Name: application of design aspects in uniaxial loading machine development
Uploaded: 2018-09-19T14:00:00
Description: Watch this Scientific Journal Video about Application of Design Aspects in Uniaxial Loading Machine Development at JoVE.com

This work was supported by the National Institutes Health NIDCR [DE022664].

NOTE: The finished device is shown in Figure 2. The device enables pure uniaxial testing of specimens in a horizontal position.
1. Component Parts
<ol>
	<li>Prepare two programmable actuators with a 30 mm (1.2 in) travel per actuator capable of spanning 60 mm (2.3 in) when programmed to pull/push together. To accommodate a variety of potential uses, select actuators having a reasonable force capacity [67 N (15 lb)], peak thrust [58 N (13 lb)], speed resolution [...

<ol>
	<li>. ASTM E4-16. Standard practices for force verification of testing machines Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2016)</li><li>. ASTM E2309/E2309M-16. Standard practices for verification of displacement measuring systems and devices used in materials testing machines Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2016)</li><li>. ASTM E2428-15a. Standard practice for calibration and verification of torque transducers Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2015)</li><li>. ASTM E2624-17. Standard practice for torque calibration of testing machines Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2017)</li><li>. ASTM C39 &#8211; Standard test method for compressive strength of cylindrical concrete specimens Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2018)</li><li>. ASTM A370-17a. Standard test methods and definitions for mechanical testing of steel products Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2017)</li><li>. ASTM D4761-13. Standard test methods for mechanical properties of lumber and wood-base structural material Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2013)</li><li>Green, M. L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanical+properties+of+cheese,+cheese+analogues+and+protein+gels+in+relation+to+composition+and+microstructure.">Mechanical properties of cheese, cheese analogues and protein gels in relation to composition and microstructure.</a> Food Structure. 5 (1), 169-192 (1986).</li><li>. ASTM D76/D76M-11. Standard specification for tensile testing machines for textiles Available from: <a target="_blank" href="https://www.astm.org/Standard/standards-and-publications.html">https://www.astm.org/Standard/standards-and-publications.html</a> (2011)</li><li>Papini, M., Zdero, R., Schemitsch, E. H., Zalzal, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+biomechanics+of+human+femurs+in+axial+and+torsional+loading:+comparison+of+finite+element+analysis,+human+cadaveric+femurs,+and+synthetic+femurs.">The biomechanics of human femurs in axial and torsional loading: comparison of finite element analysis, human cadaveric femurs, and synthetic femurs.</a> Journal of Biomechanical Engineering. 129 (1), 12-19 (2007).</li><li>Poulet, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intermittent+applied+mechanical+loading+induces+subchondral+bone+thickening+that+may+be+intensified+locally+by+contiguous+articular+cartilage+lesions.">Intermittent applied mechanical loading induces subchondral bone thickening that may be intensified locally by contiguous articular cartilage lesions.</a> Osteoarthritis and Cartilage. 23 (6), 940-948 (2015).</li><li>Li, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Osteoblasts+subjected+to+mechanical+strain+inhibit+osteoclastic+differentiation+and+bone+resorption+in+a+co-culture+system.">Osteoblasts subjected to mechanical strain inhibit osteoclastic differentiation and bone resorption in a co-culture system.</a> Annals of Biomedical Engineering. 41 (10), 2056-2066 (2013).</li><li>Huang, A. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+use+of+a+novel+bioreactor+for+regeneration+of+biaxially+stretched+tissue-engineered+vessels.">Design and use of a novel bioreactor for regeneration of biaxially stretched tissue-engineered vessels.</a> Tissue Engineering. Part C, Methods. 21 (8), 841-851 (2015).</li><li>Keyes, J. T., Haskett, D. G., Utzinger, U., Azhar, M., Van de Geest, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adaptation+of+a+planar+microbiaxial+optomechanical+device+for+the+tubular+biaxial+microstructural+and+macroscopic+characterization+of+small+vascular+tissues.">Adaptation of a planar microbiaxial optomechanical device for the tubular biaxial microstructural and macroscopic characterization of small vascular tissues.</a> Journal of Biomechanical Engineering. 133 (7), 075001 (2011).</li><li>Brown, T. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Techniques+for+mechanical+stimulation+of+cells+in+vitro:+A+review.">Techniques for mechanical stimulation of cells in vitro: A review.</a> Journal of Biomechanics. 33 (1), 3-14 (2000).</li><li>. Zaber Console software download Available from: <a target="_blank" href="https://www.zaber.com/zaber-software">https://www.zaber.com/zaber-software</a> (2018)</li><li>King, J. D., York, S. L., Saunders, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design,+fabrication+and+characterization+of+a+pure+uniaxial+microloading+system+for+biologic+testing.">Design, fabrication and characterization of a pure uniaxial microloading system for biologic testing.</a> Medical Engineering and Physics. 38 (4), 411-416 (2016).</li><li>Saunders, M. M., Donahue, H. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+of+a+cost-effective+loading+machine+for+biomechanical+evaluation+of+mouse+transgenic+models.">Development of a cost-effective loading machine for biomechanical evaluation of mouse transgenic models.</a> Medical Engineering and Physics. 26 (7), 595-603 (2004).</li></ol>

The goal of this work was to design and fabricate a cost-effective and reliable uniaxial loader for its use with small-scale specimens such as tissue and fibers. A device was constructed that met the requirements set forth while also being flexible enough in design to allow for new attachments to be fabricated as the user needs grow. For example, the device will allow for the testing of dry and wet specimens in a uniaxial or fixed-end configuration.
Critical steps in the design and fabrication...

Mechanical testing has an interesting history that can be traced back to hardness testing equipment developed by Stanley Rockwell in the early in the twentieth century. While technology has grown to the extent that standard, documented practices guide everything from the verification of machine performance to the guidelines for carrying out specific tests1,2,3,4. Today, mechanical tests are conducted on everything from building materials such as concrete, steel, and wood to food and textile products5,6,7,8,9. Given that the fields of biomedical engineering and, more specifically, biomechanics utilize mechanical testing, loading machines are commonplace in biomechanics labs.
Loading machines run the range of scale in biomechanics. As an example, larger loading machines can be used to conduct full-body impact studies or determine human femoral mechanical properties, while smaller loading machines can be used to test murine bones or stimulate cells10,11,12,13,14. Two types of loading machines are found in the testing laboratory; those that are purchased commercially and those that are built by the user. Loading machines developed in-house are often favored for their personalization and customization options15.
In testing, a specimen is secured in the machine so that a displacement can be applied, generating a measurable force. If the load is used as the driving feedback, the test is load-controlled; if the displacement is used as the driving feedback, the test is displacement-controlled. Loading machines, in general, are built upon a frame that connects a mover to a fixed support. As such, testing generally involves one end of the specimen being moved while the other end remains fixed.
Shown in Figure 1 is a sketch of a simple loading machine demonstrating its basic components. Fundamental to all loading machines is a base or frame. Whereas the vast majority of commercial brands utilize a fixed base, the drawing depicts a platform that allows planar (XY) movement. The mover, in this case, is the upper arm that holds a load cell and is driven by a stepper motor. Attached to the frame are the fixtures which hold the specimen and dictate the type of test that is run. Shown in the drawing are three-point bend fixtures. The top fixture (the single contact) is mounted to the moving arm; the bottom fixture (the double contact) is mounted to the stationary base. During testing, the motor drives the upper fixture downward to where the center contact engages the specimen. As the contact engages the specimen, the load cell records the increase in resistance or the force placed upon the specimen.
There are occasions where machines are designed and built in-house to accomplish a motion not attainable with the existing machines in the laboratory. Here we describe in detail one such device. It is a loading platform that enables pure uniaxial specimen loading or equal and opposite motion at both ends. The device incorporates commercial load cells and actuators (movers); a frame is machined to hold the commercial parts and loading fixtures for specimen testing. Understanding the basic principles of testing machine construction can aid in the design of one&#39;s own machine. We have provided the drawing files we created as a starting point to assist researchers with their own machine development. The video will focus on the assembly of the device and the application of mechanical design principles to ensure alignment and reliable testing.

<table border="0" cellpadding="0" cellspacing="0" width="590">
	<tbody>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">Power supply, 24 V DC 2.5 A out, 100-240 V AC in, plug for North America&#160;</td>
			<td style="width:88px;">Zaber Technologies inc</td>
			<td style="width:119px;">PS05-24V25</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">6 pin mini din-male to female PS/2 extension cable</td>
			<td style="width:88px;">Zaber Technologies inc</td>
			<td style="width:119px;">T-DC06</td>
			<td></td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:216px;">Stepper motor controller, 2 phase</td>
			<td style="width:88px;">Zaber Technologies inc</td>
			<td style="width:119px;">A-MCA</td>
			<td style="width:167px;"></td>
		</tr>
		<tr height="60">
			<td height="60" style="height:60px;width:216px;">Linear actuator, NEMA size 11, 30 mm travel, 58 N maximum continuous thrust</td>
			<td style="width:88px;">Zaber Technologies inc</td>
			<td>NA11B30</td>
			<td></td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:216px;">Corrosion resistant maintenance-Free Ball Bearing Carriages and Guide Rails</td>
			<td style="width:88px;">McMaster-Carr</td>
			<td>9184T31</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">6061-t6 Aluminum Stock</td>
			<td style="width:88px;">McMaster-Carr</td>
			<td style="width:119px;">NA</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Plexiglas Stock</td>
			<td style="width:88px;">McMaster-Carr</td>
			<td style="width:119px;">NA</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Canister load cell, 4.5N</td>
			<td style="width:88px;">Honeywell Sensotec</td>
			<td style="width:119px;">NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">USB to 6 pin mini-din</td>
			<td style="width:88px;">Universal&#160;</td>
			<td style="width:119px;">NA</td>
			<td></td>
		</tr>
	</tbody>
</table>

application of design aspects in uniaxial loading machine development

In terms of accurate and precise mechanical testing, machines run the continuum. Whereas commercial platforms offer excellent accuracy, they can be cost-prohibitive, often priced in the $100,000 - $200,000 price range. At the other extreme are stand-alone manual devices that often lack repeatability and accuracy (e.g., a manual crank device). However, if a single use is indicated, it is over-engineering to design and machine something overly elaborate. Nonetheless, there are occasions where machines are designed and built in-house to accomplish a motion not attainable with the existing machines in the laboratory. Described in detail here is one such device. It is a loading platform that enables pure uniaxial loading. Standard loading machines typically are biaxial in that linear loading occurs along the axis and rotary loading occurs about the axis. During testing with these machines, a load is applied to one end of the specimen while the other end remains fixed. These systems are not capable of conducting pure axial testing in which tension/compression is applied equally to the specimen ends. The platform developed in this paper enables the equal and opposite loading of specimens. While it can be used for compression, here the focus is on its use in pure tensile loading. The device incorporates commercial load cells and actuators (movers) and, as is the case with machines built in-house, a frame is machined to hold the commercial parts and fixtures for testing.

In order to verify the use of the system, actuator speed and performance tests were conducted17. These tests consisted of measuring the actuator speed and distance in comparison to the input values. To verify the sample travel distance accuracy, arbitrary travel distances along the shaft between 254 - 2540 &#181;m (0.01 - 0.10 in) were selected. The device was run to these distances and compared to the actual distance measured using combinations of gauge blocks and...

Watch this Scientific Journal Video about Application of Design Aspects in Uniaxial Loading Machine Development at JoVE.com

Application of Design Aspects in Uniaxial Loading Machine Development

Here we present a protocol to develop a pure uniaxial loading machine. Critical design aspects are employed to ensure accurate and reproducible testing results.

In terms of accurate and precise mechanical testing, machines run the continuum. Whereas commercial platforms offer excellent accuracy, they can be ...

Research

Education

JoVE Journal

JoVE Core

Mechanical Engineering

Engineering

Unit 1

Analysis and Design of Beams for Bending

Structural Analysis

SCIENTISTS IN ACTION

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Digital fringe projection (DFP) techniques provide dense 3D measurements of dynamically changing surfaces.&#160;Like the human eyes and brain, DFP uses ...

연구

공학

The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids

폴라 유전체 액체에서 특히 전기 교량의 준비

Horizontal and vertical liquid bridges are simple and powerful tools for exploring the interaction of high intensity electric fields (8-20 kV/cm) and ...

Measuring Spray Droplet Size from Agricultural Nozzles Using Laser Diffraction

레이저 회절을 사용하여 농업 노즐에서 측정 스프레이 물방울 크기

When making an application of any crop protection material such as an herbicide or pesticide, the applicator uses a variety of skills and information to ...

Optical Trap Loading of Dielectric Microparticles In Air

공기에서 유전체 미세 입자의 광학 트랩로드

We demonstrate a method to trap a selected dielectric microparticle in air using radiation pressure from a single-beam gradient optical trap. Randomly ...

Visualizing Uniaxial-strain Manipulation of Antiferromagnetic Domains in Fe1+YTe Using a Spin-polarized Scanning Tunneling Microscope

Visualizing Uniaxial-strain Manipulation of Antiferromagnetic Domains in Fe1+YTe Using a Spin-polarized Scanning Tunneling Microscope

단축 긴장 조작 Fe1 +Y테 스핀 편광 스캔 터널링 현미경을 사용 하 여 Antiferromagnetic 도메인의 시각화

The quest to understand correlated electronic systems has pushed the frontiers of experimental measurements toward the development of new experimental ...

Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation

디지털 이미지 상관 관계를 사용하여 용접된 시편의 공진 피로 테스트에서 균열 모니터링

A procedure using digital image correlation (DIC) to detect cracks on welded specimens during fatigue tests on resonance testing machines is presented. It ...

Evaluating Usability Aspects of a Mixed Reality Solution for Immersive Analytics in Industry 4.0 Scenarios

Industry 4.0 시나리오에서 몰입형 분석을 위한 혼합 현실 솔루션의 유용성 측면 평가

In medicine or industry, the analysis of high-dimensional data sets is increasingly required. However, available technical solutions are often complex to ...

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot

Gecko에서 영감을 받은 소프트 로봇의 제조, 제어 및 성능 평가

This protocol presents a method for manufacturing, control, and evaluation of the performance of a soft robot that can climb inclined flat surfaces with ...

Design and Development of a Three-Dimensionally Printed Microscope Mask Alignment Adapter for the Fabrication of Multilayer Microfluidic Devices

다층 미세 유체 장치의 제조를 위한 입체 인쇄 현미경 마스크 정렬 어댑터의 설계 및 개발

This project aims to develop an easy-to-use and cost-effective platform for the fabrication of precise, multilayer microfluidic devices, which typically ...

In vitro Assessment of Aortic Regurgitation Using Four-Dimensional Flow Magnetic Resonance Imaging

In vitro Assessment of Aortic Regurgitation Using Four-Dimensional Flow Magnetic Resonance Imaging

시험관내 사차원 유동 자기 공명 영상을 이용한 대동맥 역류 평가

Aortic regurgitation (AR) refers to backward blood flow from the aorta into the left ventricle (LV) during ventricular diastole. The regurgitant jet ...