Name: achieving moderate pressures in sealed vessels using dry ice as a solid co2 source
Uploaded: 2018-08-17T14:45:00
Description: Watch this Scientific Journal Video about Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source at JoVE.com

作者希望承认托莱多大学开办的资金, 以及美国化学学会赫尔曼 Frasch 基金会的资金, 部分支持这项工作。托马斯爱上先生得到了他的帮助, 他开发了一个合适的压力表来测量反应压力。史蒂夫. Modar 先生对有用的讨论表示感谢。

警告: 1) 通过反复试验, 下列议定书被认为是安全的。然而, 当密封瓶, 在整个反应, 特别是当打开反应时应谨慎, 因为反应瓶的不均匀性可能导致设备故障。在使用前, 应检查瓶子的物理缺陷。瓶子应该被放置在某种形式的爆炸盾或罩窗扇后, 立即密封, 以防止事故, 如果瓶子失败。2) 虽然几乎没有机会窒息由于少量 CO2使用, 反应应该被设置并且打开在一个通风良好的区域或在通风罩。3) 干冰...

利用范德华状态方程, 可以计算出这些系统的近似压强45 。
情商 1:<img alt="Equation" src="/files/ftp_upload/58281/58281eq1.jpg">
在协议1的条件下, 我们可以假设26.3 毫克的 CO2给n = 5.98 x 10-4 mols
<img alt="Equation 1b" src="/files/ftp_upload/58281/58281eq2.jpg">
粗略估计, 这表明在1号议定书中, 反?...

气体化合物在化学反应中的使用通常需要专门的设备和程序1,2。在工作台刻度上, 某些气体可以直接从油箱中添加, 使用高压调节器3。另一种方法是在低温条件下冷凝气体4,5。虽然有用, 这些战略需要使用专门的压力反应堆与阀门, 这可能是成本高昂的运行许多反应并行。因此, 这可以大大减慢反应筛查的速度。因此, 化学家们发现使用其他方法来介绍这些化合物是可取的。氨可以添加到反应使用不同的羧酸铵盐, 利用弱平衡, 这些盐和自由氨6。转移氢化是烯烃、羰基和硝基基团还原反应的重要策略, 它绕过了以甲酸铵或肼等化合物为 H27的载体的易燃氢气的使用。另一种对这一地区感兴趣的气体是一氧化碳8 -co 可以通过从金属羰基络合物9,10的解放原位产生, 也可以由脱羰产生。来源如合成和芳基11,12,13或氯仿14,15。
在这方面没有取得重大进展的一种气体是二氧化碳16。其中一个原因是, 涉及 CO2的许多转换也需要高温和压力, 因此自动降级到专门的反应堆17,18。然而, 最近开发更多反应性催化剂的努力促进了在 CO219、20、21、22的大气压下运行许多这些反应。我们最近发现了一种反应, 其中二氧化碳可以用来调解γ C (sp3) –H arylation 脂肪胺23。这一战略预计将结合静态指导组方法的好处, 包括酰胺24,25,26,27,28, 磺胺类药物29,30,31,32, thiocarbonyl33,34, 或腙35基指挥小组 (化学鲁棒性), 以容易瞬变指挥小组(减少的步经济)36, 37,38,39。
尽管反应可能发生在 CO2的大气压下, 但对筛查反应的 Schlenk 的需要却是缓慢的。此外, 增加的压力轻微导致改善反应的收益率, 但不能轻易实现使用 Schlenk 线。因此, 我们寻求一种替代战略, 随后确定干冰可以很容易地用作 CO2的固体来源, 可以添加到各种反应容器中, 引入必要量的二氧化碳, 以达到适度压力 (图 1)。虽然在合成中未充分利用, 类似的策略是相当常见的一种方法来生成液体 CO2用于色谱和萃取应用40,41,42,43, 44。利用这一策略, 我们的小组能够快速地筛查大量的反应, 而在2-20 大气压之间获得适度 CO2压力的能力对于提高反应的产量至关重要。在这些条件下, 主要 (1°) 和二次 (2°) 胺可以 arylated 与电子丰富和电子可怜的芳卤化物。

<table>
	<tbody>
		<tr>
			<td>7.5 mL Sample Vial with Screw Cap (Thermoset)</td>
			<td>Qorpak</td>
			<td>GLC-00984</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>40 mL Sample Vial with Screw Cap (Thermoset)</td>
			<td>Qorpak</td>
			<td>GLC-01039</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>Pressure Tube, #15 Thread, 7&#34; Long, 25.4 mm O.D.</td>
			<td>Ace Glass</td>
			<td>8648-06</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>Pie-Block for 2 Dram Vials</td>
			<td>ChemGlass</td>
			<td>CG-1991-P14</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>Pie-Block for 10 Dram Vials</td>
			<td>ChemGlass</td>
			<td>CG-1991-P12</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>3.2 mm PTFE Disposable Stir Bars</td>
			<td>Fisher</td>
			<td>14-513-93</td>
			<td>Can be reused.</td>
		</tr>
		<tr>
			<td>C-MAG HS 7 Control Hotplate</td>
			<td>IKA</td>
			<td>20002695</td>
			<td></td>
		</tr>
		<tr>
			<td>Analytical Weighing Balance</td>
			<td>Sartorius</td>
			<td>QUINTIX2241S</td>
			<td></td>
		</tr>
		<tr>
			<td>Double-Ended Micro-Tapered Spatula</td>
			<td>Fisher Scientific</td>
			<td>21-401-10</td>
			<td></td>
		</tr>
		<tr>
			<td>Hei-VAP Advantage - Hand Lift Model with G5 Dry Ice Condenser Rotary Evaporator</td>
			<td>Heidolph</td>
			<td>561-01500-00</td>
			<td></td>
		</tr>
		<tr>
			<td>Bump Trap 14/20 Joint</td>
			<td>ChemGlass</td>
			<td>CG-1322-01</td>
			<td></td>
		</tr>
		<tr>
			<td>tert-Amyl amine</td>
			<td>Alfa Aesar</td>
			<td>B24639-14</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>2-Methyl-N-(3-methylbenzyl)butan-2-amine</td>
			<td>N/A</td>
			<td>N/A</td>
			<td>Prepared from reductive amination of tert-amyl amine and 3-tolualdehyde in the presence of sodium borohydride in methanol.</td>
		</tr>
		<tr>
			<td>Palladium Acetate</td>
			<td>Chem-Impex International, Inc.</td>
			<td>4898</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Silver Trifluoroacetate</td>
			<td>Oakwood Chemicals</td>
			<td>007271</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Phenyl Iodide</td>
			<td>Oakwood Chemicals</td>
			<td>003461</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Acetic Acid</td>
			<td>Fisher Chemical</td>
			<td>A38</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>1,1,1,3,3,3-Hexafluoroisopropanol</td>
			<td>Oakwood Chemicals</td>
			<td>003409</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Deionized Water</td>
			<td></td>
			<td></td>
			<td>Obtained from in-house deionized water system.</td>
		</tr>
		<tr>
			<td>Dry Ice</td>
			<td>Carbonic Enterprises Dry Ice Inc.</td>
			<td></td>
			<td>Non-food grade dry ice.</td>
		</tr>
		<tr>
			<td>Concentrated Hydrochloric Acid</td>
			<td>Fisher Chemical</td>
			<td>A144SI</td>
			<td>Diluted to a 1.2 M solution prior to use.</td>
		</tr>
		<tr>
			<td>Diethyl Ether, Certified</td>
			<td>Fisher Chemical</td>
			<td>E138</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Hexanes, Certified ACS</td>
			<td>Fisher Chemical</td>
			<td>H292</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Saturated Ammonium Hydroxide</td>
			<td>Fisher Chemical</td>
			<td>A669</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Dichloromethane</td>
			<td>Fisher Chemical</td>
			<td>D37</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>Sodium Sulfate, Anhydrous</td>
			<td>Oakwood Chemicals</td>
			<td>044702</td>
			<td>Used as received.</td>
		</tr>
		<tr>
			<td>250 mL Separatory Funnel</td>
			<td></td>
			<td></td>
			<td>Prepared in-house by staff glassblower.</td>
		</tr>
		<tr>
			<td>100 mL Round Bottom Flask</td>
			<td></td>
			<td></td>
			<td>Prepared in-house by staff glassblower.</td>
		</tr>
		<tr>
			<td>Scientific Disposable Funnel</td>
			<td>Caplugs</td>
			<td>2085136030</td>
			<td></td>
		</tr>
		<tr>
			<td>Borosilicate Glass Scintillation Vials, 20 mL</td>
			<td>Fisher Scientific</td>
			<td>03-337-15</td>
			<td></td>
		</tr>
		<tr>
			<td>5 mm O.D. Thin Walled Precision NMR Tubes</td>
			<td>Wilmad</td>
			<td>666000575</td>
			<td></td>
		</tr>
		<tr>
			<td>Chloroform-d</td>
			<td>Cambridge Isotope Laboratories, Inc.</td>
			<td>DLM-7</td>
			<td>Used as received.</td>
		</tr>
	</tbody>
</table>

achieving moderate pressures in sealed vessels using dry ice as a solid co2 source

本文提出了在轻度至中度 CO2压力下, 用干冰进行反应的一般策略。这种技术省却了需要专门的设备来达到适度的压力, 甚至可以用来在更专业的设备和更坚固的反应容器中获得更高的压力。在反应结束时, 瓶子可以很容易地减压在室温下打开。在本例子 CO2担当两个假定的指挥的小组并且方式到钝化胺基体, 从而防止氧化在有机金属反应期间。除了容易添加, 指导组也被排除在真空下, 不需要广泛的净化, 以消除指导组。这一策略允许简便的γ C (sp3) H arylation 脂肪胺, 并有可能被应用于各种其他胺基反应。

遵循这些协议, 有可能向反应瓶收取适量的二氧化碳, 以实现化学反应, 需要 CO2大气。在步骤1中实现的压力计算为大约3大气压 (参见讨论确定这个值), 虽然由于部分溶剂化, 观察到的压力在室温附近2大气压, 应大约2.6 大气在反应条件之下。因此, 在步骤1中的条件下, 2-甲基-4-苯基丁胺可以获得69% 的产量 (图 2)。通过升华 CO2 (步骤 2) 首?...

Watch this Scientific Journal Video about Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source at JoVE.com

Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source

在这里, 我们提出了一个协议, 以执行反应的简单反应容器在低到中等压力的 CO2。这种反应可以通过在各种容器中进行, 只需以干冰的形式管理二氧化碳, 而不需要昂贵的或精密的设备或装置。

用干冰作为固体 CO2源实现密封容器中的适度压力

Herein is presented a general strategy to perform reactions under mild to moderate CO2 pressures with dry ice. This technique obviates the need for ...

Research

JoVE Journal

Chemistry

Achieving Moderate Pressures in Sealed Vessels Using Dry Ice As a Solid CO2 Source

Untargeted Metabolomics from Biological Sources Using Ultraperformance Liquid Chromatography-High Resolution Mass Spectrometry (UPLC-HRMS)

Untargeted Metabolomics from Biological Sources Using Ultraperformance Liquid Chromatography-High Resolution Mass Spectrometry UPLC-HRMS

不相关的代谢组学，生物源使用超高效液相色谱 - 高分辨质谱（UPLC-HRMS）

Here we present a workflow to analyze the metabolic profiles for biological samples of interest including; cells, serum, or tissue. The sample is first ...

科研

化学

Determining the Ice-binding Planes of Antifreeze Proteins by Fluorescence-based Ice Plane Affinity

通过荧光基冰平面亲和力确定防冻蛋白的冰结合平面

Antifreeze proteins (AFPs) are expressed in a variety of cold-hardy organisms to prevent or slow internal ice growth. AFPs bind to specific planes of ice ...

High-pressure Sapphire Cell for Phase Equilibria Measurements of CO2/Organic/Water Systems

High-pressure Sapphire Cell for Phase Equilibria Measurements of CO2/Organic/Water Systems

The high pressure sapphire cell apparatus was constructed to visually determine the composition of multiphase systems without physical sampling. ...

Preparing Adherent Cells for X-ray Fluorescence Imaging by Chemical Fixation

化学固定准备贴壁细胞的X射线荧光成像

X-ray fluorescence imaging allows us to non-destructively measure the spatial distribution and concentration of multiple elements simultaneously over ...

Atom Transfer Radical Polymerization of Functionalized Vinyl Monomers Using Perylene as a Visible Light Photocatalyst

使用苝作为可见光光催化功能化的乙烯基单体原子转移自由基聚合

A standardized technique for atom transfer radical polymerization of vinyl monomers using perylene as a visible-light photocatalyst is presented. The ...

Measurement of Particle Size Distribution in Turbid Solutions by Dynamic Light Scattering Microscopy

通过动态光散射显微镜混浊解决方案粒度分布的测定

A protocol for measuring polydispersity of concentrated polymer solutions using dynamic light scattering is described. Dynamic light scattering is a ...

Quantifying X-Ray Fluorescence Data Using MAPS

利用地图量化 X 射线荧光数据

The quantification of X-ray fluorescence (XRF) microscopy maps by fitting the raw spectra to a known standard is crucial for evaluating chemical ...

Minimum Burning Pressures of Water-based Emulsion Explosives

水性乳化炸药的最小燃烧压力

This manuscript describes a protocol to measure the minimum pressure required for sustained burning of water-based emulsion explosives. Pumping ...

Solid-phase Synthesis of [4.4] Spirocyclic Oximes

[4.4] 刺环氧基的固相合成

A convenient synthetic route for spirocyclic heterocycles is well sought after due to the molecule&#39;s potential use in biological systems. By means of ...

In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework

In situ FTIR Spectroscopy as a Tool for Investigation of Gas/Solid Interaction: Water-Enhanced CO2 Adsorption in UiO-66 Metal-Organic Framework

原位FTIR 光谱作为气体/固体相互作用研究工具：UiO-66 金属-有机框架中的水增强 CO2吸附

In situ infrared spectroscopy is an inexpensive, highly sensitive, and selective valuable tool to investigate the interaction of polycrystalline solids ...