Name: organic solvent-based protein precipitation for robust proteome purification ahead of mass spectrometry
Uploaded: 2022-02-07T14:30:00
Description: Watch this Scientific Journal Video about Organic Solvent-Based Protein Precipitation for Robust Proteome Purification Ahead of Mass Spectrometry at JoVE.com

This work was funded by the Natural Sciences and Engineering Research Council of Canada. The authors thank Bioinformatics Solutions Inc. (Waterloo, Canada) and SPARC BioCentre (Molecular Analysis) at the Hospital for Sick Children (Toronto, Canada) for their contributions to the acquisition of MS data.

1. Material considerations and sample pre-preparation
<ol>
	<li>Use only high purity solvents (acetone, chloroform, methanol) (&#62;99.5%) and chemicals, free of excess moisture.</li>
	<li>Prepare sodium chloride and zinc sulfate solutions (1 M) in water. 
	NOTE: Salt solutions can be stored indefinitely at room temperature, as&#160;long as they are free of contaminant or microbial growth.</li>
	<li>Use the smallest polypropylene (PP) microcentrifuge vial sufficient to retain the required volume o...

Optimal MS characterization is achieved when residual SDS is depleted below 10 ppm. While alternative approaches, such as FASP and on-bead digestion, offer quantitative SDS depletion with variable recovery31,32,33, the primary objective of precipitation is to maximize purity and yield simultaneously. This depends on effectively isolating the supernatant (containing the SDS) without disturbing the protein pellet. With vial-based ...

Proteome analysis by mass spectrometry has become increasingly rigorous, owing to the enhanced sensitivity, resolution, scan speed, and versatility of modern MS instruments. MS advances contribute to greater protein identification efficiency and more precise quantitation1,2,3,4,5. With improved MS instrumentation, researchers demand a correspondingly consistent front-end sample preparation strategy capable of quantitative recovery of high-purity proteins in minimal time across all stages of the workflow6,7,8,9,10,11. To accurately reflect the proteome status of a biological system, proteins must be isolated from the native sample matrix in an efficient and unbiased fashion. To this end, including a denaturing surfactant, such as sodium dodecyl sulfate (SDS), ensures efficient protein extraction and solubilization12. However, SDS strongly interferes with electrospray ionization, causing severe MS signal suppression if not properly eliminated13.
Various SDS depletion strategies are available for subsequent proteome analysis, such as the retention of proteins above a molecular weight cutoff filter contained within disposable spin cartridges14,15,16. The filter-aided sample preparation method (FASP) is favored as it effectively depletes SDS below 10 ppm, facilitating optimal MS. However, protein recovery with FASP is variable, which prompted the exploration of other techniques. Chromatographic approaches that selectively capture protein (or surfactant) have evolved into various convenient cartridges or bead-based formats17,18,19,20,21. Given these simple and (ideally) consistent strategies to protein purification, the classical approach of protein precipitation with organic solvents is often overlooked as a promising approach to protein isolation. While solvent precipitation is shown to deplete SDS below critical levels successfully, protein recovery has been a longstanding concern of this approach. Multiple groups have observed a protein recovery bias, with unacceptably low precipitation yields as a function of protein concentration, molecular weight, and hydrophobicity22,23. Due to the diversity of precipitation protocols reported in the literature, standardized precipitation conditions were developed. In 2013, Crowell et al. first reported the dependence of ionic strength on the precipitation efficiency of proteins in 80% acetone24. For all proteins examined, the addition of up to 30 mM sodium chloride was shown to be essential to maximize yields (up to 100% recovery). More recently, Nickerson et al. showed that the combination of even higher ionic strength (up to 100 mM) with elevated temperature (20 &#176;C) during acetone precipitation gave near quantitative recovery in 2-5 min25. A slight drop in the recovery of low molecular weight (LMW) proteins was observed. Therefore, a subsequent report by Baghalabadi et al. demonstrated the successful recovery of LMW proteins and peptides (&#8804;5 kDa) by combining specific salts, particularly zinc sulfate, with a higher level of organic solvent (97% acetone)26.
While refining the precipitation protocol lends a more reliable protein purification strategy for MS-based proteomics, the success of conventional precipitation relies heavily on user technique. A primary goal of this work is to present a robust precipitation strategy that facilitates the isolation of the protein pellet from the contaminating supernatant. A disposable filtration cartridge was developed to eliminate pipetting by isolating aggregated protein above a porous PTFE membrane filter27. MS-interfering components in the supernatant are effectively removed in a short, low-speed&#160;centrifugation step. The disposable filter cartridge also offers an interchangeable SPE cartridge, which facilitates subsequent sample clean-up following resolubilization and optional protein digestion, ahead of mass spectrometry.
A series of recommended proteome precipitation workflows are presented here, including modified acetone and chloroform/methanol/water28 protocols, in a conventional (vial-based) and a semi-automated format in a disposable two-state filtration and extraction cartridge. The resulting protein recoveries and SDS depletion efficiencies are highlighted, together with bottom-up LC-MS/MS proteome coverage, to demonstrate the expected outcome from each protocol. The practical benefits and drawbacks associated with each approach are discussed.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr >
			<td >Acetone</td>
			<td >Fisher Scientific</td>
			<td >AC177170010</td>
			<td >&#8804;0.002 % aldehyde</td>
		</tr>
		<tr >
			<td >Acetonitrile</td>
			<td >Fisher Scientific</td>
			<td >A998-4</td>
			<td >HPLC grade</td>
		</tr>
		<tr >
			<td >Ammonium Bicarbonate</td>
			<td >Millipore Sigma</td>
			<td>A6141-1KG</td>
			<td >solid</td>
		</tr>
		<tr >
			<td >Beta mercaptoethanol</td>
			<td >Millipore Sigma</td>
			<td>M3148-25ML</td>
			<td >Molecular biology grade</td>
		</tr>
		<tr >
			<td >Bromophenol blue</td>
			<td >Millipore Sigma</td>
			<td>B8026-5G</td>
			<td >Bromophenol blue sodium salt</td>
		</tr>
		<tr >
			<td >Chloroform</td>
			<td >Fisher Scientific</td>
			<td >C298-400</td>
			<td >Chloroform</td>
		</tr>
		<tr >
			<td >Formic Acid</td>
			<td >Honeywell</td>
			<td >56302</td>
			<td >Eluent additive for LC-MS</td>
		</tr>
		<tr >
			<td >Fusion Lumos Mass Spectrometer</td>
			<td >ThermoFisher Scientific</td>
			<td ></td>
			<td >for analysis of standard protein mixture</td>
		</tr>
		<tr >
			<td >Glycerol</td>
			<td >Millipore Sigma</td>
			<td >356352-1L-M</td>
			<td >For molecular biology, &#62; 99%</td>
		</tr>
		<tr >
			<td >Isopropanol</td>
			<td >Fisher Scientific</td>
			<td >A4641</td>
			<td >HPLC grade</td>
		</tr>
		<tr >
			<td >Methanol</td>
			<td >Fisher Scientific</td>
			<td >A452SK-4</td>
			<td >HPLC grade</td>
		</tr>
		<tr >
			<td >Microcentrifuge</td>
			<td >Fisher Scientific</td>
			<td >75-400-102</td>
			<td >up to 21,000 xg</td>
		</tr>
		<tr >
			<td >Microcentrifuge Tube (1.5 mL)</td>
			<td >Fisher Scientific</td>
			<td >05-408-130</td>
			<td >tapered bottom</td>
		</tr>
		<tr >
			<td >Microcentrifuge Tube&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160; (2 mL)</td>
			<td >Fisher Scientific</td>
			<td >02-681-321</td>
			<td >rounded bottom</td>
		</tr>
		<tr >
			<td >Micropipette Tips&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160; (0.1-10 &#956;L)</td>
			<td >Fisher Scientific</td>
			<td >21-197-28</td>
			<td >Universal pipet tip, non-sterile</td>
		</tr>
		<tr >
			<td >Micropipette Tips&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160; (1-200 &#956;L)</td>
			<td >Fisher Scientific</td>
			<td >07-200-302</td>
			<td >Universal pipet tip, non-sterile</td>
		</tr>
		<tr >
			<td >Micropipette Tips&#160;&#160;&#160;&#160;&#160;&#160;&#160; (200-1000 &#956;L)</td>
			<td >Fisher Scientific</td>
			<td >07-200-303</td>
			<td >Universal pipet tip, non-sterile</td>
		</tr>
		<tr >
			<td >Micropipettes</td>
			<td >Fisher Scientific</td>
			<td >13-710-903</td>
			<td >Micropipet Trio pack</td>
		</tr>
		<tr >
			<td >Pepsin</td>
			<td >Millipore Sigma</td>
			<td>P0525000</td>
			<td >Lyophilized powder,&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160;&#160; &#62;3200 units/ mg</td>
		</tr>
		<tr >
			<td >ProTrap XG</td>
			<td >Proteoform Scientific</td>
			<td >PXG-0002</td>
			<td >50 complete units per box</td>
		</tr>
		<tr >
			<td >Sodium Chloride</td>
			<td >Millipore Sigma</td>
			<td >S9888-1KG</td>
			<td >ACS reagent, &#62;99 %</td>
		</tr>
		<tr >
			<td >Sodium Dodecyl Sulfate</td>
			<td >ThermoFisher Scientific</td>
			<td >28312</td>
			<td >powdered solid</td>
		</tr>
		<tr >
			<td >timsTOF Pro Mass Spectrometer</td>
			<td >Bruker</td>
			<td ></td>
			<td >for analysis of liver proteome extract</td>
		</tr>
		<tr >
			<td >Trifluoroacetic Acid</td>
			<td >ThermoFisher Scientific</td>
			<td >L06374.AP</td>
			<td >99%</td>
		</tr>
		<tr >
			<td >Tris</td>
			<td >Fisher Scientific</td>
			<td >BP152-500</td>
			<td >Molecular biology grade</td>
		</tr>
		<tr >
			<td >Trypsin</td>
			<td >Millipore Sigma</td>
			<td >9002-07-7</td>
			<td >From bovine pancreas, TPCK-treated</td>
		</tr>
		<tr >
			<td >Urea</td>
			<td >Bio-Rad</td>
			<td >1610731</td>
			<td >solid</td>
		</tr>
		<tr >
			<td >Water (deionized)</td>
			<td>Sartorius Arium Mini Water Purification System</td>
			<td>76307-662</td>
			<td >Type 1 ultrapure (18.2 M&#937; cm)</td>
		</tr>
		<tr >
			<td >Zinc Sulfate</td>
			<td >Millipore Sigma</td>
			<td>307491-100G</td>
			<td >solid</td>
		</tr>
	</tbody>
</table>

organic solvent-based protein precipitation for robust proteome purification ahead of mass spectrometry

While multiple advances in mass spectrometry (MS) instruments have improved qualitative and quantitative proteome analysis, more reliable front-end approaches to isolate, enrich, and process proteins ahead of MS are critical for successful proteome characterization. Low, inconsistent protein recovery and residual impurities such as surfactants are detrimental to MS analysis. Protein precipitation is often considered unreliable, time-consuming, and technically challenging to perform compared to other sample preparation strategies. These concerns are overcome by employing optimal protein precipitation protocols. For acetone precipitation, the combination of specific salts, temperature control, solvent composition, and precipitation time is critical, while the efficiency of chloroform/methanol/water precipitation depends on proper pipetting and vial manipulation. Alternatively, these precipitation protocols are streamlined and semi-automated within a disposable spin cartridge. The expected outcomes of solvent-based protein precipitation in the conventional format and using a disposable, two-stage filtration and extraction cartridge are illustrated in this work. This includes the detailed characterization of proteomic mixtures by bottom-up LC-MS/MS analysis. The superior performance of SDS-based workflows is also demonstrated relative to non-contaminated protein.

Figure 4 summarizes the expected SDS depletion following vial-based or cartridge-facilitated precipitation of proteins in a disposable filter cartridge using acetone. Conventional overnight incubation (-20 &#176;C) in acetone is compared to the rapid acetone precipitation protocol at room temperature (step 2), as well as CMW precipitation (step 4). Residual SDS was quantified by the methylene blue active substances (MBAS) assay29. Briefly, 100 &#181;L sample was combi...

Watch this Scientific Journal Video about Organic Solvent-Based Protein Precipitation for Robust Proteome Purification Ahead of Mass Spectrometry at JoVE.com

Organic Solvent-Based Protein Precipitation for Robust Proteome Purification Ahead of Mass Spectrometry

The present protocol describes solvent-based protein precipitation under controlled conditions for robust and rapid recovery and purification of proteome samples prior to mass spectrometry.

While multiple advances in mass spectrometry (MS) instruments have improved qualitative and quantitative proteome analysis, more reliable front-end ...

Research

Education

JoVE Core

JoVE Journal

Analytical Chemistry

Chemistry

Unit 1

Complexometric Titration, Precipitation Titration, and Gravimetry

SCIENTISTS IN ACTION

Analyzing Protein Dynamics Using Hydrogen Exchange Mass Spectrometry

수소 환율 질량 분석을 사용하여 단백질의 역학 분석

All cellular processes depend on the functionality of proteins. Although the functionality of a given protein is the direct consequence of its unique ...

연구

화학

Analysis of Volatile and Oxidation Sensitive Compounds Using a Cold Inlet System and Electron Impact Mass Spectrometry

콜드 입구 시스템 및 전자 충격 질량 분석법을 사용하여 휘발성 및 산화에 민감한 화합물의 분석

This video presents a protocol for the mass spectrometrical analysis of volatile and oxidation sensitive compounds using electron impact ionization. The ...

Visualization of Ambient Mass Spectrometry with the Use of Schlieren Photography

슐 리렌 사진의 사용과 주변 질량 분석의 시각화

This manuscript outlines how to visualize mass spectrometry ambient ionization sources using schlieren photography. In order to properly optimize the mass ...

An HS-MRM Assay for the Quantification of Host-cell Proteins in Protein Biopharmaceuticals by Liquid Chromatography Ion Mobility QTOF Mass Spectrometry

액체 크로마토그래피 이온 이동성 QTOF 질량 분석에 의해 단백질 바이오에 주인 세포 단백질의 정량화에 대 한 HS MRM 분석 결과

The analysis of low-level (1-100 ppm) protein impurities (e.g., host-cell proteins (HCPs)) in protein biotherapeutics is a challenging assay requiring ...

Fizzy Extraction of Volatile Organic Compounds Combined with Atmospheric Pressure Chemical Ionization Quadrupole Mass Spectrometry

대기압 화학 이온화와 결합 된 휘발성 유기 화합물의 탄산염 추출 4 극자 질량 분광법

Chemical analysis of volatile and semivolatile compounds dissolved in liquid samples can be challenging. The dissolved components need to be brought to ...

Real-time Breath Analysis by Using Secondary Nanoelectrospray Ionization Coupled to High Resolution Mass Spectrometry

고 분해능 질량 분석을 결합 하는 보조 Nanoelectrospray 이온화를 사용 하 여 실시간 호흡 분석

Exhaled volatile organic compounds (VOCs) have aroused considerable interest, since they can serve as biomarkers for disease diagnosis and environmental ...

Synthesis and Mass Spectrometry Analysis of Oligo-peptoids

합성 및 올리고 peptoids의 질량 분석 분석

Peptoids are sequence-controlled peptide-mimicking oligomers consisting of N-alkylated glycine units. Among many potential applications, peptoids have ...

Analyzing Protein Architectures and Protein-Ligand Complexes by Integrative Structural Mass Spectrometry

단백질 구조와 통합 구조 질량 분석, 단백질-리간드 단지 분석

Proteins are an important class of biological macromolecules that play many key roles in cellular functions including gene expression, catalyzing ...

Mass Spectrometry-Guided Genome Mining as a Tool to Uncover Novel Natural Products

새로운 천연 제품을 발견하는 도구로 질량 분광법 유도 게놈 채굴

The chemical space covered by natural products is immense and widely unrecognized. Therefore, convenient methodologies to perform wide-ranging evaluation ...

Capillary Electrophoresis Mass Spectrometry Approaches for Characterization of the Protein and Metabolite Corona Acquired by Nanomaterials

나노 물질에 의해 획득 된 단백질과 대사 산물 코로나특성화를위한 모세관 전기 전구 질량 분광법 접근법

The adsorption of biomolecules from surrounding biological matrices to the surface of nanomaterials (NMs) to form the corona has been of interest for the ...