وأيد هذا العمل من قبل جمعية ماكس بلانك، والمركز الألماني لأبحاث السرطان، وجامعة توبنغن، وBundesministerium FÜR Bildung اوند Forschung (منح رقم 0312040). نشكر ادوارد هيرمان لمساعدتنا أتمتة تحليل البيانات منحنى القوة والدكتور جاكوب Suckale للقراءة متأنية لهذه المخطوطة.

<ol>
	<li>Binnig, G., Quate, C. F., Gerber, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atomic+Force+Microscope.">Atomic Force Microscope.</a> Phys. Rev. Lett. 56, 930-933 (1986).</li><li>Hansma, P. K., Elings, V. B., Marti, O., Bracker, C. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scanning+Tunneling+Microscopy+and+Atomic+Force+Microscopy:+Application+to+Biology+and+Technology.">Scanning Tunneling Microscopy and Atomic Force Microscopy: Application to Biology and Technology.</a> Science. 242, 209-216 (1988).</li><li>Gaczynska, M., Osmulski, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AFM+of+biological+complexes:+What+can+we+learn.">AFM of biological complexes: What can we learn.</a> Curr, Opin. Colloid In. 13, 351-367 (2008).</li><li>Goksu, E. I., Vanegas, J. M., Blanchette, C. D., Lin, W. -. C., Longo, M. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AFM+for+structure+and+dynamics+of+biomembranes.">AFM for structure and dynamics of biomembranes.</a> BBA-Biomembranes. 1788, 254-266 (2009).</li><li>Muller, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=AFM:+A+Nanotool+in+Membrane+Biology.">AFM: A Nanotool in Membrane Biology.</a> Biochemistry-US. 47, 7986-7998 (2008).</li><li>Redondo-Morata, L., Giannotti, M. I., Sanz, F., Bar&#243;, A. M., Reifenberger, R. G., Sanz, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Atomic Force Microscopy in Liquid: Biological Applications. , (2012).</li><li>Castellana, E. T., Cremer, P. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Solid+supported+lipid+bilayers:+From+biophysical+studies+to+sensor+design.">Solid supported lipid bilayers: From biophysical studies to sensor design.</a> Surf. Sci. Rep. 61, 429-444 (2006).</li><li>Frederix, P. L. T. M., Bosshart, P. D., Engel, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atomic+Force+Microscopy+of+Biological+Membranes.">Atomic Force Microscopy of Biological Membranes.</a> Biophys. J. 96, 329-338 (2009).</li><li>Mennicke, U., Salditt, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+Solid-Supported+Lipid+Bilayers+by+Spin-Coating.">Preparation of Solid-Supported Lipid Bilayers by Spin-Coating.</a> Langmuir. 18, 8172-8177 (2002).</li><li>Raviakine, I., Brisson, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+of+Supported+Phospholipid+Bilayers+from+Unilamellar+Vesicles+Investigated+by+Atomic+Force+Microscopy.">Formation of Supported Phospholipid Bilayers from Unilamellar Vesicles Investigated by Atomic Force Microscopy.</a> Langmuir. 16, 1806-1815 (2000).</li><li>Chiantia, S., Ries, J., Kahya, N., Schwille, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combined+AFM+and+Two-Focus+SFCS+Study+of+Raft-Exhibiting+Model+Membranes.+.">Combined AFM and Two-Focus SFCS Study of Raft-Exhibiting Model Membranes. .</a> ChemPhysChem. 7, 2409-2418 (2006).</li><li>Unsay, J., Cosentino, K., Subburaj, Y., Garcia-Saez, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cardiolipin+effects+on+membrane+structure+and+dynamics.">Cardiolipin effects on membrane structure and dynamics.</a> Langmuir. 29, 15878-15887 (2013).</li><li>Dom&#232;nech, &. #. 2. 1. 0. ;., Sanz, F., Montero, M. T., Hern&#225;ndez-Borrell, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermodynamic+and+structural+study+of+the+main+phospholipid+components+comprising+the+mitochondrial+inner+membrane.">Thermodynamic and structural study of the main phospholipid components comprising the mitochondrial inner membrane.</a> BBA-Biomembranes. 1758, 213-221 (2006).</li><li>Dom&#232;nech, &. #. 2. 1. 0. ;., Morros, A., Caba&#241;as, M. E., Teresa Montero, M., Hern&#225;ndez-Borrell, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Supported+planar+bilayers+from+hexagonal+phases.">Supported planar bilayers from hexagonal phases.</a> BBA-Biomembranes. 1768, 100-106 (2007).</li><li>Garcia-Saez, A. J., Chiantia, S., Schwille, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+line+tension+on+the+lateral+organization+of+lipid+membranes.">Effect of line tension on the lateral organization of lipid membranes.</a> J Biol Chem. 282, 33537-33544 (2007).</li><li>Alessandrini, A., Seeger, H. M., Caramaschi, T., Facci, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamic+Force+Spectroscopy+on+Supported+Lipid+Bilayers:+Effect+of+Temperature+and+Sample+Preparation.">Dynamic Force Spectroscopy on Supported Lipid Bilayers: Effect of Temperature and Sample Preparation.</a> Biophys. J. 103, 38-47 (2012).</li><li>Butt, H. -. J., Franz, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rupture+of+molecular+thin+films+observed+in+atomic+force+microscopy+I.+Theory.">Rupture of molecular thin films observed in atomic force microscopy I. Theory.</a> Physical Review E. 66, 031601 (2002).</li><li>Garcia-Manyes, S., Oncins, G., Sanz, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+Temperature+on+the+Nanomechanics+of+Lipid+Bilayers+Studied+by+Force+Spectroscopy.">Effect of Temperature on the Nanomechanics of Lipid Bilayers Studied by Force Spectroscopy.</a> Biophys. J. 89, 4261-4274 (2005).</li><li>Chiantia, S., Kahya, N., Schwille, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Raft+domain+reorganization+driven+by+short-+and+long-chain+ceramide:+a+combined+AFM+and+FCS+study.">Raft domain reorganization driven by short- and long-chain ceramide: a combined AFM and FCS study.</a> Langmuir. 23, 7659-7665 (2007).</li><li>Canale, C., Jacono, M., Diaspro, A., Dante, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Force+spectroscopy+as+a+tool+to+investigate+the+properties+of+supported+lipid+membranes.">Force spectroscopy as a tool to investigate the properties of supported lipid membranes.</a> Microsc. Res. Techniq. 73, 965-972 (2010).</li><li>Garc&#237;a-S&#225;ez, A. J., Chiantia, S., Salgado, J., Schwille, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pore+Formation+by+a+Bax-Derived+Peptide:+Effect+on+the+Line+Tension+of+the+Membrane+Probed+by+AFM.">Pore Formation by a Bax-Derived Peptide: Effect on the Line Tension of the Membrane Probed by AFM.</a> Biophys. J. 93, 103-112 (2007).</li><li>Moreno Flores, S., Toca-Herrera, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+new+future+of+scanning+probe+microscopy:+Combining+atomic+force+microscopy+with+other+surface-sensitive+techniques,+optical+microscopy+and+fluorescence+techniques.">The new future of scanning probe microscopy: Combining atomic force microscopy with other surface-sensitive techniques, optical microscopy and fluorescence techniques.</a> Nanoscale. 1, 40-49 (2009).</li><li>Simons, K., Vaz, W. L. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Model+Systems,+Lipid+Rafts,+and+Cell+Membranes1.">Model Systems, Lipid Rafts, and Cell Membranes1.</a> Annu. Rev. Bioph. Biom. 33, 269-295 (2004).</li><li>Pike, L. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rafts+defined:+a+report+on+the+Keystone+symposium+on+lipid+rafts+and+cell+function.">Rafts defined: a report on the Keystone symposium on lipid rafts and cell function.</a> The Journal of Lipid Research. 47, 1597-1598 (2006).</li><li>Kahya, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Probing+Lipid+Mobility+of+Raft-exhibiting+Model+Membranes+by+Fluorescence+Correlation+Spectroscopy.">Probing Lipid Mobility of Raft-exhibiting Model Membranes by Fluorescence Correlation Spectroscopy.</a> J. Biol. Chem. 278, 28109-28115 (2003).</li><li>Akbarzadeh, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Liposome:+classification,+preparation+and+applications.">Liposome: classification, preparation and applications.</a> Nanoscale Research Letters. 8, 102 (2013).</li><li>Butt, H. -. J., Jaschke, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Calculation+of+thermal+noise+in+atomic+force+microscopy.">Calculation of thermal noise in atomic force microscopy.</a> Nanotechnology. 6, 1-7 (1995).</li><li>Chon, J. W. M., Mulvaney, P., Sader, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+validation+of+theoretical+models+for+the+frequency+response+of+atomic+force+microscope+cantilever+beams+immersed+in+fluids.">Experimental validation of theoretical models for the frequency response of atomic force microscope cantilever beams immersed in fluids.</a> Journal of Applied Physics. 87, 3973 (2000).</li><li>Sader, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Frequency+response+of+cantilever+beams+immersed+in+viscous+fluids+with+applications+to+the+atomic+force+microscope.">Frequency response of cantilever beams immersed in viscous fluids with applications to the atomic force microscope.</a> Journal of Applied Physics. 84, 64 (1998).</li><li>Sader, J. E., Pacifico, J., Green, C. P., Mulvaney, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=General+scaling+law+for+stiffness+measurement+of+small+bodies+with+applications+to+the+atomic+force+microscope.">General scaling law for stiffness measurement of small bodies with applications to the atomic force microscope.</a> Journal of Applied Physics. 97, 12490310 (2005).</li><li>Canale, C., Torre, B., Ricci, D., Braga, P. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recognizing+and+avoiding+artifacts+in+atomic+force+microscopy+imaging.">Recognizing and avoiding artifacts in atomic force microscopy imaging.</a> Methods Mol Biol. 736, 31-43 (2011).</li><li>Lee, M. -. T., Chen, F. -. Y., Huang, H. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Energetics+of+Pore+Formation+Induced+by+Membrane+Active+Peptides.">Energetics of Pore Formation Induced by Membrane Active Peptides.</a> Biochemistry-US. 43, 3590-3599 (2004).</li><li>Henriksen, J. R., Ipsen, J. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Measurement+of+membrane+elasticity+by+micro-pipette+aspiration.">Measurement of membrane elasticity by micro-pipette aspiration.</a> The European physical journal. E, Soft matter. 14, 149-167 (2004).</li><li>Nichols-Smith, S., Teh, S. -. Y., Kuhl, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thermodynamic+and+mechanical+properties+of+model+mitochondrial+membranes.">Thermodynamic and mechanical properties of model mitochondrial membranes.</a> BBA-Biomembranes. 1663, 82-88 (2004).</li><li>Tian, A., Johnson, C., Wang, W., Baumgart, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Line+Tension+at+Fluid+Membrane+Domain+Boundaries+Measured+by+Micropipette+Aspiration.">Line Tension at Fluid Membrane Domain Boundaries Measured by Micropipette Aspiration.</a> Phys. Rev. Lett. 98, (2007).</li><li>Rigaud, J. -. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Membrane+proteins:+functional+and+structural+studies+using+reconstituted+proteoliposomes+and+2-D+crystals.">Membrane proteins: functional and structural studies using reconstituted proteoliposomes and 2-D crystals.</a> Brazilian Journal of Medical and Biological Research. 35, 753-766 (2002).</li></ol>

تعلن الكتاب أنه ليس لديهم المصالح المالية المتنافسة.

SLBs تتألف من DOPC: SM: تشول (2: 2: 1) تشكلت على الميكا بعد الامتزاز الحويصلة وتمزق الناجمة عن كلوريد الكالسيوم. هذه التركيبة الدهنية فصل إلى L د وL س مراحل. وأثرى مرحلة L س في سفينغوميالين والكوليسترول وأقل السائل / أكثر لزوجة (الشكل 1A) من د مرحلة ...

قوة الذرية المجهر (AFM) يولد صورة لسطح عن طريق المسح الضوئي عبر منطقة من العينة باستخدام ناتئ مع طرف حاد جدا 1. حركة ناتئ المسابير طوبولوجيا سطح العينة. وقد تم تطبيق AFM على نطاق واسع لجزيئات البيولوجية - بما في ذلك البروتينات والحمض النووي، والأغشية، نظرا لتنوعها في تحليل عينات الثابتة في الهواء أو دولة شبه الأم في السائل 2-5. وبصرف النظر عن قدرتها التصوير عالية الدقة في نطاق نانومتر، يعمل ناتئ AFM بمثابة ربيع للتحقيق القوات التفاعل (التصاق والتنافر) والخواص الميكانيكية للعينة 5،6. هذا هو المعروف باسم قوة التحليل الطيفي. في هذا الوضع، وتحقيق نهج أول العينة ويمارس قوة على ذلك، ومن ثم تراجع حتى أنه يفقد الاتصال مع العينة (الشكل 1A). تظهر منحنيات ولدت القوة كدالة للمسافة ناتئ لكل من التطبيقصرصور وتراجع. العديد من الخصائص بما في ذلك معامل المرونة لقياس صلابة من المواد، وقوات التصاق يمكن أن تستمد. طبقات ثنائية الدهون المعتمدة هي الأغشية البيولوجية نموذج الكذب على رأس دعم قوي - عادة الميكا، والزجاج البورسليكات، السيليكا تنصهر فيها، أو المؤكسد السيليكون 7. انهم مستعدون باستخدام تقنيات مختلفة مثل ترسب حويصلة، طريقة انجميور-بلودجيت وتدور طلاء 8،9. وقد استخدم التصوير AFM لمتابعة تشكيل هذه طبقات ثنائية بدعم 10، وتحقيق مختلف الهياكل التي شكلتها أغشية تركيبات مختلفة 11-15. أداء قوة التحليل الطيفي على النتائج طبقات ثنائية المعتمدة في قمة في منحنى النهج. هذه الذروة تشير إلى القوة اللازمة لاختراق طبقة ثنائية، ويسمى القوة الخارقة. كما يمكن قياس سمك طبقة ثنائية باستخدام منحنى القوة 6. قوة اختراق نموذجية من طبقات ثنائيةتتراوح ما بين 1-50 ن ن 6. هذه الخصائص تعتمد على التعبئة الدهون (المرحلة سائل أو هلام) وهيكل (أسيل طول السلسلة ودرجة التشبع) وتعديلها من قبل غشاء نشط وكلاء 16. وقد شرحت النظرية وراء القطيعة 17 والمعلمات تجريبية أخرى مثل النعومة ناتئ، دائرة نصف قطرها طرف وسرعة نهج تؤثر أيضا على قوة اختراق 15،16،18. وقد استخدمت القوة الطيفي لتحليل خصائص مراحل مختلفة الدهون 11،19، والتغيرات التي تعتمد على تكوين 12،20، فضلا عن آثار الجزيئات الحيوية الأخرى، مثل الببتيدات، على استقرار الغشاء 21. التوجه شقة من طبقات ثنائية معتمد من المفيد للجمع بين AFM مع وسائل أخرى مثل مأكل سطح الرنين 22 ومضان المجهر 11،19 لتوصيف هيكل وخصائص الأغشية بشكل أفضل. هذا بروتو فيديو تفصيليوالمقصود العقيد لإعداد طبقات ثنائية الدهون تدعم استغلال ترسب الحويصلة وتحليلها مع AFM وقوة التحليل الطيفي. في حين الحويصلات من مختلف الأحجام يمكن استخدامها لإعداد طبقات ثنائية، ويركز هذا البروتوكول على الحويصلات unilamellar الصغيرة والكبيرة. وتميزت بدعم طبقات ثنائية تلك المرحلة تفصل في أمر السائل (L س) والسائلة المختلين (L د) مراحل 11،15. ويتكون الغشاء من دى oleoyl-فسفاتيديل (DOPC)، سفينغوميالين (SM)، والكولسترول (شول) في 2: 2: 1 النسبة. هذه نماذج تكوين الطوافات الدهنية، والتي من المقترح أن تتصرف كما منابر هامة للاتجار البروتين والفرز، مما يشير الى الخلايا والعمليات الخلوية الأخرى 23،24.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>1,2-dioleoyl-sn-glycero-3-phosphocholine</td>
			<td>Avanti Polar Lipids, Inc.</td>
			<td>850375P</td>
			<td>Comes as lyophilized powder in sealed vials. Dissolve all powder in chloroform upon opening. Store extra as dried lipid films, under inert atmosphere, at -20&#176;C. For more information on storage and handling visit http://www.avantilipids.com/index.php?option=com_content&#38;view=article&#38;id=1679&#38;Itemid=398</td>
		</tr>
		<tr>
			<td>Sphingomyelin (Brain, Porcine)</td>
			<td>Avanti Polar Lipids, Inc.</td>
			<td>860062P</td>
			<td>Comes as lyophilized powder in large sealed plastic containers. Dissolve a spatula point of powder powder in chloroform upon opening. Store extra as dried lipid films, under inert atmosphere, at -20&#176;C.&#160; For more information on storage and handling visit http://www.avantilipids.com/index.php?option=com_content&#38;view=article&#38;id=1679&#38;Itemid=398</td>
		</tr>
		<tr>
			<td>Cholesterol</td>
			<td>Avanti Polar Lipids, Inc.</td>
			<td>700000P</td>
			<td>Comes as lyophilized powder in large sealed plastic containers. Dissolve a spatula point of powder powder in chloroform upon opening. Store extra as dried lipid films, under inert atmosphere, at -20&#176;C.&#160; For more information on storage and handling visit http://www.avantilipids.com/index.php?option=com_content&#38;view=article&#38;id=1679&#38;Itemid=398</td>
		</tr>
		<tr>
			<td>Sodium chloride (NaCl), 99.8%</td>
			<td>Carl Roth GmbH + Co. KG</td>
			<td>9265.1</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium chloride (KCl), 88%</td>
			<td>Sigma</td>
			<td>P9541</td>
			<td></td>
		</tr>
		<tr>
			<td>Sodium hydrogenphosphate (Na2HPO4), &#62;99%</td>
			<td>AppliChem GmbH</td>
			<td>A1046</td>
			<td></td>
		</tr>
		<tr>
			<td>Potassium dihydrogenphosphate (KH2PO4), 99%</td>
			<td>Carl Roth GmbH + Co. KG</td>
			<td>3904.1</td>
			<td></td>
		</tr>
		<tr>
			<td>Calcium chloride dihydrate (CaCl2), molecular biology grade</td>
			<td>AppliChem GmbH</td>
			<td>A4689</td>
			<td></td>
		</tr>
		<tr>
			<td>HEPES, molecular biology grade</td>
			<td>AppliChem GmbH</td>
			<td>A3724</td>
			<td></td>
		</tr>
		<tr>
			<td>Glass coverslip, 24x60 mm, 1mm thickness</td>
			<td>Duran Group</td>
			<td>2355036</td>
			<td></td>
		</tr>
		<tr>
			<td>Mica blocks</td>
			<td>NSC Mica Exports Ltd.</td>
			<td></td>
			<td>These are mica pieces at least 1 sq. Inches in area and thickness randing from 0.006 inches to 0.016 inches. They are cut to a specific size by the company for shipping. Small mica discs can be punched from the mica blocks using the punch and die set.&#160; Always handle mica with gloves or tweezers.</td>
		</tr>
		<tr>
			<td>Punch and Die Set</td>
			<td>Precision Brand Products, Inc</td>
			<td>40105</td>
			<td></td>
		</tr>
		<tr>
			<td>Optical Adhesive</td>
			<td>Norland Products, Inc.</td>
			<td>NOA 88</td>
			<td>Liquid adhesive that hardens when cured under long wavelength UV light.&#160;</td>
		</tr>
		<tr>
			<td>Laboratory Equipment Grease</td>
			<td>Borer Chemie AG</td>
			<td>Glisseal N</td>
			<td></td>
		</tr>
		<tr>
			<td>Liposome Extruder</td>
			<td>Avestin</td>
			<td>LiposoFast-Basic</td>
			<td>As an alternative one can also look at offers from Northern Lipids, Inc.</td>
		</tr>
		<tr>
			<td>Adhesive Tape</td>
			<td>3M</td>
			<td>Scotch(R) Magic (TM) Tape 810 (1-inch)</td>
			<td></td>
		</tr>
		<tr>
			<td>Bath Sonicator</td>
			<td>Bandelin Sonorex Digitec</td>
			<td>DT-31</td>
			<td>No heating, Frequency: 35 kHz, Ultrasonic Peak Output: 160 W, HF Power: 40 W. http://www.bandelin.com/datenblaetter/dt/DT_31_H_1798d_DE_GB_FR_BANDELIN.pdf</td>
		</tr>
		<tr>
			<td>Silicon Nitride AFM Cantilever&#160;</td>
			<td>Bruker AFM Probes</td>
			<td>DNP-10</td>
			<td>Each cantilever has four tips and their nominal tip radius is 20 nm (with possible maximum at 60 nm). Based on the specifications, we use tip D with resonance frequency of 18 kHz, and nominal spring constant of 0.06 N/m.</td>
		</tr>
		<tr>
			<td>AFM</td>
			<td>JPK</td>
			<td>JPK Nanowizard II mounted on Zeiss Axiovert 200</td>
			<td></td>
		</tr>
	</tbody>
</table>

atomic force microscopy imaging and force spectroscopy of supported lipid bilayers

Atomic force microscopy (AFM) is a versatile, high-resolution imaging technique that allows visualization of biological membranes. It has sufficient magnification to examine membrane substructures and even individual molecules. AFM can act as a force probe to measure interactions and mechanical properties of membranes. Supported lipid bilayers are conventionally used as membrane models in AFM studies. In this protocol, we demonstrate how to prepare supported bilayers and characterize their structure and mechanical properties using AFM. These include bilayer thickness and breakthrough force. 
The information provided by AFM imaging and force spectroscopy help define mechanical and chemical properties of membranes. These properties play an important role in cellular processes such as maintaining cell hemostasis from environmental stress, bringing membrane proteins together, and stabilizing protein complexes.

طبقات ثنائية بدعم الدهون تتكون من DOPC: SM: تشول (2: 2: 1) تم تصويره في AFM (الشكل 2 AC). بسبب تركيبة الدهون، لوحظت SM / تشول الغنية L O و DOPC الغنية L د مراحل. يمكن الشخصى ارتفاع من التصوير AFM توفر معلومات هامة عن هيكل الغشاء. من خلال النظر في ملف الارتفاع، ويمكن قي?...

Watch this Scientific Journal Video about Atomic Force Microscopy Imaging and Force Spectroscopy of Supported Lipid Bilayers at JoVE.com

Atomic Force Microscopy Imaging and Force Spectroscopy of Supported Lipid Bilayers

We describe a protocol for preparation of supported lipid bilayers and its characterization using atomic force microscopy and force spectroscopy.

قوة الذرية المجهر التصوير وقوة التحليل الطيفي لدعم الدهن طبقات ثنائية

Atomic force microscopy (AFM) is a versatile, high-resolution imaging technique that allows visualization of biological membranes. It has sufficient ...

atomic-force-microscopy-imaging-force-spectroscopy-supported-lipid

Research

JoVE Journal

Bioengineering

14.6K Views.  Interfaculty Institute for Biochemistry. We describe a protocol for preparation of supported lipid bilayers and its characterization using atomic force microscopy and force spectroscopy.

Video: Atomic Force Microscopy Imaging and Force Spectroscopy of Supported Lipid Bilayers

Visualization of Recombinant DNA and Protein Complexes Using Atomic Force Microscopy

Atomic force microscopy (AFM) allows for the visualizing of individual proteins, DNA molecules, protein-protein complexes, and DNA-protein complexes. On the end of the microscope's cantilever is a nano-scale probe, which traverses image areas ranging from nanometers to micrometers, measuring the elevation of macromolecules resting on the substrate surface at any given point. Electrostatic forces cause proteins, lipids, and nucleic acids to loosely attach to the substrate in random orientations and permit imaging. The generated data resemble a topographical map, where the macromolecules resolve as three-dimensional particles of discrete sizes (Figure 1) 1,2. Tapping mode AFM involves the repeated oscillation of the cantilever, which permits imaging of relatively soft biomaterials such as DNA and proteins. One of the notable benefits of AFM over other nanoscale microscopy techniques is its relative adaptability to visualize individual proteins and macromolecular complexes in aqueous buffers, including near-physiologic buffered conditions, in real-time, and without staining or coating the sample to be imaged. 
The method presented here describes the imaging of DNA and an immunoadsorbed transcription factor (i.e. the glucocorticoid receptor, GR) in buffered solution (Figure 2). Immunoadsorbed proteins and protein complexes can be separated from the immunoadsorbing antibody-bead pellet by competition with the antibody epitope and then imaged (Figure 2A). This allows for biochemical manipulation of the biomolecules of interest prior to imaging. Once purified, DNA and proteins can be mixed and the resultant interacting complex can be imaged as well. Binding of DNA to mica requires a divalent cation 3,such as Ni2+ or Mg2+, which can be added to sample buffers yet maintain protein activity. Using a similar approach, AFM has been utilized to visualize individual enzymes, including RNA polymerase 4 and a repair enzyme 5, bound to individual DNA strands. These experiments provide significant insight into the protein-protein and DNA-protein biophysical interactions taking place at the molecular level. Imaging individual macromolecular particles with AFM can be useful for determining particle homogeneity and for identifying the physical arrangement of constituent components of the imaged particles. While the present method was developed for visualization of GR-chaperone protein complexes 1,2 and DNA strands to which the GR can bind, it can be applied broadly to imaging DNA and protein samples from a variety of sources.

A tapping mode atomic force microscope (AFM) method for the visualization of plasmid DNA, cytoplasmic proteins, and DNA-protein complexes is described. The method includes alternate approaches for preparing samples for AFM imaging following biochemical manipulation. DNA containing specific protein interacting regions are observed in near-physiologic buffer conditions.

التصور من الحمض النووي المؤتلف والمجمعات البروتين باستخدام الميكروسكوب القوة الذرية

Atomic force microscopy (AFM) allows for the visualizing of individual proteins, DNA molecules, protein-protein complexes, and DNA-protein complexes. On ...

Quantifying the Mechanical Properties of the Endothelial Glycocalyx with Atomic Force Microscopy

Our understanding of the interaction of leukocytes and the vessel wall during leukocyte capture is limited by an incomplete understanding of the mechanical properties of the endothelial surface layer. It is known that adhesion molecules on leukocytes are distributed non-uniformly relative to surface topography 3, that topography limits adhesive bond formation with other surfaces 9, and that physiological contact forces (&asymp; 5.0 &minus; 10.0 pN per microvillus) can compress the microvilli to as little as a third of their resting length, increasing the accessibility of molecules to the opposing surface 3, 7. We consider the endothelium as a two-layered structure, the relatively rigid cell body, plus the glycocalyx, a soft protective sugar coating on the luminal surface 6. It has been shown that the glycocalyx can act as a barrier to reduce adhesion of leukocytes to the endothelial surface 4. In this report we begin to address the deformability of endothelial surfaces to understand how the endothelial mechanical stiffness might affect bond formation. Endothelial cells grown in static culture do not express a robust glycocalyx, but cells grown under physiological flow conditions begin to approximate the glycocalyx observed in vivo 2. The modulus of the endothelial cell body has been measured using atomic force microscopy (AFM) to be approximately 5 to 20 kPa 5. The thickness and structure of the glycocalyx have been studied using electron microscopy 8, and the modulus of the glycocalyx has been approximated using indirect methods, but to our knowledge, there have been no published reports of a direct measurement of the glycocalyx modulus in living cells. In this study, we present indentation experiments made with a novel AFM probe on cells that have been cultured in conditions to maximize their glycocalyx expression to make direct measurements of the modulus and thickness of the endothelial glycocalyx.

The mechanical characteristics of endothelial glycocalyx were measured by indentation using micron sized spheres on AFM cantilevers. Endothelial cells were cultured in a custom chamber under physiological flow conditions to induce glycocalyx expression. Data were analyzed using a thin film model to determine the glycocalyx thickness and modulus.

قياس الخواص الميكانيكية للالكنان السكري غشائي مع مجهر القوة الذرية

Our  understanding of the interaction of leukocytes and the vessel wall during  leukocyte capture is limited by an incomplete understanding of the ...

Biosensor for Detection of Antibiotic Resistant Staphylococcus Bacteria

A structurally transformed lytic bacteriophage having a broad host range of Staphylococcus aureus strains and a penicillin-binding protein (PBP 2a) antibody conjugated latex beads have been utilized to create a biosensor designed for discrimination of methicillin resistant (MRSA) and sensitive (MSSA) S. aureus species 1,2. The lytic phages have been converted into phage spheroids by contact with water-chloroform interface. Phage spheroid monolayers have been moved onto a biosensor surface by Langmuir-Blodgett (LB) technique 3. The created biosensors have been examined by a quartz crystal microbalance with dissipation tracking (QCM-D) to evaluate bacteria-phage interactions. Bacteria-spheroid interactions led to reduced resonance frequency and a rise in dissipation energy for both MRSA and MSSA strains. After the bacterial binding, these sensors have been further exposed to the penicillin-binding protein antibody latex beads. Sensors analyzed with MRSA responded to PBP 2a antibody beads; although sensors inspected with MSSA gave no response. This experimental distinction determines an unambiguous discrimination between methicillin resistant and sensitive S. aureus strains. Equally bound and unbound bacteriophages suppress bacterial growth on surfaces and in water suspensions. Once lytic phages are changed into spheroids, they retain their strong lytic activity and show high bacterial capture capability. The phage and phage spheroids can be utilized for testing and sterilization of antibiotic resistant microorganisms. Other applications may include use in bacteriophage therapy and antimicrobial surfaces.

Lytic phage biosensors and antibody beads are able to discriminate between methicillin resistant (MRSA) and sensitive staphylococcus bacteria. The phages were immobilized by a Langmuir-Blodgett method onto a surface of a quartz crystal microbalance sensor and worked as broad range staphylococcus probes. Antibody beads recognize MRSA.

جهاز الاستشعار البيولوجي للكشف عن المضادات الحيوية البكتيريا العنقودية الذهبية المقاومة لل

A structurally transformed lytic bacteriophage having a broad host range of Staphylococcus aureus strains and a penicillin-binding protein (PBP 2a) ...

Measuring the Mechanical Properties of Living Cells Using Atomic Force Microscopy

Mechanical properties of cells and extracellular matrix (ECM) play important roles in many biological processes including stem cell differentiation, tumor formation, and wound healing. Changes in stiffness of cells and ECM are often signs of changes in cell physiology or diseases in tissues. Hence, cell stiffness is an index to evaluate the status of cell cultures. Among the multitude of methods applied to measure the stiffness of cells and tissues, micro-indentation using an Atomic Force Microscope (AFM) provides a way to reliably measure the stiffness of living cells. This method has been widely applied to characterize the micro-scale stiffness for a variety of materials ranging from metal surfaces to soft biological tissues and cells. The basic principle of this method is to indent a cell with an AFM tip of selected geometry and measure the applied force from the bending of the AFM cantilever. Fitting the force-indentation curve to the Hertz model for the corresponding tip geometry can give quantitative measurements of material stiffness. This paper demonstrates the procedure to characterize the stiffness of living cells using AFM. Key steps including the process of AFM calibration, force-curve acquisition, and data analysis using a MATLAB routine are demonstrated. Limitations of this method are also discussed.

This paper demonstrates a protocol to characterize the mechanical properties of living cells by means of microindentation using an Atomic Force Microscope (AFM).

قياس الخواص الميكانيكية للخلايا الحية باستخدام المجهر القوة الذرية

Mechanical  properties of cells and extracellular matrix (ECM) play important roles in many  biological processes including stem cell differentiation, ...

Investigating Receptor-ligand Systems of the Cellulosome with AFM-based Single-molecule Force Spectroscopy

Cellulosomes are discrete multienzyme complexes used by a subset of anaerobic bacteria and fungi to digest lignocellulosic substrates. Assembly of the enzymes onto the noncatalytic scaffold protein is directed by interactions among a family of related receptor-ligand pairs comprising interacting cohesin and dockerin modules. The extremely strong binding between cohesin and dockerin modules results in dissociation constants in the low picomolar to nanomolar range, which may hamper accurate off-rate measurements with conventional bulk methods. Single-molecule force spectroscopy (SMFS) with the atomic force microscope measures the response of individual biomolecules to force, and in contrast to other single-molecule manipulation methods (i.e.&#160;optical tweezers), is optimal for studying high-affinity receptor-ligand interactions because of its ability to probe the high-force regime (&#62;120 pN). Here we present our complete protocol for studying cellulosomal protein assemblies at the single-molecule level. Using a protein topology derived from the native cellulosome, we worked with enzyme-dockerin and carbohydrate binding module-cohesin (CBM-cohesin) fusion proteins, each with an accessible free thiol group at an engineered cysteine residue. We present our site-specific surface immobilization protocol, along with our measurement and data analysis procedure for obtaining detailed binding parameters for the high-affinity complex. We demonstrate how to quantify single subdomain unfolding forces, complex rupture forces, kinetic off-rates, and potential widths of the binding well. The successful application of these methods in characterizing the cohesin-dockerin interaction responsible for assembly of multidomain cellulolytic complexes is further described.

Cellulosomes are multienzyme complexes designed for digesting cellulose. AFM-based SMFS was used to study the mechanical properties and folding configuration of cellulosome-associated protein assemblies. We present a complete workflow for protein immobilization, data acquisition, and data analysis to study the interactions of individual receptor-ligand complexes involved in cellulosome assembly.

Cellulosomes are discrete multienzyme complexes used by a subset of anaerobic bacteria and fungi to digest lignocellulosic substrates. Assembly of the ...

Preparation of Mica Supported Lipid Bilayers for High Resolution Optical Microscopy Imaging

Supported lipid bilayers (SLBs) are widely used as a model for studying membrane properties (phase separation, clustering, dynamics) and its interaction with other compounds, such as drugs or peptides. However SLB characteristics differ depending on the support used. 
Commonly used techniques for SLB imaging and measurements are single molecule fluorescence microscopy, FCS and atomic force microscopy (AFM). Because most optical imaging studies are carried out on a glass support, while AFM requires an extremely flat surface (generally mica), results from these techniques cannot be compared directly, since the charge and smoothness properties of these materials strongly influence diffusion. Unfortunately, the high level of manual dexterity required for the cutting and gluing thin slices of mica to the glass slide presents a hurdle to routine use of mica for SLB preparation. Although this would be the method of choice, such prepared mica surfaces often end up being uneven (wavy) and difficult to image, especially with small working distance, high numerical aperture lenses. Here we present a simple and reproducible method for preparing thin, flat mica surfaces for lipid vesicle deposition and SLB preparation. Additionally, our custom made chamber requires only very small volumes of vesicles for SLB formation. The overall procedure results in the efficient, simple and inexpensive production of high quality lipid bilayer surfaces that are directly comparable to those used in AFM studies.

We present a method of preparing mica supported lipid bilayers for high resolution microscopy. Mica is transparent and flat on an atomic scale, but rarely used in imaging because of handling difficulties; our preparation results in even deposition of the mica sheet, and reduces the material used in bilayer preparation.

إعداد ميكا المدعومة الدهون طبقات ثنائية لارتفاع القرار المجهر الضوئي التصوير

Supported lipid bilayers (SLBs) are widely used as a model for studying membrane properties (phase separation, clustering, dynamics) and its interaction ...

Surface Potential Measurement of Bacteria Using Kelvin Probe Force Microscopy

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. Kelvin probe force microscopy (KPFM) is a module of atomic force microscopy (AFM) that measures the contact potential difference between surfaces at the nano-scale. The combination of KPFM with AFM allows for the simultaneous generation of surface potential and topographical maps of biological samples such as bacterial cells. Here, we employ KPFM to examine the effects of surface potential on microbial adhesion to medically relevant surfaces such as stainless steel and gold. Surface potential maps revealed differences in surface potential for microbial membranes on different material substrates. A step-height graph was generated to show the difference in surface potential at a boundary area between the substrate surface and microorganisms. Changes in cellular membrane surface potential have been linked with changes in cellular metabolism and motility. Therefore, KPFM represents a powerful tool that can be utilized to examine the changes of microbial membrane surface potential upon adhesion to various substrate surfaces. In this study, we demonstrate the procedure to characterize the surface potential of individual methicillin-resistant Staphylococcus aureus USA100 cells on stainless steel and gold using KPFM.

Here, we present a protocol explaining the use of Kelvin probe force microscopy as a tool for generating high resolution nano-scale surface potential maps. This tool was applied to assess the role of surface potential on the binding capacity of microorganisms to substrate surfaces.

سطح القياس المحتمل للبكتيريا عن طريق كلفن التحقيق قوة المجهر

Surface potential is a commonly overlooked physical characteristic that plays a dominant role in the adhesion of microorganisms to substrate surfaces. ...

Novel Atomic Force Microscopy Based Biopanning for Isolation of Morphology Specific Reagents against TDP-43 Variants in Amyotrophic Lateral Sclerosis

Because protein variants play critical roles in many diseases including TDP-43 in Amyotrophic Lateral Sclerosis (ALS), alpha-synuclein in Parkinson&#8217;s disease and beta-amyloid and tau in Alzheimer&#8217;s disease, it is critically important to develop morphology specific reagents that can selectively target these disease-specific protein variants to study the role of these variants in disease pathology and for potential diagnostic and therapeutic applications. We have developed novel atomic force microscopy (AFM) based biopanning techniques that enable isolation of reagents that selectively recognize disease-specific protein variants. There are two key phases involved in the process, the negative and positive panning phases. During the negative panning phase, phages that are reactive to off-target antigens are eliminated through multiple rounds of subtractive panning utilizing a series of carefully selected off-target antigens. A key feature in the negative panning phase is utilizing AFM imaging to monitor the process and confirm that all undesired phage particles are removed. For the positive panning phase, the target antigen of interest is fixed on a mica surface and bound phages are eluted and screened to identify phages that selectively bind the target antigen. The target protein variant does not need to be purified providing the appropriate negative panning controls have been used. Even target protein variants that are only present at very low concentrations in complex biological material can be utilized in the positive panning step. Through application of this technology, we acquired antibodies to protein variants of TDP-43 that are selectively found in human ALS brain tissue. We expect that this protocol should be applicable to generating reagents that selectively bind protein variants present in a wide variety of different biological processes and diseases.

Using atomic force microscopy in combination with biopanning technology we created a negative and positive biopanning system to acquire antibodies against disease-specific protein variants present in any biological material, even at low concentrations. We were successful in obtaining antibodies to TDP-43 protein variants involved in Amyotrophic Lateral Sclerosis.

رواية القوة الذرية المجهر Biopanning استنادا لعزل مورفولوجيا الكواشف محددة ضد المتغيرات TDP-43 في الضموري العضلي الجانبي التصلب

Because protein variants play critical roles in many diseases including TDP-43 in Amyotrophic Lateral Sclerosis (ALS), alpha-synuclein in ...

Single Molecule Fluorescence Microscopy on Planar Supported Bilayers

In the course of a single decade single molecule microscopy has changed from being a secluded domain shared merely by physicists with a strong background in optics and laser physics to a discipline that is now enjoying vivid attention by life-scientists of all venues 1. This is because single molecule imaging has the unique potential to reveal protein behavior in situ in living cells and uncover cellular organization with unprecedented resolution below the diffraction limit of visible light 2. Glass-supported planar lipid bilayers (SLBs) are a powerful tool to bring cells otherwise growing in suspension in close enough proximity to the glass slide so that they can be readily imaged in noise-reduced Total Internal Reflection illumination mode 3,4. They are very useful to study the protein dynamics in plasma membrane-associated events as diverse as cell-cell contact formation, endocytosis, exocytosis and immune recognition. Simple procedures are presented how to generate highly mobile protein-functionalized SLBs in a reproducible manner, how to determine protein mobility within and how to measure protein densities with the use of single molecule detection. It is shown how to construct a cost-efficient single molecule microscopy system with TIRF illumination capabilities and how to operate it in the experiment.

Preparation of protein-functionalized planar glass-supported lipid bilayers, determination of protein mobility within and measurement of protein densities is shown here. A roadmap to building a noise-reduced Total Internal Reflection microscope is outlined, which allows visualizing single bilayer-resident fluorochromes with high spatiotemporal resolution.

واحدة جزيء مضان المجهر على مستو المعتمدة طبقات ثنائية

In the course of a single decade single molecule microscopy has changed from being a secluded domain shared merely by physicists with a strong background ...

Fabrication and Implementation of a Reference-Free Traction Force Microscopy Platform

Quantifying cell-induced material deformation provides useful information concerning how cells sense and respond to the physical properties of their microenvironment. While many approaches exist for measuring cell-induced material strain, here we provide a methodology for monitoring strain with sub-micron resolution in a reference-free manner. Using a two-photon activated photolithographic patterning process, we demonstrate how to generate mechanically and bio-actively tunable synthetic substrates containing embedded arrays of fluorescent fiducial markers to easily measure three-dimensional (3D) material deformation profiles in response to surface tractions. Using these substrates, cell tension profiles can be mapped using a single 3D image stack of a cell of interest. Our goal with this methodology is to make traction force microscopy a more accessible and easier to implement tool for researchers studying cellular mechanotransduction processes, especially newcomers to the field.

This protocol provides instructions for implementing multiphoton lithography to fabricate three-dimensional arrays of fluorescent fiducial markers embedded in poly(ethylene glycol)-based hydrogels for use as reference-free, traction force microscopy platforms. Using these instructions, measurement of 3D material strain and calculation of cellular tractions is simplified to promote high-throughput traction force measurements.

تصنيع وتنفيذ منصة المجهر قوه السحب المرجعية الحرة

Quantifying cell-induced material deformation provides useful information concerning how cells sense and respond to the physical properties of their ...