using-extraordinary-optical-transmission-to-quantify-cardiac

Using Extraordinary Optical Transmission to Quantify Cardiac Biomarkers in Human Serum

For a biosensing platform to have clinical relevance in point-of-care (POC) settings, assay sensitivity, reproducibility, and ability to reliably monitor ...

A*STAR (Agency for Science, Technology and Research)

This paper provides a novel technique to detect transparent biological living cells trapped in a microfluidic MEMS device by optical diffraction. The device essentially consists of an optical aperture or an aperture array patterned in metal layer and a microfluidic chamber positioned above the center of the aperture. When the cells in the chamber are illuminated through the aperture, the far-field diffraction pattern can be recorded by a CCD camera or a photodetector array. This diffraction pattern uniquely corresponds to the sizes, positions, and intrinsic optical properties of the aperture, cells, and the microfluidic chamber materials, so any unknown but relevant parameter is able to be extrapolated when all other parameters are fixed or identified. This paper describes in detail the designs of various microfluidic chambers and apertures for this application, and the development of a complete set of software for the analysis of the cells' optical properties. Compared with other currently available methods for the detection of transparent living cells, this method has the advantages of simple device structure, easy to manipulate, able to simultaneously detect several cells of different species, as well as providing accurate and sensitive results. Besides the detection of living cells, this technique can also be used to detect or characterize other transparent or low optical absorption particles, such as polymer spheres or insoluble droplets, inside an aqueous solution.

Design of MEMS devices with optical apertures for the detection of transparent biological cells.

This paper proposes a novel method to detect transparent living cells in a transparent microfluidic chamber by optical diffraction of an aperture or an aperture array. Through the analysis of the far-field diffraction pattern, one of the parameters of the cells, including the size, refractive index, or position, can be extracted by the analysis software developed in this paper. Calculations are carried out to discuss the key issues of this MEMS device, and our simulation is verified by diffraction patterns of transparent microparticles on fabricated apertures, recorded via a digital camera.

Algorithm and simulation for analysis of bio-images obtained by aperture diffraction based optical MEMS.

Dispersed nanosphere lithography can be employed to fabricate gold nanostructures for localized surface plasmon resonance, in which the gold film evaporated on the nanospheres is anisotropically dry etched to obtain gold nanostructures. This paper reports that by wet etching of the gold film, various kinds of gold nanostructures can be fabricated in a cost-effective way. The shape of the nanostructures is predicted by profile simulation, and the localized surface plasmon resonance spectrum is observed to be shifting its extinction peak with the etching time.(See supplementary material 1).

Profile prediction and fabrication of wet-etched gold nanostructures for localized surface plasmon resonance.

Localized surface plasmon resonance (LSPR) has been extensively studied as potential chemical and biological sensing platform due to its high sensitivity to local refractive index change induced by molecule adsorbate. Previous experiments have demonstrated the LSPR generated by gold nanoholes and its biosensing. Here, we realize large uniform area of nanoholes on scale of cm2 on glass substrate by nanosphere lithography which is essential for mass production. The morphology of the nanoholes is characterized using scanning electron microscope and atomic force microscope. The LSPR sensitivity of the nanoholes to local refractive index is measured to be 36 nm/RIU. However, the chip has demonstrated high sensitivity and specificity in biosensing: bovine serum albumin adsorption is detected with LSPR peak redshift of 27 nm, and biotin-streptavidin immunoassay renders a LSPR redshift of 11 nm. This work forms a foundation toward the cost-effective, high-throughput, reliable and robust chip-based LSPR biosensor.

Localized surface plasmon resonance biosensing with large area of gold nanoholes fabricated by nanosphere lithography.

We designed and fabricated two new nanostructured biosensing chips, with which the sensitive detection of prostate specific antigen (PSA) as low as 100 pg ml(-1) can be achieved, by measuring the plasmon enhanced fluorescence through a conventional dark field microscope. The gold nanostructure arrays, one with gold nanopillars of 140 nm, the other with gold nanoholes of 140 nm, were fabricated via nanoimprinting onto glass substrate, as localized surface plasmon resonance (LSPR) generators to enhance the fluorescent emission of fluorophore, e.g. quantum dot (QD). A sandwich bioassay of capture anti-PSA antibody (cAb)/PSA/detection anti-PSA (dAb) labeled by QD-655 was established on the nanostructures, and the perfect LSPR excitation distance (10-15 nm) between the nanostructure and QD-655 was simulated and controlled by a cleft cAb fragment and streptavidin modified QD. QD was chosen in this study due to its photo stability, broad Stokes shift, and long lifetime. As far as we know, this is the first time that QD is applied for PSA detection on the uniform nanostructured sensing chips based on the LSPR enhanced fluorescence. Due to the miniaturized nanoarray sensing chip (1.8 mm × 1.8 mm), the convenience and specificity for the detection of PSA via the sandwich assay, and the high optical detection sensitivity, the platform has great potential for the development of a portable point-of-care (POC) system for outpatient diagnosis and treatment monitoring.

Imprinted gold 2D nanoarray for highly sensitive and convenient PSA detection via plasmon excited quantum dots.

A highly transparent superamphiphobic plastic sheet was developed. The plastic sheet polymethyl methacrylate (PMMA) was spin-coated on a glass substrate. Synthesized silica nanoparticles were sprayed on PMMA, followed by fluorosilane drop-coating. The results of contact angle measurements show that the developed PMMA sheet has superamphiphobic properties with high advancing contact angles for water (154°), toluene (139°), and silicone oil (132.9°). The amphiphobicity of the plastic sheet can be tuned by the surface coverage of the silica nanoparticles distributed on the PMMA surface. The surface coverage of the nanoparticles on our PMMA sheet is about 20%, and it agrees with our contact angle calculations for the sheet with and without nanoparticles.

Xiaodong Zhou

Institute of Materials Research Engineering

A*STAR (Agency for Science, Technology and Research)

Using Extraordinary Optical Transmission to Quantify Cardiac Biomarkers in Human Serum

Xiaodong Zhou

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Institute of Materials Research Engineering

A*STAR (Agency for Science, Technology and Research)

Using Extraordinary Optical Transmission to Quantify Cardiac Biomarkers in Human Serum

Institute of Materials Research Engineering