William R. Walsh

Spinal fusion using an autologous growth factor gel and a porous resorbable ceramic.

Differential expression of osteogenic factors associated with osteoinductivity of human osteosarcoma cell lines.

Effects of low-intensity pulsed ultrasound on tendon-bone healing in an intra-articular sheep knee model.

Bone morphogenetic proteins and Smad expression in ovine tendon-bone healing.

Comparative osteoconductivity of bone void fillers with antibiotics in a critical size bone defect model.

Comparison of poly-L-lactide and polylactide carbonate interference screws in an ovine anterior cruciate ligament reconstruction model.

Beta-TCP bone graft substitutes in a bilateral rabbit tibial defect model.

Effect of low intensity pulsed ultrasound on healing of an ulna defect filled with a bone graft substitute.

Photoelastic comparison of strains in the underlying glenoid with metal-backed and all-polyethylene implants.

Posterolateral spinal fusion in a rabbit model using a collagen-mineral composite bone graft substitute.

A comparison of the thermal properties of 2- and 3-fluted drills and the effects on bone cell viability and screw pull-out strength in an ovine model.

Application of resorbable poly(lactide-co-glycolide) with entangled hyaluronic acid as an autograft extender for posterolateral intertransverse lumbar fusion in rabbits.

Effects of patellar position and defect healing on in vitro stifle joint kinematics following removal of the central one-third of the patellar tendon in an ovine model.

Relationship of surgical accuracy and clinical outcomes in Charitè lumbar disc replacement.

The effect of sterilization on the dynamic mechanical properties of paired rabbit cortical bone.

The effect of sterilization methods on the osteoconductivity of allograft bone in a critical-sized bilateral tibial defect model in rabbits.

Cement-implant interface contamination: possible reason of inferior clinical outcomes for rough surface cemented stems.

Influence of plate-bone contact on cyclically loaded conically coupled locking plate failure.

The Masquelet technique for membrane induction and the healing of ovine critical sized segmental defects.

Plasma-sprayed titanium coating to polyetheretherketone improves the bone-implant interface.

Looped suture properties: implications for multistranded flexor tendon repair.

The design evolution of interbody cages in anterior cervical discectomy and fusion: a systematic review.

Development of a Novel Model for the Assessment of Dead-Space Management in Soft Tissue.

The Impact of Nitinol Staples on the Compressive Forces, Contact Area, and Mechanical Properties in Comparison to a Claw Plate and Crossed Screws for the First Tarsometatarsal Arthrodesis.

Radiological and clinical outcomes of novel Ti/PEEK combined spinal fusion cages: a systematic review and preclinical evaluation.

Accelerometers for objective evaluation of physical activity following spine surgery.

A Microscopic and Biomarker Evaluation of Embolic Filter Debris Collected During Carotid Artery Stenting.

Biomechanical evaluation of a biomimetic spinal construct.

Combination Ti/PEEK ALIF cage for anterior lumbar interbody fusion: Early clinical and radiological results.

Biomechanical evaluation of shape-memory alloy staples for internal fixation-an in vitro study.

Anterior Lumbar Interbody Fusion Integrated Screw Cages: Intrinsic Load Generation, Subsidence, and Torsional Stability.

Teaching Tip: Simulated Tumors as an Aid to Teaching Principles of Surgical Oncology.

The in vivo response to a novel Ti coating compared with polyether ether ketone: evaluation of the periphery and inner surfaces of an implant.

Application of Calcium Sulfate for Dead Space Management in Soft Tissue: Characterisation of a Novel In Vivo Response.

A novel in vivo large animal model of lumbar spinal joint degeneration.

Effects of supercritical fluid CO and 25 kGy gamma irradiation on the initial mechanical properties and histological appearance of tendon allograft.

Corrosion of 3D-Printed Orthopaedic Implant Materials.

Suture wear particles cause a significant inflammatory response in a murine synovial airpouch model.

Integral Fixation Titanium/Polyetheretherketone Cages for Cervical Arthrodesis: Evolution of Cage Design and Early Radiological Outcomes and Fusion Rates.

Efficacy of a synthetic calcium phosphate with submicron surface topography as autograft extender in lapine posterolateral spinal fusion.

Anterior Lumbar Interbody Fusion Using a Personalized Approach: Is Custom the Future of Implants for Anterior Lumbar Interbody Fusion Surgery?

Development of a Customized Interbody Fusion Device for Treatment of Canine Disc-Associated Cervical Spondylomyelopathy.

Technical Note: Pedicle Cement Augmentation with Proximal Screw Toggle and Loosening.

Does implantation site influence bone ingrowth into 3D-printed porous implants?

Biphasic calcium phosphate with submicron surface topography in an model of instrumented posterolateral spinal fusion.

3D-printed spine surgery implants: a systematic review of the efficacy and clinical safety profile of patient-specific and off-the-shelf devices.

Three-Dimensional Morphometric Analysis of Lumbar Vertebral End Plate Anatomy.

C3-C5 Chordoma Resection and Reconstruction with a Three-Dimensional Printed Titanium Patient-Specific Implant.

MagnetOs, Vitoss, and Novabone in a Multi-endpoint Study of Posterolateral Fusion: A True Fusion or Not?

Distalising tibial tubercle osteotomy decreases patellar tendon force - A treatment rationale for recalcitrant patellar tendinopathy.

Performance of Seven Commercially Available Demineralized Bone Matrix Fiber and Putty Products in a Rat Posterolateral Fusion Model.

Bone ongrowth and mechanical fixation of implants in cortical and cancellous bone.

Correction to: 3D-printed spine surgery implants: a systematic review of the efficacy and clinical safety profile of patient-specific and off-the-shelf devices.

Undercut macrostructure topography on and within an interbody cage improves biomechanical stability and interbody fusion.

A New Era of Antibiotics: The Clinical Potential of Antimicrobial Peptides.

mHealth Apps for Enhanced Management of Spinal Surgery Patients: A Review.

Innovation and New Technologies in Spine Surgery, Circa 2020: A Fifty-Year Review.

Fatigue implications for bending orthopaedic plates.

Authors reply to "does undercut macrostructure cage cause increase of subsidence incidence and decease of disc height?".

Induction of muscle-regenerative multipotent stem cells from human adipocytes by PDGF-AB and 5-azacytidine.

Single level posterolateral lumbar fusion in a New Zealand White rabbit () model: Surgical anatomy, operative technique, autograft fusion rates, and perioperative care.

Temporal response of an injectable calcium phosphate material in a critical size defect.

Influence of Screw-Hole Defect Size on the Biomechanical Properties of Feline Femora in an Ex Vivo Model.

High-strength, porous additively manufactured implants with optimized mechanical osseointegration.

The Reliability of the Microsoft Kinect and Ambulatory Sensor-Based Motion Tracking Devices to Measure Shoulder Range-of-Motion: A Systematic Review and Meta-Analysis.

Impact of test environment on the fracture resistance of cortical bone.

Bioinspired Polydopamine Coatings Facilitate Attachment of Antimicrobial Peptidomimetics with Broad-Spectrum Antibacterial Activity.

Standalone titanium/polyetheretherketone interbody cage for anterior lumbar interbody fusion: Clinical and radiological results at 24 months.

'SMART' implantable devices for spinal implants: a systematic review on current and future trends.

Validation of a novel range of motion assessment tool for the cervical spine: the HALO digital goniometer.

Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity.