Name: gradient strain chip for stimulating cellular behaviors in cell-laden hydrogel
Uploaded: 2017-08-08T12:30:00
Description: Watch this Scientific Journal Video about Gradient Strain Chip for Stimulating Cellular Behaviors in Cell-laden Hydrogel at JoVE.com

Ce projet a été soutenu par la Graduate Student étude à l’étranger programme (NSC-101-2917-I-007-010) ; le programme de génie biomédical (NSC-101-2221-E-007-032-MY3) ; et le Programme National de nanotechnologie (NSC-101-2120-M-007-001-), Conseil National des sciences de la République de Chine, Taïwan. Les auteurs tiens à remercier le professeur Ali Khademhosseini, Gulden Cantin-Unal, Arghya Paul et Ronglih Liao à la Harvard Medical School pour le partage de la technologie d’encapsulation hydrogel et cellulaire.

1. GelMA Synthesis
<ol>
	<li>Weigh 10 g of gelatin powder and add it to a glass flask with 100 mL ofDulbecco&#39;s phosphate-buffered saline (DPBS). Put a magnetic stir bar into the flask and place the flask on a stirring hot plate.</li>
	<li>Cover the flask with aluminum foil to avoid water evaporation. Set the hot plate temperature to 50-60 &#176;C and the stirrer at 100 rpm for 1 h to dissolve the gelatin powder well.</li>
	<li>After the gelatin has dissolved, add 8 mL of methacrylic anhydride very slowly (one drop ...

<ol>
	<li>Simmons, C. S., Petzold, B. C., Pruitt, B. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microsystems+for+biomimetic+stimulation+of+cardiac+cells.">Microsystems for biomimetic stimulation of cardiac cells.</a> Lab Chip. 12 (18), 3235-3248 (2012).</li><li>Aubin, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Directed+3D+cell+alignment+and+elongation+in+microengineered+hydrogels.">Directed 3D cell alignment and elongation in microengineered hydrogels.</a> Biomaterials. 31 (27), 6941-6951 (2010).</li><li>Guan, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+stimulation+of+the+cardiac+differentiation+of+mesenchymal+stem+cells+in+tissue+constructs+that+mimic+myocardium+structure+and+biomechanics.">The stimulation of the cardiac differentiation of mesenchymal stem cells in tissue constructs that mimic myocardium structure and biomechanics.</a> Biomaterials. 32 (24), 5568-5580 (2011).</li><li>Wan, C. R., Chung, S., Kamm, R. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differentiation+of+embryonic+stem+cells+into+cardiomyocytes+in+a+compliant+microfluidic+system.">Differentiation of embryonic stem cells into cardiomyocytes in a compliant microfluidic system.</a> Ann Biomed Eng. 39 (6), 1840-1847 (2011).</li><li>Huh, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reconstituting+organ-level+lung+functions+on+a+chip.">Reconstituting organ-level lung functions on a chip.</a> Science. 328 (5986), 1662-1668 (2010).</li><li>Li, X., Chu, J. S., Yang, L., Li, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anisotropic+effects+of+mechanical+strain+on+neural+crest+stem+cells.">Anisotropic effects of mechanical strain on neural crest stem cells.</a> Ann. Biomed. Eng. 40 (3), 598-605 (2012).</li><li>Butcher, J. T., Barrett, B. C., Nerem, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Equibiaxial+strain+stimulates+fibroblastic+phenotype+shift+in+smooth+muscle+cells+in+an+engineered+tissue+model+of+the+aortic+wall.">Equibiaxial strain stimulates fibroblastic phenotype shift in smooth muscle cells in an engineered tissue model of the aortic wall.</a> Biomaterials. 27 (30), 5252-5258 (2006).</li><li>Ramon-Azcon, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gelatin+methacrylate+as+a+promising+hydrogel+for+3D+microscale+organization+and+proliferation+of+dielectrophoretically+patterned+cells.">Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells.</a> Lab Chip. 12 (16), 2959-2969 (2012).</li><li>Park, S. H., Sim, W. Y., Min, B. H., Yang, S. S., Khademhosseini, A., Kaplan, D. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chip-Based+Comparison+of+the+Osteogenesis+of+Human+Bone+Marrow-+and+Adipose+Tissue-Derived+Mesenchymal+Stem+Cells+under+Mechanical+Stimulation.">Chip-Based Comparison of the Osteogenesis of Human Bone Marrow- and Adipose Tissue-Derived Mesenchymal Stem Cells under Mechanical Stimulation.</a> PLoS One. 7 (9), e46689 (2012).</li><li>Gould, R. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyclic+Strain+Anisotropy+Regulates+Valvular+Interstitial+Cell+Phenotype+and+Tissue+Remodeling+in+3D+Culture.">Cyclic Strain Anisotropy Regulates Valvular Interstitial Cell Phenotype and Tissue Remodeling in 3D Culture.</a> Acta Biomater. 8 (5), 1710-1719 (2012).</li><li>Kurpinski, K., Chu, J., Hashi, C., Li, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proc+Anisotropic+mechanosensing+by+mesenchymal+stemcells.">Proc Anisotropic mechanosensing by mesenchymal stemcells.</a> Natl Acad Sci USA. 103 (44), 16095-16100 (2006).</li><li>Sim, W. Y., Park, S. W., Park, S. H., Min, B. H., Park, S. R., Yang, S. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+pneumatic+micro+cell+chip+for+the+differentiation+of+human+mesenchymal+stem+cells+under+mechanical+stimulation.">A pneumatic micro cell chip for the differentiation of human mesenchymal stem cells under mechanical stimulation.</a> Lab Chip. 7 (12), 1775-1782 (2007).</li><li>Vader, D., Kabla, A., Weitz, D., Mahadevan, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strain-Induced+Alignment+in+Collagen+Gels.">Strain-Induced Alignment in Collagen Gels.</a> PLoS One. 4 (6), e5902 (2009).</li><li>Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., Heilshorn, S. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+viability+of+stem+cells+during+syringe+needle+flow+through+the+design+of+hydrogel+cell+carriers.">Improving viability of stem cells during syringe needle flow through the design of hydrogel cell carriers.</a> Tissue Eng Part A. 18 (7-8), 806-815 (2012).</li><li>Wan, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic-Based+Synthesis+of+Hydrogel+Particles+for+Cell+Microencapsulation+and+Cell-Based+Drug+Delivery.">Microfluidic-Based Synthesis of Hydrogel Particles for Cell Microencapsulation and Cell-Based Drug Delivery.</a> Polymers. 4 (2), 1084-1108 (2012).</li><li>Moraes, C., Wang, G., Sun, Y., Simmons, C. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+microfabricated+platform+for+high-throughput+unconfined+compression+of+micropatterned+biomaterial+arrays.">A microfabricated platform for high-throughput unconfined compression of micropatterned biomaterial arrays.</a> Biomaterials. 31 (3), 577-584 (2010).</li><li>Keung, A. J., Kumar, S., Schaffer, D. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Presentation+Counts:+Microenvironmental+Regulation+of+Stem+Cells+by+Biophysical+and+Material.+Cues.">Presentation Counts: Microenvironmental Regulation of Stem Cells by Biophysical and Material. Cues.</a> Annu Rev Cell Dev Biol. 26, 533-556 (2010).</li><li>Segers, V. F., Lee, R. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stem-cell+therapy+for+cardiac+disease.">Stem-cell therapy for cardiac disease.</a> Nature. 451 (7181), 937-942 (2008).</li><li>Hsieh, H. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gradient+static-strain+stimulation+in+a+microfluidic+chip+for+3D+cellular+alignment.">Gradient static-strain stimulation in a microfluidic chip for 3D cellular alignment.</a> Lab Chip. 14 (3), 482-493 (2014).</li></ol>

Dans cet article, nous présentons une approche simple de comparer le comportement de l’alignement de cellule après orientation forme hydrogel et stretch traction. Une membrane souple de PDMS crée une courbe en forme de dôme pour générer les différentes hauteurs des hydrogels circulaires concentriques. Après avoir relâché la pression, la membrane PDMS applique automatiquement la force pour les hydrogels micro à motifs pour former la souche dégradé/allongement, avec un maximum au centre et au moins à la lim...

Agissant comme un matériel de bloc qui imite un micro-environnement natif, un hydrogel contenant la matrice extracellulaire (ECM) peut reconstruire biomimétique tissu échafaudages pour soutenir la croissance des cellules. Pour posséder les fonctions d’un tissu, alignement de cellule organisée est une condition essentielle. 2D (c'est-à-dire les cellules cultivées sur une surface) et 3D (c.-à-d. les cellules encapsulées dans un hydrogel) divers alignements de cellules ont été obtenues en culture ou d’encapsulation des cellules dans ou sur des substrats flexibles avec micro- ou nano-modèles1. Alignement de cellule 3D en microarchitecture est plus attrayant, car le microenvironnement est plus proche au tissu native construct2,3,4. Une approche courante pour l’alignement de la cellule 3D est le repère géométrique de l’hydrogel forme2,3. En raison de l’espace restreint de la prolifération cellulaire dans la direction de l’axe court, cellules visent à aligner le long de la direction de l’axe dans un hydrogel micro à motifs. Une autre approche consiste à appliquer la traction extensible pour les hydrogels à obtenir un alignement de cellule parallèle à la direction extensibles4,5.
Stimulation biophysique sur ECM hydrogels, comme souche de compression ou un champ électrique, peut réguler les fonctions des cellules pour l’intégration tissulaire adéquate, la prolifération et la différenciation1,2,3. Beaucoup de recherches ont été effectuée pour étudier comportement cellulaire en appliquant une condition de déformation à l’aide de plusieurs unités de contrôle mécanique4,6,7,8,9. Par exemple, l’utilisation des moteurs mécaniques pas pressé ou tendu sur un hydrogel de collagène de cellules encapsulées 3D a été une approche commune7,10. Toutefois, ce dispositif contrôle nécessite plus d’espace et fait face à la question de la contamination dans l’incubateur7,9,11,12. En outre, le grand instrument ne peut pas donner un environnement de contrôle précis pour fournir la reproductibilité élevée13.
Étant donné que chargés de cellule hydrogels travaillent habituellement à l’échelle micro pour des applications biomédicales, il est avantageux de combiner les techniques de MEMS pour générer un ensemble de souche/tronçon stimulation d’étudier simultanément les comportements cellulaires en biomimétique 3D constructions in vitro2,14,15,16,17,18. Par exemple, en utilisant la pression de gaz pour déformer la membrane PDMS de puces microfluidiques peut donner lieu à différentes souches, la différenciation cellulaire au volant de différentes lignées9,16. Cependant, il y a de nombreux défis techniques, tels que les procédés de fabrication de puces compliquée dans une salle blanche et de l’intégration de contrôle de logiciel des moteurs, pompes, vannes et les gaz comprimés.
Dans ce travail, nous démontrons une approche simple pour obtenir une puce microfluidique gradient de déformation statique autosuffisante en employant un modèle hydrogel circulaires concentriques et une membrane souple de PDMS. Contrairement à la plupart des approches existantes, notre plate-forme est un appareil miniature portable et jetable qui peut être fabriqué à l’extérieur de la chambre jaune et qui possède des souches dégradés sur concentriques hydrogels cellule encapsulée, sans équipement mécanique externe au cours de l’incubation de l’auto-production. Comportements de cellules fibroblastes 3 t 3 influencé par une combinaison de forme hydrogel et une variété des repères d’orientation stretch traction ont été démontrées lors de l’observation de l’alignement de la cellule dans des environnements 3D ECM-mimétique à la puce de souche dégradé pendant 3 jours.

<table border="0" cellpadding="0" cellspacing="0" width="1383">
	<tbody>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">1.5-mL black microcentrifuge tube</td>
			<td style="width:225px;">Argos Technologies&#160;</td>
			<td style="width:156px;">03-391-161</td>
			<td style="width:665px;">This one can be replaced with a neutral color of 1.5-mL tube covered with aluminun foil</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">10X DPBS</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">56064C</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Alexa Fluor 488 phalloidin&#160;</td>
			<td style="width:225px;">Invitrogen</td>
			<td style="width:156px;">A12379&#160;</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">BSA</td>
			<td style="width:225px;">Sigma</td>
			<td style="width:156px;">A1595</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Calcein</td>
			<td style="width:225px;">Molecular Probe</td>
			<td style="width:156px;">C1430</td>
			<td style="width:665px;">For labeling viable cells</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">CCD</td>
			<td style="width:225px;">PCO. Imaging</td>
			<td style="width:156px;">Pixelfly qe</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Cell membrane permeating solution</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">X100</td>
			<td style="width:665px;">0.5% Triton X-100 for permeating cell membrane</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">DAPI</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">D8417</td>
			<td style="width:665px;">Cell nucleus staining</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Dialysis membrane</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">D9527</td>
			<td style="width:665px;">Molecular weight cut-off = 14,000</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">DMEM</td>
			<td style="width:225px;">Gibco</td>
			<td style="width:156px;">11995-065</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Double-side tape</td>
			<td style="width:225px;">3M</td>
			<td style="width:156px;">8003</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">FBS</td>
			<td style="width:225px;">Hyclone</td>
			<td style="width:156px;">SH30071.03</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Gelatin</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">G2500</td>
			<td style="width:665px;">gel strength 300, type A, from porcine skin</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">High frequency electronic corona generator</td>
			<td style="width:225px;">Electro-technic products</td>
			<td style="width:156px;">MODEL BD-20</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Methacrylic Anhydride</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">276685</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Micro syringe</td>
			<td style="width:225px;">Hamilton</td>
			<td style="width:156px;">80501</td>
			<td style="width:665px;">50 &#956;L&#160;</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Microscope</td>
			<td style="width:225px;">Olympus</td>
			<td style="width:156px;">IX71</td>
			<td style="width:665px;">Include two filter sets: LF405/LP-B-000 and LF488/LP-C-000 from Semrock</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Oxygen plasma machine</td>
			<td style="width:225px;">Harrick plasma</td>
			<td style="width:156px;">PDC-001</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Paraformaldehyde</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">P6148</td>
			<td style="width:665px;">For fixing cell</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">PDMS</td>
			<td style="width:225px;">DOW CORNING</td>
			<td style="width:156px;">Sylgard 184</td>
			<td style="width:665px;">Mixture for PDMS chip cast-molding fabrication</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Pen-Strep</td>
			<td style="width:225px;">Gibco</td>
			<td style="width:156px;">10378-016</td>
			<td style="width:665px;">penicillin/streptomycin</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Photoinitiator</td>
			<td style="width:225px;">CIBA</td>
			<td style="width:156px;">Irgacure 2959</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Propidium iodide</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">P4170</td>
			<td style="width:665px;">For labeling dead cells</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Sterile Filtration cup</td>
			<td style="width:225px;">Millipore</td>
			<td style="width:156px;">SCGPT05RE</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">TMSPMA</td>
			<td style="width:225px;">Sigma-Aldrich</td>
			<td style="width:156px;">440159</td>
			<td style="width:665px;">For hydrogel immobilization</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Ultrasonicator</td>
			<td style="width:225px;">Delta</td>
			<td style="width:156px;">D150H</td>
			<td style="width:665px;">150W, 43kHz</td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">UV light</td>
			<td style="width:225px;">DAIHAN</td>
			<td style="width:156px;">WUV-L10</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">Freeze Dryer</td>
			<td style="width:225px;">FIRSTEK</td>
			<td style="width:156px;">150311025</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">NIH3T3(fibroblast)</td>
			<td style="width:225px;">Food Industry Research and Development Institute(FIRDI)</td>
			<td style="width:156px;">08C0011</td>
			<td style="width:665px;"></td>
		</tr>
		<tr height="24">
			<td height="24" style="height:24px;width:337px;">MOXI Z Mini Automated Cell Counter</td>
			<td style="width:225px;">ORFLO</td>
			<td style="width:156px;">MXZ001</td>
			<td style="width:665px;"></td>
		</tr>
	</tbody>
</table>

gradient strain chip for stimulating cellular behaviors in cell-laden hydrogel

Guide artificiel pour alignement cellulaire est un sujet d’actualité dans le domaine de l’ingénierie tissulaire. La plupart de la recherche antérieure a enquêté sur alignement cellulaire induite par la souche unique, sur un hydrogel de cellules chargées en utilisant des procédés expérimentaux complexes et massive, contrôle des systèmes, qui sont généralement associés aux problèmes de contamination. Ainsi, dans cet article, nous proposons une approche simple pour renforcer un gradient allongement statique à l’aide d’une puce fluidique avec un couvercle en plastique de PDMS et un substrat de verre transparent UV pour la stimulation du comportement cellulaire dans un hydrogel en 3D. Prépolymère de cellule photo-en surcharge dans la chambre fluidique peut générer une membrane PDMS courbe convexe sur la couverture. Après réticulation UV, grâce à une composition circulaire concentrique sous la membrane PDMS incurvé et tampon de lavage, un micro-environnement pour cellule chargée de l’enquête comportements sous une variété de souches dégradés est autonome établie sur un seul circuit fluidique, sans instruments externes. Les cellules NIH3T3 ont été démontrées après avoir observé le changement dans la tendance de l’alignement cellulaires sous la direction de géométrie, en collaboration avec stimulation de souche, qui variait de 15 à 65 % sur hydrogels. Après 3 jours d’incubation, la géométrie de l’hydrogel a dominé l’alignement de la cellule sous contrainte de compression faible, où les cellules alignement le long de la direction d’élongation hydrogel sous contrainte de compression élevé. Entre eux, les cellules ont montré alignement aléatoire en raison de la dissipation de l’orientation radicale de l’allongement de l’hydrogel et la direction de la géométrie de l’hydrogel à motifs.

Pour comparer les variations mécaniques entre chaque hydrogel circulaire dans la puce de stimulation souche gradient dûment rempli, nous avons mesuré la largeur de chaque circulaire hydrogel dans deux des puces mêmes, avec des volumes d’injection 0 µl (Figure 4 a) et 40 µL (Figure 4 b), respectivement. Les allongements pour cent à chaque cercle ont été calculés en divisant les allongements dans la puce 40 µL-injecté...

Watch this Scientific Journal Video about Gradient Strain Chip for Stimulating Cellular Behaviors in Cell-laden Hydrogel at JoVE.com

Gradient Strain Chip for Stimulating Cellular Behaviors in Cell-laden Hydrogel

Cet article présente une approche simple non continu dégradés souches statiques sur un hydrogel concentrique chargés de cellule pour réguler l’alignement de la cellule pour l’ingénierie tissulaire.

Gradient de déformation puce pour des comportements cellulaires stimulants en Hydrogel chargés de cellule

Artificial guidance for cellular alignment is a hot topic in the field of tissue engineering. Most of the previous research has investigated single ...

The overall goal of this gradient strain chip is to provide a simple approach to generate non continuous gradient static strains on a 3D hydrogel for the investigation of cell behaviors under a series of strain conditions. This method can help answer key questions in the bioengineering field such as the stimulations of a stem cell differentiation and the regulation of cellular alignment for artificial tissue organ development. The main advantage of this technique is that various strains can be applied on the cell layer and hydrogels in the same micro environment for comparison of cell behavior.Visual demonstration of this method is critical as the chip preparation steps are difficult to learn since the light should be complete in three to four hours for base of experiment to ensure high cell variability. Weigh 10 grams of gelatin powder and add it to a glass flask with 100 milliliters of Dulbecco's phosphate buffered saline, or DPBS. Put a magnetic stir bar into the flask and place the flask on a stirring hot plate.Cover the flask with aluminum foil to avoid water evaporation. Set the hot plate temperature to 50 to 60 degrees and the stirrer at 100 RPM for one hour to dissolve the gelatin powder. After the gelatin has dissolved, add eight milliliters of methacrylic anhydride very slowly using a pipette.Let it react at 60 degrees Celsius for three hours. Then add prewarmed DPBS into the flask to a final volume of 500 milliliters. Allow the solution to mix well for 15 minutes to stop the reaction.Meanwhile cut a dialysis membrane into several 25 millimeter long tubes. Immerse them in deionized water for 15 minutes. And make a knot to close one end of the dialysis tubes.Load the appropriate amount of the polymer solution into the dialysis tubes and close the other end. Then place the filled tubes in a five liter plastic beaker with deionized water for a week. Renew the deionized water twice a day and maintain the solution at 40 to 50 degrees Celsius during the dialysis process.Following dialysis collect the solution from the tubes into a 500 milliliter glass bottle. Pour approximately 450 to 500 milliliters of solution into a 500 milliliter filter cup. And apply a vacuum to force the solution to pass through the filter membrane for sterilization.Then transfer the sterilized polymer into several 50 milliliter sterilized tubes. Transfer the sterilized polymer into several 50 milliliter sterilized tubes and store them in a minus 80 degrees Celsius freezer for three to five days. Freeze dry the minus 80 degrees Celsius polymer for one week using a freeze drier to form GelMA which can then be stored in a minus 80 degree Celsius freezer.For chip fabrication first prepare the polymethacrylate or PMMA, played and molded as described in the text protocol. Then prepare the PTMS cover and PTMS plug by properly mixing 30 grams of PTMS elastomer and three grams of PTMS curing agent. Degas the mixture under a vacuum chamber for one hour.Cast 1.8 to two grams of the mixture into the PMMA mold for the PTMS cover. Also use the appropriate amount to fill each cavity for the PMMA mold for the PTMS plug. In addition cast 10 grams of uncured PTMS mixture in a blank 10 centimeter plastic plate.Put these molds in a vacuum chamber to degas for 30 minutes. Cure the PTMS for two hours at 80 degrees Celsius. After cooling down the cured PTMS on the mold, detach the PTMS covers and the PTMS plugs from the PMMA molds.Next punch two holes with diameters of about three millimeters at the ends of the flow channels of the PTMS covers. Cut the PTMS sheet molded from the 10 centimeter plastic plate into many one centimeter by one centimeter cubes. And punch a three millimeter hole in each PTMS cube.Glue two uncured one centimeter by one centimeter PTMS cubes onto the openings of the PTMS cover to serve as medium reservoirs and to aid in the curing process of the gradient circular hydrogel patterns. Then cure for one hour at 80 degrees Celsius. Next bond the PTMS covers with the two PTMS reservoirs onto a TMSPMA coated slide.To do so, pretreat the bonding side of the PTMS cover and the TMSPMA coated slide under an oxygen plasma machine for 90 seconds of oxygen plasma treatment. Contact the plasma treated surface of the PTMS covers and the TMSPMA slide and press them closely for permanent bonding through the formation of the silicon oxygen silicon bond. Print a photomask by printing the established layout on a transparent film.Then cut the printed photomask to 25 millimeters by 37.5 millimeters in size. Weigh 25 milligrams of freeze dried GelMA into 0.3 milliliters of prewarmed cell culture medium in a 1.5 milliliter black microcentrifuge tube. Put the microcentrifuge tube on a laboratory stirrer hot plate until the GelMA dissolves in the medium.Add 50 milligrams of photoinitiator to one milliliters of DPBS in a microcentrifuge tube. And place it in an 80 degree Celsius oven for 15 minutes or until the photoinitiator has dissolved. Add 25 microliters of the 10%photoinitiator to the microcentrifuge tube.Pipette several times to mix well. Next count three million NIH3T3 cells using an automated cell counter. After centrifuging the suspension at 200 Gs for five minutes discard the supernatant and resuspend the cells in 175 microliters of cell culture medium.Add the cell solution to the microcentrifuge tube to get a pre polymer cell solution of 5%GelMA, 0.5%photoinitiator and about six million 3T3 cells per milliliter. After mixing load 100 microliters of cell prepolymer into a 100 microliter microsyringe. Manually align a piece of the photomask onto the bottom slide of the sterilized gradient strain chip.And simply fix the position using a small drop of deionized water in between. Connect the 100 microliter microsyringe, loaded with prepolymer cell solution to the inlet of the chip. Then place 50 microliters of prepolymer cell solution in the flow channel using the microsyringe and plug the outlet using a PTMS plug.Inject an extra 40 microliters of solution to create a convex bulge in the circular PTMS membrane. Move the chip with the photomask, microsyringe, and PTMS plug to under a UV lamp. And expose it for 30 to 45 seconds to cross link the concentric circular hydrogel in the fluidic chamber.After cross linking remove the PTMS plug and the microsyringe to release the liquid pressure. Use a one milliliter syringe loaded with prewarmed DPBS to wash out uncrosslinked resins three times by flushing from the inlet to the outlet. Next fill the flow channel with about 100 microliters of cell culture medium.Place the chip in a sterilized culture dish and culture in a 5%carbon dioxide atmosphere at 37 degrees Celsius for a week. Refresh the medium every day. Take images of three chips on day zero after four hours of incubation as the control group.And three chips on day three as the experimental set using a microscope with a 20 times objective. Measure the line width of each hydrogel from line one to line 12 using software to calculate the compress stains. Shown here are representative results of hydrogel patterns with zero microliter and 40 microliters over injection, after UV cross linking and four hour incubation.The line width of the 3D hydrogel in the non over injection control looks uniform as expected. However the hydrogel patterns with 40 microliters over injection gives a gradient line width of hydrogels decreasing from line one to line 12. After three days of incubation, the cells in the hydrogel extend to different directions.The cells in line one align along the radial direction due to the stimulation of hydrogel elongation. On the contrary the cells in line 12 align along the hydrogel shape where the geometry cue dominates the cellular alignment. There is no specific cell alignment in line 7 where the two cellular alignment cues of line one and line 12 balance each other out.Once measuring the micro environment of gradient strains on 3D hydrogel can be done by the gradient strain chip in two hours if it's performed properly. While attempting this procedure, it is important to remember to sterilize the gradient strain chip before loading the cell prepolymer solution. Also thoroughly wipe the surface of the chip with 75%ethanol before placing the chips into the cell culture incubator.After watching this video you should have a very good understanding of how to generate a gradient strain chip to investigate cell behaviors under different strains imperial.

Research

JoVE Journal

Bioengineering

Encapsulation of Cardiomyocytes in a Fibrin Hydrogel for Cardiac Tissue Engineering

L&#39;encapsulation des cardiomyocytes dans un hydrogel de fibrine pour l&#39;ingénierie du tissu cardiaque

Culturing cells in a three dimensional hydrogel environment is an important technique for developing constructs for tissue engineering as well as studying ...

Recherche

Bio-ingénierie

Cellular Lipid Extraction for Targeted Stable Isotope Dilution Liquid Chromatography-Mass Spectrometry Analysis

L&#39;extraction des lipides cellulaires pour ciblées dilution isotopique stable analyse de spectrométrie de masse chromatographie liquide-

The metabolism of fatty acids, such as arachidonic acid (AA) and linoleic acid (LA), results in the formation of oxidized bioactive lipids, including ...

Electrotaxis Studies of Lung Cancer Cells using a Multichannel Dual-electric-field Microfluidic Chip

Électrotaxie l&#39;étude des cellules du cancer du poumon à l&#39;aide d&#39;un double-Multichannel champ électrique microfluidique Chip

The behavior of directional cell migration under a direct current electric-field (dcEF) is referred to as electrotaxis. The significant role of ...

Construction of Modular Hydrogel Sheets for Micropatterned Macro-scaled 3D Cellular Architecture

Construction de feuilles d&#39;hydrogel modulaire pour micropatterned macro-échelle 3D Cellular architecture

Hydrogels can be patterned at the micro-scale using microfluidic or micropatterning technologies to provide an in vivo-like three-dimensional (3D) tissue ...

Improved 3D Hydrogel Cultures of Primary Glial Cells for In Vitro Modelling of Neuroinflammation

Improved 3D Hydrogel Cultures of Primary Glial Cells for In Vitro Modelling of Neuroinflammation

Amélioré l’Hydrogel 3D des Cultures de cellules gliales primaires pour In Vitro la modélisation du neuro-inflammation

In the central nervous system, numerous acute injuries and neurodegenerative disorders, as well as implanted devices or biomaterials engineered to enhance ...

Repressing Gene Transcription by Redirecting Cellular Machinery with Chemical Epigenetic Modifiers

Réprimer la Transcription du gène en redirigeant la machinerie cellulaire avec des modificateurs chimiques épigénétiques

Regulation of chromatin compaction is an important process that governs gene expression in higher eukaryotes. Although chromatin compaction and gene ...

A Microfluidic Platform for Stimulating Chondrocytes with Dynamic Compression

Une plate-forme microfluidique pour stimuler les chondrocytes avec compression dynamique

Mechanical stimuli are known to modulate biological functions of cells and tissues. Recent studies have suggested that compressive stress alters growth ...

Pancreatic Tissue-Derived Extracellular Matrix Bioink for Printing 3D Cell-Laden Pancreatic Tissue Constructs

Bioink extracellulaire de matrice de tissu pancréatique-dérivé pour l'impression 3D Cell-Laden Pancréatique Tissue Constructs

The transplantation of pancreatic islets is a promising treatment for patients who suffer from type 1 diabetes accompanied by hypoglycemia and secondary ...

High Throughput Yeast Strain Phenotyping with Droplet-Based RNA Sequencing

Phénottypage à haute teneur en levures avec séquençage à base d’ARN à base de gouttelette

The powerful tools available to edit yeast genomes have made this microbe a valuable platform for engineering. While it is now possible to construct ...