Name: a facile and eco-friendly route to fabricate poly(lactic acid) scaffolds with graded pore size
Uploaded: 2016-10-17T13:00:00
Description: Watch this Scientific Journal Video about A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size at JoVE.com

This work was financially supported by INSTM.

Fabrication 1. Andaime <ol><li> Moer NaCl em um misturador de laboratório durante 20 minutos e secá-lo numa estufa a 100 ° C. </li><li> Coloque a NaCl secou-se (45 g de cada vez) em uma máquina de crivagem durante 30 minutos a mais alta frequência disponível sem que ocorre em ressonância. Recolha fracções de sal seis, que vão desde 500 um a 1000 um (M 500); a partir de 300 um a 500 um (M 300); a partir de 100 um a 200 um (M 100); a partir de 90 um a 100 (M 90); a partir de 45 ^ m a 65 | iM (H 45) e, finalmen...

<ol>
	<li>Scaffaro, R., Morreale, M., Lo Re, G., Mantia, F. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=La+Degradation+of+Mater-Bi&#174;/wood+flour+biocomposites+in+active+sewage+sludge.">La Degradation of Mater-Bi&#174;/wood flour biocomposites in active sewage sludge.</a> Polymer Degradation and Stability. 94 (8), 1220-1229 (2009).</li><li>Scaffaro, R., Botta, L., Passaglia, E., Oberhauser, W., Frediani, M., Di Landro, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparison+of+different+processing+methods+to+prepare+poly(lactid+acid)-hydrotalcite+composites.">Comparison of different processing methods to prepare poly(lactid acid)-hydrotalcite composites.</a> Polymer Engineering &amp; Science. 54 (8), 1804-1810 (2014).</li><li>Thakur, V. K., Thakur, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+graft+copolymerization+and+applications+of+chitosan:+A+review.">Recent advances in graft copolymerization and applications of chitosan: A review.</a> ACS Sustainable Chemistry and Engineering. 2 (12), 2637-2652 (2014).</li><li>Thakur, V. K., Thakur, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+green+hydrogels+from+lignin:+A+review.">Recent advances in green hydrogels from lignin: A review.</a> International Journal of Biological Macromolecules. 72, 834-847 (2015).</li><li>Thakur, V. K., Kessler, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-healing+polymer+nanocomposite+materials:+A+review.">Self-healing polymer nanocomposite materials: A review.</a> Polymer. 69, 369-383 (2015).</li><li>Thakur, V. K., Thakur, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+trends+in+hydrogels+based+on+psyllium+polysaccharide:+a+review.">Recent trends in hydrogels based on psyllium polysaccharide: a review.</a> Journal of Cleaner Production. 82, 1-15 (2014).</li><li>Voicu, S. I., Condruz, R. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Sericin+Covalent+Immobilization+onto+Cellulose+Acetate+Membrane+for+Biomedical+Applications.">Sericin Covalent Immobilization onto Cellulose Acetate Membrane for Biomedical Applications.</a> ACS Sustainable Chemistry &amp; Engineering. 4 (3), 1765-1774 (2016).</li><li>Scaffaro, R., Botta, L., Sanfilippo, M., Gallo, G., Palazzolo, G., Puglia, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combining+in+the+melt+physical+and+biological+properties+of+poly(caprolactone)+and+chlorhexidine+to+obtain+antimicrobial+surgical+monofilaments.">Combining in the melt physical and biological properties of poly(caprolactone) and chlorhexidine to obtain antimicrobial surgical monofilaments.</a> Applied Microbiology and Biotechnology. 97 (1), 99-109 (2013).</li><li>Scaffaro, R., Maio, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+self-assembly+of+a+PEGylated-graphene+aerogel.">Synthesis and self-assembly of a PEGylated-graphene aerogel.</a> Composites Science and Technology. 128, 193-200 (2016).</li><li>Scaffaro, R., Botta, L., Gallo, G., Puglia, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+Drawing+on+the+Antimicrobial+and+Physical+Properties+of+Chlorhexidine-Compounded+Poly(caprolactone)+Monofilaments.">Influence of Drawing on the Antimicrobial and Physical Properties of Chlorhexidine-Compounded Poly(caprolactone) Monofilaments.</a> Macromolecular Materials and Engineering. 12 (300), 1268-1277 (2015).</li><li>Scaffaro, R., Lopresti, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+PCL/PEG-Based+Membranes+on+Actinorhodin+Production+in+Streptomyces+coelicolor+Cultivations.">Effect of PCL/PEG-Based Membranes on Actinorhodin Production in Streptomyces coelicolor Cultivations.</a> Macromolecular bioscience. 16 (5), 686-693 (2016).</li><li>Scaffaro, R., Lopresti, F., Botta, L., Rigogliuso, S., Ghersi, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Melt+Processed+PCL/PEG+Scaffold+With+Discrete+Pore+Size+Gradient+for+Selective+Cellular+Infiltration.">Melt Processed PCL/PEG Scaffold With Discrete Pore Size Gradient for Selective Cellular Infiltration.</a> Macromolecular Materials and Engineering. 301 (2), 182-190 (2016).</li><li>Yousefi, A. -. M., Hoque, M. E., Prasad, R. G. S. V., Uth, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Current+strategies+in+multiphasic+scaffold+design+for+osteochondral+tissue+engineering:+A+review.">Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review.</a> Journal of Biomedical Materials Research Part A. 103 (7), 2460-2481 (2015).</li><li>Gillette, B. M., Rossen, N. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+extracellular+matrix+structure+in+3D+multiphase+tissues.">Engineering extracellular matrix structure in 3D multiphase tissues.</a> Biomaterials. 32 (32), 8067-8076 (2011).</li><li>Seidi, A., Ramalingam, M., Elloumi-Hannachi, I., Ostrovidov, S., Khademhosseini, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gradient+biomaterials+for+soft-to-hard+interface+tissue+engineering.">Gradient biomaterials for soft-to-hard interface tissue engineering.</a> Acta Biomaterialia. 7 (4), 1441-1451 (2011).</li><li>Son, J. S., Kim, S. G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydroxyapatite/polylactide+biphasic+combination+scaffold+loaded+with+dexamethasone+for+bone+regeneration.">Hydroxyapatite/polylactide biphasic combination scaffold loaded with dexamethasone for bone regeneration.</a> Journal of Biomedical Materials Research - Part A. 99 (4), 638-647 (2011).</li><li>Sundararaghavan, H. G., Burdick, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gradients+with+depth+in+electrospun+fibrous+scaffolds+for+directed+cell+behavior.">Gradients with depth in electrospun fibrous scaffolds for directed cell behavior.</a> Biomacromolecules. 12 (6), 2344-2350 (2011).</li><li>Zou, B., Liu, Y., Luo, X., Chen, F., Guo, X., Li, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrospun+fibrous+scaffolds+with+continuous+gradations+in+mineral+contents+and+biological+cues+for+manipulating+cellular+behaviors.">Electrospun fibrous scaffolds with continuous gradations in mineral contents and biological cues for manipulating cellular behaviors.</a> Acta biomaterialia. 8 (4), 1576-1585 (2012).</li><li>Nedjari, S., Schlatter, G., H&#233;braud, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thick+electrospun+honeycomb+scaffolds+with+controlled+pore+size.">Thick electrospun honeycomb scaffolds with controlled pore size.</a> Materials Letters. 142, 180-183 (2015).</li><li>Yusong, P., Qianqian, S., Chengling, P., Jing, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prediction+of+mechanical+properties+of+multilayer+gradient+hydroxyapatite+reinforced+poly(vinyl+alcohol)+gel+biomaterial.">Prediction of mechanical properties of multilayer gradient hydroxyapatite reinforced poly(vinyl alcohol) gel biomaterial.</a> Journal of Biomedical Materials Research - Part B Applied Biomaterials. 101 (5), 729-735 (2013).</li><li>Kim, Y. B., Kim, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functionally+graded+PCL/&#946;-TCP+biocomposites+in+a+multilayered+structure+for+bone+tissue+regeneration.">Functionally graded PCL/&#946;-TCP biocomposites in a multilayered structure for bone tissue regeneration.</a> Applied Physics A: Materials Science and Processing. 108 (4), 949-959 (2012).</li><li>Sudarmadji, N., Tan, J. Y., Leong, K. F., Chua, C. K., Loh, Y. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Investigation+of+the+mechanical+properties+and+porosity+relationships+in+selective+laser-sintered+polyhedral+for+functionally+graded+scaffolds.">Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds.</a> Acta biomaterialia. 7 (2), 530-537 (2011).</li><li>Molladavoodi, S., Gorbet, M., Medley, J., Kwon, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Investigation+of+microstructure,+mechanical+properties+and+cellular+viability+of+poly(L-lactic+acid)+tissue+engineering+scaffolds+prepared+by+different+thermally+induced+phase+separation+protocols.">Investigation of microstructure, mechanical properties and cellular viability of poly(L-lactic acid) tissue engineering scaffolds prepared by different thermally induced phase separation protocols.</a> Journal of the mechanical behavior of biomedical materials. 17, 186-197 (2013).</li><li>Oh, S. H., Kim, T. H., Il Im, G., Lee, J. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Investigation+of+pore+size+effect+on+chondrogenic+differentiation+of+adipose+stem+cells+using+a+pore+size+gradient+scaffold.">Investigation of pore size effect on chondrogenic differentiation of adipose stem cells using a pore size gradient scaffold.</a> Biomacromolecules. 11 (8), 1948-1955 (2010).</li><li>Lin, L., Gao, H., Dong, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bone+regeneration+using+a+freeze-dried+3D+gradient-structured+scaffold+incorporating+OIC-A006-loaded+PLGA+microspheres+based+on+&#946;-TCP/PLGA.">Bone regeneration using a freeze-dried 3D gradient-structured scaffold incorporating OIC-A006-loaded PLGA microspheres based on &#946;-TCP/PLGA.</a> Journal of Materials Science: Materials in Medicine. 26 (1), 3 (2015).</li><li>Yoo, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heterogeneous+minimal+surface+porous+scaffold+design+using+the+distance+field+and+radial+basis+functions.">Heterogeneous minimal surface porous scaffold design using the distance field and radial basis functions.</a> Medical engineering &amp; physics. 34 (5), 625-639 (2012).</li><li>Soon, Y. -. M., Shin, K. -. H., Koh, Y. -. H., Lee, J. -. H., Choi, W. -. Y., Kim, H. -. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+and+compressive+strength+of+porous+hydroxyapatite+scaffolds+with+a+functionally+graded+core/shell+structure.">Fabrication and compressive strength of porous hydroxyapatite scaffolds with a functionally graded core/shell structure.</a> Journal of the European Ceramic Society. 31 (1-2), 13-18 (2011).</li><li>Scaffaro, R., Lopresti, F., Botta, L., Maio, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+behavior+of+Polylactic+acid/Polycaprolactone+porous+layered+functional+composites.">Mechanical behavior of Polylactic acid/Polycaprolactone porous layered functional composites.</a> Composites Part B: Engineering. 98, 70-77 (2016).</li><li>Halili, A. N., Hasirci, N., Hasirci, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+multilayer+tissue+engineered+meniscus+substitute.">A multilayer tissue engineered meniscus substitute.</a> Journal of Materials Science: Materials in Medicine. 25 (4), 1195-1209 (2014).</li><li>Bai, H., Wang, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomimetic+gradient+scaffold+from+ice-templating+for+self-seeding+of+cells+with+capillary+effect.">Biomimetic gradient scaffold from ice-templating for self-seeding of cells with capillary effect.</a> Acta Biomaterialia. 20, 113-119 (2015).</li><li>Algul, D., Sipahi, H., Aydin, A., Kelleci, F., Ozdatli, S., Yener, F. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biocompatibility+of+biomimetic+multilayered+alginate-chitosan/&#946;-TCP+scaffold+for+osteochondral+tissue.">Biocompatibility of biomimetic multilayered alginate-chitosan/&#946;-TCP scaffold for osteochondral tissue.</a> International Journal of Biological Macromolecules. 79, 363-369 (2015).</li><li>Scaffaro, R., Lopresti, F., Botta, L., Rigogliuso, S., Ghersi, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+three-layered+porous+PLA/PEG+scaffold+relationship+between+morphology+,+mechanical+behavior+and+cell+permeability.">Preparation of three-layered porous PLA/PEG scaffold relationship between morphology , mechanical behavior and cell permeability.</a> Journal of the Mechanical Behavior of Biomedical Materials. 54, 8-20 (2016).</li><li>Lo Re, G., Lopresti, F., Petrucci, G., Scaffaro, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+facile+method+to+determine+pore+size+distribution+in+porous+scaffold+by+using+image+processing.">A facile method to determine pore size distribution in porous scaffold by using image processing.</a> Micron. 76, 37-45 (2015).</li><li>Levingstone, T. J., Matsiko, A., Dickson, G. R., O'Brien, F. J., Gleeson, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+biomimetic+multi-layered+collagen-based+scaffold+for+osteochondral+repair.">A biomimetic multi-layered collagen-based scaffold for osteochondral repair.</a> Acta Biomaterialia. 10 (5), 1996-2004 (2014).</li><li>Scaffaro, R., Botta, L., Maio, A., Mistretta, M. C., La Mantia, F. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+Graphene+Nanoplatelets+on+the+Physical+and+Antimicrobial+Properties+of+Biopolymer-Based+Nanocomposites.">Effect of Graphene Nanoplatelets on the Physical and Antimicrobial Properties of Biopolymer-Based Nanocomposites.</a> Materials. 9 (5), 351 (2016).</li><li>Maio, A., Fucarino, R., Khatibi, R., Rosselli, S., Bruno, M., Scaffaro, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+approach+to+prevent+graphene+oxide+re-aggregation+during+the+melt+compounding+with+polymers.">A novel approach to prevent graphene oxide re-aggregation during the melt compounding with polymers.</a> Composites Science and Technology. 119, 131-137 (2015).</li><li>Maio, A., Agnello, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+rapid+and+eco-friendly+route+to+synthesize+graphene-doped+silica+nanohybrids.">A rapid and eco-friendly route to synthesize graphene-doped silica nanohybrids.</a> Journal of Alloys and Compounds. 664, 428-438 (2015).</li><li>Maio, A., Giallombardo, D., Scaffaro, R., Piccionello, A. P., Pibiri, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+a+fluorinated+graphene+oxide-silica+nanohybrid:+improving+oxygen+affinity.">Synthesis of a fluorinated graphene oxide-silica nanohybrid: improving oxygen affinity.</a> RSC Advances. 6 (52), 46037-46047 (2016).</li></ol>

O primeiro passo crítico é a otimização de peneiramento eficiência. O elevado controlo do tamanho de partícula de NaCl é fundamental para a preparação de andaime com distribuição de tamanho de poro desejado. Um outro passo crucial é evitar a fractura das monocamadas PLA finas durante a extracção da amostra a partir do molde. A análise de processamento de imagem pode não ser representativa de todo o dispositivo. Durante ensaios de tracção, a amostra pode rasgar para longe do...

The interest in biodegradable polymers has grown in importance during the last years both in academia and in the industry, due to the rising concerns regarding plastic waste and the reduction in using non-renewable sources1-7. In particular, biocompatible and biodegradable synthetic polymers are widespread in several biomedical application fields, such as drug controlled release8,9, absorbable suture threads8,10, bioprocess intensification11 and tissue engineering12.
Tissue engineering focuses on the development of devices capable to restore and maintain normal function in diseased or injured tissues. Most of the native tissues are composed by different types of cells and extracellular matrices (ECMs) in specific spatial hierarchies. For example, articular cartilage (AC) consists of different zones with varying types and orientations of collagen fibers and collagen-binding proteins. Moreover, cartilage and bone show significantly different hierarchical structures. In this context, the preparation of multilayer scaffolds with engineered properties in each layer could allow replacing heterogeneous tissues by taking into accounts all the local microenvironments of these complex systems13,14.
Based on the cellular/biological and/or physical-chemical characteristics of the scaffolds, the main strategies adopted by the tissue engineering can be divided into monophasic, biphasic, and triphasic. Biphasic and triphasic approaches (BTA) use two or three different pores architectures, materials, or fillers to prepare multilayered functional devices. Furthermore, a single material can be used to achieve biphasic or triphasic devices, as long as it is possible to create a gradient in its physical properties12.
Cell migration plays a key-role in the morphogenesis, inflammation, wound healing and tumor metastasis. Cell movement is encouraged by the presence of a gradient of chemical-physical properties from the surface to the core of the device. Therefore, biomaterials fulfilling the above discussed requirements can be helpful in studying cell migration. In addition to chemical gradients that trigger cells migration (chemotaxis), mechanical properties of cells culture substrate can also lead to cell movement (mechanotaxis)15.
The multilayer structure can also provide the tunable release of specific drugs incorporated within the polymer matrix, by changing the specific area of the layer or the amount of loaded drugs. 
Over the past decade, in order to develop scaffolds possessing a discrete or continuous gradient of morphological properties, such as porosity or pore size, several approaches have been presented16-31. The most recent papers focused on the preparation of BTA by adopting: particle leaching 12,28,32, gas foaming technique16, electrospinning17-19, layer by layer casting technique20, rapid prototyping21,22, thermally induced phase separation (TIPS)22, centrifugation freeze drying24,25, triply periodic minimal surfaces (TPMS)26, freeze casting27-30.
Within the frame of this work, we present a fast and simple route to achieve PLA-based three-layer porous scaffolds (TLS), by combining melt mixing, compression molding and salt leaching. Differently from most of the technologies commonly used for scaffold production, the strategy herein adopted can be considered fully eco-friendly, since it does not require any toxic solvent potentially dangerous for environment and for living cells and tissues32. The basic processing-structure-property relationships established in this study by analyzing both morphological features and mechanical behavior of fabricated devices provide guidance to future advances in designing multifunctional graded scaffolds with specific target properties.

<table border="0" cellpadding="0" cellspacing="0" width="828">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Poly(lactic acid)</td>
			<td style="width:149px;">NatureWorks</td>
			<td style="width:207px;">PLA 2002D</td>
			<td style="width:257px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Poly(ethylene glycol)</td>
			<td style="width:149px;">Sigma</td>
			<td style="width:207px;">83797-1KG-F</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sodium Cloride</td>
			<td style="width:149px;">Sigma</td>
			<td style="width:207px;">793566-5KG-D</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Phosfate Buffer Solution</td>
			<td style="width:149px;">Sigma</td>
			<td style="width:207px;">P5368-10PAK</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Laboratory Mixer</td>
			<td style="width:149px;">Brabender</td>
			<td style="width:207px;">PLE 330 - Plasticorder</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Laboratory Press</td>
			<td style="width:149px;">Carver</td>
			<td style="width:207px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Scanning Electron Microscopy</td>
			<td style="width:149px;">Phenom-world</td>
			<td style="width:207px;">ProX</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Universal Testing Machine</td>
			<td style="width:149px;">Instron</td>
			<td style="width:207px;">3365 (UK)</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">BioPuls Bath</td>
			<td style="width:149px;">Instron, Norwood</td>
			<td style="width:207px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sieving Machine</td>
			<td style="width:149px;">Endecotts</td>
			<td style="width:207px;">E.V.F.1.</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Vacuum Oven</td>
			<td style="width:149px;">ISCO</td>
			<td style="width:207px;">NSV9035</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Precision Balance</td>
			<td style="width:149px;">Sartorius</td>
			<td style="width:207px;">AX224</td>
			<td></td>
		</tr>
	</tbody>
</table>

a facile and eco-friendly route to fabricate poly(lactic acid) scaffolds with graded pore size

Over the recent years, functionally graded scaffolds (FGS) gaineda crucial role for manufacturing of devices for tissue engineering. The importance of this new field of biomaterials research is due to the necessity to develop implants capable of mimicking the complex functionality of the various tissues, including a continuous change from one structure or composition to another. In this latter context, one topic of main interest concerns the design of appropriate scaffolds for bone-cartilage interface tissue. In this study, three-layered scaffolds with graded pore size were achieved by melt mixing poly(lactic acid) (PLA), sodium chloride (NaCl) and polyethylene glycol (PEG). Pore size distributions were controlled by NaCl granulometry and PEG solvation. Scaffolds were characterized from a morphological and mechanical point of view. A correlation between the preparation method, the pore architecture and compressive mechanical behavior was found. The interface adhesion strength was quantitatively evaluated by using a custom-designed interfacial strength test. Furthermore, in order to imitate the human physiology, mechanical tests were also performed in phosphate buffered saline (PBS) solution at 37 &#176;C. The method herein presented provides a high control of porosity, pore size distribution and mechanical performance, thus offering the possibility to fabricate three-layered scaffolds with tailored properties by following a simple and eco-friendly route.

A influência de NaCl tamanho de partícula sobre a arquitectura dos poros dos andaimes foi avaliada qualitativamente e quantitativamente por investigar a morfologia das amostras e calcular a distribuição do tamanho dos poros por análise de imagem, respectivamente, Figura 2a -. F mostra micrografias de andaimes mono-camadas resultantes de sal-lixiviação de materiais com diferentes tamanhos de partículas de NaCl. <p class="jove_content" fo:keep-...

Watch this Scientific Journal Video about A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size at JoVE.com

A Facile and Eco-friendly Route to Fabricate PolyLactic Acid Scaffolds with Graded Pore Size

In this work, poly(lactic acid)/polyethylene glycol (PLA/PEG) scaffolds were prepared by using a combination of melt mixing and selective leaching. The method herein discussed permitted to develop three-layer scaffolds by highly controlling both porosity and pore size. The mechanical properties were also evaluated in a physiological environment.

A Facile e Eco-friendly rota para fabricar poli (ácido láctico) Scaffolds com Graded Pore Tamanho

Over the recent years, functionally graded scaffolds (FGS) gaineda crucial role for manufacturing of devices for tissue engineering. The importance of ...

Research

JoVE Journal

Bioengineering

A Facile and Eco-friendly Route to Fabricate Poly(Lactic Acid) Scaffolds with Graded Pore Size

Micropatterned Surfaces to Study Hyaluronic Acid Interactions with Cancer Cells

Superfícies micropatterned para estudar as interações ácido hialurônico com células de câncer

Cancer invasion and progression involves a motile cell phenotype, which is under complex regulation by growth factors/cytokines and extracellular matrix ...

Bioengenharia

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

Projeto de um biorreator de pressão cíclica para o Ex Vivo Estudo de válvulas cardíacas Aórtica

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic ...

Directed Cellular Self-Assembly to Fabricate Cell-Derived Tissue Rings for Biomechanical Analysis and Tissue Engineering

Dirigido Cellular Automontagem para Fabricar Anéis Cell-Derived Tecido para Análise Biomecânica e Engenharia de Tecidos

Each year, hundreds of thousands of patients undergo coronary artery bypass surgery in the United States.1 Approximately one third of these patients do ...

Multi-Scale Modification of Metallic Implants With Pore Gradients, Polyelectrolytes and Their Indirect Monitoring In vivo

Multi-Scale Modification of Metallic Implants With Pore Gradients, Polyelectrolytes and Their Indirect Monitoring In vivo

Modificação Multi-Escala de implantes metálicos com gradientes de poros, polieletrólitos e sua monitorização indirecta<em&gt; In vivo</em

Metallic implants, especially titanium implants, are widely used in  clinical applications. Tissue in-growth and integration to these implants in  the ...

Microfluidic Fabrication of Polymeric and Biohybrid Fibers with Predesigned Size and Shape

Fabricação microfluida de fibras poliméricas e biohibridas com tamanho e forma predesigned

A &#8220;sheath&#8221; fluid passing through a microfluidic channel at low Reynolds number can be directed around another &#8220;core&#8221; stream and ...

Electrospun Nanofiber Scaffolds with Gradations in Fiber Organization

Electrospun nanofibras Andaimes com gradações de Organização Fiber

The goal of this protocol is to report a simple method for generating nanofiber scaffolds with gradations in fiber organization and test their possible ...

A Microfluidic Platform for Precision Small-volume Sample Processing and Its Use to Size Separate Biological Particles with an Acoustic Microdevice

Uma plataforma microfluídica para processamento de precisão de pequeno volume de amostra e respectiva utilização para Tamanho partículas biológicas separadas com um microdispositivos Acústico

A major advantage of microfluidic devices is the ability to manipulate small sample volumes, thus reducing reagent waste and preserving precious sample. ...

Sustained Administration of &#946;-cell Mitogens to Intact Mouse Islets Ex Vivo Using Biodegradable Poly(lactic-co-glycolic acid) Microspheres

Sustained Administration of ÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Â²-cell Mitogens to Intact Mouse Islets Ex Vivo Using Biodegradable Polylactic-co-glycolic acid Microspheres

Administração sustentada dos mitógenos de células β para intactas mouse Ilhotas<em&gt; Ex Vivo</em&gt; Usando biodegradável poli (ácido láctico-co-glicólico) Microesferas

The development of biomaterials has significantly increased the potential for targeted drug delivery to a variety of cell and tissue types, including the ...

An Additive Manufacturing Technique for the Facile and Rapid Fabrication of Hydrogel-based Micromachines with Magnetically Responsive Components

Um aditivo fabricação técnica para a preparação fácil e rápida de Micromachines baseada em hidrogel com componentes magneticamente responsivos

Polyethylene glycol (PEG)-based hydrogels are biocompatible hydrogels that have been approved for use in humans by the FDA. Typical PEG-based hydrogels ...

Human Pluripotent Stem Cell Culture on Polyvinyl Alcohol-Co-Itaconic Acid Hydrogels with Varying Stiffness Under Xeno-Free Conditions

Cultura de células-tronco pluripotentes humanas em polivinil álcool-Co-itacónico ácido hidrogel com rigidez diferentes condições Xeno-livre

The effect of physical cues, such as the stiffness of biomaterials on the proliferation and differentiation of stem cells, has been investigated by ...