Name: procedure for the transfer of polymer films onto porous substrates with minimized defects
Uploaded: 2019-06-22T14:00:00
Description: Watch this Scientific Journal Video about Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects at JoVE.com

This work was supported as part of the Advanced Materials for Energy-Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences. We gratefully acknowledge helpful discussions with Mark Stoykovich and Paul Nealey.

1. Fabrication of the transfer tool and drain chamber system
<ol>
	<li>Attached (Supplementary Files 1, 2) is the engineering drawing for the drain chamber assembly consisting of two parts: top and bottom. Model this device according to the specifications of the desired system (e.g., the outer diameter of the receiving substrate) and export as an STL file for 3D printing.</li>
	<li>For the top part, utilize a filament printer of choice and print in the lowest resolution possible, inclu...

<ol>
	<li>Shah, A., Torres, P., Tscharner, R., Wyrsch, N., Keppner, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photovoltaic+technology:+the+case+for+thin-film+solar+cells.">Photovoltaic technology: the case for thin-film solar cells.</a> Science. 285 (5428), 692-698 (1999).</li><li>Kim, T. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Full-colour+quantum+dot+displays+fabricated+by+transfer+printing.">Full-colour quantum dot displays fabricated by transfer printing.</a> Nat. Photon. 5 (3), 176 (2011).</li><li>Nomura, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Room-temperature+fabrication+of+transparent+flexible+thin-film+transistors+using+amorphous+oxide+semiconductors.">Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors.</a> Nature. 432 (7016), 488 (2004).</li><li>Pirkle, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+chemical+residues+on+the+physical+and+electrical+properties+of+chemical+vapor+deposited+graphene+transferred+to+SiO2.">The effect of chemical residues on the physical and electrical properties of chemical vapor deposited graphene transferred to SiO2.</a> Applied Physics Letters. 99 (12), 122108-122110 (2011).</li><li>Chae, S. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+large-area+graphene+layers+on+poly-nickel+substrate+by+chemical+vapor+deposition:+wrinkle+formation.">Synthesis of large-area graphene layers on poly-nickel substrate by chemical vapor deposition: wrinkle formation.</a> Advanced Materials. 21 (22), 2328-2333 (2009).</li><li>Zhu, W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+and+electronic+transport+in+graphene+wrinkles.">Structure and electronic transport in graphene wrinkles.</a> Nano Letters. 12 (7), 3431-3436 (2012).</li><li>Paronyan, T. M., Pigos, E. M., Chen, G., Harutyunyan, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+of+ripples+in+graphene+as+a+result+of+interfacial+instabilities.">Formation of ripples in graphene as a result of interfacial instabilities.</a> ACS Nano. 5 (12), 9619-9627 (2011).</li><li>Stadermann, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+large-area+free-standing+ultrathin+polymer+films.">Fabrication of large-area free-standing ultrathin polymer films.</a> Journal of Visualized Experiments : JoVE. (100), e52832 (2015).</li><li>Zhou, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+of+Nanoporous+Alumina+Ultrafiltration+Membrane+with+Tunable+Pore+Size+Using+Block+Copolymer+Templates.">Fabrication of Nanoporous Alumina Ultrafiltration Membrane with Tunable Pore Size Using Block Copolymer Templates.</a> Advanced Functional Materials. 27 (34), 1701756 (2017).</li><li>Meitl, M. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transfer+printing+by+kinetic+control+of+adhesion+to+an+elastomeric+stamp.">Transfer printing by kinetic control of adhesion to an elastomeric stamp.</a> Nature Materials. 5 (1), 33 (2006).</li><li>Suk, J. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transfer+of+CVD-grown+monolayer+graphene+onto+arbitrary+substrates.">Transfer of CVD-grown monolayer graphene onto arbitrary substrates.</a> ACS Nano. 5 (9), 6916-6924 (2011).</li><li>Chen, Y., Gong, X. L., Gai, J. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Progress+and+Challenges+in+Transfer+of+Large-Area+Graphene+Films.">Progress and Challenges in Transfer of Large-Area Graphene Films.</a> Advanced Science. 3 (8), 1500343 (2016).</li></ol>

While many of the steps listed in this protocol are crucial for the success of the thin film transfer, the nature of the custom-designed 3D printed drain chamber allows for broad flexibility, according to the user's specific requirements. For example, if the receiver substrate has a larger diameter than the 25-mm-diameter AAO discs utilized in this study, the drain chamber can be appropriately modified to fit the new specifications. However, there are certain aspects of the protocol that are necessary to ensure effective...

Thin film and nanomembrane-based devices have recently garnered wide interest due to their potential use in a broad range of applications, ranging from flexible photovoltaics and photonics, foldable displays, and wearable electronics1,2,3. A requirement for the fabrication of these various types of devices is the transfer of thin films to the surfaces of arbitrary substrates, which remains challenging due to the fragility of these films and the frequent production of macroscale defect structures, such as wrinkles, cracks, and tears, within the films after transfer4,5,6,7. Manual transfer by hand, tweezers, and wire loops are common methods of thin film transfer, but inevitably result in structural incongruities and plastic deformation8,9. Various types of thin film transfer methodologies have been explored such as: 1) polydimethylsiloxane (PDMS) stamp transfer, which involves the use of an elastomeric stamp to obtain the thin film from the donor substrate and subsequently transfer to the receiving substrate10, and 2) sacrificial layer transfer11, in which an etchant is used to selectively dissolve a sacrificial layer between the support substrate and the thin film, thereby lifting off the thin film. However, these techniques alone do not necessarily allow for thin film transfer without incurring damage to or defect formation within the thin films12.
Here, we present a novel, low-cost, and generalizable facile method based on sacrificial layer lift-off and meniscus-guided transfer within a custom-designed, 3D-printed drain chamber system, to mechanically place block copolymer (BCP) thin films onto the centers of porous substrates such as anodized aluminum oxide (AAO) discs with little-to-no incurred macroscale defect structures, such as wrinkles, tears, and cracks. In the present context, these transferred thin films can then be used as devices in water filtration studies, potentially after sequential infiltration synthesis (SIS) processing9. Image analysis of transferred films obtained from optical microscopy show that the meniscus-guided, drain-chamber system provides smooth, robust, and wrinkle-free samples. In addition, the images also demonstrate the system&#39;s ability to reliably place the thin film membranes onto the centers of the receiving substrates. Our results have significant implications for any type of device application requiring the transfer of thin film structures onto the surfaces of arbitrary porous substrates.

<table border="0" cellpadding="0" cellspacing="0" style="width:631px;" width="631">
	<tbody>
		<tr height="42">
			<td height="42" style="height:42px;width:264px;">35% sodium polyacrylic acid solution</td>
			<td style="width:73px;">Sigma Aldrich</td>
			<td style="width:123px;">9003-01-4&#160;&#160;</td>
			<td style="width:171px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">Amicon Stirred Cell model 8010 10mL</td>
			<td style="width:73px;">Millipore</td>
			<td style="width:123px;">5121</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:264px;">Anodized aluminum oxide, 0.2u thickness, 25mm diameter</td>
			<td style="width:73px;">Sigma Aldrich</td>
			<td style="width:123px;">WHA68096022</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">o ring neoprene 117</td>
			<td style="width:73px;">Grainger</td>
			<td>1BUV7</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">Objet500 Connex3 3D Printer</td>
			<td style="width:73px;">Stratasys</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">Onshape 3D software</td>
			<td style="width:73px;">onshape</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">Polylactic acid filament</td>
			<td style="width:73px;">Ultimaker</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">ultimaker3 3d filament printer</td>
			<td style="width:73px;">Ultimaker</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:264px;">Vero Family printable materials</td>
			<td style="width:73px;">Stratasys</td>
			<td style="width:123px;"></td>
			<td></td>
		</tr>
	</tbody>
</table>

procedure for the transfer of polymer films onto porous substrates with minimized defects

The fabrication of devices containing thin film composite membranes necessitates the transfer of these films onto the surfaces of arbitrary support substrates. Accomplishing this transfer in a highly controlled, mechanized, and reproducible manner can eliminate the creation of macroscale defect structures (e.g., tears, cracks, and wrinkles) within the thin film that compromise device performance and the usable area per sample. Here, we describe a general protocol for the highly controlled and mechanized transfer of a polymeric thin film onto an arbitrary porous support substrate for eventual use as a water filtration membrane device. Specifically, we fabricate a block copolymer (BCP) thin film on top of a sacrificial, water-soluble poly(acrylic acid) (PAA) layer and silicon wafer substrate. We then utilize a custom-designed, 3D-printed transfer tool and drain chamber system to deposit, lift-off, and transfer the BCP thin film onto the center of a porous anodized aluminum oxide (AAO) support disc. The transferred BCP thin film is shown to be consistently placed onto the center of the support surface due to the guidance of the meniscus formed between the water and the 3D-printed plastic drain chamber. We also compare our mechanized transfer-processed thin films to those that have been transferred by hand with the use of tweezers. Optical inspection and image analysis of the transferred thin films from the mechanized process confirm that little-to-no macroscale inhomogeneities or plastic deformations are produced, as compared to the multitude of tears and wrinkles produced from manual transfer by hand. Our results suggest that the proposed strategy for thin film transfer can reduce defects when compared to other methods across many systems and applications.

The BCP membrane samples were fabricated according to the previously described procedure9. The samples were placed onto the lip of the loading arm of the 3D-printed transfer tool (Figure 1, left) and subsequently lowered, with a laboratory jack, onto the entrance ramp of the 3D-printed drain chamber tool (Figure 1, right). A sacrificial layer of poly(acrylic acid) (PAA) between the BCP membrane and underly...

Watch this Scientific Journal Video about Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects at JoVE.com

Procedure for the Transfer of Polymer Films Onto Porous Substrates with Minimized Defects

We present a procedure for highly controlled and wrinkle-free transfer of block copolymer thin films onto porous support substrates using a 3D-printed drain chamber. The drain chamber design is of general relevance to all procedures involving transfer of macromolecular films onto porous substrates, which is normally done by hand in an irreproducible fashion.

The fabrication of devices containing thin film composite membranes necessitates the transfer of these films onto the surfaces of arbitrary support ...

Research

JoVE Journal

Engineering

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

Conducting polymers have attracted great attention since the discovery of high conductivity in doped polyacetylene in 19771. They offer the advantages of ...

Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light

The poor response of dye-sensitized solar cells (DSCs) to red and infrared light is a significant impediment to the realization of higher photocurrents ...

SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots

Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in ...

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step ...

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

This paper describes three methods of preparing fluorescent microspheres comprising &#960;-conjugated or non-conjugated polymers: vapor diffusion, ...

Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition

Ultra-thin film structures have been studied extensively for use as optical coatings, but performance and fabrication challenges remain.&#160; We present ...

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication

We have demonstrated that through the sulfurization of transition metal films such as molybdenum (Mo) and tungsten (W), large-area and uniform transition ...

Fabricating Reactive Surfaces with Brush-like and Crosslinked Films of Azlactone-Functionalized Block Co-Polymers

In this paper, fabrication methods that generate novel surfaces using the azlactone-based block co-polymer, poly (glycidyl methacrylate)-block-poly (vinyl ...

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7&#8722;&#948;/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 (STO) Single-crystal Substrates

Radio Frequency Magnetron Sputtering of GdBa2Cu3O7ÃƒÆ’Ã‚Â¢Ãƒâ€¹Ã¢â‚¬Â 'ÃƒÆ’Ã…Â½Ãƒâ€šÃ‚Â´/ La0.67Sr0.33MnO3 Quasi-bilayer Films on SrTiO3 STO Single-crystal Substrates

Here, we demonstrate a method of coating ferromagnetic La0.67Sr0.33MnO3 (LSMO) nanoparticles on (001) SrTiO3 (STO) single-crystal substrates by radio ...

Synthesis, Functionalization, and Characterization of Fusogenic Porous Silicon Nanoparticles for Oligonucleotide Delivery

With the advent of gene therapy, the development of an effective in vivo nucleotide-payload delivery system has become of parallel import. Fusogenic ...