Consider a point on a cube experiencing plane stress, defined by its stress components. If the element rotates by an angle, its stress components change. ...

The normal and shearing stress equations of the transformed plane, when graphed, form a circle that demonstrates their relationship for any given angular ...

Two planes that are at right angles carry shearing stress along with tensile and compressive stresses. With known stress values, determine the principal ...

Mohr's circle is a visual representation of stress transformation on an element. The stress components in this element are plotted on a graph to ...

The general state of stress refers to the various forces and pressures an object experiences. Consider a tetrahedron with one face perpendicular to a line ...

Structural elements and machine parts made from ductile materials are designed to resist yielding under an expected load. The yield point is identified ...

Consider a long bar subjected to uniformly distributed loads on its sides. In such bars, the transformation of plane strain under a rotation of coordinate ...

Mohr's circle analyzes plane strain by plotting points with the abscissa equal to the normal strain and the ordinate equal to half the shearing ...

Three-dimensional strain analysis uses principal stress axes to evaluate deformation in elastic, homogeneous materials. A small cubic element, when ...

Strain measures the deformation or displacement in a material. Normal strain is calculated by comparing lengths before and after a load is applied. A more ...