Name: evaporation-reducing culture condition increases the reproducibility of multicellular spheroid formation in microtiter plates
Uploaded: 2017-03-07T14:00:00
Description: Watch this Scientific Journal Video about Evaporation-reducing Culture Condition Increases the Reproducibility of Multicellular Spheroid Formation in Microtiter Plates at JoVE.com

This work was supported by grants from the Czech Ministry of Education, Youth, and Sports (LO1304) and the Technological Agency of the Czech Republic (TE01020028). The authors would like to thank Dr. Lakshman Varanasi for taking the still images of environmental lids.

1. Preparation of Agarose-coated Plates
<ol>
	<li>Weigh 0.75 g of low-melting point agarose and add it to 100 mL of McCoy&#39;s 5A medium (with or without phenol red) without serum. Heat the solution in a microwave and swirl every 1-2 min to completely dissolve the agarose. Autoclave the solution to sterilize it.</li>
	<li>Cool the autoclaved agarose to about 70 &#176;C and filter it through a 500 mL, 0.22 &#181;m filter top by vacuum filtration in a laminar flow box. Aliquot the 0.75% filtered agarose solution (FAS) i...

<ol>
	<li>Kimlin, L. C., Casagrande, G., Virador, V. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+three-dimensional+(3D)+models+in+cancer+research:+An+update.">In vitro three-dimensional (3D) models in cancer research: An update.</a> Mol Carcinog. 52 (3), 167-182 (2013).</li><li>Das, V., Bruzzese, F., Kone&#269;n&#253;, P., Iannelli, F., Budillon, A., Hajd&#250;ch, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pathophysiologically+relevant+in+vitro+tumor+models+for+drug+screening.">Pathophysiologically relevant in vitro tumor models for drug screening.</a> Drug Discov. Today. 20 (7), 848-855 (2015).</li><li>Weigelt, B., Ghajar, C. M., Bissell, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+need+for+complex+3D+culture+models+to+unravel+novel+pathways+and+identify+accurate+biomarkers+in+breast+cancer.">The need for complex 3D culture models to unravel novel pathways and identify accurate biomarkers in breast cancer.</a> Adv. Drug Deliv. Rev. , 69-70 (2014).</li><li>Fischbach, C., Kong, H. J., Hsiong, S. X., Evangelista, M. B., Yuen, W., Mooney, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cancer+cell+angiogenic+capability+is+regulated+by+3D+culture+and+integrin+engagement.">Cancer cell angiogenic capability is regulated by 3D culture and integrin engagement.</a> Proc Natl Acad Sci U S A. 106 (2), 399-404 (2009).</li><li>Lao, Z., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improved+Methods+to+Generate+Spheroid+Cultures+from+Tumor+Cells,+Tumor+Cells+&amp;+Fibroblasts+or+Tumor-Fragments:+Microenvironment,+Microvesicles+and+MiRNA.">Improved Methods to Generate Spheroid Cultures from Tumor Cells, Tumor Cells &amp; Fibroblasts or Tumor-Fragments: Microenvironment, Microvesicles and MiRNA.</a> PLoS ONE. 10 (7), e0133895 (2015).</li><li>Wenzel, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+high-content+screening+for+the+identification+of+compounds+that+target+cells+in+dormant+tumor+spheroid+regions.">3D high-content screening for the identification of compounds that target cells in dormant tumor spheroid regions.</a> Exp. Cell Res. 323 (1), 131-143 (2014).</li><li>Li, Q., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+Models+of+Epithelial-Mesenchymal+Transition+in+Breast+Cancer+Metastasis:+High-Throughput+Screening+Assay+Development,+Validation,+and+Pilot+Screen.">3D Models of Epithelial-Mesenchymal Transition in Breast Cancer Metastasis: High-Throughput Screening Assay Development, Validation, and Pilot Screen.</a> J. Biomol. Screen. 16 (2), 141-154 (2011).</li><li>Das, V., F&#252;rst, T., Gursk&#225;, S., D&#382;ub&#225;k, P., Hajd&#250;ch, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reproducibility+of+Uniform+Spheroid+Formation+in+384-Well+Plates:+The+Effect+of+Medium+Evaporation.">Reproducibility of Uniform Spheroid Formation in 384-Well Plates: The Effect of Medium Evaporation.</a> J. Biomol. Screen. , (2016).</li><li>Celli, J. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+imaging-based+platform+for+high-content,+quantitative+evaluation+of+therapeutic+response+in+3D+tumour+models.">An imaging-based platform for high-content, quantitative evaluation of therapeutic response in 3D tumour models.</a> Sci. Rep. 17 (4), 3751 (2014).</li><li>Solomon, M. A., Lemera, J., D'Souza, G. G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+an+in+vitro+tumor+spheroid+culture+model+amenable+to+high-throughput+testing+of+potential+anticancer+nanotherapeutics.">Development of an in vitro tumor spheroid culture model amenable to high-throughput testing of potential anticancer nanotherapeutics.</a> J. Liposome Res. 26 (3), 246-260 (2016).</li><li>Costa, E. C., Gaspar, V. M., Coutinho, P., Correia, I. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimization+of+liquid+overlay+technique+to+formulate+heterogenic+3D+co-cultures+models.">Optimization of liquid overlay technique to formulate heterogenic 3D co-cultures models.</a> Biotechnol. Bioeng. 111 (8), 1672-1685 (2014).</li><li>Walzl, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Simple+and+Cost+Efficient+Method+to+Avoid+Unequal+Evaporation+in+Cellular+Screening+Assays,+Which+Restores+Cellular+Metabolic+Activity.">A Simple and Cost Efficient Method to Avoid Unequal Evaporation in Cellular Screening Assays, Which Restores Cellular Metabolic Activity.</a> Int. J. Appl. Sci. Technol. 2 (6), 17-25 (2012).</li><li>Berthier, E., Warrick, J., Yu, H., Beebe, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Managing+evaporation+for+more+robust+microscale+assays.+Part+1.+Volume+loss+in+high+throughput+assays.">Managing evaporation for more robust microscale assays. Part 1. Volume loss in high throughput assays.</a> Lab Chip. 8 (6), 852-859 (2008).</li><li>Zanoni, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+tumor+spheroid+models+for+in+vitro+therapeutic+screening:+a+systematic+approach+to+enhance+the+biological+relevance+of+data+obtained.">3D tumor spheroid models for in vitro therapeutic screening: a systematic approach to enhance the biological relevance of data obtained.</a> Sci. Rep. 6, 19103 (2016).</li><li>Zimmermann, H. F., John, G. T., Trauthwein, H., Dingerdissen, U., Huthmacher, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rapid+Evaluation+of+Oxygen+and+Water+Permeation+through+Microplate+Sealing+Tapes.">Rapid Evaluation of Oxygen and Water Permeation through Microplate Sealing Tapes.</a> Biotechnol. Prog. 19 (3), 1061-1063 (2003).</li><li>Sirenko, O., Mitlo, T., Hesley, J., Luke, S., Owens, W., Cromwell, E. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-Content+Assays+for+Characterizing+the+Viability+and+Morphology+of+3D+Cancer+Spheroid+Cultures.">High-Content Assays for Characterizing the Viability and Morphology of 3D Cancer Spheroid Cultures.</a> Assay Drug Dev. Technol. 13 (7), 402-414 (2015).</li><li>Chen, W., Wong, C., Vosburgh, E., Levine, A. J., Foran, D. J., Xu, E. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-throughput+Image+Analysis+of+Tumor+Spheroids:+A+User-friendly+Software+Application+to+Measure+the+Size+of+Spheroids+Automatically.">High-throughput Image Analysis of Tumor Spheroids: A User-friendly Software Application to Measure the Size of Spheroids Automatically.</a> J. Vis. Exp. (89), e51639 (2014).</li></ol>

Coating 384-Well TC Plates with Filtered Agarose
The standard practice in LOT is to use a 1-1.5% low-melting point agarose to coat the plates, which requires the agarose and/or dispensing unit to be kept heated to prevent the gelling of the agarose6. The gelling of the agarose is of potential concern while preparing multiple plates using liquid dispensing cassettes with small tubing apertures ranging between 0.2 and 0.4 mm in diameter. To overcome the potential issue of cl...

Cancer cells in tumors are physiologically arranged in a complex, 3-dimensional (3D) structure surrounded by extracellular matrix and interacting cells. As nearly all cells in tissues reside in a 3D environment, the need for more physiologically relevant in vitro tumor models that mimic tumor traits has resulted in the development of several 3D culture techniques1,2,3. These models are now becoming fundamental research tools for studying the role of the tumor microenvironment on metastasis and cell response to therapeutics in 3D2. Moreover, compared to 2-dimensional (2D) cell cultures4, 3D models allow for a better understanding of tumor-stroma interactions, which affect cell signaling pathways.
Multicellular tumor spheroids (MCTSes) of cancer cell lines are frequently used in 3D cell culture models due to their relative closeness to in vivo tumors. Out of the several techniques in use, the liquid-overlay technique (LOT) of MCTS generation on agarose-coated plates has gained significant interest for lead optimization and target validation5,6,7,8,9,10,11. This is evident from the recent studies that were successfully able to run pilot screens of compound libraries in MCTS cultures using LOT6,7. However, well-to-well variability in MCTS morphology and growth due to the evaporation-induced uneven loss of medium are common hurdles that accompany the LOT using microtiter plates (MPs). Consequently, the formation of non-uniform MCTSes compromises the significance and relevance of data from pharmacological assays8,12,13. In addition to the reproducibility issues, another practical problem that affects LOT-based high-throughput assays is the coating of the MPs with agarose when using automatic liquid dispensing units. Although the dispensing unit can be kept heated to prevent the gelling of agarose, the clogging of the dispensing cassette and tubing is a potential concern for robotic systems6.
To overcome some of these challenges, we have recently devised a few modifications in the LOT for MCTS culture8. These modifications are mainly based on possible ways to prevent uneven medium loss from the MPs using instruments that are commonly found in high-throughput screening laboratories. A detailed procedure of the modified LOT for the generation of uniformly sized and reproducible MCTSes across 384-well plates (WPs) is presented here. The manuscript also presents a semi-automated routine for the evaluation of MCTS size, particularly in partially disintegrated, drug-treated MCTSes that do not have a clearly defined boundary for the measurement of cross-sectional area.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Agarose</td>
			<td>Sigma-Aldrich</td>
			<td>A9414</td>
			<td>Low-melting</td>
		</tr>
		<tr>
			<td>McCOY&#39;s 5A Medium</td>
			<td>Sigma-Aldrich</td>
			<td>M8403</td>
			<td></td>
		</tr>
		<tr>
			<td>&#8220;rapid&#8221; Filtermax filter</td>
			<td>TPP</td>
			<td>99505</td>
			<td>0.22 &#956;m, 500 mL</td>
		</tr>
		<tr>
			<td>Multidrop&#8482; Combi Reagent Dispenser&#160;</td>
			<td>Thermo Fisher Scientific</td>
			<td>5840300</td>
			<td></td>
		</tr>
		<tr>
			<td>Small Tube Dispensing cassette&#160;</td>
			<td>Thermo Fisher Scientific</td>
			<td>24073295</td>
			<td>Metal tip&#160;</td>
		</tr>
		<tr>
			<td>384-well TC plate&#160;</td>
			<td>PerkinElmer</td>
			<td>6057308</td>
			<td>Plate type- CellCarrier</td>
		</tr>
		<tr>
			<td>Standard Tube Dispensing Cassette</td>
			<td>Thermo Fisher Scientific</td>
			<td>24072670</td>
			<td></td>
		</tr>
		<tr>
			<td>MicroClime Environmental Lid</td>
			<td>Labcyte</td>
			<td>LLS-0310</td>
			<td></td>
		</tr>
		<tr>
			<td>DMSO</td>
			<td>Sigma</td>
			<td>D4540</td>
			<td></td>
		</tr>
		<tr>
			<td>Rotary Incubator (SteriStore )</td>
			<td>HighRes Biosolutions</td>
			<td>23641</td>
			<td>Serial No.: D00384</td>
		</tr>
		<tr>
			<td>Microplate Washer Dispenser&#160;</td>
			<td>BioTek</td>
			<td>Unspecified</td>
			<td>Model: EL406&#160;</td>
		</tr>
		<tr>
			<td>High-Content Imaging System (CellVoyager )</td>
			<td>Yokogawa Electric Corporation</td>
			<td>Unspecified</td>
			<td>Model: CV7000</td>
		</tr>
		<tr>
			<td>Orange G</td>
			<td>New England Biolabs</td>
			<td>B7022S</td>
			<td></td>
		</tr>
		<tr>
			<td>TrypLE&#8482; Express recombinant cell dissociation reagent</td>
			<td>Thermo Fisher Scientific</td>
			<td>12604021</td>
			<td>Phenol red free</td>
		</tr>
	</tbody>
</table>

evaporation-reducing culture condition increases the reproducibility of multicellular spheroid formation in microtiter plates

Tumor models that closely imitate in vivo conditions are becoming increasingly popular in drug discovery and development for the screening of potential anti-cancer drugs. Multicellular tumor spheroids (MCTSes) effectively mimic the physiological conditions of solid tumors, making them excellent in vitro models for lead optimization and target validation. Out of the various techniques available for MCTS culture, the liquid-overlay method on agarose is one of the most inexpensive methods for MCTS generation. However, the reliable transfer of MCTS cultures using liquid-overlay for high-throughput screening may be compromised by a number of limitations, including the coating of microtiter plates (MPs) with agarose and the irreproducibility of uniform MCTS formation across wells. MPs are significantly prone to edge effects that result from excessive evaporation of medium from the exterior of the plate, preventing the use of the entire plate for drug tests. This manuscript provides detailed technical improvements to the liquid-overlay technique to increase the scalability and reproducibility of uniform MCTS formation. Additionally, details on a simple, semi-automatic, and universally applicable software tool for the evaluation of MCTS features after drug treatment is presented.

The uneven loss of medium, particularly from peripheral wells, is a frequently encountered issue in MPs with small culture volumes. Substantially improved culture conditions, such as incubators with well-controlled temperature/humidification systems and evaporation-reducing MPs and plate lids, reduce the significant loss of medium across wells8. To measure the relative evaporation, equal volumes of Orange G (OG) were added to each well, and the change in OG absorba...

Watch this Scientific Journal Video about Evaporation-reducing Culture Condition Increases the Reproducibility of Multicellular Spheroid Formation in Microtiter Plates at JoVE.com

Evaporation-reducing Culture Condition Increases the Reproducibility of Multicellular Spheroid Formation in Microtiter Plates

The uneven loss of medium from microtiter plates affects the reproducibility of uniform multicellular tumor spheroid formation. Improving culture conditions to reduce significant medium loss will improve the reproducibility of spheroid formation and the results of spheroid-based assays using the liquid-overlay technique.

Tumor models that closely imitate in vivo conditions are becoming increasingly popular in drug discovery and development for the screening of potential ...

The overall goal of this procedure is to improve the scalability and reproducibility of uniform spheroid formation using a liquid overlay technique in 384 well plates. The main advantage of this technique is that it reduces excessive medium re-operation from multiple plates, and thereby improving the reproducibility of spheroid formation. We have developed and validated the method of culturing 3D spheroids for arthropod screening tests in our laboratory and our study was to evaluate what is the edge effect in the plates of the multicellular cultures.Today I will demonstrate the procedure together with Sona, a poster from the laboratory. Begin this procedure by weighting out zero point seven five grams of low melting point agarose and add it to 100 milliliters of mccoy's 5a medium with or without phenol red and without serum. Heat the solution in a microwave and swirl it every one to two minutes to completely dissolve the agarose.Then autoclave the solution to sterilize it. After allowing the autoclaved agarose to cool to about 70 degrees Celsius, filter it through a 500 milliliter zero point two two micrometer bottle top filter in a laminar flow box. Next, if the entire solution will not be used at once, aliquot it.Store this ready to use agarose solution aseptically in a cold room or four degree Celsius fridge for up to four weeks. Working in a flow box, install a plastic or metal-tipped dispensing cassette in a combi reagent dispenser. Place the tubing weight into a vessel of 70 percent ethanol and then prime the cassette.Then, move the tubing weight into a vessel of PBS and prime it again. Next, heat a stored aliquot of filtered agarose solution in the microwave to melt it. Prime the dispensing cassette with agarose solution and then start the protocol to coat 384 well tissue culture treated micro plates with 15 microliters of filtered agarose solution.Allow the agarose in the plate to cool for 15 to 20 minutes before either seeding the cells as described in the next section of the video, or storing them at four degrees Celsius and away from direct light. Finally, to clean the dispensing cassette, place the tubing weight in 70 to 80 degree celsius sterile water and press the prime button on the dispenser. This will remove any remaining agarose in the cassette tips and the tubes.The following cell seeding process should be performed under sterile conditions and in a laminar flow box. Begin by removing the required number of agarose coated 384 well tissue culture treated microplates from cold storage and allowing them to equilibrate to room temperature for 15 minutes. In the meantime, prepare the combi reagent dispenser for cell seeing by priming a standard tube dispensing cassette with 70 percent ethanol and sterile PBS.Next, using the manual setting buttons on the dispenser, adjust the seeing volume to the required microliter and the dispensing speed to medium. Use recombinant cell dissociation enzyme to remove adherent human colorectal carcinoma HCT116 cells from a tissue culture flask. In a sterile beaker, make a cell suspension stock with cells at a density of 2.5 time 10 to the fourth cells per milliliter per well in 50 microliters of complete growth medium.If more than one 384 well plate will be seeded, use a magnetic stirrer to prevent them from settling to the bottom of the beaker. Using a dispenser, add the 25 hundred cells to each well of a 384 well plate. Allow the plates to rest for 30 minutes at room temperature.Meanwhile, take an evaporation reducing environmental microplate lid and using a five milliliter pipette, dispense four milliliters of five percent dimethylsulfoxide into the left side trough, sweeping slowly up and down. Repeat this process with the right side trough. Ensure that the liquid added to the side troughs does not merge at the center of the lid and leave a gap for gas exchange.If too much liquid is added, it will seep into the exterior of the lid and subsequently enter the outer well of the 384 tissue culture plate. After 30 minutes has passed, examine the cells under a microscope. Resting of the plates for 30 minutes allows the cells to settle down completely in the well bottom and close to each other, which is important for the formation of single spheroids per well.Centrifuge the seeded plates for 15 minutes at four times G.After the spin, fill the liquid reservoir of the 384 tissue culture plate with sterile water and replace the regular plate lids with the liquid filled environmental lids. Place the plates in a 37 degree celsius rotary incubator with 95 percent humidity, five percent CO2, and 20 percent oxygen and allow the cells to aggregate into multicellular tumor spheroids or MCTS's for four days. Avoid opening the incubator door for too long in the subsequent days so that the humidity level does not drop abruptly.On day four following NCTS formation, use an automated microplate washer dispenser to add 30 microliters of prewarmed medium to each well. Place the MCTSs back in the incubator and allow the MCTSs to grow until they attain the desired size for experimentation. Every three days, to replace the medium, empirically adjust the Z height of the washer manifold and set the dispensing speed and the speed at which the wash manifold travels down into the wells at the lowest rate to minimize turbulence in the wells.Aspirate 30 microliters of medium per well and replace it with 30 microliters of fresh, pre-warmed medium. Then return the cells to the incubator. Image the MCTSs in a high content automated imaging system using a four X air objecting with a numerical aperture of 16.Using the imaging software, set the exposure time to 11 milliseconds and the binning to four by four. Adjust the number and spacing of the z-stacks and the pixel binning as desired for the experiment to capture an entire MCTS in each well. Process the 2D images stepwise to measure the MCTS area, major and minor axis, perimeter, and solidity.Please see the accompanying m-code and text read me files for specific instructions. To determine the potential applicability of the routine, seven day old MCTSs were treated with different concentrations of the anti-cancer drugs, Paclitaxel, PTX, Vincristine, VCR, Oxalyplatin, OXA, Doxyrubicin, DOX, and five flurouracil, 5-FU, at three different concentrations for four days. Images of the MCTSs are shown here.These images were analyzed to determine the area, major and minor axes, perimeter, and solidity of drug treated MCTSs compared to controls, CTLs. The major and minor axes were used to calculate the geometrical volume. There was a concentration dependent decrease in MCTS area and volume after drug treatment.Although point zero one micrograms per milliliter of Vincrystine and zero point four micrograms per milliliter Doxyrubicin and five Fluorouracil resulted in an increase in MCTS area, the volume was significantly increased only following point zero zero one micrograms per milliliters Vincrystine. MCTS perimeter was significantly different only at the highest concentrations of Packlitaxel, Doxyrubicin, and Five Fleurouracil which completely affected the MCTS size. Treament with Packlitaxel and Vincrystine at zero point two five micrograms per milliliter and zero point zero six micrograms per milliliter and Doxyrubicin and Five Fleurouracil at 100 micrograms per milliliter, resulted in a significant decrease in the solidity, indicating a complete to partial disintegration of the MCTSs.Taken together, these data demonstrate the utility of this method in investigating potential anti cancer drugs. Once mastered, this technique can be done in two hours if performed properly. When attempting this procedure, it is important to note that not all cell lines are suitable for a particular 3D culture method and different cell lines form spheroids that show differences in spheroid shapes, size, histology, and growth kinetics.The stimulatory routine that we have developed allows effective evaluation of spheroid size, particularly in partially disintegrated drug treated spheroid that do not have a clearly defined boundary for the measurement of cross sectional area. After watching this video, you should have a good understanding of the fact that modification present here does not require any additional equipment or consumables and can be routinely implemented in your arthropod screening lab.

Research

JoVE Journal

Cancer Research

Utilizing Functional Genomics Screening to Identify Potentially Novel Drug Targets in Cancer Cell Spheroid Cultures

The identification of functional driver events in cancer is central to furthering our understanding of cancer biology and indispensable for the discovery ...

Therapy Testing in a Spheroid-based 3D Cell Culture Model for Head and Neck Squamous Cell Carcinoma

Current treatment options for advanced and recurrent head and neck squamous cell carcinoma (HNSCC) enclose radiation and chemo-radiation approaches with ...

A Comprehensive Procedure to Evaluate the In Vitro Performance of the Putative Hemangioblastoma Neovascularization Using the Spheroid Sprouting Assay

A Comprehensive Procedure to Evaluate the In Vitro Performance of the Putative Hemangioblastoma Neovascularization Using the Spheroid Sprouting Assay

The inactivation of the von Hippel-Lindau (VHL) tumor suppressor gene plays a crucial role in the development of hemangioblastomas (HBs) within the human ...

A 3D Organotypic Melanoma Spheroid Skin Model

Malignant transformation of melanocytes, the pigment cells of human skin, causes formation of melanoma, a highly aggressive cancer with increased ...

Potentiation of Anticancer Antibody Efficacy by Antineoplastic Drugs: Detection of Antibody-drug Synergism Using the Combination Index Equation

Potentiation of hostile monoclonal antibodies (mAb) by chemotherapeutic agents constitutes a valuable strategy for designing effective and safer therapy ...

Identification, Histological Characterization, and Dissection of Mouse Prostate Lobes for In Vitro 3D Spheroid Culture Models

Genetically engineered mouse models (GEMMs) serve as effective pre-clinical models for investigating most types of human cancers, including prostate ...

A Spheroid Killing Assay by CAR T Cells

Immunotherapy has become a field of growing interest in the fight against cancer otherwise untreatable. Among all immunotherapeutic methods, chimeric ...

Fully Human Tumor-based Matrix in Three-dimensional Spheroid Invasion Assay

Two-dimensional cell culture-based assays are commonly used in in vitro cancer research. However, they lack several basic elements that form the tumor ...

Assessing Cell Viability and Death in 3D Spheroid Cultures of Cancer Cells

Three-dimensional spheroids of cancer cells are important tools for both cancer drug screens and for gaining mechanistic insight into cancer cell biology. ...

A 3D Spheroid Model for Glioblastoma

Two-dimensional (2D) cell cultures do not mimic in vivo tumor growth satisfactorily. Therefore, three-dimensional (3D) culture spheroid models were ...