3d-printing-model-of-a-patient-s-specific-lumbar-vertebra

3D Printing Model of a Patient's Specific Lumbar Vertebra

Selective dorsal rhizotomy (SDR) is a difficult, risky, and sophisticated operation, in which a laminectomy should not only expose an adequate surgical ...

a-3d-digital-model-for-diagnosis-treatment-pulmonary

A 3D Digital Model for the Diagnosis and Treatment of Pulmonary Nodules

The three-dimensional (3D) reconstruction of pulmonary nodules using medical images has introduced new technical approaches for diagnosing and treating ...

a-three-dimensional-digital-model-for-early-diagnosis-hepatic

A Three-Dimensional Digital Model for Early Diagnosis of Hepatic Fibrosis Based on Magnetic Resonance Elastography

Hepatic fibrosis is an early stage of liver cirrhosis, and there are no better non-invasive and convenient methods for the detection and evaluation of the ...

three-dimensional-reconstruction-for-whole-lung-with-early-multiple

Three-Dimensional Reconstruction for the Whole Lung with Early Multiple Pulmonary Nodules

For patients with early multiple pulmonary nodules, it is essential, from a diagnostic perspective, to determine the spatial distribution, size, location, ...

a-3d-quantification-technique-for-liver-fat-fraction-distribution

A 3D Quantification Technique for Liver Fat Fraction Distribution Analysis Using Dixon Magnetic Resonance Imaging

This study presents a 3D quantification methodology for the distribution of liver fat fraction (LFF) through the utilization of Dixon MRI image analysis. ...

synchronous-triplanar-reconstruction-integrated-with-color-doppler

Synchronous Triplanar Reconstruction Integrated with Color Doppler Mapping for Precise and Rapid Localization of Thyroid Lesions

This paper proposes a novel thyroid examination technique based on five-dimensional (5D) synchronous reconstruction of ultrasound data. The raw temporal ...

construction-application-cerebral-functional-region-based-cerebral

Construction and Application of Cerebral Functional Region-Based Cerebral Blood Flow Atlas Using Magnetic Resonance Imaging-Arterial Spin Labeling

Cerebral conditions often require precise diagnosis and monitoring, necessitating advanced imaging techniques. Current modalities may not adequately ...

polar-histogram-visualization-acute-stress-disorder-scale-scores-for

Polar Histogram Visualization of Acute Stress Disorder Scale Scores for Comprehensive Clinical Assessment

The Acute Stress Disorder Scale (ASDS) is crucial for assessing acute stress disorder (ASD), especially in high-stress environments like Intensive Care ...

multifractal-spectrum-analysis-for-assessing-pulmonary-nodule

Multifractal Spectrum Analysis for Assessing Pulmonary Nodule Malignancy

Non-invasive assessment of pulmonary nodule malignancy remains a critical challenge in lung cancer diagnosis. Traditional methods often lack precision in ...

a-data-driven-approach-to-quantifying-immune-states-in-sepsis

A Data-Driven Approach to Quantifying Immune States in Sepsis

In sepsis, understanding the interplay among white blood cells, lymphocytes, and neutrophils is crucial for assessing the immune condition and optimizing ...

precise-non-invasive-liver-cirrhosis-quantification-via-multimodal

Precise Non-invasive Liver Cirrhosis Quantification <em>via</em> Multimodal Stiffness-Structural Fusion Imaging

Traditional Magnetic Resonance Elastography (MRE) presents stiffness and structural images separately, requiring manual ROI delineation for liver ...

quantitative-assessment-significant-hematological-parameters

Quantitative Assessment of Significant Hematological Parameters Deviation from Healthy State for Sepsis Clinical Monitoring

Sepsis, a life-threatening condition, requires improved diagnostics and severity assessment. Based on long-term clinical observation, Hemoglobin (Hb), ...

Beijing Intelligent Entropy Science & Technology Co Ltd.

Beijing Intelligent Entropy Science& Technology Co Ltd.

Beijing Intelligent Entropy Science & Technology Co Ltd.,

Beijing Intelligent Entropy Science & Technology Co., Ltd.

It is technically challenging for pediatric anesthesiologists to use bronchial blocker (BB) to isolate the lungs of infants during thoracoscopic surgery. Further, BB currently sold in the market cannot match the anatomical characteristics of the infants, especially on the right main bronchus. It may easily cause poor exhaustion of the right upper lobe, which leads to interference with the thoracoscopic surgical field. The two dimensional reconstruction data of 124 normal infants' airways were extracted from the medical image database of Beijing Children's Hospital for statistical analysis. After using linear fitting and goodness-of-fit test, a good linear relationship was detected between infant age and various parameters related to aid in designing a new BB for infants (R=0.502). According to the growth and development rate of infants, the DICOM files of airway CT scan of 7 infants aged 30, 60, 90, 120, 180, 270, and 360 days were selected to print non-transparent convex and transparent concave 3D models. The non-transparent convex model was precisely measured to obtain the important parameters for BB design infants only, to complete the design of BB, to generate the sample, and to verify the blocking effect of produced sample in transparent concave three-dimensional (3D) model.

Convex and Concave Model 3D Printing for Designing Right-side Bronchial Blocker for Infants.

Non-alcoholic fatty liver disease (NAFLD) is characterized by dysregulated carbohydrate and lipid metabolism, which are its primary features. However, traditional biochemical markers pose challenges for accurate quantification and visualization of metabolic states. This study introduces a novel states-based approach for accurate NAFLD assessment.

Probabilistic Scatter Plots for visualizing carbohydrate and lipid metabolism states in Non-Alcoholic Fatty Liver Disease.

Puncture training with simulation models has emerged as a critical method for transmitting puncture skills, improving success rates, and minimizing injuries. Yet, obstacles such as proper material for ultrasound guidance, restricted options of 3D printing resources, and available substances to simulate human skin and muscle still hinder the production of simulation models that closely replicate clinical practice. This study aimed to develop a selective laser melting (SLM), 3D-printed simulation model that replicated the spine and skin contours of patients with spinal scoliosis.

Utilization of 3D printing modeling techniques in the simulation instruction of ultrasound-guided puncture procedures on scoliotic spines of spinal muscular atrophy.

Hepatitis B Cirrhosis, a severe progression of chronic Hepatitis B infection, requires a comprehensive understanding of the interplay among lymphocyte populations. This study aims to quantify and visualize the relationships among T cells, NK cells, and B cells to aid in assessing immune status, diagnosing the condition, and optimizing treatment strategies.

ArticleTotal : 12	Year
Publication title	2023
Publication title	2023
Publication title	2023
Publication title	2023
Publication title	2023

Article	Year
Convex and Concave Model 3D Printing for Designing Right-side Bronchial Blocker for Infants. International journal of bioprinting\| PubMed ID: 36105142	2022
Probabilistic Scatter Plots for visualizing carbohydrate and lipid metabolism states in Non-Alcoholic Fatty Liver Disease. Clinics and research in hepatology and gastroenterology\| PubMed ID: 38703816	2024
Utilization of 3D printing modeling techniques in the simulation instruction of ultrasound-guided puncture procedures on scoliotic spines of spinal muscular atrophy. 3D printing in medicine\| PubMed ID: 40287565	2025
Quantification and clustering of immune states in hepatitis B Cirrhosis. Immunobiology\| PubMed ID: 40582284	2025

Fangliang Xing

Biography

JoVE Journal Publications

Other Publications