characterization-quantification-compound-specific-isotopic-analysis

Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids (BPCA)

Fire-derived, pyrogenic carbon (PyC), sometimes called black carbon (BC), is the carbonaceous solid residue of biomass and fossil fuel combustion, such as ...

University of Zurich

Globally, soil organic matter (SOM) contains more than three times as much carbon as either the atmosphere or terrestrial vegetation. Yet it remains largely unknown why some SOM persists for millennia whereas other SOM decomposes readily--and this limits our ability to predict how soils will respond to climate change. Recent analytical and experimental advances have demonstrated that molecular structure alone does not control SOM stability: in fact, environmental and biological controls predominate. Here we propose ways to include this understanding in a new generation of experiments and soil carbon models, thereby improving predictions of the SOM response to global warming.

Persistence of soil organic matter as an ecosystem property.

Pyrogenic organic matter (PyOM), the incomplete combustion product of organic materials, is considered stable in soils and represents a potentially important terrestrial sink for atmospheric carbon dioxide. One well-established method of measuring PyOM in the environment is as benzene polycarboxylic acids (BPCAs), a compound-specific method, which allows both qualitative and quantitative estimation of PyOM. Until now, stable isotope measurement of PyOM carbon involved measurement of the trimethylsilyl (TMS) or methyl (Me) polycarboxylic acid derivatives by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS). However, BPCA derivatives can contain as much as 150% derivative carbon, necessitating post-analysis correction for the accurate measurement of δ¹³C values, leading to increased measurement error. Here, we describe a method for δ¹³C isotope ratio measurement and quantification of BPCAs from soil-derived PyOM, based on ion-exchange chromatography (IEC-IRMS). The reproducibility of the δ¹³C measurement of individual BPCAs by IEC-IRMS was better than 0.35‰ (1σ). The δ¹³C-BPCA analysis of PyOM in soils, including at natural and artificially enriched ¹³C-abundance, produced accurate and precise δ¹³C measurements. Analysis of samples that differed in δ¹³C by as much as 900‰ revealed carryover of <1‰ between samples. The weighted sum of individual δ¹³C-BPCA measurements was correlated with previous isotopic measurements of whole PyOM, providing complementary information for bulk isotopic measurements. We discuss potential applications of δ¹³C-BPCA measurements, including the study of turnover rates of PyOM in soils and the partitioning of PyOM sources based on photosynthetic pathways.

Stable isotopic analysis of pyrogenic organic matter in soils by liquid chromatography-isotope-ratio mass spectrometry of benzene polycarboxylic acids.

Biochar properties vary, and characterization of biochars is necessary for assessing their potential to sequester carbon and improve soil functions. This study aimed at assessing key surface properties of agronomic relevance for products from slow pyrolysis at 250-800 °C, hydrothermal carbonization (HTC), and flash carbonization. The study further aimed at relating surface properties to current characterization indicators. The results suggest that biochar chemical composition can be inferred from volatile matter (VM) and is consistent for corncob and miscanthus feedstocks and for the three tested production methods. High surface area was reached within a narrow temperature range around 600 °C, whereas cation exchange capacity (CEC) peaked at lower temperatures. CEC and pH values of HTC chars differed from those of slow pyrolysis biochars. Neither CEC nor surface area correlated well with VM or atomic ratios. These results suggest that VM and atomic ratios H/C and O/C are good indicators of the degree of carbonization but poor predictors of the agronomic properties of biochar.

Surface properties and chemical composition of corncob and miscanthus biochars: effects of production temperature and method.

Trace element (TE) contamination of soils is a worldwide problem. However, although not considered safe anymore for food production without clean-up, many of these soils may still be used to produce biomass for non-food purposes such as biochar. Exploring the suitability of such biochar for the amendment of low-fertility soil, we investigated growth and metal accumulation of ryegrass (Lolium perenne, var. Calibra) as well as soil microbial abundance on a non-contaminated soil after amendment with biochar from birch (Betula pendula) wood produced on TE contaminated soil in comparison to a treatment with birch wood biochar originating from non-contaminated soil. Biochars were produced from both feedstocks by pyrolysis at two temperatures: 450 and 700 °C. During the pyrolysis, in contrast to Cu, Fe, Mg, K, Mn and P, the elements Cd, Pb, S and Na volatilized. The root biomass of the biochar treated plants was lower than that of the non-amended plants, while that of the shoot was higher. Plant shoot K and Zn concentrations were increased significantly by up to 7- and 3.3-fold respectively. For P, Mg, Mn, Fe and Cu no significant increase in shoot concentration could be detected. Neither the TE-contaminated biochar, nor the non-contaminated biochar had adverse effect on the bacterial community of the soil.

Soil application of biochar produced from biomass grown on trace element contaminated land.

Pyrogenic organic matter (PyOM) decomposes on centennial timescale in soils, but the processes regulating its decay are poorly understood. We conducted one of the first studies of PyOM and wood decomposition in a temperate forest using isotopically labeled organic substrate, and quantified microbial incorporation and physico-chemical transformations of PyOM in situ. Stable-isotope (¹³C and ¹⁵N) enriched PyOM and its precursor wood were added to the soil at 2 cm depth at ambient (N0) and increased (N+) levels of nitrogen fertilization. The carbon (C) and nitrogen (N) of added PyOM or wood were tracked through soil to 15 cm depth, in physically separated soil density fractions and in benzene polycarboxylic acids (BPCA) molecular markers. After 10 months in situ, more PyOM-derived C (>99% of initial 13C-PyOM) and N (90% of initial ¹⁵N-PyOM) was recovered than wood derived C (48% of 13C-wood) and N(89% under N0 and 48% under N+). PyOM-C and wood-C migrated at the rate of 126 mm yr ⁻¹ with 3-4% of PyOMC and 4-8% of wood-C recovered below the application depth. Most PyOM C was recovered in the free light fraction(fLF) (74%), with 20% in aggregate-occluded and 6% in mineral associated fractions – fractions that typically have much slower turnover times. In contrast, wood C was recovered mainly in occluded (33%) or dense fraction (27%).PyOM addition induced loss of native C from soil (priming effect), particularly in fLF (13%). The total BPCA-C content did not change but after 10 months the degree of aromatic condensation of PyOM decreased, as determined by relative contribution of benzene hexa-carboxylic acid (B6CA) to the total BPCA C. Soil microbial biomass assimilated 6-10% of C from the wood, while PyOM contributions was negligible (0.14–0.18%). The addition of N had no effect on the dynamics of PyOM while limited effect on wood.

Transformation and stabilization of pyrogenic organic matter in a temperate forest field experiment.

Carbonaceous materials like biochars are increasingly recognized as effective sorbent materials for sequestering organic pollutants. Here, we study sorption behavior of two common hydrophobic organic contaminants 2,2',5,5'-tetrachlorobiphenyl (CB52) and phenanthrene (PHE), on biochars and other carbonaceous materials (CM) produced at a wide range of conditions and temperatures from various feedstocks. The primary aim was to establish structure-reactivity relationships responsible for the observed variation in CM and biochar sorption characteristics. CM were characterized for their elemental composition, surface area, pore size distribution, aromaticity and thermal stability. Freundlich sorption coefficients for CB52 and PHE (i.e. LogK(F,CB52) and K(F,PHE), respectively) to CM showed a variation of two to three orders of magnitude, with LogK(F,CB52) ranging from 5.12 ± 0.38 to 8.01 ± 0.18 and LogK(F,PHE) from 5.18 ± 0.09 to 7.42 ± 1.09. The highest LogK(F) values were observed for the activated CM, however, non-activated biochars produced at high temperatures (>700 °C) sorbed almost as strongly (within 0.2-0.5 Log units) as the activated ones. Sorption coefficients significantly increased with pyrolysis temperature, CM surface area and pore volume, aromaticity, and thermal stability, and decreased with H/C, O/C, (O + N)/C content. The results of our study contribute to the understanding of processes underlying HOC sorption to CM and explore the potential of CM as engineered sorbents for environmental applications.

Samuel Abiven

Department of Geography

University of Zurich

Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids (BPCA)

Samuel Abiven

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Geography

University of Zurich

Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids (BPCA)

Department of Geography