Name: force system with vertical v-bends: a 3d in vitro assessment of elastic and rigid rectangular archwires
Uploaded: 2018-07-24T12:30:00
Description: Watch this Scientific Journal Video about Force System with Vertical V-Bends: A 3D In Vitro Assessment of Elastic and Rigid Rectangular Archwires at JoVE.com

The authors would like to acknowledge all colleagues who made this work possible, especially Drs. Aditya Chhibber and Ravindra Nanda. The authors would like to thank the Biodynamics &#38; Bioengineering Lab at UCONN Health for the facilities provided during the development of this project.

1. Experimental Setup
<ol>
	<li>Mark the precise position for the placement of molar tubes and incisor brackets on the aluminum pegs of the OWT by using a customized &#39;jig&#39;.</li>
	<li>Bond standard self-ligating brackets with composite material. Light cure for 40 seconds.</li>
	<li>Insert a 0.021 x 0.025-inch stainless steel (SS) &#39;ovoid&#39; maxillary archwire into the bracket slots.</li>
	<li>Place the testing apparatus in the glass chamber.</li>
	<li>Check for any unintended archwire activation. Any activa...

<ol>
	<li>Burstone, C. J., Koenig, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+systems+from+an+ideal+arch.">Force systems from an ideal arch.</a> Am J Orthod. 65 (3), 270-289 (1974).</li><li>Koenig, H. A., Burstone, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+systems+from+an+ideal+arch:+Large+deflection+considerations.">Force systems from an ideal arch: Large deflection considerations.</a> Angle Orthod. 59 (1), 11-16 (1989).</li><li>Burstone, C. J., Koenig, H. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Creative+wire+bending:+The+force+system+from+step+and+V+bends.">Creative wire bending: The force system from step and V bends.</a> Am J Orthod and Dentofac Orthop. 93 (1), 59-67 (1988).</li><li>Ronay, F., Kleinert, W., Melsen, B., Burstone, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+system+developed+by+V+bends+in+an+elastic+orthodontic+wire.">Force system developed by V bends in an elastic orthodontic wire.</a> Am J Orthod and Dentofac Orthop. 96 (4), 295-301 (1989).</li><li>Demange, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Equilibrium+situations+in+bend+force+systems.">Equilibrium situations in bend force systems.</a> Am J Orthod and Dentofac Orthop. 98 (4), 333-339 (1990).</li><li>Isaacson, R. J., Lindauer, S. J., Conley, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Responses+of+3-dimensional+arch+wires+to+vertical+V+bends:+Comparisons+with+existing+2-dimensional+data+in+the+lateral+view.">Responses of 3-dimensional arch wires to vertical V bends: Comparisons with existing 2-dimensional data in the lateral view.</a> Semin Orthod. 1 (1), 57-63 (1995).</li><li>Upadhyay, M., Shah, R., Peterson, D., Takafumi, A., Yadav, S., Agarwal, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+system+generated+by+elastic+archwires+with+vertical+V+bends:+A+three-dimensional+analysis.">Force system generated by elastic archwires with vertical V bends: A three-dimensional analysis.</a> Eur J Orthod. 39 (2), 202-208 (2017).</li><li>Gurgel, J. A., Kerr, S., Powers, J. M., LeCrone, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force-deflection+properties+of+superelastic+nickel-titanium+archwires.">Force-deflection properties of superelastic nickel-titanium archwires.</a> Am J Orthod Dentofacial Orthop. 120 (4), 378-382 (2001).</li><li>Gurgel, J. A., Kerr, S., Powers, J. M., Pinzan, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Torsional+properties+of+commercial+nickel-titanium+wires+during+activation+and+deactivation.">Torsional properties of commercial nickel-titanium wires during activation and deactivation.</a> Am J Orthod Dentofacial Orthop. 120 (1), 76-79 (2001).</li><li>Hazel, R. J., Rohan, G. J., West, V. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+relaxation+in+orthodontic+arch+wires.">Force relaxation in orthodontic arch wires.</a> Am J Orthod. 86 (5), 396-402 (1984).</li><li>Lundgren, D., Owman-Moll, P., Kurol, J., Martensson, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Accuracy+of+orthodontic+force+and+tooth+movement+measurements.">Accuracy of orthodontic force and tooth movement measurements.</a> Br J Orthod. 23 (3), 241-248 (1996).</li><li>Goldberg, A. J., Burstone, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+evaluation+of+beta+titanium+alloys+for+use+in+orthodontic+appliances.">An evaluation of beta titanium alloys for use in orthodontic appliances.</a> J Dent Res. 58 (2), 593-600 (1979).</li><li>Kusy, R. P., Whitley, J. Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermal+and+mechanical+characteristics+of+stainless+steel,+titanium-molybdenum,+and+nickel+titanium+archwires.">Thermal and mechanical characteristics of stainless steel, titanium-molybdenum, and nickel titanium archwires.</a> Am J Orthod Dentofacial Orthop. 131 (2), 229-237 (2007).</li><li>Kapila, S., Sachdeva, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+properties+and+clinical+applications+of+orthodontic+wires.">Mechanical properties and clinical applications of orthodontic wires.</a> Am J Orthod Dentofacial Orthop. 96 (2), 100-109 (1989).</li><li>Verstrynge, A., Humbeeck, J. V., Willems, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In-vitro+evaluation+of+the+material+characteristics+of+stainless+steel+and+beta-titanium+orthodontic+wires.">In-vitro evaluation of the material characteristics of stainless steel and beta-titanium orthodontic wires.</a> Am J Orthod Dentofacial Orthop. 130 (4), 460-470 (2006).</li><li>Tominaga, J. Y., Tanaka, M., Koga, Y., Gonzales, C., Kobayashi, M., Yoshida, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimal+loading+conditions+for+controlled+movement+of+anterior+teeth+in+sliding+mechanics.">Optimal loading conditions for controlled movement of anterior teeth in sliding mechanics.</a> Angle. 79 (6), 1102-1107 (2009).</li><li>Cattaneo, P. M., Dalstra, M., Melsen, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+finite+element+method:+A+tool+to+study+orthodontic+tooth+movement.">The finite element method: A tool to study orthodontic tooth movement.</a> J Dent Res. 84 (5), 428-433 (2005).</li><li>Fotos, P. G., Spyrakos, C. C., Bernard, D. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Orthodontic+forces+generated+by+a+simulated+archwire+appliance+evaluated+by+the+finite+element+method.">Orthodontic forces generated by a simulated archwire appliance evaluated by the finite element method.</a> Angle Orthod. 60 (4), 277-282 (1990).</li><li>Geramy, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alveolar+bone+resorption+and+the+center+of+resistance+modification+(3-D+analysis+by+means+of+the+finite+element+method.">Alveolar bone resorption and the center of resistance modification (3-D analysis by means of the finite element method.</a> Am J Orthod Dentofacial Orthop. 117 (4), 399-405 (2000).</li></ol>

Orthodontic archwires have been studied in various ways8,9,10,11. They have also been evaluated for various mechanical properties, but they have seldom been analyzed for determining the force system they are going to create12,13,14,15. Three-point bending tests are po...

An important aspect of clinical orthodontic treatment is the knowledge of the force system produced by multibracket appliances. A clear understanding of the underlying biomechanical principles can help deliver predictable results and minimize potential side effects1. Recent years have seen a trend away from placing bends in archwires by building more activation with bracket position and design; however, comprehensive orthodontic treatment still requires placement of bends in archwires. Bends, when placed in different types and sizes of archwires, can create a wide variety of force systems suitable for different types of tooth movement. Although the force systems can become quite complex when multiple teeth are considered, a helpful starting point can involve a simple two-bracket system.
To date, V-bend mechanics have primarily been analyzed in the second order only, utilizing mathematical models1,2,3,4,5 and/or computer-based analysis/simulations6. This has yielded a basic understanding of the force system involved in the second order interaction of the arch wires with adjacent brackets (Figure 1). However, these methods impose certain boundary conditions in order to run&#160;simulations that might not hold true in actual clinical situations and deviations might occur. Recently, a new in vitro model involving force transducers was proposed for measuring three dimensional (3D) forces and moments created by evaluating not only second order archwire-bracket interactions but also in the third order7. However, the effect of different types of archwires on the force system at various bend positions along the incisor molar archwire span was not evaluated. Also, the study only involved evaluation of elastic orthodontic archwires, which are not the primary archwires on which tooth movement occurs. Therefore, the aim of this study was to evaluate the force system created by the placement of a V-bend at different locations in rectangular stainless steel and beta-titanium archwires in a 3D set up involving the molar and incisor brackets. Clinicians need to know the force system applied on the dentition when a specific combination of archwire bracket combination is used to fix a malocclusion.
The described technique has been developed to study the orthodontic force system in all the three planes of space, mimicking clinical reality. It is to be understood that it is extremely difficult to measure the force system clinically; therefore, such measurements have to be carried out&#160;in vitro. It is assumed that the force system created by a V-bend in the laboratory would be similar if replicated in the patient&#39;s mouth. A workflow was created to evaluate how the experimental set up has to be configured (Figure 2).
The orthodontic wire tester (OWT) is an innovative product developed by Division of Orthodontics in collaboration with the Bioengineering &#38; Biodynamics Laboratory, UConn Health, Farmington, CT, USA (Figure 3). It is designed to accurately mimic the arrangement of the maxillary teeth within the mouth and some intra-oral conditions while providing measurements of the force system created in all the three planes of space. The major mechanical components of the OWT are a Data acquisition device (DAQ), nano Force/Torque Sensors, humidity sensors, temperature sensors, and a personal computer. The testing apparatus is placed in a glass enclosure having temperature/humidity controls. This allows for partial simulation of the intraoral environment. The DAQ serves as the interface for the three sensors:&#160;humidity sensor, force/moment sensor,&#160;thermistor&#160;and the testing apparatus with the sensors situated on a platform&#160;(Figure 3). These are linked to a software program. The software is a platform and a development environment for visual programming and is used to control different types of hardware. It was chosen to automate the orthodontic wire tester.
A series of aluminum pegs are arranged on the testing apparatus to represent the teeth of the maxillary dental arch. Two of the pegs representing the right central incisor and right first molar are connected to sensors/load cells (S1 and S2). A load cell is a mechanical device that can measure the forces and moments applied to it in all the three planes (x-y-z): Fx, Fy, and Fz; and Mx, My, and Mz. The pegs are systematically positioned to create a dental arch form. Each peg is separated from the other by a precisely recorded measurement that is calculated using average tooth widths as observed in patients undergoing orthodontic treatment. The shape chosen for the experiment is an &#39;ovoid&#39; arch form created from a standardized template.

<table border="0" cellpadding="0" cellspacing="0" style="width:1011px;" width="1011">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:248px;">Force/Torque&#160; Sensors/Transducers</td>
			<td style="width:488px;">Nano17 F/T Sensors,&#160; ATI Industrial Automation, Apex, NC, USA</td>
			<td style="width:115px;"></td>
			<td style="width:160px;">Part of the OWT</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">CHS Series Humidity&#160; Sensor Units</td>
			<td>&#160; TDK Corporation</td>
			<td></td>
			<td>Part of the OWT</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Temperature sensors</td>
			<td>(Murata NTSDXH103FPB30 thermistor) Murata Manufacturing Co., Ltd</td>
			<td></td>
			<td>Part of the OWT</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">LabVIEW 7.1.&#160;</td>
			<td>Laboratory Virtual Instrumentation Engineering Workbench, Version 7.1</td>
			<td></td>
			<td>Software Program</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Self-Ligating brackets&#160;</td>
			<td>Empower Series, American Orthodontics.</td>
			<td></td>
			<td>Orthodontic Brackets</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Stainless steel archwires</td>
			<td>Ultimate Wireforms, Inc. in Bristol, CT</td>
			<td></td>
			<td>Archwires</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Beta-Titanium Archwires</td>
			<td>Ultimate Wireforms, Inc. in Bristol, CT</td>
			<td></td>
			<td>Archwires</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Data acquisition device (DAQ)</td>
			<td>National Instruments (NI) USB 6210</td>
			<td></td>
			<td>Part of the OWT</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Ortho Form III (Archform template)</td>
			<td>3M Oral Care, St. Paul, MN, USA</td>
			<td></td>
			<td>Ovoid arch form</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Weingart Plier</td>
			<td>Hu-Friedy Mfg. Co., LLC Chicago, IL</td>
			<td></td>
			<td>Orthodontic Plier</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Light wire Plier</td>
			<td>Hu-Friedy Mfg. Co., LLC Chicago, IL</td>
			<td></td>
			<td>Orthodontic Plier</td>
		</tr>
	</tbody>
</table>

force system with vertical v-bends: a 3d in vitro assessment of elastic and rigid rectangular archwires

A proper understanding of the force system created by various orthodontic appliances can make treatment of patients efficient and predictable. Reducing the complicated multi-bracket appliances to a simple two-bracket system for the purpose of force system evaluation will be the first step in this direction. However, much of the orthodontic biomechanics in this regard is confined to 2D experimental studies, computer modeling/analysis or theoretical extrapolation of existing models. The objective of this protocol is to design, construct and validate an in vitro 3D model capable of measuring the forces and moments generated by an archwire with a V-bend placed between two brackets. Additional objectives are to compare the force system generated by different types of archwires among themselves and to previous models. For this purpose, a 2 x 4 appliance representing a molar and an incisor has been simulated. An orthodontic wire tester (OWT) is constructed consisting of two multi-axis force transducers or load cells (nanosensors) to which the orthodontic brackets are attached. The load cells are capable of measuring the force system in all the three planes of space. Two types of archwires, stainless-steel and beta-titanium of three different sizes (0.016 x 0.022 inch, 0.017 x 0.025 inch and 0.019 x 0.025 inch), are tested. Each wire receives a single vertical V-bend systematically placed at a specific position with a predefined angle. Similar V-bends are replicated on different archwires at 11 different locations between the molar and incisor attachments. This is the first time an attempt has been made in vitro to simulate an orthodontic appliance utilizing V-bends on different archwires.

The total force and total moment experienced by each sensor at the center of the sensor plate are represented by their three orthogonal components: Fx, Fy, and Fz representing the forces along the x-axis, y-axis, and z-axis, respectively; and Mx, My, and Mz representing the moments around the same axes. The initial measurements at the sensors are converted mathematically to the force and moment values experienced by the bra...

Watch this Scientific Journal Video about Force System with Vertical V-Bends: A 3D In Vitro Assessment of Elastic and Rigid Rectangular Archwires at JoVE.com

Force System with Vertical V-Bends: A 3D In Vitro Assessment of Elastic and Rigid Rectangular Archwires

The method presented here is designed to construct and validate an in vitro 3D model capable of measuring the force system generated by different archwires with V-bends placed between two brackets. Additional objectives are to compare this force system with different types of archwires and to previous models.

Force System with Vertical V-Bends: A 3D In Vitro Assessment of Elastic and Rigid Rectangular Archwires

A proper understanding of the force system created by various orthodontic appliances can make treatment of patients efficient and predictable. Reducing ...

Research

Education

JoVE Core

JoVE Journal

Mechanical Engineering

Bioengineering

Unit 1

Force System Resultants

SCIENTISTS IN ACTION

Tissue Engineering of a Human 3D in vitro Tumor Test System

Tissue Engineering of a Human 3D in vitro Tumor Test System

인간의 3 차원의 조직 공학<em&gt; 시험관</em&gt; 종양 테스트 시스템

Cancer is one of the leading causes of death worldwide.  Current therapeutic strategies are predominantly developed in 2D culture  systems, which ...

연구

생체공학

Investigating Receptor-ligand Systems of the Cellulosome with AFM-based Single-molecule Force Spectroscopy

Cellulosomes are discrete multienzyme complexes used by a subset of anaerobic bacteria and fungi to digest lignocellulosic substrates. Assembly of the ...

Planar Gradient Diffusion System to Investigate Chemotaxis in a 3D Collagen Matrix

평면 그라데이션 확산 시스템은 3D 콜라겐 매트릭스에 화성을 조사하기 위해

The importance of cell migration can be seen through the development of human life. When cells migrate, they generate forces and transfer these forces to ...

Eye Irritation Test (EIT) for Hazard Identification of Eye Irritating Chemicals using Reconstructed Human Cornea-like Epithelial (RhCE) Tissue Model

Eye Irritation Test EIT for Hazard Identification of Eye Irritating Chemicals using Reconstructed Human Cornea-like Epithelial RhCE Tissue Model

복원 된 인간의 각막 모양의 상피 (RHCE) 조직 모델을 사용하여 눈에 자극성 화학 물질의 위험 식별을위한 눈 자극 시험 (EIT)

To comply with the Seventh Amendment to the EU Cosmetics Directive and EU REACH legislation, validated non-animal alternative methods for reliable and ...

Improving 2D and 3D Skin In Vitro Models Using Macromolecular Crowding

Improving 2D and 3D Skin In Vitro Models Using Macromolecular Crowding

개선 2D 및 3D 스킨<em&gt; 체외</em거대 분자의 크라우 딩 사용&gt; 모델

The glycoprotein family of collagens represents the main structural proteins in the human body, and are key components of biomaterials used in modern ...

Improved 3D Hydrogel Cultures of Primary Glial Cells for In Vitro Modelling of Neuroinflammation

Improved 3D Hydrogel Cultures of Primary Glial Cells for In Vitro Modelling of Neuroinflammation

생체 외에서 Neuroinflammation의 모델링에 대 한 기본 Glial 세포의 3 차원 하이드로 겔 문화 개선

In the central nervous system, numerous acute injuries and neurodegenerative disorders, as well as implanted devices or biomaterials engineered to enhance ...

Rigid Embedding of Fixed and Stained, Whole, Millimeter-Scale Specimens for Section-free 3D Histology by Micro-Computed Tomography

엄밀한 포함의 고정 및 스테인드, 전체, 마이크로 단층에 의해 섹션-무료 3D 조직학에 대 한 밀리미터 단위 표본

For over a hundred years, the histological study of tissues has been the gold standard for medical diagnosis because histology allows all cell types in ...

Construction of a Multilayered Mesenchymal Stem Cell Sheet with a 3D Dynamic Culture System

3 차원 동적 문화 시스템과 다층된 중간 엽 줄기 세포 시트의 건설

Stem cell therapy shows a promising future in regenerating injured organ and tissues, and the cell sheet technique has been developed to improve the low ...

A Human 3D Extracellular Matrix-Adipocyte Culture Model for Studying Matrix-Cell Metabolic Crosstalk

매트릭스 세포 대사 크로스토크 연구를 위한 인간 3D 세포외 세포외 매트릭스-세포세포 배양 모델

The extracellular matrix (ECM) plays a central role in regulating tissue homeostasis, engaging in crosstalk with cells and regulating multiple aspects of ...

Advanced 3D Liver Models for In vitro Genotoxicity Testing Following Long-Term Nanomaterial Exposure

장기 나노 물질 노출 다음 체외 물질 독성 테스트를 위한 고급 3D 간 모델

Due to the rapid development and implementation of a diverse array of engineered nanomaterials (ENM), exposure to ENM is inevitable and the development of ...