Name: insect-controlled robot: a mobile robot platform to evaluate the odor-tracking capability of an insect
Uploaded: 2016-12-19T15:00:00
Description: Watch this Scientific Journal Video about Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect at JoVE.com

We thank Shigeru Matsuyama for providing purified bombykol. This work was supported by the Japan Society for the Promotion of Science KAKENHI (grant numbers 22700197 and 24650090) and the Human Frontier Science Program (HFSP).

1. 실험 동물 <ol><li> 자신의 우화까지 남성 silkmoths의 번데기 (B. 모리)를 유지하는 플라스틱 상자를 준비합니다. 넣어 종이 하단에 수건 상자 (그림 1A)의 내벽 주위에 종이 조각. 참고 : 우화 (그림 1A) 동안 날개를 확장하면서 성인 나방가 개최하는 종이의 조각이 필요합니다. </li><li> 넣어 남성 silkmoth (봄 빅스 MOR ⅰ) 상자에 번데기 및 16 시간...

silkmoth 의해 로봇의 성공적인 제어하는 ​​가장 중요한 포인트는 방 공기지지 공 매끄럽게 걸어시키는하고 안정적 ​​공의 회전을 측정. 따라서, silkmoth을 테 더링하고 적절한 위치에서 공을 설치하면이 프로토콜의 중요한 단계입니다. 첨부 파일 또는 공 나방의 부적절한 위치에 나방의 부적절한 유착은 정상 보행 동작을 교란 및 / 또는 볼의 회전을 측정하는 광 센서의 고장 원인이 거기에 자?...

Autonomous robots capable of finding an odor source can be important for the safety and security of society. They can be used for the detection of disaster victims, of drugs or explosive materials at an airport, and of hazardous material spills or leaks in the environment. At present, we rely entirely on well-trained animals (e.g., dogs) for these tasks, and robotic odor source localization has been strongly expected to relieve the workload of these animals. Finding an odor source is a challenging task for robots because odorants are distributed intermittently in an atmosphere1; therefore, continuous sampling of the odor concentration gradient is not always possible. Thus, a search strategy using intermittent odor cues is necessary for the achievement of robotic odor source localization2-4.
Odor source localization is essential for organism survival and includes tasks such as finding food, mating partners, and sites for oviposition. To overcome the difficulty in tracking patchy distributed odorants, organisms have evolved various behavioral strategies consisting of two fundamental behaviors: moving upstream during odor reception and cross-stream during cessation of odor reception5,6. These reactive strategies have been well-documented in insects and further combined with other modalities, such as wind direction and vision5-8. The insect behavioral models have also been useful examples for robotics3,9-11, in which behavioral algorithms or neural circuit models are implemented into mobile robots for the evaluation of odor source localization abilities10,12-15. From biomimetic perspectives, this "bottom-up" approach is certainly a fundamental way to develop biomimetic robots. However, the bottom-up approach is not a shortcut to obtaining a useful search strategy, because biological analyses are still ongoing, and the modeling of the sensory-motor systems behind insect behaviors has not been completed. Therefore, it is still unknown how such a biological system actually works as a controller of a robotic platform.
In this article, we demonstrate the protocol of a straightforward "top-down" approach to develop an odor-tracking mobile robot controlled by a biological system16,17. The robot is controlled by a real insect and can be regarded as a prototype of future insect-mimetic robots. In the robot's cockpit, a tethered adult male silkmoth (Bombyx mori) walked on an air-supported ball in response to the female sex pheromone, which was delivered to each antenna through air suction tubes. The ball rotations caused by the walking of the onboard moth were measured by an optical sensor and were translated into the movement of the two-wheeled robot. The advantage of this "hybrid" approach is that experimenters can investigate how the insect sensory-motor system works on the robotic platform where a pilot insect is in a closed loop between the robot and a real odor circumstance. The manipulation of the robotic hardware alters the closed loop; therefore, the insect-controlled robot is a useful platform for both engineers and biologists. For engineering, the robot represents the first steps of applying a biological model to meet the requirements for robotic tasks. For biology, the robot is an experimental platform for studying sensory-motor control under a closed loop.

<table border="0" cellpadding="0" cellspacing="0" width="961">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="43">
			<td height="43" style="height:43px;width:267px;">Male adult silkmoth 
			&#160;(Bombyx mori)</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Rear from eggs, or purchase as pupae.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Incubator</td>
			<td style="width:159px;">Panasonic</td>
			<td style="width:171px;">MIR-254</td>
			<td style="width:365px;">Store pupae or adult silkmoths at a constant temperature, 238 L.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Plastic box</td>
			<td style="width:159px;">Sunplatec</td>
			<td style="width:171px;">O-3</td>
			<td style="width:365px;">Store pupae or adult silkmoths, 299 &#215; 224 &#215; 62 mm L &#215; W &#215; H.</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:267px;">Copper wire</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">2-mm diameter for the attachment. Any rigid bar can be used as an alternative for making the attachment to tether a silkmoth.&#160;</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Plastic sheet</td>
			<td style="width:159px;">Kokuyo</td>
			<td style="width:171px;">VF-1420N</td>
			<td style="width:365px;">Sold as overhead projector film with thickness of 0.1 mm. Use at the tip of the attachment.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Forceps</td>
			<td style="width:159px;">As one</td>
			<td style="width:171px;">5SA</td>
			<td style="width:365px;">Remove scales on the thorax.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Adhesive</td>
			<td style="width:159px;">Konishi</td>
			<td style="width:171px;">G17</td>
			<td style="width:365px;">Bond a silkmoth to the attachment.</td>
		</tr>
		<tr height="93">
			<td height="93" style="height:93px;width:267px;">Insect-controlled robot</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Bearing an air-supported treadmill, an optical sensor, custom-built AVR-based microcontroller boards, and two DC brushless motors. It is powered by 8 &#215; AA and 3 &#215; 006P batteries.</td>
		</tr>
		<tr height="28">
			<td height="28" style="height:28px;width:267px;">Microcontroller</td>
			<td style="width:159px;">Atmel</td>
			<td style="width:171px;">ATMEGA8</td>
			<td style="width:365px;">A component of the insect-controlled robot.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">DC blower</td>
			<td style="width:159px;">Nidec</td>
			<td style="width:171px;">A34342-55</td>
			<td style="width:365px;">A component of the insect-controlled robot for floating a ball in an air-supported treadmill.&#160;</td>
		</tr>
		<tr height="40">
			<td height="40" style="height:40px;width:267px;">DC fan</td>
			<td style="width:159px;">Minebea</td>
			<td style="width:171px;">1606KL-04W-B50</td>
			<td style="width:365px;">A component of the insect-controlled robot for suctioning air containing an odor.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:267px;">Optical mouse sensor</td>
			<td style="width:159px;">Agilent technologies</td>
			<td style="width:171px;">HDNS-2000</td>
			<td style="width:365px;">A component of the insect-controlled robot, obtained from an optical mouse (M-GUWSRSV, Elecom, Japan).</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Brushless motor</td>
			<td style="width:159px;">Maxon</td>
			<td style="width:171px;">EC-45</td>
			<td style="width:365px;">A component of the insect-controlled robot for driving a wheel.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">White polystyrene ball</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">A component of the insect-controlled robot. Diameter 50 mm, mass approximately 2 g.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Bombykol: 
			&#160;(E,Z)-10,12-hexadecadien-1-ol</td>
			<td style="width:159px;">Shin-Etsu chemical</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Custom synthesis.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">n-hexane</td>
			<td style="width:159px;">Wako</td>
			<td style="width:171px;">085-00416</td>
			<td style="width:365px;">Solvent for bombykol.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Wind tunnel</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Pulling-air type, sized 1800 &#215; 900 &#215; 300 mm L &#215; W &#215; H.</td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:267px;">BioSignal program</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">A program to establish serial communication between the insect-controlled robot and a PC via Bluetooth. Used for sending commands to start/stop the robot or configuring its motor properties.&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Camcorder</td>
			<td style="width:159px;">Sony</td>
			<td style="width:171px;">HDR-XR520V</td>
			<td style="width:365px;">Capture robot movements.</td>
		</tr>
	</tbody>
</table>

insect-controlled robot: a mobile robot platform to evaluate the odor-tracking capability of an insect

Robotic odor source localization has been a challenging area and one to which biological knowledge has been expected to contribute, as finding odor sources is an essential task for organism survival. Insects are well-studied organisms with regard to odor tracking, and their behavioral strategies have been applied to mobile robots for evaluation. This "bottom-up" approach is a fundamental way to develop biomimetic robots; however, the biological analyses and the modeling of behavioral mechanisms are still ongoing. Therefore, it is still unknown how such a biological system actually works as the controller of a robotic platform. To answer this question, we have developed an insect-controlled robot in which a male adult silkmoth (Bombyx mori) drives a robot car in response to odor stimuli; this can be regarded as a prototype of a future insect-mimetic robot. In the cockpit of the robot, a tethered silkmoth walked on an air-supported ball and an optical sensor measured the ball rotations. These rotations were translated into the movement of the two-wheeled robot. The advantage of this "hybrid" approach is that experimenters can manipulate any parameter of the robot, which enables the evaluation of the odor-tracking capability of insects and provides useful suggestions for robotic odor-tracking. Furthermore, these manipulations are non-invasive ways to alter the sensory-motor relationship of a pilot insect and will be a useful technique for understanding adaptive behaviors.

우리는 여기서 악취 소스의 성공적인 위치 파악에 필요한 제어 곤충 로봇의 기본 특성을 제시한다. 로봇과 silkmoths, 악취 전달 시스템의 효율성 및 정확성 양자 후각 시각적 입력의 의미의 비교 검사한다. 자유롭게 산책 나방과 곤충 제어 로봇 사이의 냄새 추적 행동의 비교는 그림 10A와 B에 표시됩니?...

Watch this Scientific Journal Video about Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect at JoVE.com

Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect

냄새 소스 지역화하는 능력 벌레의 생존에 필요한 인공 냄새 추적에 적용될 것으로 기대된다. 곤충 제어 로봇은 실제 silkmoth에 의해 구동 로봇 플랫폼을 통해 곤충의 냄새 추적 능력을 평가하기 위해 우리가 할 수있다.

곤충 제어 로봇 : 이동 로봇 플랫폼은 곤충의 냄새 추적 능력을 평가하는

Robotic odor source localization has been a challenging area and one to which biological knowledge has been expected to contribute, as finding odor ...

Research

JoVE Journal

Neuroscience

An Experimental Platform to Study the Closed-loop Performance of Brain-machine Interfaces

뇌 - 기계 인터페이스의 폐쇄 루프 성능을 연구하기 위해 실험 플랫폼

The non-stationary nature and variability of neuronal signals is a fundamental problem in brain-machine interfacing. We developed a brain-machine ...

연구

신경과학

Identification of Olfactory Volatiles using Gas Chromatography-Multi-unit Recordings (GCMR) in the Insect Antennal Lobe

Identification of Olfactory Volatiles using Gas Chromatography-Multi-unit Recordings GCMR in the Insect Antennal Lobe

곤충 Antennal 엽에 가스 크로마토 그래피 - 멀티 유닛 레코딩 (GCMR)를 사용하여 강한 휘발성 물질의 식별

All  organisms inhabit a world full of sensory stimuli that determine their  behavioral and physiological response to their environment. Olfaction is ...

Determination of Photoreceptor Cell Spectral Sensitivity in an Insect Model from In Vivo Intracellular Recordings

Determination of Photoreceptor Cell Spectral Sensitivity in an Insect Model from In Vivo Intracellular Recordings

에서 곤충 모델에서 시각 세포 스펙트럼 감도의 결정<em&gt; 생체</em&gt; 세포 내 녹음

Intracellular recording is a powerful technique used to determine how a single cell may respond to a given stimulus. In vision research, intracellular ...

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

의 기록 세포 내 전압 응답에 대한 전기 생리 방법<em&gt; 초파리</em&gt; 빛 자극에 광수와의 interneurons<em&gt; 생체</em

Voltage responses of insect photoreceptors and visual interneurons can be accurately recorded with conventional sharp microelectrodes. The method ...

Fabrication of High Contact-Density, Flat-Interface Nerve Electrodes for Recording and Stimulation Applications

녹화 및 자극 애플리케이션을위한 높은 접촉 밀도의 제작, 평면 인터페이스 신경 전극

Many attempts have been made to manufacture multi-contact nerve cuff electrodes that are safe, robust and reliable for long term neuroprosthetic ...

An Improved Method for Collection of Cerebrospinal Fluid from Anesthetized Mice

마 취 쥐에서 척수의 컬렉션에 대 한 개선된 방법

The cerebrospinal fluid (CSF) is a valuable body fluid for analysis in neuroscience research. It is one of the fluids in closest contact with the central ...

A Rat Model of Central Fatigue Using a Modified Multiple Platform Method

쥐 모델에 수정 사용 하 여 중앙 피로의 여러 플랫폼 메서드

In this article, we introduced a rat model of central fatigue using the modified multiple platform method (MMPM). The Multiple Platform box was designed ...

A Neurosphere Assay to Evaluate Endogenous Neural Stem Cell Activation in a Mouse Model of Minimal Spinal Cord Injury

최소한의 척수 상해의 마우스 모델에서 내 인 성 신경 줄기 세포 활성화 평가 Neurosphere 분석 결과

Neural stem cells (NSCs) in the adult mammalian spinal cord are a relatively mitotically quiescent population of periventricular cells that can be studied ...

A Volumetric Method for Quantification of Cerebral Vasospasm in a Murine Model of Subarachnoid Hemorrhage

거미 막 밑 출혈의 Murine 모델에 대뇌 Vasospasm의 정량화에 대 한 체적 메서드

Subarachnoid hemorrhage (SAH) is a subtype of hemorrhagic stroke. Cerebral vasospasm that occurs in the aftermath of the bleeding is an important factor ...

Functional MRI in Conjunction with a Novel MRI-compatible Hand-induced Robotic Device to Evaluate Rehabilitation of Individuals Recovering from Hand Grip Deficits

손 그립 적자에서 회복하는 개인의 재활을 평가하기 위해 새로운 MRI 호환 손 유도 로봇 장치와 함께 기능MRI

Functional magnetic resonance imaging (fMRI) is a non-invasive magnetic resonance imaging technique that images brain activation in vivo, using endogenous ...