Name: preparation of janus particles and alternating current electrokinetic measurements with a rapidly fabricated indium tin oxide electrode array
Uploaded: 2017-06-23T14:00:00
Description: Watch this Scientific Journal Video about Preparation of Janus Particles and Alternating Current Electrokinetic Measurements with a Rapidly Fabricated Indium Tin Oxide Electrode Array at JoVE.com

This work was supported by the Ministry of Science and Technology, Taiwan, R.O.C., under Grant NSC 103-2112-M-002-008-MY3.

1. Fabrication of the Microchip
<ol>
	<li>Preparation of the ITO electrode
	<ol>
		<li>Use commercial illustration software to draw a cross pattern. Set the distance between the diagonal electrodes to 160 &#181;m and make the arms of the cross pattern 30 mm wide and 55 mm long, as shown in Figure 1. Save the illustration file as a DXF file.</li>
		<li>Use a glass cutter to trim the ITO glass to a size of 25 mm x 50 mm (width x length). Use 75% ethanol and DI water to rinse...

<ol>
	<li>Walther, A., M&#252;ller, A. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Janus+particles.">Janus particles.</a> Soft Matter. 4 (4), 663-668 (2008).</li><li>Chen, Y. -. L., Jiang, H. -. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrorotation+of+a+metallic+coated+Janus+particle+under+AC+electric+fields.">Electrorotation of a metallic coated Janus particle under AC electric fields.</a> Appl Phys Lett. 109 (19), 191605 (2016).</li><li>Zhang, L., Zhu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Directed+assembly+of+janus+particles+under+high+frequency+ac-electric+fields:+Effects+of+medium+conductivity+and+colloidal+surface+chemistry.">Directed assembly of janus particles under high frequency ac-electric fields: Effects of medium conductivity and colloidal surface chemistry.</a> Langmuir. 28 (37), 13201-13207 (2012).</li><li>Gangwal, S., Cayre, O. J., Velev, O. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dielectrophoretic+assembly+of+metallodielectric+Janus+particles+in+AC+electric+fields.">Dielectrophoretic assembly of metallodielectric Janus particles in AC electric fields.</a> Langmuir. 24 (23), 13312-13320 (2008).</li><li>Zhang, L., Zhu, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dielectrophoresis+of+Janus+particles+under+high+frequency+ac-electric+fields.">Dielectrophoresis of Janus particles under high frequency ac-electric fields.</a> Appl Phys Lett. 96 (14), 141902 (2010).</li><li>Chen, J., Zhang, H., Zheng, X., Cui, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Janus+particle+microshuttle:+1D+directional+self-propulsion+modulated+by+AC+electrical+field.">Janus particle microshuttle: 1D directional self-propulsion modulated by AC electrical field.</a> AIP Adv. 4 (3), 031325 (2014).</li><li>Gangwal, S., Cayre, O. J., Bazant, M. Z., Velev, O. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Induced-charge+electrophoresis+of+metallodielectric+particles.">Induced-charge electrophoresis of metallodielectric particles.</a> Phys Rev Lett. 100 (5), 058302 (2008).</li><li>Peng, C., Lazo, I., Shiyanovskii, S. V., Lavrentovich, O. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Induced-charge+electro-osmosis+around+metal+and+Janus+spheres+in+water:+Patterns+of+flow+and+breaking+symmetries.">Induced-charge electro-osmosis around metal and Janus spheres in water: Patterns of flow and breaking symmetries.</a> Phys Rev E. 90 (5), 051002 (2014).</li><li>Ramos, A., Garc&#237;a-S&#225;nchez, P., Morgan, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AC+electrokinetics+of+conducting+microparticles:+A+review.">AC electrokinetics of conducting microparticles: A review.</a> Curr Opin Colloid Interface Sci. 24, 79-90 (2016).</li><li>Hong, L., Jiang, S., Granick, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+method+to+produce+Janus+colloidal+particles+in+large+quantity.">Simple method to produce Janus colloidal particles in large quantity.</a> Langmuir. 22 (23), 9495-9499 (2006).</li><li>Bhaskar, S., Hitt, J., Chang, S. W. L., Lahann, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multicompartmental+microcylinders.">Multicompartmental microcylinders.</a> Angewandte Chemie International Edition. 48 (25), 4589-4593 (2009).</li><li>Nie, Z., Li, W., Seo, M., Xu, S., Kumacheva, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Janus+and+ternary+particles+generated+by+microfluidic+synthesis:+design,+synthesis,+and+self-assembly.">Janus and ternary particles generated by microfluidic synthesis: design, synthesis, and self-assembly.</a> J Am Chem Soc. 128 (29), 9408-9412 (2006).</li><li>Jiang, H. -. R., Yoshinaga, N., Sano, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Active+motion+of+a+Janus+particle+by+self-thermophoresis+in+a+defocused+laser+beam.">Active motion of a Janus particle by self-thermophoresis in a defocused laser beam.</a> Phys Rev Lett. 105 (26), 268302 (2010).</li><li>Pawar, A. B., Kretzschmar, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multifunctional+patchy+particles+by+glancing+angle+deposition.">Multifunctional patchy particles by glancing angle deposition.</a> Langmuir. 25 (16), 9057-9063 (2009).</li><li>Garc&#237;a-S&#225;nchez, P., Ren, Y., Arcenegui, J. J., Morgan, H., Ramos, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alternating+current+electrokinetic+properties+of+gold-coated+microspheres.">Alternating current electrokinetic properties of gold-coated microspheres.</a> Langmuir. 28 (39), 13861-13870 (2012).</li><li>Ren, Y. K., Morganti, D., Jiang, H. Y., Ramos, A., Morgan, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrorotation+of+metallic+microspheres.">Electrorotation of metallic microspheres.</a> Langmuir. 27 (6), 2128-2131 (2011).</li><li>Jones, T. B., Jones, T. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Electromechanics of particles. , (2005).</li><li>Morganti, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> AC electrokinetic analysis of chemically modified microparticles. , (2012).</li><li>Morgan, H., Hughes, M. P., Green, N. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Separation+of+submicron+bioparticles+by+dielectrophoresis.">Separation of submicron bioparticles by dielectrophoresis.</a> Biophys J. 77 (1), 516-525 (1999).</li><li>Ren, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Induced-charge+electroosmotic+trapping+of+particles.">Induced-charge electroosmotic trapping of particles.</a> Lab Chip. 15 (10), 2181-2191 (2015).</li></ol>

Fabricating ITO electrode arrays using the fiber laser marking machine provides a rapid method to prepare electrodes with arbitrary patterns. However, there are still some disadvantages to this method, such as fewer charge carriers and the lower fabrication accuracy of ITO electrodes compared to metal electrodes created by traditional methods. These disadvantages could limit some experiments. For example, fewer charges carriers could affect the distribution of the electric field when there is a large distance between ele...

Janus particles, named after the Roman god with a double face, are asymmetric particles whose two sides have physically or chemically different surface properties1,2. Due to this asymmetric feature, Janus particles exhibit special responses under electric fields, such as DEP3,4,5,6, EROT2, and induced-charge electrophoresis (ICEP)7,8,9. Recently, several methods to prepare Janus particles have been reported, including the Pickering emulsion method10, the electrohydrodynamic co-jetting method11, and the microfluidic photopolymerization method12. However, these methods require a series of complicated apparatus and procedures. This article introduces a simple method to prepare Janus particles and fully coated metallic particles. A monolayer of micro-scaled silica particles is prepared in a drying process and is put into a sputtering device to be coated with Au. One hemisphere of the particle is shaded, and only the other hemisphere is coated with Au2,13. The monolayer of the Janus particle is stamped with a polydimethylsiloxane (PDMS) stamp and then treated with a second coating process to prepare fully coated metallic particles14.
To characterize the electrical properties of a Janus particle, different AC electrokinetic responses, such as DEP, EROT, and electro-orientation, are widely used9,15,16,17,18,19. For example, EROT is the steady-state rotational response of a particle under an externally imposed rotating electric field2,9,15,16. By measuring the EROT, the interaction between the induced dipole of the particles and the electric fields can be obtained. DEP, which arises from the interaction between the induced dipoles and a non-uniform electric field, is capable of leading to particle movement3,4,5,9,15. Different kinds of particles can be attracted to (positive DEP) or repelled from (negative DEP) the electrode edges, which serves as a general method for manipulating and characterizing particles in the microfluidic device. The translational (DEP) and rotational (EROT) characteristics of the particle under the electric field are dominated by the real and imaginary part of the Clausius-Mossotti (CM) factor, respectively. The CM factor depends on the electrical properties of the particles and the surrounding liquid, which are revealed from the characteristic frequency, &#969;c = 2&#963; / aCDL, of DEP and EROT, where &#963; is the liquid conductivity, a is the particle radius, and CDL is the capacitance of the electrical double layer15,16. To measure the EROT and DEP of particles, specially designed electrode array patterns are needed. Traditionally, a photolithographic technique is used to create electrode arrays and requires a series of complicated procedures, including photoresist spin-coating, mask alignment, exposure, and development15,18,19,20.
In this article, the rapid fabrication of electrode arrays is demonstrated by direct optical patterning. A transparent thin-film ITO layer, which is coated on the glass substrate, is partially removed by a fiber laser marking machine (1,064 nm, 20 W, 90 to 120 ns pulse width, and 20 to 80 kHz pulse repetition frequency) to form a four-phase electrode array. The distance between the diagonal electrodes is 150-800 &#181;m, which can be adjusted to suit the experiments. The four-phase electrode array can be used to characterize and concentrate particles in different microfluidic devices15,16,18. To generate the four-phase electric field, the electrode array is connected to a 2-channel function generator and to two invertors. The phase shift between the adjacent electrodes is set at either 90&#176; (for EROT) or 180&#176; (for DEP)15. The AC signal is applied at a 0.5 to 4 Vpp voltage amplitude, and the frequency ranges from 100 Hz to 5 MHz during the operation process. Janus particles, metallic particles, and silica particles are used as samples to measure their AC electrokinetic properties. Suspensions of the particles are placed on the center region of the electrode array and are observed under an inverted optical microscope with a 40X, NA 0.6 objective. Particle motion and rotation are recorded with a digital camera. The DEP movement is recorded at the annular region, between 40 and 65 &#181;m radially away from the array center, and EROT is recorded at the circular region, 65 &#181;m radially away from the array center. Particle velocity and angular velocity are measured by the particle-tracking method. The particle centroids are distinguished by gray scale or geometry of particles using software. The particle velocity and angular velocity are obtained by measuring the movements of the particle centroids.
This article provides a simple method to rapidly fabricate arbitrarily patterned electrode arrays. It introduces the preparation of fully or partially coated metallic particles, which can be used in different fields, with uses ranging from biology to industry applications.

<table border="0" cellpadding="0" cellspacing="0" width="768">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Silica Microsphere-2.34 &#181;m</td>
			<td style="width:187px;">Bangs Laboratories</td>
			<td style="width:129px;">SS04N</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Ethyl Alcohol (99.5%)</td>
			<td style="width:187px;">KATAYAMA CHEMICAL</td>
			<td style="width:129px;">E-0105</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:287px;">SYLGARD 184 A&#38;B Silicone Elastomer(PDMS)</td>
			<td>DOW CORNING</td>
			<td style="width:129px;"></td>
			<td>PDMS&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">&#160;ITO glass</td>
			<td style="width:187px;">Luminescence Technology</td>
			<td style="width:129px;">LT-G001</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Fiber laser marking machine</td>
			<td style="width:187px;">Taiwan 3Axle Technology</td>
			<td style="width:129px;">TAFB-R-20W</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">&#160;2-channel function generator</td>
			<td style="width:187px;">Gwinsek</td>
			<td style="width:129px;">AFG-2225</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">CMOS camera</td>
			<td style="width:187px;">Point Grey</td>
			<td style="width:129px;">GS3-U3-32S4M-C</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Sputter</td>
			<td style="width:187px;">JEOL</td>
			<td style="width:129px;">JFC-1100E</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Operational Amplifiers</td>
			<td style="width:187px;">Texas Instruments</td>
			<td style="width:129px;">LM6361N</td>
			<td>OP invertor&#160;</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:287px;">Ultrasonic Cleaner</td>
			<td style="width:187px;">Gui Lin Yiyuan Ultrasonic Machinery Co.</td>
			<td style="width:129px;">DG-1</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Microcentrifuge</td>
			<td style="width:187px;">Scientific Specialties, Inc.</td>
			<td style="width:129px;"></td>
			<td>1.5ml</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Mini Centrifuge</td>
			<td style="width:187px;">LMS</td>
			<td style="width:129px;">MC-MCF-2360</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Microscope cover glass</td>
			<td style="width:187px;">Marienfeld-Superior</td>
			<td style="width:129px;"></td>
			<td>18*18mm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Inverted optical microscope</td>
			<td style="width:187px;">Olympus</td>
			<td style="width:129px;">OX-71&#160;</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:287px;">Parafilm</td>
			<td style="width:187px;">bemis</td>
			<td style="width:129px;"></td>
			<td>spacer</td>
		</tr>
	</tbody>
</table>

preparation of janus particles and alternating current electrokinetic measurements with a rapidly fabricated indium tin oxide electrode array

This article provides a simple method to prepare partially or fully coated metallic particles and to perform the rapid fabrication of electrode arrays, which can facilitate electrical experiments in microfluidic devices. Janus particles are asymmetric particles that contain two different surface properties on their two sides. To prepare Janus particles, a monolayer of silica particles is prepared by a drying process. Gold (Au) is deposited on one side of each particle using a sputtering device. The fully coated metallic particles are completed after the second coating process. To analyze the electrical surface properties of Janus particles, alternating current (AC) electrokinetic measurements, such as dielectrophoresis (DEP) and electrorotation (EROT)- which require specifically designed electrode arrays in the experimental device- are performed. However, traditional methods to fabricate electrode arrays, such as the photolithographic technique, require a series of complicated procedures. Here, we introduce a flexible method to fabricate a designed electrode array. An indium tin oxide (ITO) glass is patterned by a fiber laser marking machine (1,064 nm, 20 W, 90 to 120 ns pulse-width, and 20 to 80 kHz pulse repetition frequency) to create a four-phase electrode array. To generate the four-phase electric field, the electrodes are connected to a 2-channel function generator and to two invertors. The phase shift between the adjacent electrodes is set at either 90&#176; (for EROT) or 180&#176; (for DEP). Representative results of AC electrokinetic measurements with a four-phase ITO electrode array are presented.

The four-phase electrode array is created by a fiber laser marking machine. The ITO conductive layer coated on the glass is removed by a focus laser to form a cross pattern with a gap of 160 &#181;m, as shown in Figure 1B.
<img alt="Figure 1" class="xfigimg" src="/files/ftp_upload/55950/55950fig1.jpg" /> 
Figure 1: Preparation of the ITO El...

Watch this Scientific Journal Video about Preparation of Janus Particles and Alternating Current Electrokinetic Measurements with a Rapidly Fabricated Indium Tin Oxide Electrode Array at JoVE.com

Preparation of Janus Particles and Alternating Current Electrokinetic Measurements with a Rapidly Fabricated Indium Tin Oxide Electrode Array

In this article, a simple method to prepare partially or fully coated metallic particles and to perform AC electrokinetic property measurements with a rapidly fabricated indium tin oxide (ITO) electrode array is demonstrated.

This article provides a simple method to prepare partially or fully coated metallic particles and to perform the rapid fabrication of electrode arrays, ...

Research

Education

JoVE Core

JoVE Journal

Electrical Engineering

Engineering

Unit 1

AC Circuit Analysis

SCIENTISTS IN ACTION

Probing and Mapping Electrode Surfaces in Solid Oxide Fuel Cells

고체 산화물 연료 전지의 전극 표면을 탐색 및 매핑

Solid oxide fuel cells (SOFCs) are potentially the most efficient and cost-effective solution to utilization of a wide variety of fuels beyond hydrogen ...

연구

공학

Development of a 3D Graphene Electrode Dielectrophoretic Device

3D 그래 핀 전극 유전 영동 장치의 개발

The design and fabrication of a novel 3D electrode microdevice using 50 &#181;m thick graphene paper and 100 &#181;m double sided tape is described. The ...

Writing and Low-Temperature Characterization of Oxide Nanostructures

작성 및 산화물 나노 구조의 저온 특성

Oxide nanoelectronics is a rapidly growing field which seeks to develop novel materials with multifunctional behavior at nanoscale dimensions.  Oxide ...

Preparation and Friction Force Microscopy Measurements of Immiscible, Opposing Polymer Brushes

고분자 브러쉬를 반대 섞이지의 준비 및 마찰 힘 현미경 측정,

Solvated polymer brushes are well known to lubricate high-pressure contacts, because they can sustain a positive normal load while maintaining low ...

Ultrasound Velocity Measurement in a Liquid Metal Electrode

액체 금속 전극의 초음파 속도 측정

A growing number of electrochemical technologies depend on fluid flow, and often that fluid is opaque. Measuring the flow of an opaque fluid is inherently ...

Surface Enhanced Raman Spectroscopy Detection of Biomolecules Using EBL Fabricated Nanostructured Substrates

표면 EBL 날조 된 나노 구조 기판을 사용하여 생체 분자의 라만 분광학 감지 강화

Fabrication and characterization of conjugate nano-biological systems interfacing metallic nanostructures on solid supports with immobilized biomolecules ...

Iridium Oxide-reduced Graphene Oxide Nanohybrid Thin Film Modified Screen-printed Electrodes as Disposable Electrochemical Paper Microfluidic pH Sensors

일회용 전기 종이 마이크로 유체의 pH 센서와 같은 이리듐 산화물 환원 그래 핀 산화물 나노 하이브리드 박막 수정 스크린 인쇄 전극

A facile, controllable, inexpensive and green electrochemical synthesis of IrO2-graphene nanohybrid thin films is developed to fabricate an easy-to-use ...

Non-aqueous Electrode Processing and Construction of Lithium-ion Coin Cells

리튬 이온 코인 셀의 비수 전극 가공 및 건설

Research into new and improved materials to be utilized in lithium-ion batteries (LIB) necessitates an experimental counterpart to any computational ...

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence

Experimental methods are presented for measuring the rotational and translational motion of anisotropic particles in turbulent fluid flows. 3D printing ...

Measurements of Soil Carbon by Neutron-Gamma Analysis in Static and Scanning Modes

측정 토양 탄소 고정 및 검색 모드에서 중성자-감마선 분석에 의해

The herein described application of the inelastic neutron scattering (INS) method for soil carbon analysis is based on the registration and analysis of ...