Name: insect-controlled robot: a mobile robot platform to evaluate the odor-tracking capability of an insect
Uploaded: 2016-12-19T15:00:00
Description: Watch this Scientific Journal Video about Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect at JoVE.com

We thank Shigeru Matsuyama for providing purified bombykol. This work was supported by the Japan Society for the Promotion of Science KAKENHI (grant numbers 22700197 and 24650090) and the Human Frontier Science Program (HFSP).

1. Experimental Animal <ol><li> Prepare una caja de plástico para mantener las pupas de machos silkmoths (B. mori) hasta su eclosión. Toallas poner papel en la parte inferior y trozos de cartón alrededor de la pared interior de la caja (Figura 1A). Nota: Las piezas de cartón son necesarias para que las polillas adultas de espera mientras se extiende sus alas durante la eclosión (Figura 1A). </li><li> Silkmoth masculina puesto (Bombyx mor ...

Los puntos más importantes para el éxito en el control del robot por un Silkmoth están dejando que la polilla caminar sin problemas en el balón hinchable y la medición de la rotación de la bola de forma estable. Por lo tanto, la inmovilización del Silkmoth y montarlo en la pelota en la posición adecuada son los pasos críticos en este protocolo. adherencia inadecuada de la polilla de la unión o de posicionamiento inadecuado de la polilla en la bola hará que la presión no natural en él, lo que perturba su com...

Autonomous robots capable of finding an odor source can be important for the safety and security of society. They can be used for the detection of disaster victims, of drugs or explosive materials at an airport, and of hazardous material spills or leaks in the environment. At present, we rely entirely on well-trained animals (e.g., dogs) for these tasks, and robotic odor source localization has been strongly expected to relieve the workload of these animals. Finding an odor source is a challenging task for robots because odorants are distributed intermittently in an atmosphere1; therefore, continuous sampling of the odor concentration gradient is not always possible. Thus, a search strategy using intermittent odor cues is necessary for the achievement of robotic odor source localization2-4.
Odor source localization is essential for organism survival and includes tasks such as finding food, mating partners, and sites for oviposition. To overcome the difficulty in tracking patchy distributed odorants, organisms have evolved various behavioral strategies consisting of two fundamental behaviors: moving upstream during odor reception and cross-stream during cessation of odor reception5,6. These reactive strategies have been well-documented in insects and further combined with other modalities, such as wind direction and vision5-8. The insect behavioral models have also been useful examples for robotics3,9-11, in which behavioral algorithms or neural circuit models are implemented into mobile robots for the evaluation of odor source localization abilities10,12-15. From biomimetic perspectives, this "bottom-up" approach is certainly a fundamental way to develop biomimetic robots. However, the bottom-up approach is not a shortcut to obtaining a useful search strategy, because biological analyses are still ongoing, and the modeling of the sensory-motor systems behind insect behaviors has not been completed. Therefore, it is still unknown how such a biological system actually works as a controller of a robotic platform.
In this article, we demonstrate the protocol of a straightforward "top-down" approach to develop an odor-tracking mobile robot controlled by a biological system16,17. The robot is controlled by a real insect and can be regarded as a prototype of future insect-mimetic robots. In the robot's cockpit, a tethered adult male silkmoth (Bombyx mori) walked on an air-supported ball in response to the female sex pheromone, which was delivered to each antenna through air suction tubes. The ball rotations caused by the walking of the onboard moth were measured by an optical sensor and were translated into the movement of the two-wheeled robot. The advantage of this "hybrid" approach is that experimenters can investigate how the insect sensory-motor system works on the robotic platform where a pilot insect is in a closed loop between the robot and a real odor circumstance. The manipulation of the robotic hardware alters the closed loop; therefore, the insect-controlled robot is a useful platform for both engineers and biologists. For engineering, the robot represents the first steps of applying a biological model to meet the requirements for robotic tasks. For biology, the robot is an experimental platform for studying sensory-motor control under a closed loop.

<table border="0" cellpadding="0" cellspacing="0" width="961">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="43">
			<td height="43" style="height:43px;width:267px;">Male adult silkmoth 
			&#160;(Bombyx mori)</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Rear from eggs, or purchase as pupae.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Incubator</td>
			<td style="width:159px;">Panasonic</td>
			<td style="width:171px;">MIR-254</td>
			<td style="width:365px;">Store pupae or adult silkmoths at a constant temperature, 238 L.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Plastic box</td>
			<td style="width:159px;">Sunplatec</td>
			<td style="width:171px;">O-3</td>
			<td style="width:365px;">Store pupae or adult silkmoths, 299 &#215; 224 &#215; 62 mm L &#215; W &#215; H.</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:267px;">Copper wire</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">2-mm diameter for the attachment. Any rigid bar can be used as an alternative for making the attachment to tether a silkmoth.&#160;</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Plastic sheet</td>
			<td style="width:159px;">Kokuyo</td>
			<td style="width:171px;">VF-1420N</td>
			<td style="width:365px;">Sold as overhead projector film with thickness of 0.1 mm. Use at the tip of the attachment.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Forceps</td>
			<td style="width:159px;">As one</td>
			<td style="width:171px;">5SA</td>
			<td style="width:365px;">Remove scales on the thorax.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Adhesive</td>
			<td style="width:159px;">Konishi</td>
			<td style="width:171px;">G17</td>
			<td style="width:365px;">Bond a silkmoth to the attachment.</td>
		</tr>
		<tr height="93">
			<td height="93" style="height:93px;width:267px;">Insect-controlled robot</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Bearing an air-supported treadmill, an optical sensor, custom-built AVR-based microcontroller boards, and two DC brushless motors. It is powered by 8 &#215; AA and 3 &#215; 006P batteries.</td>
		</tr>
		<tr height="28">
			<td height="28" style="height:28px;width:267px;">Microcontroller</td>
			<td style="width:159px;">Atmel</td>
			<td style="width:171px;">ATMEGA8</td>
			<td style="width:365px;">A component of the insect-controlled robot.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">DC blower</td>
			<td style="width:159px;">Nidec</td>
			<td style="width:171px;">A34342-55</td>
			<td style="width:365px;">A component of the insect-controlled robot for floating a ball in an air-supported treadmill.&#160;</td>
		</tr>
		<tr height="40">
			<td height="40" style="height:40px;width:267px;">DC fan</td>
			<td style="width:159px;">Minebea</td>
			<td style="width:171px;">1606KL-04W-B50</td>
			<td style="width:365px;">A component of the insect-controlled robot for suctioning air containing an odor.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:267px;">Optical mouse sensor</td>
			<td style="width:159px;">Agilent technologies</td>
			<td style="width:171px;">HDNS-2000</td>
			<td style="width:365px;">A component of the insect-controlled robot, obtained from an optical mouse (M-GUWSRSV, Elecom, Japan).</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Brushless motor</td>
			<td style="width:159px;">Maxon</td>
			<td style="width:171px;">EC-45</td>
			<td style="width:365px;">A component of the insect-controlled robot for driving a wheel.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">White polystyrene ball</td>
			<td style="width:159px;"></td>
			<td style="width:171px;"></td>
			<td style="width:365px;">A component of the insect-controlled robot. Diameter 50 mm, mass approximately 2 g.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Bombykol: 
			&#160;(E,Z)-10,12-hexadecadien-1-ol</td>
			<td style="width:159px;">Shin-Etsu chemical</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Custom synthesis.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">n-hexane</td>
			<td style="width:159px;">Wako</td>
			<td style="width:171px;">085-00416</td>
			<td style="width:365px;">Solvent for bombykol.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:267px;">Wind tunnel</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">Pulling-air type, sized 1800 &#215; 900 &#215; 300 mm L &#215; W &#215; H.</td>
		</tr>
		<tr height="105">
			<td height="105" style="height:105px;width:267px;">BioSignal program</td>
			<td style="width:159px;">Custom</td>
			<td style="width:171px;"></td>
			<td style="width:365px;">A program to establish serial communication between the insect-controlled robot and a PC via Bluetooth. Used for sending commands to start/stop the robot or configuring its motor properties.&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:267px;">Camcorder</td>
			<td style="width:159px;">Sony</td>
			<td style="width:171px;">HDR-XR520V</td>
			<td style="width:365px;">Capture robot movements.</td>
		</tr>
	</tbody>
</table>

insect-controlled robot: a mobile robot platform to evaluate the odor-tracking capability of an insect

Robotic odor source localization has been a challenging area and one to which biological knowledge has been expected to contribute, as finding odor sources is an essential task for organism survival. Insects are well-studied organisms with regard to odor tracking, and their behavioral strategies have been applied to mobile robots for evaluation. This "bottom-up" approach is a fundamental way to develop biomimetic robots; however, the biological analyses and the modeling of behavioral mechanisms are still ongoing. Therefore, it is still unknown how such a biological system actually works as the controller of a robotic platform. To answer this question, we have developed an insect-controlled robot in which a male adult silkmoth (Bombyx mori) drives a robot car in response to odor stimuli; this can be regarded as a prototype of a future insect-mimetic robot. In the cockpit of the robot, a tethered silkmoth walked on an air-supported ball and an optical sensor measured the ball rotations. These rotations were translated into the movement of the two-wheeled robot. The advantage of this "hybrid" approach is that experimenters can manipulate any parameter of the robot, which enables the evaluation of the odor-tracking capability of insects and provides useful suggestions for robotic odor-tracking. Furthermore, these manipulations are non-invasive ways to alter the sensory-motor relationship of a pilot insect and will be a useful technique for understanding adaptive behaviors.

Presentamos aquí las características básicas del robot insecto controlado requerida para la localización exitosa de una fuente de olor. La comparación entre el robot y silkmoths, la eficacia del sistema de suministro de olor, y la importancia de olfativo bilateral exacto y entradas visuales son examinados. La comparación de los comportamientos de olor de seguimiento entre polillas libremente a pie y el robot de insectos ...

Watch this Scientific Journal Video about Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect at JoVE.com

Insect-controlled Robot: A Mobile Robot Platform to Evaluate the Odor-tracking Capability of an Insect

La capacidad para localizar una fuente de olor es necesario para la supervivencia de insectos y se espera que sea aplicable a artificial olor de seguimiento. El robot insecto controlado es impulsado por un Silkmoth real y nos permite evaluar la capacidad de seguimiento de olor de los insectos a través de una plataforma robótica.

Robot controlado por insectos: una plataforma del robot móvil para evaluar la capacidad de seguimiento de Olor de un insecto

Robotic odor source localization has been a challenging area and one to which biological knowledge has been expected to contribute, as finding odor ...

Research

JoVE Journal

Neuroscience

An Experimental Platform to Study the Closed-loop Performance of Brain-machine Interfaces

Una plataforma experimental para estudiar el comportamiento de circuito cerrado de interfaces cerebro-máquina

The non-stationary nature and variability of neuronal signals is a fundamental problem in brain-machine interfacing. We developed a brain-machine ...

Investigación

Neurociencias

Identification of Olfactory Volatiles using Gas Chromatography-Multi-unit Recordings (GCMR) in the Insect Antennal Lobe

Identification of Olfactory Volatiles using Gas Chromatography-Multi-unit Recordings GCMR in the Insect Antennal Lobe

La identificación de los compuestos volátiles olfativas utilizando cromatografía de gases-de varias unidades Grabaciones (GCMR) en el lóbulo antenal insectos

All  organisms inhabit a world full of sensory stimuli that determine their  behavioral and physiological response to their environment. Olfaction is ...

Determination of Photoreceptor Cell Spectral Sensitivity in an Insect Model from In Vivo Intracellular Recordings

Determination of Photoreceptor Cell Spectral Sensitivity in an Insect Model from In Vivo Intracellular Recordings

Determinación de los fotorreceptores de la célula de sensibilidad espectral en un modelo de insectos<em&gt; En Vivo</em&gt; registros intracelulares

Intracellular recording is a powerful technique used to determine how a single cell may respond to a given stimulus. In vision research, intracellular ...

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Electrophysiological Method for Recording Intracellular Voltage Responses of Drosophila Photoreceptors and Interneurons to Light Stimuli In Vivo

Método electrofisiológico para registrar las respuestas de voltaje intracelular<em&gt; Drosophila</em&gt; Los fotorreceptores y interneuronas a la luz Estímulos<em&gt; En Vivo</em

Voltage responses of insect photoreceptors and visual interneurons can be accurately recorded with conventional sharp microelectrodes. The method ...

Fabrication of High Contact-Density, Flat-Interface Nerve Electrodes for Recording and Stimulation Applications

Fabricación de alta densidad, Contacto-Interface plana Electrodos nerviosas para aplicaciones de registro y estimulación

Many attempts have been made to manufacture multi-contact nerve cuff electrodes that are safe, robust and reliable for long term neuroprosthetic ...

An Improved Method for Collection of Cerebrospinal Fluid from Anesthetized Mice

Un método mejorado para la recolección de líquido cefalorraquídeo de los ratones anestesiados

The cerebrospinal fluid (CSF) is a valuable body fluid for analysis in neuroscience research. It is one of the fluids in closest contact with the central ...

A Rat Model of Central Fatigue Using a Modified Multiple Platform Method

Modelo de una rata de la fatiga Central mediante la método de plataforma múltiple

In this article, we introduced a rat model of central fatigue using the modified multiple platform method (MMPM). The Multiple Platform box was designed ...

A Neurosphere Assay to Evaluate Endogenous Neural Stem Cell Activation in a Mouse Model of Minimal Spinal Cord Injury

Un ensayo desarrolló para evaluar la activación de células neuronales endógenos en un modelo murino de lesión medular mínima

Neural stem cells (NSCs) in the adult mammalian spinal cord are a relatively mitotically quiescent population of periventricular cells that can be studied ...

A Volumetric Method for Quantification of Cerebral Vasospasm in a Murine Model of Subarachnoid Hemorrhage

Un método volumétrico para la cuantificación de vasoespasmo Cerebral en un modelo murino de hemorragia subaracnoidea

Subarachnoid hemorrhage (SAH) is a subtype of hemorrhagic stroke. Cerebral vasospasm that occurs in the aftermath of the bleeding is an important factor ...

Functional MRI in Conjunction with a Novel MRI-compatible Hand-induced Robotic Device to Evaluate Rehabilitation of Individuals Recovering from Hand Grip Deficits

Resonancia magnética funcional en conjunto con un nuevo dispositivo robótico inducido por RMN para evaluar la rehabilitación de las personas que se recuperan de los déficits de agarre de manos

Functional magnetic resonance imaging (fMRI) is a non-invasive magnetic resonance imaging technique that images brain activation in vivo, using endogenous ...