登录

When analyzing two planes intersecting at right angles under the influence of shearing, tensile, and compressive stresses, it is essential to identify principal planes, maximum shearing stress, and principal stresses. To find the principal planes, apply a formula that equates them to twice the shearing stress divided by the difference between tensile and compressive stresses.

Equation 1

By inserting the given shearing, tensile, and compressive stress values into this formula, one can calculate the orientations of the principal planes. Then consider the average of the tensile and compressive stresses to determine the average normal stress. This step is important for understanding the overall stress distribution across the material. The maximum shearing stress is calculated using the derived normal and shearing stress values.

Equation 2

This calculation highlights the peak shearing stress the material experiences, which is vital for assessing its failure risk. The major principal stress, which indicates the maximum stress the material can withstand without yielding, is computed by adding the maximum shearing stress to the average normal stress. Similarly, the minimum principal stress is found by subtracting the maximum shearing stress from the average normal stress. These computations are fundamental for engineering applications, providing insights into material behavior under complex stress conditions.

Tags

Principal StressesPrincipal PlanesMaximum Shearing StressTensile StressesCompressive StressesAverage Normal StressStress DistributionFailure RiskMajor Principal StressMinimum Principal StressEngineering ApplicationsMaterial BehaviorStress Analysis

来自章节 23:

article

Now Playing

23.3 : Principal Stresses: Problem Solving

Transformations of Stress and Strain

141 Views

article

23.1 : Transformation of Plane Stress

Transformations of Stress and Strain

153 Views

article

23.2 : Principal Stresses

Transformations of Stress and Strain

144 Views

article

23.4 : Mohr's Circle for Plane Stress

Transformations of Stress and Strain

166 Views

article

23.5 : General State of Stress

Transformations of Stress and Strain

148 Views

article

23.6 : Yield Criteria for Ductile Materials under Plane Stress

Transformations of Stress and Strain

114 Views

article

23.7 : Transformation of Plane Strain

Transformations of Stress and Strain

134 Views

article

23.8 : Mohr's Circle for Plane Strain

Transformations of Stress and Strain

353 Views

article

23.9 : Three-Dimensional Analysis of Strain

Transformations of Stress and Strain

160 Views

article

23.10 : Measurements of Strain

Transformations of Stress and Strain

107 Views

JoVE Logo

政策

使用条款

隐私

科研

教育

关于 JoVE

版权所属 © 2025 MyJoVE 公司版权所有,本公司不涉及任何医疗业务和医疗服务。