Name: retroductal nanoparticle injection to the murine submandibular gland
Uploaded: 2018-05-03T14:15:00
Description: Watch this Scientific Journal Video about Retroductal Nanoparticle Injection to the Murine Submandibular Gland at JoVE.com

Recherche rapporté dans cette publication a été financée par le National Institute of Dental et recherche Craniofacial (NIDCR) et le National Cancer Institute (NCI) de la National Institutes of Health, sous attribution numéro R56 DE025098 et UG3 DE027695 F30 CA206296. Le contenu est la seule responsabilité des auteurs et ne représente pas nécessairement l’opinion officielle de la National Institutes of Health. Ce travail a été également soutenu par la NSF DMR 1206219 et de l’Innovation de l’AIRD en Oral Care Award (2016).
Nous tenons à remercier Jayne Gavrity pour son aide dans des expériences d’IVIS. Nous tenons à remercier Karen Bentley pour son entrée et l’assistance dans l’exercice de EM. Nous tenons à remercier Weng Pei-Lun pour son aide avec IHC. Nous tenons à remercier Matthew Ingalls pour son aide dans la préparation de la figure. Nous tenons à remercier le Dr Elaine Smolock et Emily Wu pour une lecture critique de ce manuscrit.

Toutes les procédures en vivo décrites ci-dessous ont été approuvés par le Comité Université sur les ressources animales à l’Université de Rochester, Rochester, NY.
1. préparation
<ol><li>Utilisez un tuyau de 32G cathéter intracrânienne avec incrustation de fil, couper 3 cm du tube pour former une extrémité biseautée, environ 45° à l’axe longitudinal. Confirmer que le fil soit au moins 1 cm de plus que le tube.</li>
	<li>Charge 50 µL de solution de nanoparticul...

<ol>
	<li>Miranda-Rius, J., Brunet-Llobet, L., Lahor-Soler, E., Farre, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Salivary+Secretory+Disorders,+Inducing+Drugs,+and+Clinical+Management.">Salivary Secretory Disorders, Inducing Drugs, and Clinical Management.</a> International Journal Of Medical Sciences. 12 (10), 811-824 (2015).</li><li>Acauan, M. D., Figueiredo, M. A. Z., Cherubini, K., Gomes, A. P. N., Salum, F. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radiotherapy-induced+salivary+dysfunction:+Structural+changes,+pathogenetic+mechanisms+and+therapies.">Radiotherapy-induced salivary dysfunction: Structural changes, pathogenetic mechanisms and therapies.</a> Archives of Oral Biology. 60 (12), 1802-1810 (2015).</li><li>Dirix, P., Nuyts, S., Vander Poorten, V., Delaere, P., Van den Bogaert, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+influence+of+xerostomia+after+radiotherapy+on+quality+of+life.">The influence of xerostomia after radiotherapy on quality of life.</a> Supportive Care in Cancer. 16 (2), 171-179 (2008).</li><li>Vissink, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Clinical+management+of+salivary+gland+hypofunction+and+xerostomia+in+head-and-neck+cancer+patients:+successes+and+barriers.">Clinical management of salivary gland hypofunction and xerostomia in head-and-neck cancer patients: successes and barriers.</a> International Journal of Radiation Oncology Biology Physics. 78 (4), 983-991 (2010).</li><li>Delporte, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Increased+fluid+secretion+after+adenoviral-mediated+transfer+of+the+aquaporin-1+cDNA+to+irradiated+rat+salivary+glands.">Increased fluid secretion after adenoviral-mediated transfer of the aquaporin-1 cDNA to irradiated rat salivary glands.</a> Proceedings of the National Academy of Sciences. 94 (7), 3268-3273 (1997).</li><li>Samuni, Y., Baum, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Gene+delivery+in+salivary+glands:+from+the+bench+to+the+clinic.">Gene delivery in salivary glands: from the bench to the clinic.</a> Biochimica et Biophysica Acta. 1812 (11), 1515-1521 (2011).</li><li>Beahm, D. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Surgical+approaches+to+the+submandibular+gland:+A+review+of+literature.">Surgical approaches to the submandibular gland: A review of literature.</a> International Journal of Surgery. 7 (6), 503-509 (2009).</li><li>Zheng, C., Shinomiya, T., Goldsmith, C. M., Di Pasquale, G., Baum, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Convenient+and+reproducible+in+vivo+gene+transfer+to+mouse+parotid+glands.">Convenient and reproducible in vivo gene transfer to mouse parotid glands.</a> Oral diseases. 17 (1), 77-82 (2011).</li><li>Zheng, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prevention+of+Radiation-Induced+Salivary+Hypofunction+Following+hKGF+Gene+Delivery+to+Murine+Submandibular+Glands.">Prevention of Radiation-Induced Salivary Hypofunction Following hKGF Gene Delivery to Murine Submandibular Glands.</a> Clinical Cancer Research. 17 (9), 2842-2851 (2011).</li><li>Okazaki, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Acceleration+of+rat+salivary+gland+tissue+repair+by+basic+fibroblast+growth+factor.">Acceleration of rat salivary gland tissue repair by basic fibroblast growth factor.</a> Archives of Oral Biology. 45 (10), 911-919 (2000).</li><li>Arany, S., Benoit, D. S., Dewhurst, S., Ovitt, C. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoparticle-mediated+gene+silencing+confers+radioprotection+to+salivary+glands+in+vivo.">Nanoparticle-mediated gene silencing confers radioprotection to salivary glands in vivo.</a> Molecular Therapy. 21 (6), 1182-1194 (2013).</li><li>Cotrim, A. P., Sowers, A., Mitchell, J. B., Baum, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Prevention+of+irradiation-induced+salivary+hypofunction+by+microvessel+protection+in+mouse+salivary+glands.">Prevention of irradiation-induced salivary hypofunction by microvessel protection in mouse salivary glands.</a> Molecular Therapy. 15 (12), 2101-2106 (2007).</li><li>Redman, R. S., Ball, W. D., Mezey, E., Key, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dispersed+donor+salivary+gland+cells+are+widely+distributed+in+the+recipient+gland+when+infused+up+the+ductal+tree.">Dispersed donor salivary gland cells are widely distributed in the recipient gland when infused up the ductal tree.</a> Biotechnic &amp; Histochemistry. 84 (6), 253-260 (2009).</li><li>Grundmann, O., Fillinger, J. L., Victory, K. R., Burd, R., Limesand, K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Restoration+of+radiation+therapy-induced+salivary+gland+dysfunction+in+mice+by+post+therapy+IGF-1+administration.">Restoration of radiation therapy-induced salivary gland dysfunction in mice by post therapy IGF-1 administration.</a> BMC Cancer. 10, 417-417 (2010).</li><li>Limesand, K. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Insulin-Like+Growth+Factor-1+Preserves+Salivary+Gland+Function+After+Fractionated+Radiation.">Insulin-Like Growth Factor-1 Preserves Salivary Gland Function After Fractionated Radiation.</a> International Journal of Radiation Oncology Biology Physics. 78 (2), 579-586 (2010).</li><li>Marmary, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Radiation-induced+loss+of+salivary+gland+function+is+driven+by+cellular+senescence+and+prevented+by+IL-6+modulation.">Radiation-induced loss of salivary gland function is driven by cellular senescence and prevented by IL-6 modulation.</a> Cancer Research. , (2016).</li><li>Baum, B. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Early+responses+to+adenoviral-mediated+transfer+of+the+aquaporin-1+cDNA+for+radiation-induced+salivary+hypofunction.">Early responses to adenoviral-mediated transfer of the aquaporin-1 cDNA for radiation-induced salivary hypofunction.</a> Proceedings of the National Academy of Sciences of the United States of America. 109 (47), 19403-19407 (2012).</li><li>Arany, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pro-apoptotic+gene+knockdown+mediated+by+nanocomplexed+siRNA+reduces+radiation+damage+in+primary+salivary+gland+cultures.">Pro-apoptotic gene knockdown mediated by nanocomplexed siRNA reduces radiation damage in primary salivary gland cultures.</a> Journal of Cellular Biochemistry. 113 (6), 1955-1965 (2012).</li><li>Benoit, D. S. W., Henry, S. M., Shubin, A. D., Hoffman, A. S., Stayton, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=pH-responsive+polymeric+siRNA+carriers+sensitize+multidrug+resistant+ovarian+cancer+cells+to+doxorubicin+via+knockdown+of+polo-like+kinase+1.">pH-responsive polymeric siRNA carriers sensitize multidrug resistant ovarian cancer cells to doxorubicin via knockdown of polo-like kinase 1.</a> Molecular pharmaceutics. 7 (2), 442-455 (2010).</li><li>Malcolm, D. W., Varghese, J. J., Sorrells, J. E., Ovitt, C. E., Benoit, D. S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Effects+of+Biological+Fluids+on+Colloidal+Stability+and+siRNA+Delivery+of+a+pH-Responsive+Micellar+Nanoparticle+Delivery+System.">The Effects of Biological Fluids on Colloidal Stability and siRNA Delivery of a pH-Responsive Micellar Nanoparticle Delivery System.</a> ACS Nano. , (2017).</li><li>Baranello, M. P., Bauer, L., Benoit, D. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Poly(styrene-alt-maleic+anhydride)-based+diblock+copolymer+micelles+exhibit+versatile+hydrophobic+drug+loading,+drug-dependent+release,+and+internalization+by+multidrug+resistant+ovarian+cancer+cells.">Poly(styrene-alt-maleic anhydride)-based diblock copolymer micelles exhibit versatile hydrophobic drug loading, drug-dependent release, and internalization by multidrug resistant ovarian cancer cells.</a> Biomacromolecules. 15 (7), 2629-2641 (2014).</li><li>Wang, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fracture-Targeted+Delivery+of+&#946;-Catenin+Agonists+via+Peptide-Functionalized+Nanoparticles+Augments+Fracture+Healing.">Fracture-Targeted Delivery of &#946;-Catenin Agonists via Peptide-Functionalized Nanoparticles Augments Fracture Healing.</a> ACS Nano. 11 (9), 9445-9458 (2017).</li><li>Baranello, M. P., Bauer, L., Jordan, C. T., Benoit, D. S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Micelle+Delivery+of+Parthenolide+to+Acute+Myeloid+Leukemia+Cells.">Micelle Delivery of Parthenolide to Acute Myeloid Leukemia Cells.</a> Cellular and Molecular Bioengineering. 8 (3), 455-470 (2015).</li><li>Kuriki, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cannulation+of+the+Mouse+Submandibular+Salivary+Gland+via+the+Wharton's+Duct.">Cannulation of the Mouse Submandibular Salivary Gland via the Wharton's Duct.</a> Journal of Visualized Experiments. (51), e3074 (2011).</li><li>Nair, R. P., Zheng, C., Sunavala-Dossabhoy, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Retroductal+Submandibular+Gland+Instillation+and+Localized+Fractionated+Irradiation+in+a+Rat+Model+of+Salivary+Hypofunction.">Retroductal Submandibular Gland Instillation and Localized Fractionated Irradiation in a Rat Model of Salivary Hypofunction.</a> Journal of Visualized Experiments. (110), (2016).</li><li>Wang, Y., Malcolm, D. W., Benoit, D. S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlled+and+sustained+delivery+of+siRNA/NPs+from+hydrogels+expedites+bone+fracture+healing.">Controlled and sustained delivery of siRNA/NPs from hydrogels expedites bone fracture healing.</a> Biomaterials. 139 (Supplement C), 127-138 (2017).</li><li>Hoffman, M. D., Van Hove, A. H., Benoit, D. S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Degradable+hydrogels+for+spatiotemporal+control+of+mesenchymal+stem+cells+localized+at+decellularized+bone+allografts.">Degradable hydrogels for spatiotemporal control of mesenchymal stem cells localized at decellularized bone allografts.</a> Acta Biomaterialia. 10 (8), 3431-3441 (2014).</li><li>Nguyen, C. Q., Yin, H., Lee, B. H., Chiorini, J. A., Peck, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=IL17:+potential+therapeutic+target+in+Sjogren's+syndrome+using+adenovirus-mediated+gene+transfer.">IL17: potential therapeutic target in Sjogren's syndrome using adenovirus-mediated gene transfer.</a> Laboratory Investigation. 91 (1), 54-62 (2011).</li></ol>

Retroductal injection est critique pour la livraison de drogue localisé à la glande salivaire. Cette technique possède des applications dans le dépistage des agents thérapeutiques pour les conditions, y compris le syndrome de Sjögren et RIH9,10,28. Administration des médicaments directement dans le SMG par injection retroductal fournit un avantage clé sur une administration systémique dans son potentiel à réduire les ...

Dysfonctionnement des glandes salivaires a plusieurs étiologies, y compris le syndrome de Sjögren, une perte de médiation auto-immune du tissu sécréteur fonctionnel et rayonnement induit hypoptyalisme (RIH), une commune séquelle de radiothérapie du cancer tête et du cou1. Perte de fonction salivaire en raison ou l’autre condition prédispose les individus à infections buccodentaires et systémiques, la carie, dysfonction digestive et déglutition, trouble de la parole et dépression majeure1,2,3. En conséquence, qualité de vie souffre considérablement, avec des interventions limitées à la palliation des symptômes plutôt que de guérir4. Afin d’étudier de nouveaux traitements en vivo, il est intéressant d’administrer les composés bioactifs directement à la glande salivaire.
Retroductal injection est une méthode utile pour livrer des composés bioactifs directement vers les glandes salivaires et de tester l’efficacité dans les maladies, blessures, ou en vertu de l’homéostasie tissulaire normale. Les trois glandes salivaires principales sont la glande parotide (PG), la sous-maxillaire (SMG) et la sublinguale (SLG), tous de quel vide dans la cavité buccale par l’intermédiaire de conduits excréteurs. L’anatomie de la murine SMG permet un accès direct par le biais de canulation du canal de Wharton, situé dans le plancher de la bouche sous la langue5. Après la canulation, solvatés médicaments peuvent être administrés directement à la SMG. Suite retroductal livraison, diffusion extra glandulaire est restreinte par la capsule de tissu environnant qui régit l’échange de documents avec entourant les structures6. Le SMG et sa gaine sont structurés de la même façon chez les humains et sont systématiquement accessibles au cours de la SMG chirurgie et sialoendoscopy7. Chez les humains et les souris, le PG est également accessible par l’intermédiaire de Sténon dans la muqueuse buccale8.
Dans les modèles murins de RIH, injection retroductal SMG a été utilisée pour livrer des produits thérapeutiques, y compris les facteurs de croissance, les cellules primaires, vecteurs viraux, cytokines et composés antioxydants pour moduler la réponse cellulaire à l’injure et réduire le les tissus des dommages5,9,10,11,12,13,14,15,16. Le plus notable succès clinique de retroductal injection est l’administration d’un vecteur adénoviral pour diriger l’expression d’un canal d’eau (aquaporine 1 ; AQP1) chez les patients ayant le rayonnement pour la tête et du cou, cancer du17.
Auparavant, nous avons développé et démontré l’efficacité d’un système de nanoparticules polymériques-siARN retroductally injecté pour protéger la glande salivaire de RIH11,18,19,20. Ici, dans le prolongement de nos travaux antérieurs, nous démontrons notre protocole pour l’injection de SMG retroductal à l’aide d’une NANOPARTICULE fluorescent étiquetée (NP) capable de charger et livrer autrement peu solubles médicaments21,22, 23.
Nous avons synthétisé la NP d’un copolymère à deux blocs de poly (styrène-alt-maléique anhydride)-b-poly(styrene) (LMFP) par le biais de polymérisation de fragmentation (RAFT) chaîne addition réversible, comme décrit plus haut21. Grâce à l’échange de solvant, ces polymères spontanément s’auto-assembler en structures NP micelle avec un hydrophobe intérieur et hydrophile extérieur21. Les NPs sont étiquetés avec un fluorophore Texas-rouge pour permettre la vérification de la livraison de NP dans les glandes sans pour autant sacrifier l’animal. Vivre l’imagerie animale et immunohistochimie SMG est affiché à 1 h et 1 jour après l’injection.
Cette mise à jour et protocole reproductible canulation devrait permettre à d’autres réaliser l’injection de retroductal. Gageons que cette technique raffinée deviendra critique pour des études in vivo et développement thérapeutiques24,25.

<table border="0" cellpadding="0" cellspacing="0" width="690">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Pilocarpine hydrochloride</td>
			<td style="width:128px;">Sigma Aldrich</td>
			<td style="width:119px;">P6503</td>
			<td style="width:225px;">Pilocarpine</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Student Vannas Spring Scissors</td>
			<td style="width:128px;">Fine Science Tools</td>
			<td style="width:119px;">91500-9</td>
			<td>Spring Scissors for Tracheostomy</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Sterile Saline Solution</td>
			<td style="width:128px;">Medline</td>
			<td style="width:119px;">RDI30296H</td>
			<td>Saline</td>
		</tr>
		<tr height="19">
			<td height="19" style="height:19px;width:219px;">Dumont #7 Forceps</td>
			<td style="width:128px;">Fine Science Tools</td>
			<td style="width:119px;">11274-20</td>
			<td>Curved Forceps</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:219px;">Dumont #5 Forceps</td>
			<td style="width:128px;">Fine Science Tools</td>
			<td style="width:119px;">11251-10</td>
			<td>Straight Forceps</td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;width:219px;">Standard Pattern Forceps</td>
			<td style="width:128px;">Fine Science Tools</td>
			<td style="width:119px;">11000-12</td>
			<td>Blunt Forceps</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Fine Scissors- Tungsten Carbide</td>
			<td style="width:128px;">Fine Science Tools</td>
			<td style="width:119px;">14568-09</td>
			<td>Dissection Scissors</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:219px;">Microhematocrit Heparinized Capillary Tubes</td>
			<td style="width:128px;">Fisher Scientific</td>
			<td style="width:119px;">22362566</td>
			<td>Capillary tubes</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Lubricant Eye Ointment</td>
			<td style="width:128px;">Refresh</td>
			<td style="width:119px;">N/A</td>
			<td>Refresh Lacri-Lube</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:219px;">Goat polyclonal anti-Nkcc1</td>
			<td style="width:128px;">Santa Cruz Biotech</td>
			<td style="width:119px;">SC-21545</td>
			<td>Nkcc1 Antibody</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:219px;">DAPI (4&#39;,6-Diamidino-2-Phenylindole, Dihydrochloride)</td>
			<td style="width:128px;">Thermo Fisher Scientific</td>
			<td style="width:119px;">D1306</td>
			<td>DAPI</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">GraphPad Prism</td>
			<td style="width:128px;">GraphPad</td>
			<td style="width:119px;">ver6.0</td>
			<td>Statistical Software</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:219px;">Cotton tipped applicator</td>
			<td style="width:128px;">Medline</td>
			<td style="width:119px;">MDS202000</td>
			<td>Applicator for eye ointment</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:219px;">0.5cc Insulin Syringe, 29G x 1/2&#34;</td>
			<td style="width:128px;">BD</td>
			<td style="width:119px;">7629</td>
			<td>Syringe for intraperitoneal injection</td>
		</tr>
	</tbody>
</table>

retroductal nanoparticle injection to the murine submandibular gland

Deux objectifs communs de la glande salivaire thérapeutique sont la prévention et le traitement des dysfonctions tissulaires suivant une auto-immunes ou rayonnements des blessures. En fournissant localement des composés bioactifs vers les glandes salivaires, teneurs plus élevées en tissu peuvent être réalisées en toute sécurité par rapport à l’administration systémique. En outre, hors tissu cible peuvent être réduites considérablement les effets d’extra glandulaire accumulation de matière. À cet égard, l’injection de retroductal est une méthode largement utilisée pour l’étude des glandes salivaires biologie et la physiopathologie. Retroductal administration de facteurs de croissance, les cellules primaires, vecteurs viraux et médicaments à petites molécules a été démontrée à l’appui de la glande dans le cadre de la blessure. Nous avons déjà montré l’efficacité d’une stratégie de nanoparticules-siARN retroductally injecté pour maintenir la fonction de la glande après irradiation. Ici, une méthode très efficace et reproductible pour administrer des nanomatériaux pour la glande submandibulaire murine par canal de Wharton est détaillée (Figure 1). Nous décrivons accéder à la cavité buccale et décrivent les étapes nécessaires au canal de Wharton cannulate, outre les observations servant de contrôles qualité tout au long de la procédure.

Retroductal injection peut être utilisée pour administrer NPs à la SMG murin (Figure 1). Ici, nous livrons 50 µg LMFP NPs étiqueté avec Texas Red fluorophore.
Positionnement correct de la souris permet l’accès facile et visualisation du plancher de la bouche (Figure 2 a-B). Les papilles sous-maxillaires sont identifiées comme deux protubéranc...

Watch this Scientific Journal Video about Retroductal Nanoparticle Injection to the Murine Submandibular Gland at JoVE.com

Retroductal Nanoparticle Injection to the Murine Submandibular Gland

Locaux de médicaments vers les glandes sous-maxillaires est intéressant en biologie de glande salivaire de compréhension et pour le développement de nouvelles thérapeutiques. Nous présentons un protocole d’injection retroductal mise à jour et détaillées, destiné à améliorer la précision de livraison et de la reproductibilité expérimentale. L’application présentée ici est la livraison de nanoparticules polymériques.

Injection de nanoparticules de Retroductal à la glande submandibulaire Murine

Two common goals of salivary gland therapeutics are prevention and cure of tissue dysfunction following either autoimmune or radiation injury. By locally ...

The overall goal of this procedure is to administer nanomaterials directly to the murine submandibular gland. The main advantage of this technique is that it achieves direct delivery of compounds to the submandibular gland while bypassing the systemic circulation. The implications of this technique extend toward therapy of salivary gland disfunction following radiation treatment for head and neck malignancy.Generally, individuals new to this method may be challenged by locating and cannulating the submandibular duct while the animal is sedated. To begin this procedure, cut three centimeters of a 32 gauge intracranial catheter tubing with wire inset to form a beveled end approximately 45 degrees to the long axis. Confirm that the wire is at least one centimeter longer than the tubing.Creating a beveled edge to the tubing will ease ductal cannulation. If the tubing gets bent during the procedure, a fresh beveled edge should be cut. Next, load 50 microliters of PSMA nanoparticle solution or other injection material into a Hamilton syringe.To reduce the probability of burrow trauma during injection, attach the catheter tubing to the syringe and expel dead volume. Inspect the injection solution to ensure the nanoparticle is fully solvated to prevent ductal obstruction. Then prepare atropine solution at 0.1 milligram per milliliter.To visualize the ductal entry point, place an anesthetized mouse in the prone position on a custom stage. Then apply ointment to the eyes to prevent dryness during the procedure. Afterward, secure the maxillary incisors over a metal beam and use an elastic band to apply downward tension behind the mandibular incisors.Align the mouse beneath the dissecting microscope to visualize the base of the jaw. To widen the mouth, use a custom curved steel retractor to apply tension to the buccal mucosa bilaterally. To visualize the submandibular papilla, grasp and gently lift the tongue from the floor of the mouth using blunt forceps.Place a piece of cotton between the tongue and the buccal mucosa to enable further manipulation within the oral cavity. To perform ductal cannulation and line placement, grasp the catheter tubing with a wire inset. For optimum manual control during cannulation, align the tubing with the curvature of the forceps.Using the dissecting microscope, move the forceps and wire into the field of view. Using the wire inset, gently apply pressure into the base of one submandibular papilla to produce a small superficial mucosal puncture that will facilitate later entry of the catheter tubing. If resistance is encountered, cut fresh beveled tips on both the tubing and wire inset with sharp dissecting scissors.Following the entry, withdraw the stylet, then, using the dissecting microscope, confirm the presence of saliva at the puncture site. Subsequently, retract the stylet further within the tubing. Avoid forceful or sudden movement of the stylet that may cause bleeding or compromise ductal integrity.To ensure that injection tubing will fit into the Wharton's duct opening, insert tubing containing the stylet as a rigid guide into the previously made puncture. To prevent back pressure from prolonged to ductal obstruction, withdraw the tubing. Under the microscope, ensure that an opening can be seen in the submandibular papilla.If visible bleeding occurs, remove the stylet and reattempt the procedures on the opposing submandibular papilla. Next, without moving the mouse, administer one milligram per kilogram atropine solution intraperitoneally to reduce elevation during the procedure. Then, wait for five to 10 minutes.Under the dissecting microscope, insert the syringe tubing into the orifice. If resistance is encountered, cut a fresh beveled end on the tubing and reattempt it. Once the tubing is in place within the submandibular papilla, slowly advance three to five millimeters into the duct.Then, release the tubing from the forceps. To improve the seal between the tubing and the submandibular papilla, dry the interface by gently blotting with gauze for one minute. Inspect to confirm that the position of the tubing has not shifted during drying.In this procedure, inject the material at a rate of 10 microliters per minute. Ensure that the mouse remains sedated and is not showing signs of distress. Following the injection, maintain syringe pressure for five minutes to improve the retention of material within the Wharton's duct and the submandibular gland.Inspect the submandibular papilla periodically to ensure that tubing does not exit the ductal orifice. Maintaining injection pressure will enhance the effectiveness of retroductal delivery. Using fine forceps, grasp and gently and withdraw the tubing from the submandibular papilla.Remove the retractor and cotton from the oral cavity before moving the mouse away from the stage. To verify nanoparticle delivery, in vivo imaging system shows the lateralization of red fluorescent signal to the treated side of the mouse one hour post injection. And this image shows that the nanoparticle signal has decreased significantly 24 hours after injection.To confirm nanoparticle persistence in the submandibular glands 24 hours following injection, they were sectioned and viewed by fluorescent imaging. Shown here are the uninjected control submandibular glands stained for aquaporin 5 and keritin five marking the secretory acini and ductal cells respectively. In retroductal nanoparticle injected submandibular glands, aquaporin five and keritin five stains show normal gland morphology and nanoparticles taken up in both acini and ducts.Once mastered this technique can be done in 20 minutes if it is performed properly. While attempting this procedure, it's important to remember to avoid any extraneous movements that could dislodge the cannula or disrupt the seal made between the tubing and the submandibular papilla. Following the procedure, other methods like immunostaining, RNA extraction, or flow cytometry can be performed in order to evaluate gene expression or nanomaterial localization in the submandibular gland.After its development, this technique paved the way for salivary gland researchers to screen and test compounds for xerostomia prevention. After watching this video, you should have a good understanding of how to administer nanomaterials directly to the murine submandibular gland via cannulation of Wharton's duct.

retroductal-nanoparticle-injection-to-the-murine-submandibular-gland

Research

JoVE Journal

Bioengineering

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic valve leaflets are composed of interstitial cells suspended within an extracellular matrix (ECM) and are lined with an endothelial cell monolayer. The valve withstands a harsh, dynamic environment and is constantly exposed to shear, flexion, tension, and compression. Research has shown calcific lesions in diseased valves occur in areas of high mechanical stress as a result of endothelial disruption or interstitial matrix damage1-3. Hence, it is not surprising that epidemiological studies have shown high blood pressure to be a leading risk factor in the onset of aortic valve disease4. 
The only treatment option currently available for valve disease is surgical replacement of the diseased valve with a bioprosthetic or mechanical valve5. Improved understanding of valve biology in response to physical stresses would help elucidate the mechanisms of valve pathogenesis. In turn, this could help in the development of non-invasive therapies such as pharmaceutical intervention or prevention. Several bioreactors have been previously developed to study the mechanobiology of native or engineered heart valves6-9. Pulsatile bioreactors have also been developed to study a range of tissues including cartilage10, bone11 and bladder12. The aim of this work was to develop a cyclic pressure system that could be used to elucidate the biological response of aortic valve leaflets to increased pressure loads. 
The system consisted of an acrylic chamber in which to place samples and produce cyclic pressure, viton diaphragm solenoid valves to control the timing of the pressure cycle, and a computer to control electrical devices. The pressure was monitored using a pressure transducer, and the signal was conditioned using a load cell conditioner. A LabVIEW program regulated the pressure using an analog device to pump compressed air into the system at the appropriate rate. The system mimicked the dynamic transvalvular pressure levels associated with the aortic valve; a saw tooth wave produced a gradual increase in pressure, typical of the transvalvular pressure gradient that is present across the valve during diastole, followed by a sharp pressure drop depicting valve opening in systole. The LabVIEW program allowed users to control the magnitude and frequency of cyclic pressure. The system was able to subject tissue samples to physiological and pathological pressure conditions. This device can be used to increase our understanding of how heart valves respond to changes in the local mechanical environment.

Design of a Cyclic Pressure Bioreactor for the Ex Vivo Study of Aortic Heart Valves

A cyclic pressure bioreactor capable of subjecting heart valve tissue to physiological and pathological pressure conditions has been designed. A LabVIEW program allows users to control pressure magnitude, amplitude and frequency. This device can be used to study the mechanobiology of heart valve tissue or isolated cells.

Conception d&#39;un bioréacteur pour la pression cyclique Ex Vivo Étude des valves cardiaques aortiques

The aortic valve, located between the left ventricle and the aorta, allows for unidirectional blood flow, preventing backflow into the ventricle. Aortic ...

Recherche

Bio-ingénierie

Synthesis, Assembly, and Characterization of Monolayer Protected Gold Nanoparticle Films for Protein Monolayer Electrochemistry

Colloidal gold nanoparticles protected with alkanethiolate ligands called monolayer protected gold clusters (MPCs) are synthesized and subsequently incorporated into film assemblies that serve as adsorption platforms for protein monolayer electrochemistry (PME). PME is utilized as the model system for studying electrochemical properties of redox proteins by confining them to an adsorption platform at a modified electrode, which also serves as a redox partner for electron transfer (ET) reactions. Studies have shown that gold nanoparticle film assemblies of this nature provide for a more homogeneous protein adsorption environment and promote ET without distance dependence compared to the more traditional systems modified with alkanethiol self-assembled monolayers (SAM).1-3 In this paper, MPCs functionalized with hexanethiolate ligands are synthesized using a modified Brust reaction4 and characterized with ultraviolet visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), and proton (1H) nuclear magnetic resonance (NMR). MPC films are assembled on SAM modified gold electrode interfaces by using a "dip cycle" method of alternating MPC layers and dithiol linking molecules. Film growth at gold electrode is tracked electrochemically by measuring changes to the double layer charging current of the system. Analogous films assembled on silane modified glass slides allow for optical monitoring of film growth and cross-sectional TEM analysis provides an estimated film thickness. During film assembly, manipulation of the MPC ligand protection as well as the interparticle linkage mechanism allow for networked films, that are readily adaptable, to interface with redox protein having different adsorption mechanism. For example, Pseudomonas aeruginosa azurin (AZ) can be adsorbed hydrophobically to dithiol-linked films of hexanethiolate MPCs and cytochrome c (cyt c) can be immobilized electrostatically at a carboxylic acid modified MPC interfacial layer. In this report, we focus on the film protocol for the AZ system exclusively. Investigations involving the adsorption of proteins on MPC modified synthetic platforms could further the understanding of interactions between biomolecules and man-made materials, and consequently aid the development of biosensor schemes, ET modeling systems, and synthetic biocompatible materials.5-8

Alkanethiolate stabilized gold colloids known as monolayer protected clusters (MPCs) are synthesized, characterized, and assembled into thin films as an adsorption interface for protein monolayer electrochemistry of simple redox protein like Pseudomonas aeruginosa azurin (AZ) and cytochrome c (cyt c).

Synthèse, l&#39;Assemblée, et caractérisation des nanoparticules Monocouche protégées Films d&#39;or pour Electrochimie monocouche de protéines

Colloidal gold nanoparticles protected with alkanethiolate ligands called monolayer protected gold clusters (MPCs) are synthesized and subsequently ...

A Hormone-responsive 3D Culture Model of the Human Mammary Gland Epithelium

The process of mammary epithelial morphogenesis is influenced by hormones. The study of hormone action on the breast epithelium using 2D cultures is limited to cell proliferation and gene expression endpoints. However, in the organism, mammary morphogenesis occurs in a 3D environment. 3D culture systems help bridge the gap between monolayer cell culture (2D) and the complexity of the organism. Herein, we describe a 3D culture model of the human breast epithelium that is suitable to study hormone action. It uses the commercially available hormone-responsive human breast epithelial cell line, T47D, and rat tail collagen type 1 as a matrix. This 3D culture model responds to the main mammotropic hormones: estradiol, progestins and prolactin. The influence of these hormones on epithelial morphogenesis can be observed after 1- or 2-week treatment according to the endpoint. The 3D cultures can be harvested for analysis of epithelial morphogenesis, cell proliferation and gene expression.

We describe a 3D culture model of the human breast epithelium that is suitable to study hormone action.

Un modèle 3D Culture hormone-sensibles de la glande mammaire humaine épithélium

The process of mammary epithelial morphogenesis is influenced by hormones. The study of hormone action on the breast epithelium using 2D cultures is ...

Determination of Zeta Potential via Nanoparticle Translocation Velocities through a Tunable Nanopore: Using DNA-modified Particles as an Example

Nanopore technologies, known collectively as Resistive Pulse Sensors (RPS), are being used to detect, quantify and characterize proteins, molecules and nanoparticles. Tunable resistive pulse sensing (TRPS) is a relatively recent adaptation to RPS that incorporates a tunable pore that can be altered in real time. Here, we use TRPS to monitor the translocation times of DNA-modified nanoparticles as they traverse the tunable pore membrane as a function of DNA concentration and structure (i.e., single-stranded to double-stranded DNA).
TRPS is based on two Ag/AgCl electrodes, separated by an elastomeric pore membrane that establishes a stable ionic current upon an applied electric field. Unlike various optical-based particle characterization technologies, TRPS can characterize individual particles amongst a sample population, allowing for multimodal samples to be analyzed with ease. Here, we demonstrate zeta potential measurements via particle translocation velocities of known standards and apply these to sample analyte translocation times, thus resulting in measuring the zeta potential of those analytes.
As well as acquiring mean zeta potential values, the samples are all measured using a particle-by-particle perspective exhibiting more information on a given sample through sample population distributions, for example. Of such, this method demonstrates potential within sensing applications for both medical and environmental fields.

Here we use a polyurethane tunable nanopore integrated into a resistive pulse sensing technique to characterize nanoparticles surface chemistry via the measurement of particle translocation velocities, which can be used to determine the zeta potential of individual nanoparticles.

Détermination du potentiel Zeta via nanoparticulaires translocation Velocities à travers un accordable Nanopore: Utilisation de particules d&#39;ADN modifié comme un exemple

Nanopore technologies, known collectively as Resistive Pulse Sensors (RPS), are being used to detect, quantify and characterize proteins, molecules and ...

Intraductal Delivery to the Rabbit Mammary Gland

Localized intraductal treatments for breast cancer offer potential advantages, including efficient delivery to the tumor and reduced systemic toxicity and adverse effects1,2,3,4,5,6,7. However, several challenges remain before these treatments can be applied more widely. The development and validation of intraductal therapeutics in an appropriate animal model facilitate the development of intraductal therapeutic strategies for patients. While the mouse mammary gland has been widely used as a model system of mammary development and tumorigenesis, the anatomy is distinct from the human gland. A larger animal model, such as the rabbit, may serve as a better model for mammary gland structure and intraductal therapeutic development. In contrast to mice, in which ten ductal trees are spatially distributed along the body axis, each terminating in a separate teat, the rabbit mammary gland more closely resembles the human gland, with multiple overlapping ductal systems that exit through separate openings in one teat. Here, we present minimally invasive methods for the delivery of reagents directly into the rabbit mammary duct and for visualization of the delivery itself with high-resolution ultrasound imaging.

Here, we describe a technique for the localized delivery of reagents to the rabbit mammary gland via an intraductal injection. In addition, we describe a protocol for visualization and the confirmation of delivery by high-resolution ultrasound imaging of contrast agents.

Livraison Intracanalaire le lapin glande mammaire

Localized intraductal treatments for breast cancer offer potential advantages, including efficient delivery to the tumor and reduced systemic toxicity and ...

An Integrated System to Remotely Trigger Intracellular Signal Transduction by Upconversion Nanoparticle-mediated Kinase Photoactivation

Upconversion nanoparticle (UCNP)-mediated photoactivation is a new approach to remotely control bioeffectors with much less phototoxicity and with deeper tissue penetration. However, the existing instrumentation on the market is not readily compatible with upconversion application. Therefore, modifying the commercially available instrument is essential for this research. In this paper, we first illustrate the modifications of a conventional fluorimeter and fluorescence microscope to make them compatible for photon upconversion experiments. We then describe the synthesis of a near-infrared (NIR)-triggered caged protein kinase A catalytic subunit (PKA) immobilized on a UCNP complex. Parameters for microinjection and NIR photoactivation procedures are also reported. After the caged PKA-UCNP is microinjected into REF52 fibroblast cells, the NIR irradiation, which is significantly superior to conventional UV irradiation, efficiently triggers the PKA signal transduction pathway in living cells. In addition, positive and negative control experiments confirm that the PKA-induced pathway leading to the disintegration of stress fibers is specifically triggered by NIR irradiation. Thus, the use of protein-modified UCNP provides an innovative approach to remotely control light-modulated cellular experiments, in which direct exposure to UV light must be avoided.

In this protocol, caged protein kinase A (PKA), a cellular signal transduction bioeffector, was immobilized on a nanoparticle surface, microinjected into the cytosol, and activated by the upconverted UV light from near-infrared (NIR) irradiation, inducing downstream stress fiber disintegration in the cytosol.

Un système intégré pour déclencher à distance Transduction de signaux intracellulaires par Photoactivation Kinase induite par l’Upconversion Nanoparticle

Upconversion nanoparticle (UCNP)-mediated photoactivation is a new approach to remotely control bioeffectors with much less phototoxicity and with deeper ...

Light-sheet Fluorescence Microscopy for the Study of the Murine Heart

Light-sheet fluorescence microscopy has been widely used for rapid image acquisition with a high axial resolution from micrometer to millimeter scale. Traditional light-sheet techniques involve the use of a single illumination beam directed orthogonally at sample tissue. Images of large samples that are produced using a single illumination beam contain stripes or artifacts and suffer from a reduced resolution due to the scattering and absorption of light by the tissue. This study uses a dual-sided illumination beam and a simplified CLARITY optical clearing technique for the murine heart. These techniques allow for deeper imaging by removing lipids from the heart and produce a large field of imaging, greater than 10 x 10 x 10 mm3. As a result, this strategy enables us to quantify the ventricular dimensions, track the cardiac lineage, and localize the spatial distribution of cardiac-specific proteins and ion-channels from the post-natal to adult mouse hearts with sufficient contrast and resolution.

This study uses a dual-sided illumination light-sheet fluorescence microscopy (LSFM) technique combined with optical clearing to study the murine heart.

Microscopie de Fluorescence lumière-feuille pour l’étude du coeur murin

Light-sheet fluorescence microscopy has been widely used for rapid image acquisition with a high axial resolution from micrometer to millimeter scale. ...

Lipidico Injection Protocol for Serial Crystallography Measurements at the Australian Synchrotron

A facility for performing serial crystallography measurements has been developed at the Australian synchrotron. This facility incorporates a purpose built high viscous injector, Lipidico, as part of the macromolecular crystallography (MX2) beamline to measure large numbers of small crystals at room temperature. The goal of this technique is to enable crystals to be grown/transferred to&#160;glass syringes to be used directly in the injector for serial crystallography data collection. The advantages of this injector include the ability to respond rapidly&#160;to changes in the flow rate without interruption of the stream. Several limitations for this high viscosity injector (HVI) exist which include a restriction on the allowed sample viscosities to &#62;10 Pa.s. Stream stability can also potentially be an issue depending on the specific properties of the sample. A detailed protocol for how to set up samples and operate the injector for serial crystallography measurements at the Australian synchrotron is presented here. The method demonstrates preparation of the sample, including the transfer of lysozyme crystals into a high viscous media (silicone grease), and the operation of the injector for data collection at MX2.

The goal of this protocol is to demonstrate how to prepare serial crystallography samples for data collection on a high viscous injector, Lipidico, recently commissioned at the Australian synchrotron.

Protocole d’injection lipidique pour les mesures de cristallographie en série au synchrotron australien

A facility for performing serial crystallography measurements has been developed at the Australian synchrotron. This facility incorporates a purpose built ...

Transplantation of a 3D Bioprinted Patch in a Murine Model of Myocardial Infarction

Testing regenerative properties of 3D bioprinted cardiac patches in vivo using murine models of heart failure via permanent left anterior descending (LAD) ligation is a challenging procedure and has a high mortality rate due to its nature. We developed a method to consistently transplant bioprinted patches of cells and hydrogels onto the epicardium of an infarcted mouse heart to test their regenerative properties in a robust and feasible way. First, a deeply anesthetized mouse is carefully intubated and ventilated. Following left lateral thoracotomy (surgical opening of the chest), the exposed LAD is permanently ligated and the bioprinted patch transplanted onto the epicardium. The mouse quickly recovers from the procedure after chest closure. The advantages of this robust and quick approach include a predicted 28-day mortality rate of up to 30% (lower than the 44% reported by other studies using a similar model of permanent LAD ligation in mice). Moreover, the approach described in this protocol is versatile and could be adapted to test bioprinted patches using different cell types or hydrogels where high numbers of animals are needed to optimally power studies. Overall, we present this as an advantageous approach which may change preclinical testing in future studies for the field of cardiac regeneration and tissue engineering.

This protocol aims to transplant a 3D bioprinted patch onto the epicardium of infarcted mice modeling heart failure. It includes details regarding anesthesia, the surgical chest opening, permanent ligation of the left anterior descending (LAD) coronary artery and application of a bioprinted patch onto the infarcted area of the heart.

Transplantation d’un patch bioimprimé 3D dans un modèle murine d’infarctus du myocarde

Testing regenerative properties of 3D bioprinted cardiac patches in vivo using murine models of heart failure via permanent left anterior descending (LAD) ...

Improving Reproducibility to Meet Minimal Information for Studies of Extracellular Vesicles 2018 Guidelines in Nanoparticle Tracking Analysis

Nanoparticle tracking analysis (NTA) has been one of several characterization methods used for extracellular vesicle (EV) research since 2006. Many consider that NTA instruments and their software packages can be easily utilized following minimal training and that size calibration is feasible in-house. As both NTA acquisition and software analysis constitute EV characterization, they are addressed in Minimal Information for Studies of Extracellular Vesicles 2018 (MISEV2018). In addition, they have been monitored by Transparent Reporting and Centralizing Knowledge in Extracellular Vesicle Research (EV-TRACK) to improve the robustness of EV experiments (e.g., minimize experimental variation due to uncontrolled factors).
Despite efforts to encourage the reporting of methods and controls, many published research papers fail to report critical settings needed to reproduce the original NTA observations. Few papers report the NTA characterization of negative controls or diluents, evidently assuming that commercially available products, such as phosphate-buffered saline or ultrapure distilled water, are particulate-free. Similarly, positive controls or size standards are seldom reported by researchers to verify particle sizing. The Stokes-Einstein equation incorporates sample viscosity and temperature variables to determine particle displacement. Reporting the stable laser chamber temperature during the entire sample video collection is, therefore, an essential control measure for accurate replication. The filtration of samples or diluents is also not routinely reported, and if so, the specifics of the filter (manufacturer, membrane material, pore size) and storage conditions are seldom included. The International Society for Extracellular Vesicle (ISEV)&#39;s minimal standards of acceptable experimental detail should include a well-documented NTA protocol for the characterization of EVs. The following experiment provides evidence that an NTA analysis protocol needs to be established by the individual researcher and included in the methods of publications that use NTA characterization as one of the options to fulfill MISEV2018 requirements for single vesicle characterization.

Nanoparticle tracking analysis (NTA) is a widely used method to characterize extracellular vesicles. This paper highlights NTA experimental parameters and controls plus a uniform method of analysis and characterization of samples and diluents necessary to supplement the guidelines proposed by MISEV2018 and EV-TRACK for reproducibility between laboratories.

Améliorer la reproductibilité pour répondre aux informations minimales pour les études sur les vésicules extracellulaires 2018 Lignes directrices dans l’analyse de suivi des nanoparticules

Nanoparticle tracking analysis (NTA) has been one of several characterization methods used for extracellular vesicle (EV) research since 2006. Many ...