A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Today, wearable electronics devices combine a large variety of functional, stretchable, and flexible technologies. However, in many cases, these devices ...

Conformable Wearable Electrodes: From Fabrication to Electrophysiological Assessment

Wearable electronic devices are becoming key players in monitoring the body signals predominantly altered during physical activity tracking. Considering ...

Ecole Nationale Supérieure des Mines de Saint-Étienne, CMP-EMSE, MOC

Mines Saint-Etienne

Highly conformable conducting polymer electrodes for in vivo recordings.

In vivo electrophysiological recordings of neuronal circuits are necessary for diagnostic purposes and for brain-machine interfaces. Organic electronic devices constitute a promising candidate because of their mechanical flexibility and biocompatibility. Here we demonstrate the engineering of an organic electrochemical transistor embedded in an ultrathin organic film designed to record electrophysiological signals on the surface of the brain. The device, tested in vivo on epileptiform discharges, displayed superior signal-to-noise ratio due to local amplification compared with surface electrodes. The organic transistor was able to record on the surface low-amplitude brain activities, which were poorly resolved with surface electrodes. This study introduces a new class of biocompatible, highly flexible devices for recording brain activity with superior signal-to-noise ratio that hold great promise for medical applications.

In vivo recordings of brain activity using organic transistors.

Ion mobility has a direct influence on the performance of conducting polymers in a number of applications as it dictates the operational speed of the devices. We report here the enhanced ion mobility of poly(3,4-ethylene dioxythiophene) after incorporation of gelatin. The gelatin-rich domains were seen to provide an ion pathway through the composites.

Engineering hydrophilic conducting composites with enhanced ion mobility.

Organic electrochemical transistors are integrated on depth probes to achieve localized electrical stimulation of neurons. The probes feature a mechanical delamination process which leaves only a 4 μm thick film with embedded transistors inside the brain. This considerably reduces probe invasiveness and correspondingly improves future brain-machine interfaces.

Localized Neuron Stimulation with Organic Electrochemical Transistors on Delaminating Depth Probes.

Wearable sensors are receiving a great deal of attention as they offer the potential to become a key technological tool for healthcare. In order for this potential to come to fruition, new electroactive materials endowing high performance need to be integrated with textiles. Here we present a simple and reliable technique that allows the patterning of conducting polymers on textiles. Electrodes fabricated using this technique showed a low impedance contact with human skin, were able to record high quality electrocardiograms at rest, and determine heart rate even when the wearer was in motion. This work paves the way towards imperceptible electrophysiology sensors for human health monitoring.

Direct patterning of organic conductors on knitted textiles for long-term electrocardiography.

A wearable keyboard is demonstrated in which conducting polymer electrodes on a knitted textile sense tactile input as changes in capacitance. The use of a knitted textile as a substrate endows stretchability and compatibility to large-area formats, paving the way for a new type of wearable human-machine interface.

Wearable Keyboard Using Conducting Polymer Electrodes on Textiles.

We propose a facile and reproducible method, based on ultra thin porous alumina membranes, to produce cm(2) ordered arrays of nano-pores and nano-pillars on any kind of substrates. In particular our method enables the fabrication of conducting polymers nano-structures, such as poly[3,4-ethylenedioxythiophene]:poly[styrene sulfonate] (

Nanostructured conducting polymers for stiffness controlled cell adhesion.

Electronic textiles are an emerging field providing novel and non-intrusive solutions for healthcare. Conducting polymer-coated textiles enable a new generation of fully organic surface electrodes for electrophysiological evaluations. Textile electrodes are able to assess high quality muscular monitoring and to perform transcutaneous electrical stimulation.

Cutaneous Recording and Stimulation of Muscles Using Organic Electronic Textiles.

In recent years, gels based on ionic liquids incorporated into polymer matrices, namely iongels, have emerged as long-term contact media for cutaneous electrophysiology. Iongels possess high ionic conductivity and negligible vapor pressure and can be designed on demand. In spite of the extensive efforts devoted to the preparation of biodegradable ionic liquids, the investigations related to the preparation of iongels based on biodegradable polymers remain scarce. In this work, biodegradable polycarbonate-based iongels are prepared by ring-opening polymerization of -substituted eight ring membered cyclic carbonate monomers in the presence of imidazolium lactate ionic liquid. Our iongels are able to take up 10⁻30 wt % of ionic liquid and become softer materials by increasing the amount of free ionic liquid. Rheological measurements showed that the cross-over point between the storage modulus G' and loss modulus G″ occurs at lower angular frequencies when the loading of free ionic liquid increases. These gels are able to take up to 30 wt % of the ionic liquid and the ionic conductivity of these gels increased up to 5 × 10 S·cm at 25 °C as the amount of free ionic liquid increased. Additionally, we assess the biodegradation studies of the iongels by immersing them in water. The iongels decrease the impedance with the human skin to levels that are similar to commercial Ag/AgCl electrodes, allowing an accurate physiologic signals recording. The low toxicity and biodegradability of polycarbonate-based iongels make these materials highly attractive for cutaneous electrophysiology applications.

Biodegradable Polycarbonate Iongels for Electrophysiology Measurements.

Facemasks are used as a personal protective equipment in medical services. They became compulsory during the recent COVID-19 pandemic at large. Their barrier effectiveness during various daily activities over time has been the subject of much debate. We propose the fabrication of an organic sensor to monitor the integrity of surgical masks to ensure individuals' health and safety during their use. Inkjet printing of an interdigitated conducting polymer-based sensor on the inner layer of the mask proved to be an efficient and direct fabrication process to rapidly reach the end user. The sensor's integration happens without hampering the mask functionality and preserving its original air permeability. Its resistive response to humidity accumulation allows it to monitor the mask's wetting in use, providing a quantified way to track its barrier integrity and assist in its management. Additionally, it detects the user's respiration rate as a capacitive response to the exhaled humidity, essential in identifying breathing difficulties or a sign of an infection. Respiration evaluations during daily activities show outstanding performance in relation to unspecific motion artifacts and breathing resolution. This e-mask yields an integrated solution for home-based individual monitoring and an advanced protective equipment for healthcare professionals.

Esma Ismailova

Department of Bioelectronics

Ecole Nationale Supérieure des Mines de Saint-Étienne, CMP-EMSE, MOC

A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Conformable Wearable Electrodes: From Fabrication to Electrophysiological Assessment

Esma Ismailova

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Bioelectronics

Ecole Nationale Supérieure des Mines de Saint-Étienne, CMP-EMSE, MOC

A Simple and Scalable Fabrication Method for Organic Electronic Devices on Textiles

Conformable Wearable Electrodes: From Fabrication to Electrophysiological Assessment

Department of Bioelectronics