: tilfelle av krystallisering av metallisk briller

We demonstrate the use of two nuclear-based analytical methods that can follow the modifications of microstructural arrangement of iron-based metallic ...

Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures

Optimert tetting forarbeide og virkelig-tid avlytting av glass-å-metallisk sel strukturer

Residual stress is an essential factor to keeping the hermeticity and robustness of a glass-to-metal seal structure. The purpose of this report is to ...

Production of a Strain-Measuring Device with an Improved 3D Printer

Produksjon av en belastningsmålingsenhet med en forbedret 3D-skriver

A traditional strain measurement sensor needs to be electrified and is susceptible to electromagnetic interference. In order to solve the fluctuations in ...

Twin-Screw Extrusion Process to Produce Renewable Fiberboards

Toskrue ekstruderingsprosess for å produsere fornybare fiberplater

A versatile twin-screw extrusion process to provide an efficient thermo-mechano-chemical pre-treatment on lignocellulosic biomass before using it as ...

Glass-Based Devices to Generate Drops and Emulsions

Glassbaserte enheter for å generere dråper og emulsjoner

In this manuscript, three different step-by-step protocols to generate highly monodisperse emulsion drops using glass-based microfluidics are described. ...

Fabrication and Mechanical Property Assessment of Fiber Composite Laminates

Measuring the Mechanical Properties of Glass Fiber Reinforcement Polymer Composite Laminates Obtained by Different Fabrication Processes

Enhancing Fiber Composite Laminate Quality with the Wet Hand Lay-Up/Vacuum Bag Process (Video) | JoVE

Måling av de mekaniske egenskapene til glassfiberarmering polymerkomposittlaminater oppnådd ved forskjellige fabrikasjonsprosesser

The traditional wet hand lay-up process (WL) has been widely applied in the manufacturing of fiber composite laminates. However, due insufficiency in the ...