Name: the use of mixed reality in custom-made revision hip arthroplasty: a first case report
Uploaded: 2022-08-04T12:45:00
Description: Watch this Scientific Journal Video about The Use of Mixed Reality in Custom-Made Revision Hip Arthroplasty: A First Case Report at JoVE.com

Not applicable.
The study was carried out as part of a non-commercial cooperation.

The protocol follows guidelines of the Human Research Ethics Committee of the Medical University of Warsaw. The patient gave informed consent to the procedure and acknowledged the fact that it will be recorded. The patient agreed to that prior to the procedure.
NOTE: The basic criterion for including the patient in the surgery project was the necessity to intervene because of the anatomical dysfunction, which made it impossible to use a standard implant. Mixed reality was aimed at better place...

Primary and revision hip arthroplasty may require personalization to ensure effectiveness of treatment. However, the use of custom implants requires longer preparation for surgery compared to standard procedures. Custom-made 3D printed implants are the solution that gives a chance to restore function in non-typical patients whose disease has caused significant bone destruction29. Standard prostheses are insufficient due to advanced degenerative disease developing rapidly, bone defects caused by pr...

The technology of three-dimensional (3D) printing and visualization of complex structures is rapidly growing in various fields of medicine. These include cardiovascular surgery, otorhinolaryngology, maxillofacial surgery, and, above all, orthopedic surgery1,2,3,4,5. Currently, this technology is used in orthopedic surgery not only in the direct implementation of 3D printed elements, but also in surgical training, preoperative planning, or intraoperative navigation6,7,8.
Total hip arthroplasty (THA) and total knee arthroplasty (TKA) are one of the most frequently performed orthopedic surgical procedures worldwide. Due to the significant improvement in the patient&#39;s quality of life, THA had been described in a previous publication as the &#34;surgery of the century&#34;9. In Poland, 49.937 THA and 30.615 TKA were performed in 201910. As life expectancy increases, there is an upward trend in the projected number of hip and knee arthroplasty surgeries. Great efforts have been made to improve implant design, surgical technique, and postoperative care. These advances led to a better chance of restoring patient function and reducing the risk of complications11,12,13,14.
However, the big challenge currently faced by orthopedic surgeons worldwide is working with non-standard patients whose anatomical defects in the hip joint make it very difficult or even impossible to implement an off-the-shelf implant15. Bone loss may be due to significant trauma, progressive degenerative osteoarthritis with an acetabular protrusion, developmental hip dysplasia, primary bone cancer, or metastasis16,17,18,19,20. The problem of implant selection specifically concerns patients who are at risk of multiple revisions, sometimes also requiring unconventional treatment. In such cases, a very promising solution is an additive-made 3D printed implant created for a specific patient and bone defect, allowing for a very precise anatomical fit20.
In the field of arthroplasty, precise implant and its sustainable fixation are crucial. Progress in preoperative and intraoperative 3D visualization has resulted in excellent solutions as augmented and mixed reality21,22,23,24. Intraoperative use of bone and implant computed tomography (CT) holograms may allow better prosthesis placement than conventional radiography images. This emerging technology may increase the chances of therapy effectiveness and reduce the risk of neurovascular complications21,25.
This case report concerns a patient subjected to hip revision surgery due to aseptic loosening. To address significant bone loss caused by multiple implant failures, the custom-made 3D printed acetabular implant was used. During the procedure, we used mixed reality to visualize the implant position to avoid damaging the at-risk neurovascular structures. Application implemented to mixed reality headset allows giving voice and gesture commands, making it possible to use it in sterile conditions during the surgical procedure.
A 57-year-old woman was admitted to the department with a preliminary diagnosis: loosening of the left hip&#39;s acetabular component. The patient&#39;s disease history was extensive. Throughout her life, she underwent numerous surgical procedures of the hip joint. The first treatment was hip resurfacing due to osteoarthritis caused by hip dysplasia (1977-15 years old), the second was a total hip arthroplasty due to implant loosening (1983-21 years old), and other two revision surgeries (1998, 2000-37 and 39 years old). Moreover, the patient was suffering from spastic left-sided hemiplegia caused by childhood cerebral palsy, and she was repeatedly operated due to left clubfoot deformity. She was also burdened with osteoarthritis of the thoracolumbar spine, carpal tunnel syndrome, and well-controlled arterial hypertension. The final diagnosis preceding the qualification for the next procedure was the pain and increasing function limitation caused by loosening of the left hip&#39;s acetabular component. The patient was highly motivated, physically active, and coping with disability.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>CarnaLifeHolo v. 1.5.2</td>
			<td>MedApp S.A.</td>
			<td></td>
			<td></td>
		</tr>
		<tr>
			<td>Custom-Made implant type Triflanged Acetabular Component</td>
			<td>BIOMET</td>
			<td>REF PM0001779</td>
			<td></td>
		</tr>
		<tr>
			<td>Head Constrained Modular Head + 9mm Neck for cone 12/14, Co-Cr-Mo, size 36mm</td>
			<td>BIOMET</td>
			<td>REF 14-107021</td>
			<td></td>
		</tr>
		<tr>
			<td>Polyethylene insert Freedom Ringloc-X Costrained Linear Ringloc-X 58mm for head 36mm / 10 *</td>
			<td>BIOMET</td>
			<td>REF 11-263658</td>
			<td></td>
		</tr>
	</tbody>
</table>

the use of mixed reality in custom-made revision hip arthroplasty: a first case report

The technology of 3D printing and visualization of anatomical structures is rapidly growing in various fields of medicine. A custom-made implant and mixed reality were used to perform complex revision hip arthroplasty in January 2019. The use of mixed reality allowed for a very good visualization of the structures and resulted in precise implant fixation. According to the authors' knowledge, this is the first described case report of the combined use of these two innovations. The diagnosis preceding the qualification for the procedure was the loosening of the left hip's acetabular component. Mixed reality headset and holograms prepared by engineers were used during the surgery. The operation was successful, and it was followed by early verticalization and patient rehabilitation. The team sees opportunities for technology development in joint arthroplasty, trauma, and orthopedic oncology.

Image preprocessing 
Binary masks of the pelvic bone, femur, and endoprosthesis were semi-automatically segmented from CT DICOM images by experienced radiologic technologists using thresholding and region growing algorithms with available software33. The prepared label maps were also manually corrected by a radiologist. Label maps were used to enhance the visualization by adding them to the CT scan in the next step. This approach made it possible to merge the volumetric rende...

Watch this Scientific Journal Video about The Use of Mixed Reality in Custom-Made Revision Hip Arthroplasty: A First Case Report at JoVE.com

The Use of Mixed Reality in Custom-Made Revision Hip Arthroplasty: A First Case Report

A complex revision hip arthroplasty was performed using a custom-made implant and mixed reality technology. According to the authors&#39; knowledge, this is the first report of such procedure described in the literature.

The technology of 3D printing and visualization of anatomical structures is rapidly growing in various fields of medicine. A custom-made implant and mixed ...

Research

JoVE Journal

Medicine

Reverse Total Shoulder Arthroplasty

Reverse total shoulder arthroplasty was initially approved for use in rotator cuff arthropathy and well as chronic pseudoparalysis without arthritis in ...

In vivo Dual Substrate Bioluminescent Imaging

In vivo Dual Substrate Bioluminescent Imaging

Our understanding of how and when breast cancer cells transit from established primary tumors to metastatic sites has increased at an exceptional rate ...

Isolation of Soluble and Insoluble PrP Oligomers in the Normal Human Brain

The central event in the pathogenesis of prion diseases involves a conversion of the host-encoded cellular prion protein PrPC into its pathogenic isoform ...

Measuring Frailty in HIV-infected Individuals. Identification of Frail Patients is the First Step to Amelioration and Reversal of Frailty

A simple, validated protocol consisting of a battery of tests is available to identify elderly patients with frailty syndrome. This syndrome of decreased ...

Flexible Colonoscopy in Mice to Evaluate the Severity of Colitis and Colorectal Tumors Using a Validated Endoscopic Scoring System

The use of modern endoscopy for research purposes has greatly facilitated our understanding of gastrointestinal pathologies. In particular, experimental ...

Intrarenal Injection of Escherichia coli in a Rat Model of Pyelonephritis

Intrarenal Injection of Escherichia coli in a Rat Model of Pyelonephritis

Pyelonephritis is a bacterial infection of the kidney and is most commonly caused by Escherichia coli. Recurrent infections can cause significant renal ...

Novel Diagnostics in Revision Arthroplasty: Implant Sonication and Multiplex Polymerase Chain Reaction

In orthopedic patients, foreign body-associated infections, especially periprosthetic joint infections (PJIs), are a devastating complication of ...

Ultrasound-guided Intracardiac Injection of Human Mesenchymal Stem Cells to Increase Homing to the Intestine for Use in Murine Models of Experimental Inflammatory Bowel Diseases

Crohn&#39;s disease (CD) is a common chronic inflammatory disease of the small and large intestines. Murine and human mesenchymal stem cells (MSCs) have ...

Re-Arterialized Rat Partial Liver Transplantation with an in vivo Vessel-Oriented 70% Hepatectomy

Re-Arterialized Rat Partial Liver Transplantation with an in vivo Vessel-Oriented 70% Hepatectomy

Split liver transplantation and living liver donor liver transplantation were developed in the clinic to utilize liver organs in a more efficient manner. ...

Regenerative Therapy by Suprachoroidal Cell Autograft in Dry Age-related Macular Degeneration: Preliminary In Vivo Report

Regenerative Therapy by Suprachoroidal Cell Autograft in Dry Age-related Macular Degeneration: Preliminary In Vivo Report

This study is aimed at examining whether a suprachoroidal graft of autologous cells can improve best corrected visual acuity (BCVA) and responses to ...