Name: fabricating reactive surfaces with brush-like and crosslinked films of azlactone-functionalized block co-polymers
Uploaded: 2018-06-30T13:00:00
Description: Watch this Scientific Journal Video about Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers at JoVE.com

这项研究得到了堪萨斯州立大学的支持。这项研究的一部分是在纳米材料科学中心进行的, 这是由科学用户设施司、美国能源部、能源科学办公室主办的橡树岭国家实验室。

1. 飞碟乙PVDMA 合成20
<ol><li>飞碟宏链转移剂的合成 (宏 CTA)<ol>
<li>使用250毫升的圆底反应ﬂask 装有聚四氟乙烯涂层的磁力搅拌棒。</li>
		<li>将14.2 克甲基丙烯酸缩水甘油 (142.18 克/摩尔) 与490.8 毫克2氰基-2-丙基月桂 trithiocarbonate (CPDT) (346.63 克/摩尔) 相结合, 和87.7 毫克的 2,2′-偶 (4-甲氧基 24-二甲基 valeronitrile) (V-70) (308.43 克/摩尔) (摩尔比 CPDT: V-70 =5:1), 和苯 (100 毫升) 的空气自...

本文提出了三种模式飞碟 PVDMA 的方法, 每个都有其优点和缺点。派瑞林升力法是一种通用的方法, 用于图形块共聚合体在微到纳米尺度的分辨率, 并已作为一个沉积面具在其他模式系统33,34,35。由于其表面附着力相对较弱, 在聚合物涂层后的溶剂中超声波可以很容易地从表面上去除派瑞林模具, 从而暴露出背景区域。背景?...

开发制造技术, 允许对化学和生物表面功能进行广泛和精确的控制, 对于各种应用, 从捕捉环境污染物到下一代的发展都是可取的。生物传感器, 植入物和组织工程设备1,2。功能高分子是通过 "嫁接" 或 "嫁接到" 技术3来调节表面性能的优良材料。这些方法允许控制的表面反应性的基础上的化学功能的单体和分子量的聚合物4,5,6。Azlactone 聚合物在这一背景下受到了强烈的研究, 因为 Azlactone 组在开环反应中有不同亲核试剂的快速耦合。这包括主要胺, 醇, 硫醇和肼组, 从而提供了一个多功能的路线进一步表面功能化7,8。Azlactone 聚合物薄膜已被应用于不同的环境和生物应用, 包括分析物捕获9,10, 细胞培养6,11, 和防污/防粘涂料12。在许多生物应用中, azlactone 聚合物薄膜在纳米到千分尺长度尺度上是可取的, 有利于空间控制分子呈现, 细胞相互作用, 或调节表面相互作用13, 14,15,16,17,18。因此, 应开发制造方法, 以提供高模式均匀性和良好的控制膜厚度, 而不损害化学功能19。
最近, Lokitz 开发了一种飞碟-b-PVDMA 嵌段共聚物, 能够操纵表面反应性。飞碟块对氧化-轴承表面, 产生高和可调谐的表面密度的 azlactone 组20。以前报告的模式, 这种聚合物的创建 biofunctional 接口使用传统的自上而下的光刻方法, 产生的非均匀聚合物薄膜的背景区域污染残留光刻胶材料, 造成高水平的非特异性化学和生物相互作用21、22、23。在这里, 试图钝化背景区域引起交叉反应与 azlactone 组, 损害聚合物反应性。考虑到这些限制, 我们最近开发了用于图案刷 (~ 90 nm) 或高度交联 (~ 1-10 微米) 的飞碟-PVDMA 薄膜的技术, 使其在化学或生物惰性的背景下完全保留化学聚合物的功能24。这些方法利用派瑞林升降、接口定向组装 (IDA) 和自定义微接触打印 (μCP) 技术。本文以书面和视频格式介绍了这些模式方法的高度详细的实验方法, 以及与每种技术相关的关键胶片特征和挑战和限制。

<table>
	<tbody>
		<tr>
			<td>Material</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Ethanol, &#8805; 99.5%</td>
			<td>Sigma-Aldrich</td>
			<td>459844</td>
			<td>-</td>
		</tr>
		<tr>
			<td>HCL, 1.019 N in H2O</td>
			<td>Fluka Analytical</td>
			<td>318949</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Acetone, &#8805; 99.5%</td>
			<td>Sigma-Aldrich</td>
			<td>320110</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Benzene, &#8805; 99.9%</td>
			<td>Sigma-Aldrich</td>
			<td>270709</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Isopropanol, ACS reagent, &#8805;99.5%</td>
			<td>Sigma-Aldrich</td>
			<td>190764</td>
			<td></td>
		</tr>
		<tr>
			<td>Hexane</td>
			<td>Fisher Chemical</td>
			<td>H292-4</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Argon</td>
			<td>Matheson Gas</td>
			<td>G1901175</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Tetrahydrofuran (THF), &#8805; 99.9%</td>
			<td>Sigma-Aldrich</td>
			<td>401757</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Pluronic F-127</td>
			<td>Sigma-Aldrich</td>
			<td>P2443</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Polydimethyl Siloxane (PDMS) Slygard 184</td>
			<td>Dow Corning</td>
			<td>4019862</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Trichloro (1H,1H,2H,2H-perfluorooctyl) silane (TPS), 97%</td>
			<td>Sigma-Aldrich</td>
			<td>448931</td>
			<td>It is toxic. Work with it under hood</td>
		</tr>
		<tr>
			<td>Anhydrous Chloroform, &#8805; 99%</td>
			<td>Sigma-Aldrich</td>
			<td>372978</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Positive Photoresist AZ1512</td>
			<td>MicroChemicals</td>
			<td>AZ 1512</td>
			<td>amber-red liquid, density 1.083 g/cm3, spin coating step should be done under the hood</td>
		</tr>
		<tr>
			<td>Developer AZ 300 MIF</td>
			<td>MicroChemicals</td>
			<td>AZ300 MIF</td>
			<td>clear colourless liquid with slight amine odor and density of 1 g/cm3</td>
		</tr>
		<tr>
			<td>1,2-Vinyl-4,4- dimethyl azlactone (VDMA)</td>
			<td>Isochem North America, LLC</td>
			<td>VDMA</td>
			<td>-</td>
		</tr>
		<tr>
			<td>2-cyano-2-propyl dodecyl trithiocarbonate (CPDT)</td>
			<td>Sigma-Aldrich</td>
			<td>723037</td>
			<td>-</td>
		</tr>
		<tr>
			<td>2,2&#8242;-Azobis (4methoxy-2,4-dimethyl valeronitrile) (V-70)</td>
			<td>Wako Specialty Chemicals</td>
			<td>CAS NO. 15545-97-8, EINECS No. 239-593-8</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Parylene N</td>
			<td>Specialty Coating Systems</td>
			<td>15B10004</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Name</td>
			<td>Company</td>
			<td>Catalog Number</td>
			<td>Comments</td>
		</tr>
		<tr>
			<td>Equipment</td>
			<td></td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Parylene Coater</td>
			<td>Specialty Coating Systems</td>
			<td>SCS Labcoater (PDS 2010)</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Mask alignment system</td>
			<td>Neutronix Quintel</td>
			<td>NXQ8000</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Oxygen Plasma Etcher</td>
			<td>Oxford Instruments</td>
			<td>Plasma Lab System 100</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Surface Profilometer</td>
			<td>Veeco</td>
			<td>Dektak 150</td>
			<td>Scan type was standard hill. Scan duration and force were 120 s and 1 mg, respectively.</td>
		</tr>
		<tr>
			<td>Brightfield Upright Microscope</td>
			<td>Olympus Corporation</td>
			<td>BX51</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Oxygen Plasma&#160; Cleaner</td>
			<td>Harrick Plasma</td>
			<td>PDC-001-HP</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR)</td>
			<td>Perkin Elmer</td>
			<td>ATR-FTIR 100</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Atomic Force Microscopy (AFM)</td>
			<td>PicoPlus</td>
			<td>Picoplus atomic force microscope</td>
			<td>Veeco MLCT-E cantilevers with a 0.5 N/m spring constant. Scan speeds varied between 0.25 and 1 Hz.</td>
		</tr>
		<tr>
			<td>Scanning Electron Microscopy (SEM)</td>
			<td>Hitachi Science Systems Ltd., Tokyo, Japan</td>
			<td>-</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Rotary Tool Workstation</td>
			<td>Dremel</td>
			<td>Model 220-01</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Spin Coater</td>
			<td>Smart Coater</td>
			<td>SC100</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Vacuum Oven</td>
			<td>Yamato Scientific Co.</td>
			<td>PCD-C6(5)000)</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Size Exclusion Chromatography (SEC)</td>
			<td>Waters Alliance 2695 Separations Module</td>
			<td>720004547EN</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Refractive Index (RI) detector</td>
			<td>Waters</td>
			<td>Model 2414</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Photodiode Array Detector</td>
			<td>Waters</td>
			<td>Model 2996, 716001286</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Multi-angle Light Scattering (MALS) Detector</td>
			<td>Wyatt Technology</td>
			<td>miniDAWN TREOS II</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Viscometer</td>
			<td>Wyatt Technology</td>
			<td>Viscostar</td>
			<td>-</td>
		</tr>
		<tr>
			<td>PLgel 5 &#181;m mixed-C columns (300 x 7.5 mm)</td>
			<td>Agilent</td>
			<td>5 &#181;m mixed-C columns</td>
			<td>-</td>
		</tr>
		<tr>
			<td>Ellipsometer</td>
			<td>J. A. Woollam</td>
			<td>alpha-SE</td>
			<td>Cauchy model, PGMA and PVDMA layers had refractive indices of 1.50 and 1.52 at 632 nm</td>
		</tr>
		<tr>
			<td>Ultrasonic Sonicator</td>
			<td>Fischer Scientific</td>
			<td>FS-110H</td>
			<td>-</td>
		</tr>
	</tbody>
</table>

fabricating reactive surfaces with brush-like and crosslinked films of azlactone-functionalized block co-polymers

本文介绍了利用 azlactone 基块共聚合物、聚 (甲基丙烯酸缩水甘油)-块状聚 (乙烯二甲基 azlactone) (飞碟bPVDMA) 生成新表面的制备方法。由于 azlactone 基团对胺、硫醇和羟基基团的高反应性, 飞碟-bPVDMA 表面可以通过二次分子进行修饰, 从而为各种应用创造化学或生物功能化界面。以前的飞碟-b-PVDMA 界面的报告使用了传统的自上而下的模式技术, 产生不均匀的薄膜和控制不善的背景化学。在这里, 我们描述了定制的模式技术, 使高均匀的飞碟bPVDMA 薄膜在化学惰性或具有分子的性质的背景下精确沉积。重要的是, 这些方法旨在以一种完全保留 azlactone 功能的方式, 通过每个处理步骤来存放飞碟-bPVDMA 薄膜。图案化的薄膜显示了与聚合物刷子 (90 nm) 或高度交联结构 (~ 1-10 微米) 相对应的良好控制厚度。画笔图案是使用派瑞林升力或接口定向装配方法生成的, 它对于通过调整飞碟-bPVDMA 模式密度或VDMA 块的长度。相比之下, 厚, 交联的飞碟-PVDMA 模式是通过定制的微接触印刷技术, 并提供了较高的加载或捕获二次材料由于较高的表面积, 体积比。讨论了各制造方法的详细实验步骤、关键胶片特征和故障排除指南。

接触角测量可用于评价硅与飞碟-PVDMA 的功能化。图 1描述了不同加工步骤中硅基板的接触角。等离子清洗硅基板的亲水性行为如图 1B所示。聚合物自旋涂层和退火后的接触角是 75° 1°(图 1C) , 它与 Lokitz等PVDMA 表面20所报告的值一致。
<p class="jove_content" fo:keep-togethe...

Watch this Scientific Journal Video about Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers at JoVE.com

Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers

报道了 azlactone 块共聚合物纳米厚刷或微米厚、交联膜的表面制备方法。讨论了关键的实验步骤、代表性结果和每个方法的局限性。这些方法对于创建具有定制物理特性和可调谐表面反应性的功能接口非常有用。

Azlactone 功能块共聚物的刷状和交联膜制备反应表面

In this paper, fabrication methods that generate novel surfaces using the azlactone-based block co-polymer, poly (glycidyl methacrylate)-block-poly (vinyl ...

Research

JoVE Journal

Engineering

Fabricating Metamaterials Using the Fiber Drawing Method

制造超材料使用光纤拉丝法

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe ...

科研

工程学

Probing and Mapping Electrode Surfaces in Solid Oxide Fuel Cells

在固体氧化物燃料电池电极表面的探测和测绘

Solid oxide fuel cells (SOFCs) are potentially the most efficient and cost-effective solution to utilization of a wide variety of fuels beyond hydrogen ...

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

制备纳米设计的脉冲激光沉积透明导电氧化物

Nanosecond Pulsed  Laser Deposition (PLD) in the presence of a background gas allows the deposition  of metal oxides with tunable morphology, structure, ...

Monolayer Contact Doping of Silicon Surfaces and Nanowires Using Organophosphorus Compounds

Monolayer Contact Doping (MLCD) is a simple method for doping of surfaces and nanostructures1. MLCD results in the formation of highly controlled, ultra ...

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

Electrospray Deposition of Uniform Thickness Ge23Sb7S70 and As40S60 Chalcogenide Glass Films

厚度均匀葛电沉积<sub&gt; 23</sub&gt;锑<sub&gt; 7</sub&gt;取值<sub&gt; 70</sub&gt;和As<sub&gt; 40</sub&gt;取值<sub&gt; 60</sub&gt;硫系玻璃薄膜

Solution-based electrospray film deposition, which is compatible with continuous, roll-to-roll processing, is applied to chalcogenide glasses. Two ...

Pool-Boiling Heat-Transfer Enhancement on Cylindrical Surfaces with Hybrid Wettable Patterns

在圆柱面池沸腾传热强化与混合可湿性模式

In this study, pool-boiling heat-transfer experiments were performed to investigate the effect of the number of interlines and the orientation of the ...

Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

用斜角沉积法制备高吸收介质的超薄彩色薄膜

Ultra-thin film structures have been studied extensively for use as optical coatings, but performance and fabrication challenges remain.&#160; We present ...

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications

防结冰用超疏水性金属表面的制备

Several ways to produce superhydrophobic metal surfaces are presented in this work. Aluminum was chosen as the metal substrate due to its wide use in ...

Scalable Stamp Printing and Fabrication of Hemiwicking Surfaces

可缩放邮票印刷及不堪砌面的制作

Hemiwicking is a process where a fluid wets a patterned surface beyond its normal wetting length due to a combination of capillary action and imbibition. ...

Plasma-Assisted Molecular Beam Epitaxy Growth of Mg3N2 and Zn3N2 Thin Films

Plasma-Assisted Molecular Beam Epitaxy Growth of Mg3N2 and Zn3N2 Thin Films

Mg3N2和 Zn3N2薄膜的等离子辅助分子束外延生长

This article describes a procedure for growing Mg3N2 and Zn3N2 films by plasma-assisted molecular beam epitaxy (MBE). The films are grown on 100 oriented ...