Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

CMP as large surface area materials have attracted growing interest recently, due to their high variability in the incorporation of functional groups in ...

Karlsruhe Institute of Technology

A new strategy for the radiolabeling of porous nanocontainers has been developed, and the first experiments in vivo are reported. Our approach consists of the use of nanometer-sized zeolites whose channels have been filled with the positively charged gamma-emitter (111)In(3+) via simple ion exchange. To avoid leaching of the isotope under physiological conditions, the entrances of the channels have been closed using a specifically designed molecular stopcock. This stopcock has a positively charged group that enters the channels and entraps the loaded radionuclides via electrostatic and steric repulsion. The other side of the stopcock is a bulky triethoxysilane group that can covalently bind to the walls of the zeolite entrances, thereby irreversibly closing the channels. The surface of the zeolites has been functionalized with different chemical groups in order to investigate the different biodistributions depending of the nature of the functionalizations. Preliminary in vivo experiments with Wistar rats have been performed and showed the potential of the approach. This strategy leads to a nanoimaging probe with a very high density of radioisotopes in a confined space, which is highly stable in physiological solution and could allow a large variety of functionalities on its external surface.

Encapsulating (111)In in nanocontainers for scintigraphic imaging: synthesis, characterization, and in vivo biodistribution.

Dynamic microcrystal assembly by nitroxide exchange reactions.

A new strategy to synthesize monodispersed porous coordination polymer (PCP) nanocrystals at room temperature was developed and utilized for the formation of PCP thin films on gold substrates with fine control over the crystal sizes using the coordination modulation method. Hybridization of these PCP thin films with an environment-controlled quartz crystal microbalance system allowed determining the adsorption properties for organic vapors (methanol and hexane). In the case of high sensitivity (at the low-concentration dosing of analytes), the sensor response depended on the crystal size but not on the type of analyte. In contrast, at the high-concentration dosing, a clear dependence of the sorption kinetics on the analyte was observed due to significant sorbate-sorbate interaction.

Porous coordination polymer hybrid device with quartz oscillator: effect of crystal size on sorption kinetics.

The spatial organization of porous coordination polymer (PCP) crystals into higher-order structures is critical for their integration into separation systems, heterogeneous catalysts, ion/electron transport and photonic devices. Here, we demonstrate a rapid method to spatially control the nucleation site, leading to the formation of mesoscopic architecture made of PCPs, in both two and three dimensions. Inspired by geological processes, this method relies on the morphological replacement of a shaped sacrificial metal oxide used both as a metal source and as an 'architecture-directing agent' by an analogous PCP architecture. Spatiotemporal harmonization of the metal oxide dissolution and the PCP crystallization allowed the preservation of very fine mineral morphological details of periodic alumina inverse opal structures. The replication of randomly structured alumina aerogels resulted in a PCP architecture with hierarchical porosity in which the hydrophobic micropores of the PCP and the mesopores/macropores inherited from the parent aerogels synergistically enhanced the material's selectivity and mass transfer for water/ethanol separation.

Mesoscopic architectures of porous coordination polymers fabricated by pseudomorphic replication.

Information about the mechanisms underlying the interactions of nanoparticles with living cells is crucial for their medical application and also provides indications of the putative toxicity of such materials. Here the uptake and intracellular delivery of disc-shaped zeolite L nanocrystals as porous aminosilicates with well-defined crystal structure, uncoated as well as with COOH-, NH2 -, polyethyleneglycol (PEG)- and polyallylamine hydrochloride (PAH) surface coatings are reported. HeLa cells are used as a model system to demonstrate the relation between these particles and cancer cells. Interactions are studied in terms of their fates under diverse in vitro cell culture conditions. Differently charged coatings demonstrated dissimilar behavior in terms of agglomeration in media, serum protein adsorption, nanoparticle cytotoxicity and cell internalization. It is also found that functionalized disc-shaped zeolite L particles enter the cancer cells via different, partly not yet characterized, pathways. These in vitro results provide additional insight about low-aspect ratio anisotropic nanoparticle interactions with cancer cells and demonstrate the possibility to manipulate the interactions of nanoparticles and cells by surface coating for the use of nanoparticles in medical applications.

Internalization pathways of anisotropic disc-shaped zeolite L nanocrystals with different surface properties in HeLa cancer cells.

Understanding the sorption kinetics of nanoporous systems is crucial for the development and design of novel porous materials for practical applications. Here, using a porous coordination polymer/quartz crystal microbalance (PCP/QCM) hybrid device, we investigate the desorption of various vapor molecules featuring different degrees of intermolecular (hydrogen bonding) or molecule-framework interactions. Our findings reveal that strong intermolecular interactions lead to the desorption process proceeding via an unprecedented metastable state, wherein the guest molecules are clustered within the pores, causing the desorption rate to be temporarily slowed. The results demonstrate the considerable impact of the chemical nature of an adsorbate on the kinetics of desorption, which is also expected to influence the efficiency of certain processes, such as desorption by gas purge.

Impact of molecular clustering inside nanopores on desorption processes.

We report the fabrication of 3D, highly porous, covalently bound polymer films of homogeneous thickness. These surface-bound gels combine the advantages of metal-organic framework (MOF) materials, namely, the enormous flexibility and the large size of the maximum pore structures and, in particular, the possibility to grow them epitaxially on modified substrates, with those of covalently connected gel materials, namely, the absence of metal ions in the deposited material, a robust framework consisting of covalent bonds, and, most importantly, pronounced stability under biological conditions. The conversion of a SURMOF (surface-mounted MOF) yields a surface-grafted gel. These SURGELs can be loaded with bioactive compounds and applied as bioactive coatings and provide a drug-release platform in in vitro cell culture studies.

Fabrication of highly uniform gel coatings by the conversion of surface-anchored metal-organic frameworks.

The controlled synthesis of hierarchically functionalized core/multishell particles is highly desirable for applications in medicine, catalysis, and separation. Here, we describe the synthesis of hierarchically structured metal-organic framework multishells around magnetic core particles (magMOFs) via layer-by-layer (LbL) synthesis. The LbL deposition enables the design of multishell systems, where each MOF shell can be modified to install different functions. Here, we used this approach to create controlled release capsules, in which the inner shell serves as a reservoir and the outer shell serves as a membrane after postsynthetic conversion of the MOF structure to a polymer network. These capsules enable the controlled release of loaded dye molecules, depending on the surrounding media.

Manuel Tsotsalas

Institute of Functional Interfaces

Karlsruhe Institute of Technology

Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

Manuel Tsotsalas

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Institute of Functional Interfaces

Karlsruhe Institute of Technology

Layer-by-layer Synthesis and Transfer of Freestanding Conjugated Microporous Polymer Nanomembranes

Institute of Functional Interfaces