Name: creation of cardiac tissue exhibiting mechanical integration of spheroids using 3d bioprinting
Uploaded: 2017-07-02T13:00:00
Description: Watch this Scientific Journal Video about Creation of Cardiac Tissue Exhibiting Mechanical Integration of Spheroids Using 3D Bioprinting at JoVE.com

作者承认以下资金来源：神经科学心血管研究基金和马里兰州干细胞研究基金（2016-MSCRFI-2735）。

1.心肌细胞的制备<ol><li>如上所述，在用基底膜基质包被的6孔板上产生和培养人诱导的多能干细胞（hiPSC）。 </li><li>使用先前描述的方法11,12将hiPSC分化为hiPSC来源的心肌细胞（hiPSC-CM）。 </li><li>分化后第19天，使用2mL胰蛋白酶/ EDTA的胰蛋白酶/ EDTA 0.05％的室温分离5分钟。 </li><li>在光学显微镜下监测心肌细胞以观察细胞解离。 </li><li>使用2mL胰蛋白酶抑制剂中和胰蛋白酶0.0125％。 ...

<ol>
	<li>Murphy, S. V., Atala, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+bioprinting+of+tissues+and+organs.">3D bioprinting of tissues and organs.</a> Nat Biotech. 32, 773-785 (2014).</li><li>Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., Bashir, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+biofabrication+strategies+for+tissue+engineering+and+regenerative+medicine.">3D biofabrication strategies for tissue engineering and regenerative medicine.</a> Ann Rev Biomed Eng. 16, 247-276 (2014).</li><li>Patra, S., Young, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Review+of+3D+Printing+Techniques+and+the+Future+in+Biofabrication+of+Bioprinted+Tissue.">A Review of 3D Printing Techniques and the Future in Biofabrication of Bioprinted Tissue.</a> Cell Biochem Biophy. 74, 93-98 (2016).</li><li>Moldovan, N. I., Hibino, N., Nakayama, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Principles+of+the+Kenzan+Method+for+Robotic+Cell+Spheroid-Based+Three-Dimensional+Bioprinting.">Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting.</a> Tissue Eng Part B Rev. , (2017).</li><li>Cui, X., Boland, T., D'Lima, D. D., Lotz, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal+inkjet+printing+in+tissue+engineering+and+regenerative+medicine.">Thermal inkjet printing in tissue engineering and regenerative medicine.</a> Recent Pat Drug Deliv Formul. 6, 149-155 (2012).</li><li>Murphy, C. M., Haugh, M. G., O'Brien, F. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+mean+pore+size+on+cell+attachment,+proliferation+and+migration+in+collagen-glycosaminoglycan+scaffolds+for+bone+tissue+engineering.">The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering.</a> Biomater. 31, 461-466 (2010).</li><li>Noguchi, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+three-dimensional+pre-vascularized+scaffold-free+contractile+cardiac+patch+for+treating+heart+disease.">Development of a three-dimensional pre-vascularized scaffold-free contractile cardiac patch for treating heart disease.</a> J Heart Lung Transpl. 35, 137-145 (2016).</li><li>Mironov, V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Organ+printing:+tissue+spheroids+as+building+blocks.">Organ printing: tissue spheroids as building blocks.</a> Biomater. 30, 2164-2174 (2009).</li><li>Itoh, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scaffold-Free+Tubular+Tissues+Created+by+a+Bio-3D+Printer+Undergo+Remodeling+and+Endothelialization+when+Implanted+in+Rat+Aortae.">Scaffold-Free Tubular Tissues Created by a Bio-3D Printer Undergo Remodeling and Endothelialization when Implanted in Rat Aortae.</a> PloS One. 10, e0136681 (2015).</li><li>Lieu, P. T., Fontes, A., Vemuri, M. C., Macarthur, C. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+induced+pluripotent+stem+cells+with+CytoTune,+a+non-integrating+Sendai+virus.">Generation of induced pluripotent stem cells with CytoTune, a non-integrating Sendai virus.</a> Methods Mol Biol. 997, 45-56 (2013).</li><li>Li, S., Cheng, H., Tomaselli, G. F., Li, R. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanistic+basis+of+excitation-contraction+coupling+in+human+pluripotent+stem+cell-derived+ventricular+cardiomyocytes+revealed+by+Ca2++spark+characteristics:+direct+evidence+of+functional+Ca2+-induced+Ca2++release.">Mechanistic basis of excitation-contraction coupling in human pluripotent stem cell-derived ventricular cardiomyocytes revealed by Ca2+ spark characteristics: direct evidence of functional Ca2+-induced Ca2+ release.</a> Heart Rhythm. 11, 133-140 (2014).</li><li>Boheler, K. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Human+Pluripotent+Stem+Cell+Surface+N-Glycoproteome+Resource+Reveals+Markers,+Extracellular+Epitopes,+and+Drug+Targets.">A Human Pluripotent Stem Cell Surface N-Glycoproteome Resource Reveals Markers, Extracellular Epitopes, and Drug Targets.</a> Stem Cell Rep. 3, 185-203 (2014).</li><li>ScienCell Research Laboratories. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Human Cardiac Fibroblasts (adult ventricular) Product Sheet. , (2017).</li><li>Lonza Walkersville, Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Endothelial Cell Systems - Technical Information &amp; Instructions.,. , (2015).</li><li>Thermo Fisher Scientific, Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Immunofluorescence Method for IHC Detection. , (2017).</li><li>Murata, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+preliminary+study+of+osteochondral+regeneration+using+a+scaffold-free+three-dimensional+construct+of+porcine+adipose+tissue-derived+mesenchymal+stem+cells.">A preliminary study of osteochondral regeneration using a scaffold-free three-dimensional construct of porcine adipose tissue-derived mesenchymal stem cells.</a> J Orthop Surg Res. 10, (2015).</li><li>Mosadegh, B., Xiong, G., Dunham, S., Min, J. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Current+progress+in+3D+printing+for+cardiovascular+tissue+engineering.">Current progress in 3D printing for cardiovascular tissue engineering.</a> Biomed Mater. 10, 034002 (2015).</li><li>Chang, C. C., Boland, E. D., Williams, S. K., Hoying, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct-write+Bioprinting+Three-Dimensional+Biohybrid+Systems+for+Future+Regenerative+Therapies.">Direct-write Bioprinting Three-Dimensional Biohybrid Systems for Future Regenerative Therapies.</a> J Biomed Mater Res. Part B, Appl Biomater. 98, 160-170 (2011).</li><li>Lee, J. M., Sing, S. L., Tan, E. Y. S., Yeong, W. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bioprinting+in+cardiovascular+tissue+engineering:+a+review.">Bioprinting in cardiovascular tissue engineering: a review.</a> International J Bioprinting. 2 (2016), (2016).</li></ol>

It is important to use beating, functional spheroids for 3D bioprinting. If spheroids are not beating, continuing to use them will invariably result in a non-functional 3D bioprinted patch.
One benefit of this approach is the ability to manipulate the cell content of the patch by varying the total number of cells and the percentage of cardiomyocytes, endothelial cells, and fibroblasts in the spheroids. This allows for many different types of cardiac patches to be printed, with varying histolog...

3D生物印迹有很多不同的方法， 1，2，3 。 3D生物打印通常通过印刷技术1进行分类，例如喷墨生物印刷，微压缩生物印刷，激光辅助生物印刷，方法的组合或更新的方法。 3D生物印迹也可以分为无支架或支架依赖的方法4 。 3D生物印迹的大多数方法是支架依赖的，其中需要生物材料， 例如生物蛋白5或支架6 。然而，支架依赖的3D生物印迹面临许多问题和局限性，如脚手架材料的免疫原性，专有生物蛋白的成本，降解产物的速度和毒性等。 SCAF已经尝试使用球体的无折叠心脏组织工程8 ，有可能克服支架依赖组织工程的这些缺点。然而，正如作者在该论文中所承认的那样，在生物制造过程中难以强力地处理和定位固定位置的球体。伴随使用3D生物印迹和基于球形的组织工程有可能克服这些困难。在本协议中，我们描述了没有其他生物材料的心脏组织的3D生物印迹，仅使用球形形式的细胞。 基于无支架的基于球体的3D生物打印机9具有使用真空抽吸拾取单个球体的能力，并将其定位在针阵列上。 3D生物印刷中针阵列上的定位球体的概念是从古代日本使用针阵（被称为“ kenzan ”）的灵感来的nese艺术的花卉安排， ikebana。该系统允许球体精确地定位在任何配置中，并导致单个球体在短时间内熔合在一起以产生3D生物印刷组织。因此，该方法允许容易地操纵球体，对于无支架器官生物制造的未来具有潜在的影响。

<table border="0" cellpadding="0" cellspacing="0" width="587">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:176px;">Geltrex</td>
			<td style="width:157px;">Invitrogen&#160;</td>
			<td style="width:88px;">A1413202</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:176px;">Trypsin/EDTA 0.05%</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">15400054</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:176px;">Defined Trypsin inhibitor 0.0125%</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">R007100</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:176px;">RPMI Cell Media</td>
			<td style="width:157px;">Invitrogen</td>
			<td style="width:88px;">11875-093</td>
			<td style="width:167px;">RPMI supplemented with B27 constitutes HIPSC-CM culture media</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:176px;">B-27 Supplement</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">17504044</td>
			<td style="width:167px;">RPMI supplemented with B27 constitutes HIPSC-CM culture media</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:176px;">Countess Automated Cell Counter</td>
			<td style="width:157px;">Invitrogen</td>
			<td style="width:88px;">C10227</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:176px;">Human cardiac fibroblasts (adult ventricular type)</td>
			<td style="width:157px;">Sciencell</td>
			<td style="width:88px;">6310</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:176px;">Human umbilical vein endothelial cells</td>
			<td style="width:157px;">Lonza</td>
			<td style="width:88px;">CC-2935</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:176px;">PrimeSurface ultra-low attachment 96-well U-bottom plates&#160;</td>
			<td style="width:157px;">Akita Sumitomo Bakelite Co.</td>
			<td style="width:88px;">MS-9096UZ</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:176px;">Regenova Bio 3D Printer</td>
			<td style="width:157px;">Cyfuse Biomedical K.K.</td>
			<td style="width:88px;">N/A</td>
			<td>www.cyfusebio.com/en/</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Trypan Blue Solution, 0.4%</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">15250061</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:176px;">Troponin T Antibody</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">701620</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:176px;">Connexin 43 (Cx43) Antibody</td>
			<td style="width:157px;">Chemicon</td>
			<td>MAB3068</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:176px;">ProLong Gold Antifade Mountant with DAPI</td>
			<td style="width:157px;">Thermo Fisher</td>
			<td style="width:88px;">P36935</td>
			<td></td>
		</tr>
	</tbody>
</table>

creation of cardiac tissue exhibiting mechanical integration of spheroids using 3d bioprinting

该协议描述了仅使用细胞而不使用生物材料的心脏组织的3D生物印迹。首先分离心肌细胞，内皮细胞和成纤维细胞，计数并以所需细胞比例混合。它们在超低附件96孔板中的各个孔中共培养。在3天内，殴打球体。然后使用真空抽吸由喷嘴拾取这些球体，并使用3D生物打印机在针阵列上组装。然后允许球体在针阵列上熔断。三维生物印迹三天后，球状体作为完整的贴片被去除，已经自发地发生跳动。 3D生物印迹的心脏贴片显示组件球体的机械整合，并且在心脏组织再生和心脏病的3D模型中是非常有希望的。

在步骤4.4（共培养）结束时，每个孔中的细胞应在超低附着96孔U底板的底部聚集，通过重力形成球体。这些球体包含hiPSC-CM，HCF和HUVEC，并且可以在光学显微镜下目视检查，其中它们应该通过二维投影呈现圆形（ 图1 ）。在步骤6.3结束时，3D生物印迹的心脏贴片应该包含组织空隙，这是由于针阵列产生的针孔（ 图2左侧）。在这?...

Watch this Scientific Journal Video about Creation of Cardiac Tissue Exhibiting Mechanical Integration of Spheroids Using 3D Bioprinting at JoVE.com

Creation of Cardiac Tissue Exhibiting Mechanical Integration of Spheroids Using 3D Bioprinting

该协议描述了不使用生物材料的心脏组织的3D生物印迹。 3D生物印迹的心脏贴片显示组件球体的机械整合，并且在心脏组织再生和心脏病的3D模型中是非常有希望的。

使用3D生物印刷创建心脏组织展示球体的机械整合

This protocol describes 3D bioprinting of cardiac tissue without the use of biomaterials, using only cells. Cardiomyocytes, endothelial cells and ...

Research

JoVE Journal

Bioengineering

Plasma Lithography Surface Patterning for Creation of Cell Networks

等离子体表面图案光刻技术的蜂窝网络创作

Systematic manipulation of a cell microenvironment with micro- and nanoscale resolution is often required for deciphering various cellular and molecular ...

科研

生物工程

Bioprinting Cellularized Constructs Using a Tissue-specific Hydrogel Bioink

生物印刷细胞化构造使用组织特异性水凝胶生物油墨

Bioprinting has emerged as a versatile biofabrication approach for creating tissue engineered organ constructs. These constructs have potential use as ...

Bioprinting of Cartilage and Skin Tissue Analogs Utilizing a Novel Passive Mixing Unit Technique for Bioink Precellularization

Bioink Precellularization 无源混合装置打印软骨及皮肤组织类似物的应用

Bioprinting is a powerful technique for the rapid and reproducible fabrication of constructs for tissue engineering applications. In this study, both ...

A Net Mold-based Method of Scaffold-free Three-Dimensional Cardiac Tissue Creation

基于网模的无支架三维心脏组织创建方法

This protocol describes a novel and easy net mold-based method to create three-dimensional (3-D) cardiac tissues without additional scaffold material. ...

Protocols of 3D Bioprinting of Gelatin Methacryloyl Hydrogel Based Bioinks

明胶美沙克里洛醇水凝胶生物油墨3D生物印刷方案

Gelatin methacryloyl (GelMA) has become a popular biomaterial in the field of bioprinting. The derivation of this material is gelatin, which is hydrolyzed ...

Direct Bioprinting of 3D Multicellular Breast Spheroids onto Endothelial Networks

将3D多细胞乳房球体直接生物打印到内皮网络

Bioprinting is emerging as a promising tool to fabricate 3D human cancer models that better recapitulate critical hallmarks of in vivo tissue ...

Fabrication of 3D Cardiac Microtissue Arrays using Human iPSC-Derived Cardiomyocytes, Cardiac Fibroblasts, and Endothelial Cells

使用人iPSC衍生的心肌细胞，心脏成纤维细胞和内皮细胞制造3D心脏微组织阵列

Generation of human cardiomyocytes (CMs), cardiac fibroblasts (CFs), and endothelial cells (ECs) from induced pluripotent stem cells (iPSCs) has provided ...

Developing 3D Organized Human Cardiac Tissue within a Microfluidic Platform

在微流体平台内开发 3D 组织人类心脏组织

The leading cause of death worldwide persists as cardiovascular disease (CVD). However, modeling the physiological and biological complexity of the heart ...

3D Bioprinting of Murine Cortical Astrocytes for Engineering Neural-Like Tissue

用于工程神经样组织的小鼠皮质星形胶质细胞的3D生物打印

Astrocytes are glial cells with an essential role in the central nervous system (CNS), including neuronal support and functionality. These cells also ...