JoVE Logo
Faculty Resource Center

Sign In

Magnet Assisted Composite Manufacturing: A Flexible New Technique for Achieving High Consolidation Pressure in Vacuum Bag/Lay-Up Processes

DOI :

10.3791/57254-v

9:41 min

May 17th, 2018

May 17th, 2018

12,992 Views

1School of Aerospace and Mechanical Engineering, University of Oklahoma

A new technique for applying consolidation pressure on the vacuum bag lay-up to fabricate composite laminates is described. The goal of this protocol is to develop a simple, cost-effective technique to improve the quality of laminates fabricated by the wet lay-up vacuum bag method.

Tags

Magnet Assisted Composite Manufacturing

-- Views

Related Videos

article

Synthesis and Microdiffraction at Extreme Pressures and Temperatures

article

Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes

article

Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5

article

Studying Dynamic Processes of Nano-sized Objects in Liquid using Scanning Transmission Electron Microscopy

article

Wicking Tests for Unidirectional Fabrics: Measurements of Capillary Parameters to Evaluate Capillary Pressure in Liquid Composite Molding Processes

article

Experimental Implementation of a New Composite Fabrication Method: Exposing Bare Fibers on the Composite Surface by the Soft Layer Method

article

An Available Technique for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature

article

Cutting Procedures, Tensile Testing, and Ageing of Flexible Unidirectional Composite Laminates

article

Operation of the Collaborative Composite Manufacturing (CCM) System

article

Using Flexible Gold-Titanium Reaction Cells to Simulate Pressure-Dependent Microbial Activity in the Context of Subsurface Biomining

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2024 MyJoVE Corporation. All rights reserved