This work was supported by an NSF/ARRA award (IOS 0920357) and an award from the NIH (5R21MH098463).

1，细胞的制备（日-2至0） <ol><li>分裂的HEK293细胞1:5使用0.05％胰蛋白酶-EDTA溶液孵育在生长培养基，在37℃，5％CO 2，直到60 - 80％汇合（2 - 3天）。对于每种条件，培养的细胞在2×100毫米培养皿中。 </li></ol> 2，细胞转染（第1天） <ol><li>转染HEK293细胞与质粒编码的Fc-融合使用转染试剂，如脂质体。也可以使用这导致可比较的转染效率的替代方法。 </li><li>回到转染的细胞来孵化24小时。 </li></ol> 3，细胞增殖（第2天） <ol><li>预热生长培养基不胎牛血清（-FBS）至37℃。 </li><li>涮菜2倍用10毫升生长培养基-FBS，并返回菜到37℃培养箱中培养1小时。 </li><li>涮菜的文化再一次用10毫升生长培养基-FBS，共3次洗涤。 </li><li> INCU大怒的转染HEK293细胞，在37℃下再48小时无FBS收集媒体面前。 </li></ol> 4，珠聚合（4日） <ol><li>收集从培养皿媒体，从各对菜肴传输媒体到50ml锥形管中并旋转，在500×g离心5分钟以沉淀细胞碎片。 </li><li>从50ml锥形管中的过滤介质为使用30ml的注射器和0.45微米注射器式滤器的离心过滤。 </li><li>旋转离心过滤器在4000 XG和4℃直至浓缩培养基的体积为约500微升（约15分钟）。重复，直到所有培养基添加了浓缩。 </li><li>加入1.5微升蛋白G磁珠到1ml冰冷的1.5ml微量离心管中的每个样品结合缓冲液，代替上的磁铁和除去缓冲。立即将浓缩的培养基加入到蛋白G磁珠。 </li><li>旋转管在4℃下搅拌2小时。 </li><li> PL在磁铁的王牌管和删除媒体。迅速用冰冷的洗两次珠1ml结合缓冲液，然后重悬珠300μL结合缓冲液。 </li><li>分裂悬浮珠粒成2管，加入150μl到每一个试管中，然后加入1.5微升200mM的氯化钙或200mM的EDTA为"钙"和"无钙"的条件下，分别。 </li><li>传递来自每个条件100μl到一个凹陷以及滑动并收集用透射光显微镜（ 图2）的显微照片。收集从图5场图像的每个实验中，在每个期望的时间点。 </li></ol> 5，数据分析<ol><li>使用ImageJ，或类似的图像分析软件， 使用 Import /图像序列......从文件下拉菜单中的五个图像数据集开放的。这些将被打开的图像堆栈。 </li><li>在图像 / 属性...对话框中，更改I法师单位为像素，并设置像素宽度和像素高度为1.0。 </li><li>转换的图像通过调整/阈值...命令，在图像下拉菜单中的二进制文件。设置阈值，以包括有助于珠或珠粒料的像素，但排除背景和小颗粒。适用于堆叠中的所有图像。 </li><li>在设置测量对话框，检查区和堆栈中的位置框。 </li><li>运行分析颗粒...在分析下拉菜单。这将产生鉴定粒子，包括它们的尺寸（面积），并在其被识别的图像的列表。 </li><li>重复此过程的实验和实验条件。 </li></ol>

<ol>
	<li>Chen, X., Gumbiner, B. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Paraxial+protocadherin+mediates+cell+sorting+and+tissue+morphogenesis+by+regulating+C-cadherin+adhesion+activity.">Paraxial protocadherin mediates cell sorting and tissue morphogenesis by regulating C-cadherin adhesion activity.</a> J. Cell Biol. 174 (2), 301-313 (2006).</li><li>Grumet, M., Friedlander, D. R., Edelman, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evidence+for+the+binding+of+Ng-CAM+to+laminin.">Evidence for the binding of Ng-CAM to laminin.</a> Cell Adhes. Commun. 1 (2), 177-190 (1993).</li><li>Hatta, K., Nose, A., Nagafuchi, A., Takeichi, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cloning+and+expression+of+cDNA+encoding+a+neural+calcium-dependent+cell+adhesion+molecule:+its+identity+in+the+cadherin+gene+family.">Cloning and expression of cDNA encoding a neural calcium-dependent cell adhesion molecule: its identity in the cadherin gene family.</a> J. Cell Biol. 106 (3), 873-881 (1988).</li><li>Hirano, S., Nose, A., Hatta, K., Kawakami, A., Takeichi, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Calcium-dependent+cell-cell+adhesion+molecules+(cadherins):+subclass+specificities+and+possible+involvement+of+actin+bundles.">Calcium-dependent cell-cell adhesion molecules (cadherins): subclass specificities and possible involvement of actin bundles.</a> J. Cell Biol. 105 (6 Pt 1), 2501-2510 (1987).</li><li>Nose, A., Nagafuchi, A., Takeichi, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Expressed+recombinant+cadherins+mediate+cell+sorting+in+model+systems.">Expressed recombinant cadherins mediate cell sorting in model systems.</a> Cell. 54 (7), 993-1001 (1988).</li><li>Nose, A., Takeichi, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+novel+cadherin+cell+adhesion+molecule:+its+expression+patterns+associated+with+implantation+and+organogenesis+of+mouse+embryos.">A novel cadherin cell adhesion molecule: its expression patterns associated with implantation and organogenesis of mouse embryos.</a> J. Cell Biol. 103 (6 Pt 2), 2649-2658 (1986).</li><li>Schreiner, D., Weiner, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combinatorial+homophilic+interaction+between+gamma-protocadherin+multimers+greatly+expands+the+molecular+diversity+of+cell+adhesion.">Combinatorial homophilic interaction between gamma-protocadherin multimers greatly expands the molecular diversity of cell adhesion.</a> Proc. Natl. Acad. Sci. U. S. A. 107 (33), 14893-14898 (2010).</li><li>Takeichi, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+correlation+between+cell+adhesive+properties+and+some+cell+surface+proteins.">Functional correlation between cell adhesive properties and some cell surface proteins.</a> J. Cell Biol. 75, 464-474 (1977).</li><li>Sivasankar, S., Brieher, W., Lavrik, N., Gumbiner, B., Leckband, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+molecular+force+measurements+of+multiple+adhesive+interactions+between+cadherin+ectodomains.">Direct molecular force measurements of multiple adhesive interactions between cadherin ectodomains.</a> Proc. Natl. Acad. Sci. U. S. A. 96 (21), 11820-11824 (1999).</li><li>Sivasankar, S., Gumbiner, B., Leckband, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+measurements+of+multiple+adhesive+alignments+and+unbinding+trajectories+between+cadherin+extracellular+domains.">Direct measurements of multiple adhesive alignments and unbinding trajectories between cadherin extracellular domains.</a> Biophys. J. 80, 1758-1768 (2001).</li><li>Sivasankar, S., Zhang, Y., Nelson, W. J., Chu, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterizing+the+initial+encounter+complex+in+cadherin+adhesion.">Characterizing the initial encounter complex in cadherin adhesion.</a> Structure. 17 (8), 1075-1081 (2009).</li><li>Zhang, Y., Sivasankar, S., Nelson, W. J., Chu, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resolving+cadherin+interactions+and+binding+cooperativity+at+the+single-molecule+level.">Resolving cadherin interactions and binding cooperativity at the single-molecule level.</a> Proc. Natl. Acad. Sci. U. S. A. 106 (1), 109-114 (2009).</li><li>Yasuda, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Activity-induced+protocadherin+arcadlin+regulates+dendritic+spine+number+by+triggering+N-cadherin+endocytosis+via+TAO2beta+and+p38+MAP+kinases.">Activity-induced protocadherin arcadlin regulates dendritic spine number by triggering N-cadherin endocytosis via TAO2beta and p38 MAP kinases.</a> Neuron. 56 (3), 456-471 (2007).</li><li>Chappuis-Flament, S., Wong, E., Hicks, L. D., Kay, C. M., Gumbiner, B. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multiple+cadherin+extracellular+repeats+mediate+homophilic+binding+and+adhesion.">Multiple cadherin extracellular repeats mediate homophilic binding and adhesion.</a> J. Cell Biol. 154 (1), 231-243 (2001).</li><li>Emond, M. R., Biswas, S., Blevins, C. J., Jontes, J. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+complex+of+Protocadherin-19+and+N-cadherin+mediates+a+novel+mechanism+of+cell+adhesion.">A complex of Protocadherin-19 and N-cadherin mediates a novel mechanism of cell adhesion.</a> J. Cell Biol. 195 (7), 1115-1121 (2011).</li><li>Biswas, S., Emond, M. R., Jontes, J. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+clustered+protocadherins+Pcdhalpha+and+Pcdhgamma+form+a+heteromeric+complex+in+zebrafish.">The clustered protocadherins Pcdhalpha and Pcdhgamma form a heteromeric complex in zebrafish.</a> Neuroscience. 219, 280-289 (2012).</li><li>Blevins, C. J., Emond, M. R., Biswas, S., Jontes, J. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differential+expression,+alternative+splicing,+and+adhesive+properties+of+the+zebrafish+delta1-protocadherins.">Differential expression, alternative splicing, and adhesive properties of the zebrafish delta1-protocadherins.</a> Neuroscience. 199, 523-534 (2011).</li><li>Morishita, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+of+the+cadherin-related+neuronal+receptor/protocadherin-alpha+first+extracellular+cadherin+domain+reveals+diversity+across+cadherin+families.">Structure of the cadherin-related neuronal receptor/protocadherin-alpha first extracellular cadherin domain reveals diversity across cadherin families.</a> J. Biol. Chem. 281, 33650-33663 (1074).</li><li>Wojtowicz, W. M., Flanagan, J. J., Millard, S. S., Zipursky, S. L., Clemens, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alternative+splicing+of+Drosophila+Dscam+generates+axon+guidance+receptors+that+exhibit+isoform-specific+homophilic+binding.">Alternative splicing of Drosophila Dscam generates axon guidance receptors that exhibit isoform-specific homophilic binding.</a> Cell. 118 (5), 619-633 (2004).</li><li>Drees, F., Reilein, A., Nelson, W. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell-adhesion+assays:+fabrication+of+an+E-cadherin+substratum+and+isolation+of+lateral+and+Basal+membrane+patches.">Cell-adhesion assays: fabrication of an E-cadherin substratum and isolation of lateral and Basal membrane patches.</a> Methods Mol. Biol. 294, 303-320 (2005).</li></ol>

The authors declare that they have no competing financial interests.

细胞粘附是多细胞生命的一个基本特征，是由细胞表面蛋白的一系列广泛的介导。在这些中，具体的粘合性能被理解为仅一个相对小的比例。在这里，我们描述了一个简单，快速的协议，用于研究融合到一个方便的表位标签分泌的胞外结构域的同种粘附能力。这种方法具有许多重要的优点。第一，稳定细胞株不要求14,20，如可以通过100毫米培养皿中的瞬时转染来产生足够量的蛋白质。这使...

细胞 - 细胞粘连是多细胞生物体的发展和完整性必不可少的，是由细胞表面分子的大量不同的介导。许多这些粘附分子已经确定和特点，尽管很多有待发现。有几种方法用于研究细胞粘附分子的性质（粘附分子），包括细胞分选测定法，细胞聚集测定法1-8和生物物理方法，如原子力显微镜和表面力谱9-12。 偶数简化在使用的细胞系的体外系统的复杂性使得很难确定推定的CAM的粘合性能。通常情况下，分子被认为是CAM，如果它诱导细胞聚集时，转染到非粘着的细胞系。然而，很明显，这不是粘附活性的直接证据。例如，便于在细胞表面输送的或稳定CAM也会导致更多的细胞聚集1,13。此外，一个真正的CAM可能无法介导细胞聚集，如果该细胞系缺乏所需的细胞表面运送或稳定等共同因素。 为了避免这些复杂的因素，即是基于这样的构思更直接测定法可以采用该粘合剂的相互作用应该是胞外结构域的一个固有的生化特性。而珠最初用于表征伍-CAM 2中 ，已扩展这些测定已为了研究钙粘蛋白介导的粘附12,14,15。使用融合在C-cadherin的胞外域Fc融合后，Gumbiner实验表明，多种钙粘蛋白重复导致同种相互作用14。使用类似的珠子聚集试验，E-钙粘蛋白和N-cadherin的附着力也被定性12,15，因为有许多protocadherins 1,15-18和唐氏综合症黏附分子亚型的果蝇 <em&gt; 19。在这里，我们描述了一种相对简单并迅速测定法用于表征分泌，表位标记的推定的同嗜性粘附分子（ 图1）胞外结构域的粘附活性。我们已经使用该测定主要表征的钙粘蛋白家族的成员。

<table border="0" cellpadding="0" cellspacing="0" width="630">
	<tbody>
		<tr height="43">
			<td height="43" style="height:43px;width:212px;">Name of Material/ Equipment</td>
			<td style="width:203px;">Catalog Number</td>
			<td style="width:216px;">Company</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">pFc-N1 plasmid</td>
			<td style="width:203px;">To be submitted</td>
			<td style="width:216px;">Addgene</td>
		</tr>
		<tr height="41">
			<td height="41" style="height:41px;width:212px;">HEK293 cells</td>
			<td style="width:203px;">CRL-1573</td>
			<td style="width:216px;">American Type Culture Collection</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">DMEM</td>
			<td style="width:203px;">10-013-CV</td>
			<td style="width:216px;">Mediatech - Corning</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">Fetal Bovine Serum (FBS)</td>
			<td style="width:203px;">F2442</td>
			<td style="width:216px;">Sigma</td>
		</tr>
		<tr height="41">
			<td height="41" style="height:41px;width:212px;">100X Pen-Strep (10,000 U/ml)</td>
			<td style="width:203px;">15140-122</td>
			<td style="width:216px;">Life Technologies</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">0.05% Trypsin-EDTA</td>
			<td style="width:203px;">25300054</td>
			<td style="width:216px;">Life Technologies</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">Lipofectamine 2000</td>
			<td style="width:203px;">11668030</td>
			<td style="width:216px;">Life Technologies</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">Dynabeads &#8211; Protein G</td>
			<td style="width:203px;">10003D</td>
			<td style="width:216px;">Life Technologies</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:212px;">Bovine Serum Albumin</td>
			<td style="width:203px;">A3294</td>
			<td style="width:216px;">Sigma</td>
		</tr>
		<tr height="41">
			<td height="41" style="height:41px;width:212px;">Depression slides</td>
			<td style="width:203px;">71878-06</td>
			<td style="width:216px;">Electron Microscopy Sciences</td>
		</tr>
		<tr height="21">
			<td height="43" rowspan="2" style="height:43px;width:212px;">Amicon Ultra-15 Centrifugal Filter Unit with Ultracel-10 membrane</td>
			<td rowspan="2" style="width:203px;">UFC901024</td>
			<td rowspan="2" style="width:216px;">Millipore</td>
		</tr>
		<tr height="22">
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;">0.45mm syringe filter</td>
			<td style="width:203px;">83.1826</td>
			<td style="width:216px;">Sarstedt</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;">Dynamag-2 Magnet</td>
			<td>12321D</td>
			<td style="width:216px;">Life Technologies</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:43px;width:212px;">Fiji (ImageJ) Image Analysis Software</td>
			<td style="width:203px;"></td>
			<td style="width:216px;">http://fiji.sc/Fiji</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;"></td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;"></td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;"></td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;"></td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;">Table of Buffers/Solutions</td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:212px;"></td>
			<td style="width:203px;"></td>
			<td style="width:216px;"></td>
		</tr>
		<tr height="41">
			<td height="41" style="height:41px;width:212px;">Growth Media</td>
			<td style="width:203px;">DMEM + 10% FBS + Pen-Strep</td>
			<td style="width:216px;">Filter sterilize and store at 4&#176;C.</td>
		</tr>
		<tr height="41">
			<td height="41" style="height:41px;width:212px;">Growth Media &#8211; FBS</td>
			<td style="width:203px;">DMEM + Pen-Strep</td>
			<td style="width:216px;">Filter sterilize and store at 4&#176;C.</td>
		</tr>
		<tr height="61">
			<td height="61" style="height:61px;width:212px;">Binding Buffer</td>
			<td style="width:203px;">50 mM Tris, pH 7.4, 100 mM NaCl, 10 mM KCl, 0.2% BSA</td>
			<td style="width:216px;">Vortex until dissolved, keep on ice.</td>
		</tr>
	</tbody>
</table>

bead aggregation assays for the characterization of putative cell adhesion molecules

细胞 - 细胞粘连是基本多细胞生命，并通过细胞表面的蛋白质得到大量不同的介导。然而，对于许多这些蛋白质的粘合剂的相互作用是知之甚少。在这里，我们提出一个简单，快速的方法表征假定同嗜细胞粘附分子的粘接性能。培养HEK293细胞被转染的DNA质粒，编码细胞表面蛋白的分泌，抗原表位标记的胞外结构域。使用特定的表位标签官能珠，可溶的，分泌的融合蛋白是从该培养基中捕获。经涂覆的珠粒然后可以在珠凝集测定法或荧光珠分选试验来测试同嗜性粘附直接使用。如果需要的话，诱变可以被用来阐明所需粘附特定氨基酸或结构域。该测定中，只需要少量的表达的蛋白质，不要求生产稳定的细胞系，并且可以ACCOmplished在4天。

<html>一个示例实验示于图2，其示出钙依赖性珠聚合用N-钙粘蛋白与Fc融合（NcadEC-Fc）的胞外域。在不存在的钙，珠表现出很小或没有聚集倾向并有随时间（ 图1A，C），没有增加的聚集体尺寸。在钙离子的存在下，珠粒涂有NcadEC-Fc的节目健壮聚集，以聚集体大小随时间增加（ 图1B中的C）。本实验重复3次，以每一个实例包括图像从五个非重叠领域。粒径在像素?...

Watch this Scientific Journal Video about Bead Aggregation Assays for the Characterization of Putative Cell Adhesion Molecules at JoVE.com

Bead Aggregation Assays for the Characterization of Putative Cell Adhesion Molecules

Here we present a simple, rapid method for characterizing the intrinsic adhesive properties of putative cell adhesion molecules. The secreted, epitope-tagged ectodomain of a cell adhesion molecule is captured from the culture medium on small, uniform functionalized beads. These beads can then be used immediately in simple bead aggregation assays.

珠聚集测定假定的细胞粘附分子的表征

Cell-cell adhesion is fundamental to multicellular life and is mediated by a diverse array of cell surface proteins. However, the adhesive interactions ...

bead-aggregation-assays-for-characterization-putative-cell-adhesion

Research

Education

JoVE Journal

JoVE Core

Cell Biology

Bioengineering

Unit 1

Cell-Cell Interactions

SCIENTISTS IN ACTION

10.5K 次观看.  Ohio State University. Here we present a simple, rapid method for characterizing the intrinsic adhesive properties of putative cell adhesion molecules. The secreted, epitope-tagged ectodomain of a cell adhesion molecule is captured from the culture medium on small, uniform functionalized beads. These beads can then be used immediately in simple bead aggregation assays.

视频: Bead Aggregation Assays for the Characterization of Putative Cell Adhesion Molecules

Fabrication of Electrochemical-DNA Biosensors for the Reagentless Detection of Nucleic Acids, Proteins and Small Molecules

As medicine is currently practiced, doctors send specimens to a central laboratory for testing and thus must wait hours or days to 
receive the results. Many patients would be better served by rapid, bedside tests. To this end our laboratory and others have developed a versatile, reagentless 
biosensor platform that supports the quantitative, reagentless, electrochemical detection of nucleic acids (DNA, RNA), proteins (including antibodies) and small 
molecules analytes directly in unprocessed clinical and environmental samples. In this video, we demonstrate the preparation and use of several biosensors in this 
"E-DNA" class. In particular, we fabricate and demonstrate sensors for the detection of a target DNA sequence in a polymerase chain reaction mixture, an HIV-specific antibody and the drug cocaine. The preparation procedure requires only three hours of hands-on effort followed by an overnight incubation, and their use requires only minutes.

"E-DNA" sensors, reagentless, electrochemical biosensors that perform well even when challenged directly in blood and other complex matrices, have been adapted to the detection of a wide range of nucleic acid, protein and small molecule analytes. Here we present a general procedure for the fabrication and use of such sensors.

无试剂检测核酸，蛋白质和小分子的电化学DNA生物传感器的制备

As medicine is currently practiced, doctors send specimens to a central laboratory for testing and thus must wait hours or days to 
receive the results. ...

科研

生物工程

Synthesis, Assembly, and Characterization of Monolayer Protected Gold Nanoparticle Films for Protein Monolayer Electrochemistry

Colloidal gold nanoparticles protected with alkanethiolate ligands called monolayer protected gold clusters (MPCs) are synthesized and subsequently incorporated into film assemblies that serve as adsorption platforms for protein monolayer electrochemistry (PME). PME is utilized as the model system for studying electrochemical properties of redox proteins by confining them to an adsorption platform at a modified electrode, which also serves as a redox partner for electron transfer (ET) reactions. Studies have shown that gold nanoparticle film assemblies of this nature provide for a more homogeneous protein adsorption environment and promote ET without distance dependence compared to the more traditional systems modified with alkanethiol self-assembled monolayers (SAM).1-3 In this paper, MPCs functionalized with hexanethiolate ligands are synthesized using a modified Brust reaction4 and characterized with ultraviolet visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), and proton (1H) nuclear magnetic resonance (NMR). MPC films are assembled on SAM modified gold electrode interfaces by using a "dip cycle" method of alternating MPC layers and dithiol linking molecules. Film growth at gold electrode is tracked electrochemically by measuring changes to the double layer charging current of the system. Analogous films assembled on silane modified glass slides allow for optical monitoring of film growth and cross-sectional TEM analysis provides an estimated film thickness. During film assembly, manipulation of the MPC ligand protection as well as the interparticle linkage mechanism allow for networked films, that are readily adaptable, to interface with redox protein having different adsorption mechanism. For example, Pseudomonas aeruginosa azurin (AZ) can be adsorbed hydrophobically to dithiol-linked films of hexanethiolate MPCs and cytochrome c (cyt c) can be immobilized electrostatically at a carboxylic acid modified MPC interfacial layer. In this report, we focus on the film protocol for the AZ system exclusively. Investigations involving the adsorption of proteins on MPC modified synthetic platforms could further the understanding of interactions between biomolecules and man-made materials, and consequently aid the development of biosensor schemes, ET modeling systems, and synthetic biocompatible materials.5-8

Alkanethiolate stabilized gold colloids known as monolayer protected clusters (MPCs) are synthesized, characterized, and assembled into thin films as an adsorption interface for protein monolayer electrochemistry of simple redox protein like Pseudomonas aeruginosa azurin (AZ) and cytochrome c (cyt c).

单层的合成，装配和表征蛋白质单分子膜的电化学保护的金纳米粒子薄膜

Colloidal gold nanoparticles protected with alkanethiolate ligands called monolayer protected gold clusters (MPCs) are synthesized and subsequently ...

Adhesion Frequency Assay for In Situ Kinetics Analysis of Cross-Junctional Molecular Interactions at the Cell-Cell Interface

The micropipette adhesion assay was developed in 1998 to measure two-dimensional (2D) receptor-ligand binding kinetics1. The assay uses a human red blood cell (RBC) as adhesion sensor and presenting cell for one of the interacting molecules. It employs micromanipulation to bring the RBC into contact with another cell that expresses the other interacting molecule with precisely controlled area and time to enable bond formation. The adhesion event is detected as RBC elongation upon pulling the two cells apart. By controlling the density of the ligands immobilized on the RBC surface, the probability of adhesion is kept in mid-range between 0 and 1. The adhesion probability is estimated from the frequency of adhesion events in a sequence of repeated contact cycles between the two cells for a given contact time. Varying the contact time generates a binding curve. Fitting a probabilistic model for receptor-ligand reaction kinetics1 to the binding curve returns the 2D affinity and off-rate.
The assay has been validated using interactions of Fc&gamma; receptors with IgG Fc1-6, selectins with glycoconjugate ligands6-9, integrins with ligands10-13, homotypical cadherin binding14, T cell receptor and coreceptor with peptide-major histocompatibility complexes15-19.
The method has been used to quantify regulations of 2D kinetics by biophysical factors, such as the membrane microtopology5, membrane anchor2, molecular orientation and length6, carrier stiffness9, curvature20, and impingement force20, as well as biochemical factors, such as modulators of the cytoskeleton and membrane microenvironment where the interacting molecules reside and the surface organization of these molecules15,17,19.
The method has also been used to study the concurrent binding of dual receptor-ligand species3,4, and trimolecular interactions19 using a modified model21.
The major advantage of the method is that it allows study of receptors in their native membrane environment. The results could be very different from those obtained using purified receptors17. It also allows study of the receptor-ligand interactions in a sub-second timescale with temporal resolution well beyond the typical biochemical methods.
To illustrate the micropipette adhesion frequency method, we show kinetics measurement of intercellular adhesion molecule 1 (ICAM-1) functionalized on RBCs binding to integrin &alpha;L&beta;2 on neutrophils with dimeric E-selectin in the solution to activate &alpha;L&beta;2.

Adhesion Frequency Assay for In Situ Kinetics Analysis of Cross-Junctional Molecular Interactions at the Cell-Cell Interface

An adhesion frequency assay for measuring receptor-ligand interaction kinetics when both molecules are anchored on the surfaces of the interacting cells is described. This mechanically-based assay is exemplified using a micropipette-pressurized human red blood cell as adhesion sensor and integrin &alpha;L&beta;2 and intercellular adhesion molecule-1 as interacting receptors and ligands.

粘附频率含量为原位跨交界的分子相互作用，在细胞与细胞界面的动力学分析

The micropipette adhesion assay was developed in 1998 to measure two-dimensional (2D) receptor-ligand binding kinetics1. The assay uses a human red blood ...

Using Cell-substrate Impedance and Live Cell Imaging to Measure Real-time Changes in Cellular Adhesion and De-adhesion Induced by Matrix Modification

Cell-matrix adhesion plays a key role in controlling cell morphology and signaling. Stimuli that disrupt cell-matrix adhesion (e.g., myeloperoxidase and other matrix-modifying oxidants/enzymes released during inflammation) are implicated in triggering pathological changes in cellular function, phenotype and viability in a number of diseases. Here, we describe how cell-substrate impedance and live cell imaging approaches can be readily employed to accurately quantify real-time changes in cell adhesion and de-adhesion induced by matrix modification (using endothelial cells and myeloperoxidase as a pathophysiological matrix-modifying stimulus) with high temporal resolution and in a non-invasive manner. The xCELLigence cell-substrate impedance system continuously quantifies the area of cell-matrix adhesion by measuring the electrical impedance at the cell-substrate interface in cells grown on gold microelectrode arrays. Image analysis of time-lapse differential interference contrast movies quantifies changes in the projected area of individual cells over time, representing changes in the area of cell-matrix contact. Both techniques accurately quantify rapid changes to cellular adhesion and de-adhesion processes. Cell-substrate impedance on microelectrode biosensor arrays provides a platform for robust, high-throughput measurements. Live cell imaging analyses provide additional detail regarding the nature and dynamics of the morphological changes quantified by cell-substrate impedance measurements. These complementary approaches provide valuable new insights into how myeloperoxidase-catalyzed oxidative modification of subcellular extracellular matrix components triggers rapid changes in cell adhesion, morphology and signaling in endothelial cells. These approaches are also applicable for studying cellular adhesion dynamics in response to other matrix-modifying stimuli and in related adherent cells (e.g., epithelial cells).

Here, we present a protocol to continuously quantify cell adhesion and de-adhesion processes with high temporal resolution in a non-invasive manner by cell-substrate impedance and live cell imaging analyses. These approaches reveal the dynamics of cell adhesion/de-adhesion processes triggered by matrix modification and their temporal relationship to adhesion-dependent signaling events.

使用Cell-基板阻抗和活细胞成像，以衡量矩阵修改诱导实时变化的细胞粘附和去粘附

Cell-matrix adhesion plays a key role in controlling cell morphology and signaling. Stimuli that disrupt cell-matrix adhesion (e.g., myeloperoxidase and ...

Controlled Microfluidic Environment for Dynamic Investigation of Red Blood Cell Aggregation

Blood, as a non-Newtonian biofluid, represents the focus of numerous studies in the hemorheology field. Blood constituents include red blood cells, white blood cells and platelets that are suspended in blood plasma. Due to the abundance of the RBCs (40% to 45% of the blood volume), their behavior dictates the rheological behavior of blood especially in the microcirculation. At very low shear rates, RBCs are seen to assemble and form entities called aggregates, which causes the non-Newtonian behavior of blood. It is important to understand the conditions of the aggregates formation to comprehend the blood rheology in microcirculation. The protocol described here details the experimental procedure to determine quantitatively the RBC aggregates in microcirculation under constant shear rate, based on image processing. For this purpose, RBC-suspensions are tested and analyzed in 120 x 60 &#181;m poly-dimethyl-siloxane (PDMS) microchannels. The RBC-suspensions are entrained using a second fluid in order to obtain a linear velocity profile within the blood layer and thus achieve a wide range of constant shear rates. The shear rate is determined using a micro Particle Image Velocimetry (&#181;PIV) system, while RBC aggregates are visualized using a high speed camera. The videos captured of the RBC aggregates are analyzed using image processing techniques in order to determine the aggregate sizes based on the images intensities.

The protocol described details an experimental procedure to quantify Red Blood Cell (RBC) aggregates under a controlled and constant shear rate, based on image processing techniques. The goal of this protocol is to relate RBC aggregate sizes to the corresponding shear rate in a controlled microfluidic environment.

微流控控制环境的红细胞聚集动态调查

Blood, as a non-Newtonian biofluid, represents the focus of numerous studies in the hemorheology field. Blood constituents include red blood cells, white ...

Wet Chemistry and Peptide Immobilization on Polytetrafluoroethylene for Improved Cell-adhesion

Endowing materials surface with cell-adhesive properties is a common strategy in biomaterial research and tissue engineering. This is particularly interesting for already approved polymers that have a long standing use in medicine because these materials are well characterized and legal issues associated with the introduction of newly synthesized polymers may be avoided. Polytetrafluoroethylene (PTFE) is one of the most frequently employed materials for the manufacturing of vascular grafts but the polymer lacks cell adhesion promoting features. Endothelialization, i.e., complete coverage of the grafts inner surface with a confluent layer of endothelial cells is regarded key to optimal performance, mainly by reducing thrombogenicity of the artificial interface.
This study investigates the growth of endothelial cells on peptide-modified PTFE and compares these results to those obtained on unmodified substrate. Coupling with the endothelial cell adhesive peptide Arg-Glu-Asp-Val (REDV) is performed via activation of the fluorin-containing polymer using the reagent sodium naphthalenide, followed by subsequent conjugation steps. Cell culture is accomplished using Human Umbilical Vein Endothelial Cells (HUVECs) and excellent cellular growth on peptide-immobilized material is demonstrated over a two-week period.

Cell-adhesiveness is key to many approaches in biomaterial research and tissue engineering. A step-by-step technique is presented using wet-chemistry for the surface modification of the important polymer PTFE with peptides.

湿化学和肽固定在聚四氟乙烯为改善细胞粘附

Endowing materials surface with cell-adhesive properties is a common strategy in biomaterial research and tissue engineering. This is particularly ...

3D Magnetic Stem Cell Aggregation and Bioreactor Maturation for Cartilage Regeneration

Cartilage engineering remains a challenge due to the difficulties in creating an in vitro functional implant similar to the native tissue. An approach recently explored for the development of autologous replacements involves the differentiation of stem cells into chondrocytes. To initiate this chondrogenesis, a degree of compaction of the stem cells is required; hence, we demonstrated the feasibility of magnetically condensing cells, both within thick scaffolds and scaffold-free, using miniaturized magnetic field sources as cell attractors. This magnetic approach was also used to guide aggregate fusion and to build scaffold-free, organized, three-dimensional (3D) tissues several millimeters in size. In addition to having an enhanced size, the tissue formed by magnetic-driven fusion presented a significant increase in the expression of collagen II, and a similar trend was observed for aggrecan expression. As the native cartilage was subjected to forces that influenced its 3D structure, dynamic maturation was also performed. A bioreactor that provides mechanical stimuli was used to culture the magnetically seeded scaffolds over a 21-day period. Bioreactor maturation largely improved chondrogenesis into the cellularized scaffolds; the extracellular matrix obtained under these conditions was rich in collagen II and aggrecan. This work outlines the innovative potential of magnetic condensation of labeled stem cells and dynamic maturation in a bioreactor for improved chondrogenic differentiation, both scaffold-free and within polysaccharide scaffolds.

Chondrogenesis from stem cells requires fine tuning the culture conditions. Here, we present a magnetic approach for condensing cells, an essential step to initiate chondrogenesis. In addition, we show that dynamic maturation in a bioreactor applies mechanical stimulation to the cellular constructs and enhances cartilaginous extracellular matrix production.

3D磁干细胞聚集和生物反应器为成熟软骨再生

Cartilage engineering remains a challenge due to the difficulties in creating an in vitro functional implant similar to the native tissue. An approach ...

Development of Microfluidic Devices to Study the Elongation Capability of Tip-growing Plant Cells in Extremely Small Spaces

In vivo, tip-growing plant cells need to overcome a series of physical barriers; however, researchers lack the methodology to visualize cellular behavior in such restrictive conditions. To address this issue, we have developed growth chambers for tip-growing plant cells that contain a series of narrow, micro-fabricated gaps (~1 &#181;m) in a poly-dimethylsiloxane (PDMS) substrate. This transparent material allows the user to monitor tip elongation processes in individual cells during microgap penetration by time-lapse imaging. Using this experimental platform, we observed morphological changes in pollen tubes as they penetrated the microgap. We captured the dynamic changes in the shape of a fluorescently labeled vegetative nucleus and sperm cells in a pollen tube during this process. Furthermore, we demonstrated the capability of root hairs and moss protonemata to penetrate the 1 &#181;m gap. This in vitro platform can be used to study how individual cells respond to physically constrained spaces and may provide insights into tip-growth mechanisms.

We describe a method to investigate the capability of tip-growing plant cells, including pollen tubes, root hairs, and moss protonemata, to elongate through extremely narrow gaps (~1 &#181;m) in a microfluidic device.

微流控装置在极小空间中研究尖端生长植物细胞的伸长能力

In vivo, tip-growing plant cells need to overcome a series of physical barriers; however, researchers lack the methodology to visualize cellular behavior ...

Detection of Endotoxin in Nano-formulations Using Limulus Amoebocyte Lysate (LAL) Assays

When present in pharmaceutical products, a Gram-negative bacterial cell wall component endotoxin (often also called lipopolysaccharide) can cause inflammation, fever, hypo- or hypertension, and, in extreme cases, can lead to tissue and organ damage that may become fatal. The amounts of endotoxin in pharmaceutical products, therefore, are strictly regulated. Among the methods available for endotoxin detection and quantification, the Limulus Amoebocyte Lysate (LAL) assay is commonly used worldwide. While any pharmaceutical product can interfere with the LAL assay, nano-formulations represent a particular challenge due to their complexity. The purpose of this paper is to provide a practical guide to researchers inexperienced in estimating endotoxins in engineered nanomaterials and nanoparticle-formulated drugs. Herein, practical recommendations for performing three LAL formats including turbidity, chromogenic and gel-clot assays are discussed. These assays can be used to determine endotoxin contamination in nanotechnology-based drug products, vaccines, and adjuvants.

Detection of Endotoxin in Nano-formulations Using Limulus Amoebocyte Lysate LAL Assays

Detection of endotoxins in engineered nanomaterials represents one of the grand challenges in the field of nanomedicine. Here, we present a case study that describes the framework composed of three different LAL formats to estimate potential endotoxin contamination in nanoparticles.

用利穆鲁布莱巴细胞裂解液 (lal) 法检测纳米配方中的内毒素

When present in pharmaceutical products, a Gram-negative bacterial cell wall component endotoxin (often also called lipopolysaccharide) can cause ...

A Multilayer Microfluidic Platform for the Conduction of Prolonged Cell-Free Gene Expression

The limitations of cell-based synthetic biology are becoming increasingly apparent as researchers aim to develop larger and more complex synthetic genetic regulatory circuits. The analysis of synthetic genetic regulatory networks in vivo is time consuming and suffers from a lack of environmental control, with exogenous synthetic components interacting with host processes resulting in undesired behavior. To overcome these issues, cell-free characterization of novel circuitry is becoming more prevalent. In vitro transcription and translation (IVTT) mixtures allow the regulation of the experimental environment and can be optimized for each unique system. The protocols presented here detail the fabrication of a multilayer microfluidic device that can be utilized to sustain IVTT reactions for prolonged durations. In contrast to batch reactions, where resources are depleted over time and (by-) products accumulate, the use of microfluidic devices allows the replenishment of resources as well as the removal of reaction products. In this manner, the cellular environment is emulated by maintaining an out-of-equilibrium environment in which the dynamic behavior of gene circuits can be investigated over extended periods of time. To fully exploit the multilayer microfluidic device, hardware and software have been integrated to automate the IVTT reactions. By combining IVTT reactions with the microfluidic platform presented here, it becomes possible to comprehensively analyze complex network behaviors, furthering our understanding of the mechanisms that regulate cellular processes.

The fabrication process of a PDMS-based, multilayer, microfluidic device that allows in vitro transcription and translation (IVTT) reactions to be performed over prolonged periods is described. Furthermore, a comprehensive overview of the hardware and software required to automate and maintain these reactions for prolonged durations is provided.

用于长期无细胞基因表达传导的多层微流体平台

The limitations of cell-based synthetic biology are becoming increasingly apparent as researchers aim to develop larger and more complex synthetic genetic ...