design-and-optimization-strategies-of-a-high-performance-vented-box

Design and Optimization Strategies of a High-Performance Vented Box

This study aims to solve the problems of air flow chaos and poor performance in a vented box caused by the heterogeneous distribution of airflow through ...

optimization-an-air-based-heat-management-system-for-dusty

Optimization of An Air-Based Heat Management System for Dusty Particulate Matter-Covered Lithium-Ion Battery Packs

This study aims to solve the problem of the cell temperature rise and performance decline caused by dusty particulate matter covering the surface of the ...

Wenzhou University

As a kind of green and sustainable technology, electric vehicles are continuously highlighted for solving the significant problems of energy and air pollution. In this paper, fault tolerance optimization of an air-cooled lithium battery pack having a damaged unit was considered to improve the heat dissipation performance. For constructing the relationship between the objective function and the design variables, a quadratic polynomial response function was set up based on the experimental points, which were selected by the Latin-hypercube design of experiment method. Then, a multi-island genetic algorithm-based optimization of the battery pack having a damaged unit was performed under the condition of adjusting the flow velocity of each inlet. The results show that the acceptable temperature differences were obtained under the condition of fixing the total mass flow rate of the inlets. The simulation and fault tolerance optimization methods recommended in this study can be widely used to improve the real safety level of the systems.

Fault Tolerance Optimization of a Lithium Battery Pack Having a Damaged Unit.

To research the internal flow characteristics of a single-channel centrifugal pump, the computational fluid dynamics method is used in this study. Several monitoring points are set on the volute to analyze the change of pressure pulsation and radial force when the impeller rotates at different angles. The results show that the pressure pulsation in the single-channel pump volute is induced by the rotor-stator interaction and its harmonics. The monitoring points close to the separation tongue along the rotation direction of the impeller are more affected by the flow rate.

Zhenmu Chen

College of Mechanical and Electrical Engineering,
Institute of Laser and Optoelectronics Intelligent Manufacturing

Wenzhou University

Design and Optimization Strategies of a High-Performance Vented Box

Optimization of An Air-Based Heat Management System for Dusty Particulate Matter-Covered Lithium-Ion Battery Packs

Zhenmu Chen

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}College of Mechanical and Electrical Engineering,Institute of Laser and Optoelectronics Intelligent Manufacturing

Wenzhou University

Design and Optimization Strategies of a High-Performance Vented Box

Optimization of An Air-Based Heat Management System for Dusty Particulate Matter-Covered Lithium-Ion Battery Packs

College of Mechanical and Electrical Engineering,
Institute of Laser and Optoelectronics Intelligent Manufacturing